INSTALL(8) NetBSD System Manager's Manual INSTALL(8) NNAAMMEE IINNSSTTAALLLL - Installation procedure for NetBSD/arm32 DDEESSCCRRIIPPTTIIOONN AAbboouutt tthhiiss DDooccuummeenntt This document describes the installation procedure for NetBSD 1.4.2 on the _a_r_m_3_2 platform. It is available in four different formats titled _I_N_S_T_A_L_L_._e_x_t, where _e_x_t is one of _._p_s, _._h_t_m_l, _._m_o_r_e, or _._t_x_t. _._p_s PostScript. _._h_t_m_l Standard internet HTML. _._m_o_r_e The enhanced text format used on Unix-like systems by the more(1) and less(1) pager utility programs. This is the format in which the on-line _m_a_n pages are generally pre- sented. _._t_x_t Plain old ASCII. You are reading the _m_o_r_e version. WWhhaatt iiss NNeettBBSSDD?? The NetBSD Operating System is a fully functional Open Source UN*X-like operating system derived from the Berkeley Networking Release 2 (Net/2), 4.4BSD-Lite, and 4.4BSD-Lite2 sources. NetBSD runs on twenty different system architectures featuring eight distinct families of CPUs, and is being ported to more. The NetBSD 1.4.2 release contains complete binary releases for fifteen different machine types. (The remaining ones are not fully supported at this time and are thus not part of the binary distri- bution. For information on them, please see the NetBSD web site at hhttttpp::////wwwwww..nneettbbssdd..oorrgg//) NetBSD is a completely integrated system. In addition to its highly portable, high performance kernel, NetBSD features a complete set of user utilities, compilers for several languages, The X Window System, and nu- merous other tools, all accompanied by full source code. NetBSD is a creation of the members of the Internet community. Without the unique cooperation and coordination the net makes possible, it's likely that NetBSD wouldn't exist. UUppggrraaddee ppaatthh ttoo NNeettBBSSDD 11..44..22 If you are not installing your system ``from scratch'' but instead are going to upgrade an existing system already running NetBSD you need to know which versions you can upgrade with NetBSD 1.4.2. NetBSD 1.4.2 is an upgrade of NetBSD 1.4.1, NetBSD 1.4 and earlier re- leases of NetBSD such as versions 1.3.3, 1.2 etc. The intermediate development versions of code available on the main trunk in our CVS repository (also known as ``NetBSD-current'') from _a_f_t_e_r the point where the release cycle for 1.4 was started are designated by ver- sion identifiers such as 1.4A, 1.4B, 1.4P etc. These identifiers do not designate releases, but indicate major changes in internal kernel APIs. Note that the kernel from NetBSD 1.4.2 can _n_o_t be used to upgrade a sys- tem running one of those intermediate development versions. Trying to use the NetBSD 1.4.2 kernel on such a system _w_i_l_l in all probability re- sult in problems. Please also note that it is not possible to do a direct ``version'' com- parison between any of the intermediate development versions mentioned above and 1.4.2 to determine if a given feature is present or absent in 1.4.2. The development of 1.4, 1.4.1 and 1.4.2 is done on a separate branch in the CVS repository which was created when the release cylcle for 1.4 was started, and during the release cycles for all these versions selective fixes (with minor impact on the stability of the code on the release branch) have been imported from the main development trunk. So, there are features in 1.4.2 which were not in e.g. 1.4H, but the reverse is also true. MMaajjoorr CChhaannggeess BBeettwweeeenn 11..44..11 aanndd 11..44..22 The complete list of changes between NetBSD 1.4.1 and 1.4.2 can be found in the file CHANGES-1.4.2 in the top directory of the source tree. The following are the highlights only. ++oo A driver for the Alteon Gigabit Ethernet cards has been added, see ti(4). ++oo A driver for the Realtek 8129/8239 Fast Ethernet PCI cards have been added, see rl(4). ++oo A driver for the DPT SmartCache and SmartRAID III or IV SCSI adapters has been added, see dpt(4). ++oo A driver for the BOCA IOAT66 6-port ISA serial adapter has been added, see ioat(4). ++oo Support for the X-surf Amiga board has been added. ++oo Support has been added for ext2fs revision 1, with read-only support for the ``sparse super'' and the ``filetype'' options. ++oo BIND has been upgraded to version 8.2.2-P5. ++oo The IPF packet filtering software has been updated to version 3.3.5. ++oo Tcpdump now does hex/ascii dumps of packet contents if asked to do so. ++oo An implementation of the System V user management utilities has been added. ++oo The name ``errno'' is now always a macro which expands to a function call. This is done to ease the integration of thread libraries with the code in both system and third-party libraries. Please include to access the correct definition of ``errno''. ++oo A utility for making temporary files for shell scripts has been added, see mktemp(1). ++oo The automounter utility amd(8) has been updated to fix a security problem. ++oo A security problem in procfs has been fixed. Procfs is not used by default in NetBSD. ++oo The floating point emulation on the ports using the m68k CPU has been reverted to the version in NetBSD 1.4 (the version in 1.4.1 had prob- lems). ++oo Several subsystems have received substantial work, such as RAIDframe, LFS, and the package tools. In addition, many, many bugs have been fixed -- more than 100 problems reported through our problem tracking system have been fixed, and many other non-reported problems have also been found and fixed. See the CHANGES-1.4.2 file for the complete list. KKnnoowwnn ccaavveeaattss wwiitthh 11..44..22 The following are the major known issues with NetBSD 1.4.2. ++oo The upgrade of ipf(8) caused a change of the kernel API. Thus, if you are using ipf(8) you need to upgrade both the kernel and the us- er-land utilities to control that feature in order for it to work. ++oo As part of fixing a kernel bug, ``struct vfsnode'' needed to change size. This will unfortunately, and contrary to tradition for patch releases, cause incompatibilities for users of file system LKMs com- piled for 1.4 and 1.4.1. ++oo Although LFS has been improved between 1.4.1 and 1.4.2, it can proba- bly still be characterized as being of ``beta test'' quality, e.g. filling the file system still gives ``interesting'' effects. It should probably not be used to store critical data quite yet. ++oo The version of the IPF packet filtering software in NetBSD 1.4.2 must be enabled with ``ipf -E'' before filtering or NAT rules can be set. Failure to do so may result in a panic. MMaajjoorr CChhaannggeess BBeettwweeeenn 11..44 aanndd 11..44..11 The complete list of changes between NetBSD 1.4 and 1.4.1 can be found in the file CHANGES-1.4.1 in the top directory of the source tree. ++oo The NetBSD/alpha port's compatibility for Digital UNIX executables has been greatly improved. ++oo Many bug fixes and improvements of the installation tools and utili- ties. ++oo Support for more PCI serial/parallel cards has been added. ++oo It is now possible to boot NetBSD/i386 on systems with 1GB of RAM. ++oo The floating point emulation on the ports using the m68k CPU has been upgraded. ++oo A fatal problem with /dev/random has been found and fixed. ++oo Support for Alpha 21264 ev6 based systems has been added to NetB- SD/alpha. MMaajjoorr CChhaannggeess BBeettwweeeenn 11..33 aanndd 11..44 The NetBSD 1.4 release is a substantial improvement over its predeces- sors. We have provided numerous significant functional enhancements, in- cluding support for many new devices, integration of hundreds of bug fix- es, new and updated kernel subsystems, and many userland enhancements. The results of these improvements is a stable operating system fit for production use that rivals most commercially available systems. It is impossible to completely summarize the nearly two years of develop- ment that went into the NetBSD 1.4 release. Some highlights include: ++oo Substantial improvements in the TCP/IP implementation, including nu- merous performance enhancements and bug fixes by Jason Thorpe and others. ++oo A new, high efficiency kernel memory pool allocator by Paul Kranen- burg. This has been integrated into most kernel subsystems. ++oo A new, totally rewritten virtual memory subsystem, UVM, created by Chuck Cranor, which is substantially cleaner and better performing than the old Mach derived VM subsystem. ++oo Improved POSIX and XPG standards compliance. ++oo Completion of the integration of all remaining 4.4BSD Lite-2 kernel improvements and bug fixes that had not been previously integrated. (Integration of all userland components was completed before NetBSD 1.3) ++oo Several new ports, including macppc, bebox, sparc64, next68k, and others, have been integrated into the source tree. ++oo The system compilers have been upgraded to egcs 1.1.1, and the system compiler toolchain now (mostly) uses the latest versions of GNU binu- tils instead of the obsolete versions left over from 4.4BSD Lite. ++oo Everyone's favorite ftp(1) client has been improved even further. See the man page for details. ++oo A new architecture independent console driver, wscons(4), has been integrated into many ports. ++oo Numerous improvements have been made to the audio subsystem support, including support for MIDI device drivers. ++oo Linux compatibility support has been improved. ++oo A number of scheduler enhancements have yielded dramatic improvements in interactive performance and better control of background tasks. ++oo Several network tunneling protocols, including GRE and IP in IP, have been implemented. ++oo Kernel support for the CODA distributed file system has been added. ++oo Manuel Bouyer completed major changes to the IDE support. It is now architecture independent. Major changes have been made to the IDE code for better error handling, improved ATAPI support, 32 bit data I/O support and bus-master DMA support on PCI IDE controllers. ++oo Lennart Augustsson has added full USB support, permitting the use of a wide variety of Universal Serial Bus peripherals. The drivers should easily port to any future platforms that support the PCI bus. See usb(4) for an overview. ++oo RAIDframe, version 1.1, from the Parallel Data Laboratory at Carnegie Mellon University, has been integrated. Supports RAID levels 0, 1, 4, 5, and more. ++oo Luke Mewburn added nsswitch.conf(5) functionality to the system to specify the search order for system databases. ++oo syslogd(8) now supports listening on multiple sockets, to make the chrooting of servers easier. ++oo Most third party packages have been updated to the latest stable re- lease. As has been noted, there have also been innumerable bug fixes. Kernel interfaces have continued to be refined, and more subsystems and device drivers are shared among the different ports. You can look for this trend to continue. NetBSD/arm32 1.4.2 has a number of improvements over the last release. Support has been added for the following hardware platforms: ++oo Digital DNARD (DIGITAL Network Appliance Reference Design) also know as SHARK. ++oo Intel EBSA285 (SA110/DC21825 evaluation boards) ++oo Chalice CATS (SA110/DC21825 PC style motherboard) Additionally there has also been: ++oo Various code optimizations, in particular improvements in interrupt latencies and improved cache cleaning. ++oo New drivers. ++oo Bug fixes. ++oo full integration of the toolchain. NetBSD 1.4.2 on arm32 is, as usual, also fully backward compatible with old NetBSD arm32 binaries, so you don't need to recompile all your local programs provided you set the appropriate binary compatibility options in your kernel configuration. TThhee FFuuttuurree ooff NNeettBBSSDD The NetBSD Foundation has been incorporated as a non-profit organization. Its purpose is to encourage, foster and promote the free exchange of com- puter software, namely the NetBSD Operating System. The foundation will allow for many things to be handled more smoothly than could be done with our previous informal organization. In particular, it provides the framework to deal with other parties that wish to become involved in the NetBSD Project. The NetBSD Foundation will help improve the quality of NetBSD by: ++oo providing better organization to keep track of development efforts, including co-ordination with groups working in related fields. ++oo providing a framework to receive donations of goods and services and to own the resources necessary to run the NetBSD Project. ++oo providing a better position from which to undertake promotional ac- tivities. ++oo periodically organizing workshops for developers and other interested people to discuss ongoing work. We intend to begin narrowing the time delay between releases. Our ambi- tion is to provide a full release every six to eight months. We hope to support even _m_o_r_e hardware in the future, and we have a rather large number of other ideas about what can be done to improve NetBSD. We intend to continue our current practice of making the NetBSD-current development source available on a daily basis. In addition, Anonymous CVS access to the NetBSD source tree has been added since NetBSD 1.4.1; see hhttttpp::////wwwwww..nneettbbssdd..oorrgg//CChhaannggeess//##aannoonnccvvss--aavvaaiillaabbllee We have also added a browsable CVS repository on the web at hhttttpp::////ccvvsswweebb..nneettbbssdd..oorrgg//ccggii--bbiinn//ccvvsswweebb..ccggii// We intend to integrate free, positive changes from whatever sources sub- mit them, providing that they are well thought-out and increase the us- ability of the system. Above all, we hope to create a stable and accessible system, and to be responsive to the needs and desires of NetBSD users, because it is for and because of them that NetBSD exists. SSoouurrcceess ooff NNeettBBSSDD Please refer to hhttttpp::////wwwwww..nneettbbssdd..oorrgg//SSiitteess//nneett..hhttmmll. NNeettBBSSDD 11..44..22 RReelleeaassee CCoonntteennttss The root directory of the NetBSD 1.4.2 release is organized as follows: _._._._/_N_e_t_B_S_D_-_1_._4_._2_/ BUGS Known bugs list (somewhat incomplete and out of date). CHANGES Changes since earlier NetBSD releases. LAST_MINUTE Last minute changes. MIRRORS A list of sites that mirror the NetBSD 1.4.2 distribution. README.files README describing the distribution's contents. TODO NetBSD's todo list (also somewhat incomplete and out of date). patches/ Post-release source code patches. source/ Source distribution sets; see below. In addition to the files and directories listed above, there is one di- rectory per architecture, for each of the architectures for which NetBSD 1.4.2 has a binary distribution. There are also 'README.export- control' files sprinkled liberally throughout the distribution tree, which point out that there are some portions of the distribution (i.e. the `domestic' portion) that may be subject to export regulations of the United States. It is your responsibility to determine whether or not it is legal for you to export these portions and to act accordingly. The NetBSD project maintains a web page at hhttttpp::////wwwwww..NNeettBBSSDD..OORRGG//MMiisscc//ccrryyppttoo--eexxppoorrtt..hhttmmll which should contain up-to-date information on this issue. The source distribution sets can be found in subdirectories of the "source" subdirectory of the distribution tree. They contain the complete sources to the system. The source distribution sets are as follows: secrsrc.tgz: This set contains the "domestic" sources. These sources may be subject to United States export regulations. _4_2_1_K _g_z_i_p_p_e_d_, _2_M _u_n_c_o_m_p_r_e_s_s_e_d gnusrc.tgz: This set contains the "gnu" sources, including the source for the compiler, assembler, groff, and the other GNU utilities in the binary distribution sets. _1_9_M _g_z_i_p_p_e_d_, _8_4_._3_M _u_n_c_o_m_p_r_e_s_s_e_d syssrc.tgz: This set contains the sources to the NetBSD 1.4.2 ker- nel, config(8), and dbsym(8). _1_3_._9_M _g_z_i_p_p_e_d_, _6_8_._3_M _u_n_c_o_m_p_r_e_s_s_e_d sharesrc.tgz: This set contains the "share" sources, which include the sources for the man pages not associated with any par- ticular program, the sources for the typesettable docu- ment set, the dictionaries, and more. _3_M _g_z_i_p_p_e_d_, _1_1_._9_M _u_n_c_o_m_p_r_e_s_s_e_d src.tgz: This set contains all of the NetBSD 1.4.2 sources which are not mentioned above. _1_4_._4_M _g_z_i_p_p_e_d_, _6_7_._4_M _u_n_c_o_m_p_r_e_s_s_e_d Most of the above source sets are located in the _s_o_u_r_c_e_/_s_e_t_s subdirectory of the distribution tree. The secrsrc.tgz set is contained in the _s_o_u_r_c_e_/_s_e_c_u_r_i_t_y subdirectory. This set, which may only be available to users in the United States and Canada, contains the sources normally found in _/_u_s_r_/_s_r_c_/_d_o_m_e_s_t_i_c - primarily Kerberos and other cryptographic security related software. (Remember, because of United States law, it may not be legal to distribute this set to locations outside of the Unit- ed States and Canada. Again, see hhttttpp::////wwwwww..NNeettBBSSDD..OORRGG//MMiisscc//ccrryyppttoo--eexxppoorrtt..hhttmmll for updated information on this issue.) The source sets are distributed as compressed tar files. They may be un- packed into _/_u_s_r_/_s_r_c with the command: ccaatt sseett__nnaammee..ttggzz || gguunnzziipp || ((ccdd //;; ttaarr xxppff -- )) The _s_e_t_s_/_S_p_l_i_t_/ and _s_e_c_u_r_i_t_y_/_S_p_l_i_t_/ subdirectories contain split versions of the source sets for those users who need to load the source sets from floppy or otherwise need a split distribution. The split sets are are named "set_name.xx" where "set_name" is the distribution set name, and "xx" is the sequence number of the file, starting with "aa" for the first file in the distribution set, then "ab" for the next, and so on. All of these files except the last one of each set should be exactly 240,640 bytes long. (The last file is just long enough to contain the remainder of the data for that distribution set.) The split distributions may be reassembled and extracted with ccaatt as follows: ccaatt sseett__nnaammee..???? || gguunnzziipp || ((ccdd //;; ttaarr xxppff -- )) In each of the source distribution set directories, there is a file named _C_K_S_U_M_S which contains the checksums of the files in that directory, as generated by the cksum(1) utility. You can use cksum to check the in- tegrity of the archives, if you suspect that one of the files is corrupt and have access to a cksum binary. Checksums based on other algorithms may also be present - see the release(7) man page for details. _N_e_t_B_S_D_/_a_r_m_3_2 _S_u_b_d_i_r_e_c_t_o_r_y _S_t_r_u_c_t_u_r_e The arm32-specific portion of the NetBSD 1.4.2 release is found in the _a_r_m_3_2 subdirectory of the distribution: _._._._/_N_e_t_B_S_D_-_1_._4_._2_/_a_r_m_3_2_/ _I_N_S_T_A_L_L_._h_t_m_l _I_N_S_T_A_L_L_._p_s _I_N_S_T_A_L_L_._t_x_t _I_N_S_T_A_L_L_._m_o_r_e Installation notes; this file. The _._m_o_r_e file contains underlined text using the more(1) conventions for indicat- ing italic and bold display. _b_i_n_a_r_y_/ _s_e_t_s_/ arm32 binary distribution sets; see below. _s_e_c_u_r_i_t_y_/ arm32 security distribution; see below. _i_n_s_t_a_l_l_a_t_i_o_n_/ _k_e_r_n_e_l_s_/ arm32 installation and other kernels; see be- low. _p_l_a_t_f_o_r_m_/ Miscellaneous arm32 installation utilities and supplementary documentation for _p_l_a_t_f_o_r_m; see installation section, below. There are a collection of arm32 kernels in the "arm32/kernels" subdirec- tory of the NetBSD 1.4.2 distribution. Some of these kernels contain a root file system image and should only be used for the initial installa- tion. Some of the kernels only support a particular subset of the plat- forms that arm32 supports (See "arm32/kernels/README" for more details.) _B_i_n_a_r_y _D_i_s_t_r_i_b_u_t_i_o_n _S_e_t_s The NetBSD arm32 binary distribution sets contain the binaries which com- prise the NetBSD 1.4.2 release for the arm32. There are eight binary dis- tribution sets and the _s_e_c_u_r_i_t_y distribution set. The binary distribu- tion sets can be found in the _a_r_m_3_2_/_b_i_n_a_r_y_/_s_e_t_s subdirectory of the NetBSD 1.4.2 distribution tree, and are as follows: bbaassee The NetBSD 1.4.2 arm32 bbaassee binary distribution. You _m_u_s_t install this distribution set. It contains the base NetBSD utilities that are necessary for the system to run and be minimally functional. It includes shared library support, and excludes everything described below. _1_3_._1_M _g_z_i_p_p_e_d_, _3_3_._5_M _u_n_c_o_m_p_r_e_s_s_e_d ccoommpp Things needed for compiling programs. This set includes the system include files (_/_u_s_r_/_i_n_c_l_u_d_e) and the various system libraries (except the shared libraries, which are included as part of the bbaassee set). This set also includes the manual pages for all of the utilities it contains, as well as the system call and library manual pages. _9_._2_M _g_z_i_p_p_e_d_, _3_0_._5_M _u_n_c_o_m_p_r_e_s_s_e_d eettcc This distribution set contains the system configuration files that reside in _/_e_t_c and in several other places. This set _m_u_s_t be installed if you are installing the system from scratch, but should _n_o_t be used if you are upgrading. (If you are upgrading, it's recommended that you get a copy of this set and _c_a_r_e_f_u_l_l_y upgrade your configuration files by hand.) _5_7_K _g_z_i_p_p_e_d_, _3_3_0_K _u_n_c_o_m_p_r_e_s_s_e_d ggaammeess This set includes the games and their manual pages. _2_._9_M _g_z_i_p_p_e_d_, _7_._1_M _u_n_c_o_m_p_r_e_s_s_e_d mmaann This set includes all of the manual pages for the binaries and other software contained in the bbaassee set. Note that it does not include any of the manual pages that are included in the other sets. _4_M _g_z_i_p_p_e_d_, _1_5_._9_M _u_n_c_o_m_p_r_e_s_s_e_d mmiisscc This set includes the (rather large) system dictionaries, the typesettable document set, and other files from _/_u_s_r_/_s_h_a_r_e. _2_._2_M _g_z_i_p_p_e_d_, _8_._4_M _u_n_c_o_m_p_r_e_s_s_e_d tteexxtt This set includes NetBSD's text processing tools, including groff(1), all related programs, and their manual pages. _1_._3_M _g_z_i_p_p_e_d_, _4_._6_M _u_n_c_o_m_p_r_e_s_s_e_d The arm32 security distribution set is named sseeccrr and can be found in the _a_r_m_3_2_/_b_i_n_a_r_y_/_s_e_c_u_r_i_t_y subdirectory of the NetBSD 1.4.2 distribution tree. It contains security- related binaries which depend on cryptographic source code. You do not need this distribution set to use encrypted passwords in your password file; the bbaassee distribution includes a crypt library which can perform only the one-way encryption function. The security distribution includes a version of the Kerberos IV network security system, and a Kerberized version of telnet(1) program. The sseeccrr distribution set can be found only on those sites which carry the complete NetBSD distribution and which can legally obtain it. Because of United States law, it may not be legal to distribute this set to locations outside of the United States and Canada. See hhttttpp::////wwwwww..NNeettBBSSDD..OORRGG//MMiisscc//ccrryyppttoo--eexxppoorrtt..hhttmmll for updated information on this issue. NetBSD maintains its own set of sources for the X Window System in order to assure tight integration and compatibility. These sources are based on XFree86, and tightly track XFree86 releases. They are currently equivalent to XFree86 3.3.6. Binary sets for the X Window system are distributed with NetBSD. The sets are: xxbbaassee The basic files needed for a complete X client environment. This does not include the X servers. _2_._9_M _g_z_i_p_p_e_d _8_._6_M _u_n_c_o_m_p_r_e_s_s_e_d xxccoommpp The extra libraries and include files needed to compile X source code. _1_._9_M _g_z_i_p_p_e_d_, _7_._7_M _u_n_c_o_m_p_r_e_s_s_e_d xxccoonnttrriibb Programs that were contributed to X. _2_0_2_k _g_z_i_p_p_e_d_, _6_6_0_k _u_n_c_o_m_p_r_e_s_s_e_d xxffoonntt Fonts needed by X. _5_._7_M _g_z_i_p_p_e_d_, _7_._0_M _u_n_c_o_m_p_r_e_s_s_e_d The arm32 binary distribution sets are distributed as gzipped tar files named with the extension ..ttggzz, e.g. _b_a_s_e_._t_g_z. The instructions given for extracting the source sets work equally well for the binary sets, but it is worth noting that if you use that method, the files are /-relative and therefore are extracted _b_e_l_o_w the current directory. That is, if you want to extract the binaries into your system, i.e. replace the system binaries with them, you have to run the ttaarr xxffpp command from /. _N_o_t_e Each directory in the arm32 binary distribution also has its own checksum files, just as the source distribution does: All BSDSUM files are historic BSD checksums for the various files in that directory, in the format produced by the command: cckkssuumm --oo 11 _f_i_l_e All CKSUM files are POSIX checksums for the various files in that directory, in the format produced by the command: cckkssuumm _f_i_l_e. All MD5 files are MD5 digests for the various files in that direc- tory, in the format produced by the command: cckkssuumm --mm _f_i_l_e. All SYSVSUM files are historic AT&T System V UNIX checksums for the various files in that directory, in the format produced by the command: cckkssuumm --oo --22 _f_i_l_e. The MD5 digest is the safest checksum, followed by the POSIX checksum. The other two checksums are provided only to ensure that the widest possible range of system can check the integrity of the release files. NNeettBBSSDD//aarrmm3322 SSyysstteemm RReeqquuiirreemmeennttss aanndd SSuuppppoorrtteedd DDeevviicceess NetBSD/arm32 1.4.2 runs on a number of systems with ARM6 or later proces- sors, with or without FPU coprocessor. The minimal configuration is said to require 8M of RAM and 50M of disk space, though we do not know of any- one running with a system quite this minimal today. To install the entire system requires much more disk space (the unpacked binary distribution, without sources, requires at least 65M without counting space needed for swap space, etc), and to run X or compile the system, more RAM is recom- mended. (8M of RAM will actually allow you to run X and/or compile, but it won't be speedy. Note that until you have around 16M of RAM, getting more RAM is more important than getting a faster CPU.) Supported devices include (but is not limited to): RiscPC/A7000(+) floppy controller. IDE controllers: Acorn motherboard IDE. Simtec IDE controller. RapIDE Issue 2 IDE controller. ICS V5 & V6 IDE controller. SCSI host adapters: Cumana SCSI 2. PowerTec SCSI 2. MCS Connect32 SCSI 2. Acorn SCSI. Oak SCSI I. Morley SCSI I (uncached only). VIDC20 video. RiscPC Motherboard serial port. RiscPC Motherboard parallel port. Ethernet adapters: Acorn Ether1. Atomwide Ether3. ANT Ether3. ANT Ether5. Atomwide EtherA. ANT EtherB. Acorn EtherH. I-cubed EtherH. ANT EtherM. Most SCSI disk drives. Most SCSI tape drives. CD-ROM drives: Most SCSI CD-ROM drives. Most ATAPI CD-ROM drives. [ Note: Some low-priced IDE CDROM drives are known for being not or not fully ATAPI compliant, and thus requires some hack (generally an entry to a quirk table) to work with NetBSD.] Mice: RiscPC quadrature mouse. A7000 PS/2 mouse. Processors: ARM 610. ARM 700. ARM 700 + FPA11. ARM 710. ARM 7500. ARM 7500FE. ARM 810. [*] SA110. Motherboards: Acorn RiscPC. Acorn A7000. Acorn A7000+. VLSI RC7500. Digital DNARD. Intel EBSA285. Chalice CATS. Other devices: RiscPC keyboard. A7000 keyboard. RiscPC realtime clock. VLSI RC7500 motherboard devices. Digital DNARD devices IDE keyboard mouse ethernet smartcard audio joystick Chalice CATS devices ALI M1543 southbridge inc PS/2 keyboard & mouse, ide, serial parallel, USB and ISA bus RTC Intel EBSA285 & Chalice CATS PCI devices PCI - PCI bridges DC21150 DC21152 DC21153 DC21154 Hint HB1 Digital DC21x4x-based PCI Ethernet adapters, including: Cogent EM1X0, EM960 (a.k.a. Adaptec ANA-69XX) Cogent EM964 [b] Cogent EM4XX [b] Compex Readylink PCI DANPEX EN-9400P3 Digital Celebris GL, GLST on-board ethernet Digital (DEC) PCI Ethernet/Fast Ethernet adapters (all) JCIS Condor JC1260 Linksys PCI Fast Ethernet SMC EtherPower 10, 10/100 (PCI only!) SMC EtherPower SVEC PN0455 SVEC FD1000-TP Znyx ZX34X Qlogic ISP [12]0x0 SCSI/FibreChannel boards Adaptec AHA-2x4x[U][W] cards using the AIC-7770, AIC-7850, AIC-7860, AIC-7870, or AIC-7880 chip. NE2000 PCI ethernet adapters Universal Serial Bus: UHCI host controllers OHCI host controllers Hubs Keyboards using the boot protocol Mice Printers Generic support for HID devices Video cards Diamond Stealth 3D 2000 Pro ATI Charger 4MB STB Velocity 128 Cirrus Logic 5446 IGS 2010 IGS 5000 S3 based interfaces Drivers for hardware marked with "[*]" are NOT present in installation kernels. Other PCI device may be supported by Intel EBSA285 & Chalice CATS but have not been tested. Support for some devices is limited to particular kernels. eg there is no SA110 support in A7000 kernels. Hardware the we do NOT currently support, but get many questions about: ++oo Acorn/Aleph1 PC cards. ++oo Any SCSI card using a PowerROM. ++oo Podule based serial ports. ++oo Castle SCSI/Ethernet cards. Drivers are planned for some of the above devices. GGeettttiinngg tthhee NNeettBBSSDD SSyysstteemm oonn ttoo UUsseeffuull MMeeddiiaa Installation is supported from several media types, including: ++oo CDROM ++oo DOS Floppy ++oo Tape ++oo Remote NFS partition ++oo FTP No matter which installation medium you choose, you'll need to have an installation kernel and possibly a boot application, see arm32/_p_l_a_t_f_o_r_m/prep for details. Note that, if you are installing or upgrading from a writable media, the media can be write-protected if you wish. These systems mount a root im- age from inside the kernel, and will not need to write to the media. The distribution sets for installation or upgrade depend on which instal- lation medium you choose. The steps for the various media are outlined below. ++oo To install or upgrade NetBSD using CDROM, you need to do the follow- ing: Find out where the distribution set files are on the CDROM. Proceed to the instruction on installation. ++oo To install or upgrade NetBSD using DOS floppies, you need to do the following: Count the number of "set_name.xx" files that make up the distribution sets you want to install or upgrade. You will need that number of 1.44M floppies. Format all of the floppies with DOS. DO NOT make any of them bootable DOS floppies. (If the floppies are bootable, then the DOS system files that make them bootable will take up some space, and you won't be able to fit the distribution set parts on the disks.) If you're using floppies that are formatted for DOS by their manufactur- ers, they probably aren't bootable, and you can use them out of the box. Place all of the "set_name.xx" files on the DOS disks. Once you have the files on DOS disks, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading. ++oo To install or upgrade NetBSD using a tape, you need to do the follow- ing: To install NetBSD from a tape, you need to make a tape that contains the distribution set files, in "tar" format. If you're making the tape on a UN*X-like system, the easiest way to do so is probably something like: tar cf _t_a_p_e___d_e_v_i_c_e _d_i_s_t___d_i_r_e_c_t_o_r_i_e_s where _t_a_p_e___d_e_v_i_c_e is the name of the tape device that describes the tape drive you're using (possibly _/_d_e_v_/_r_s_t_0, or something similar, but it will vary from system to system. (If you can't figure it out, ask your system administrator.) In the above example, _d_i_s_t___d_i_r_e_c_t_o_r_i_e_s are the dis- tribution sets' directories, for the distribution sets you wish to place on the tape. For instance, to put the mmiisscc,, bbaassee,, and eettcc dis- tributions on tape (in order to do the absolute minimum installation to a new disk), you would do the following: ccdd ......//NNeettBBSSDD--11..44..22 ## tthhee ttoopp ooff tthhee ttrreeee ccdd aarrmm3322//bbiinnaarryy And then: tar cf _t_a_p_e___d_e_v_i_c_e mmiisscc eettcc kkeerrnn _N_o_t_e You still need to fill in _t_a_p_e___d_e_v_i_c_e in the example. Once you have the files on the tape, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the sec- tion on upgrading. ++oo To install or upgrade NetBSD using a remote partition, mounted via NFS, you must do the following: _N_o_t_e This method of installation is recommended only for those al- ready familiar with using BSD network configuration and man- agement commands. If you aren't, this documentation should help, but is not intended to be all-encompassing. Place the NetBSD distribution sets you wish to install into a direc- tory on an NFS server, and make that directory mountable by the ma- chine on which you are installing or upgrading NetBSD. This will probably require modifying the /etc/exports file on of the NFS server and resetting its mount daemon (mountd). (Both of these actions will probably require superuser privileges on the server.) You need to know the the numeric IP address of the NFS server, and, if the server is not on a network directly connected to the machine on which you're installing or upgrading NetBSD, you need to know the numeric IP address of the router closest to the NetBSD machine. Fi- nally, you need to know the numeric IP address of the NetBSD machine itself. Once the NFS server is set up properly and you have the information mentioned above, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading. ++oo To install or upgrade NetBSD by using FTP to get the installation sets, you must do the following: _N_o_t_e This method of installation is recommended only for those al- ready familiar with using BSD network configuration and man- agement commands. If you aren't, this documentation should help, but is not intended to be all-encompassing. The preparations for this installation/upgrade method are easy; all you make sure that there's some FTP site from which you can retrieve the NetBSD distribution when you're about to install or upgrade. You need to know the numeric IP address of that site, and, if it's not on a network directly connected to the machine on which you're in- stalling or upgrading NetBSD, you need to know the numeric IP address of the router closest to the NetBSD machine. Finally, you need to know the numeric IP address of the NetBSD machine itself. Once you have this information, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the sec- tion on upgrading. ++oo If you are upgrading NetBSD, you also have the option of installing NetBSD by putting the new distribution sets somewhere in your exist- ing file system, and using them from there. To do that, you must do the following: Place the distribution sets you wish to upgrade somewhere in your current file system tree. Please note that the /dev on the floppy used for upgrades only knows about wd0, wd1, sd0, sd1 and sd2. If you have more than two IDE drives or more than three SCSI drives, you should take care not to place the sets on the high numbered drives. At a bare minimum, you must upgrade the "base" binary distribution, and so must put the "base" set somewhere in your file system. If you wish, you can do the other sets, as well, but you should NOT upgrade the "etc" distribution; the "etc" distribution contains system con- figuration files that you should review and update by hand. Once you have done this, you can proceed to the next step in the up- grade process, actually upgrading your system. PPrreeppaarriinngg yyoouurr SSyysstteemm ffoorr NNeettBBSSDD IInnssttaallllaattiioonn First and foremost, before beginning the installation process, _m_a_k_e _s_u_r_e _y_o_u _h_a_v_e _a _r_e_l_i_a_b_l_e _b_a_c_k_u_p of any data on your hard disk that you wish to keep. Repartitioning your hard disk is an excellent way to destroy impor- tant data. Second, read and perform the instructions in _a_r_m_3_2_/_p_l_a_t_f_o_r_m_/_p_r_e_p that are specific to your platform for partitioning and booting (even if you're dedicating a device to NetBSD). Finally, when you are happy with your NetBSD installation, do whatever is necessary to restore order to the partition you took space away from. This will most likely involve restoring files, but might involve some other ``house-work''. Your hard disk is now prepared to have NetBSD installed on it, and you should proceed with the installation instructions. IInnssttaalllliinngg tthhee NNeettBBSSDD SSyysstteemm Installing NetBSD is a relatively complex process, but if you have this document in hand and are careful to read and remember the information which is presented to you by the install program, it shouldn't be too much trouble. Before you begin, you should know the geometry of your hard disk, i.e. the sector size (note that sector sizes other than 512 bytes are not cur- rently supported), the number of sectors per track, the number of tracks per cylinder (also known as the number of heads), and the number of cylinders on the disk. The NetBSD kernel will try to discover these pa- rameters on its own, and if it can it will print them at boot time. If possible, you should use the parameters it prints. (You might not be able to because you're sharing your disk with another operating system, or because your disk is old enough that the kernel can't figure out its geometry.) If NetBSD will be sharing the disk with RiscOS or another operating sys- tem, you should have already completed the section of these notes that instructed you on how to prepare your hard disk. You should know the size of the NetBSD area of the disk and its offset from the beginning of the disk. You will need this information when setting up your NetBSD parti- tions. You should now be ready to install NetBSD. It might be handy for you to have a pencil, some paper, and a calculator handy. The following is a walk-through of the steps you will take while getting NetBSD installed on your hard disk. If any question has a default answer, it will be displayed in brackets ("[]") after the question. If you wish to stop the installation, you may hit Control-C at any time, but if you do, you'll have to begin the installation process again from scratch. Boot your machine using the installation kernel for your platform. (In- structions for doing this on your platform can be found in the prepara- tion section of this document.) If this doesn't work, ensure that you're using the correct kernel for your hardware. Depending upon your platform and the method of loading the, it may take a while to load the kernel. You will then be presented with the NetBSD kernel boot messages. You will want to read them, to determine your disk's name and geometry. Its name will be something like "sd0" or "wd0" and the geometry will be printed on a line that begins with its name. As mentioned above, you will need your disk's geometry when creating NetBSD's partitions. You will also need to know the name, to tell the install tools what disk to install on. While booting, you will probably see several warnings. You should be warned that no swap space is present, and that init(8) cannot find _/_e_t_c_/_r_c_. Do not be alarmed, these are completely normal. When you reach the prompt asking you for a shell name, just hit return. You will be asked if you wish to install or upgrade your system or go to a shell prompt. Enter iinnssttaallll. You will be presented with a welcome message and a prompt, asking if you wish to proceed with the installation process. If you wish to proceed, enter yy and hit return. You will be asked what type of disk driver you have. The valid options are listed by the install program, to make sure you get it right. The install program will then tell you which disks of that type it can install on, and ask you which it should use. Reply with the name of your disk. (The first disk of the type you selected, either "wd0" for IDE disks, or "sd0" for SCSI disks, is the default.) You will then be asked to name your disk's disklabel. The default re- sponse is "mywd" or "mysd" depending on the type of your disk, and for most purposes it will be OK. If you choose to name it something differ- ent, make sure the name is a single word and contains no special charac- ters. You don't need to remember this name. You will be prompted for your disk's geometry information, i.e. the num- ber of bytes per sector, cylinders on the disk, tracks per cylinder (heads), and sectors per track. Enter them when they are requested. If you make a mistake, hit Control-C and when you get to the shell prompt, restart the install process by running the iinnssttaallll command. Once you have entered this data, the install program will tell you the total size of your disk, in both sectors, and cylinders. Remember this number; if you're installing on the whole disk, you'll need it again soon. When describing your partitions, you will have the option of entering da- ta about them in units of disk sectors or cylinders. If you choose to en- ter the information in units of sectors, remember that, for optimal per- formance, partitions should begin and end on cylinder boundaries. You will be asked about which units you wish to use, and you should reply with "c" for cylinders, or "s" for sectors. You will be asked for the size of the NetBSD portion of the disk. If you're installing on the whole disk, reply with the size of the disk, as printed earlier by the install program. If you're using only part of the disk, reply with the size that you specified in the partition editor. (Don't forget to enter the size in the units you specified in the last step!) If you are not installing on the whole disk, you will be asked for the offset of the NetBSD partition from the beginning of the disk. Reply with the appropriate offset (again, in whichever units you specified), as de- termined by how you set up your disk using the partition editor. You will be asked to enter the size of your NetBSD root partition. It should be at least 13M, but if you are going to be doing development, 14-16M is a more desirable size. This size should be expressed in units of sectors or cylinders, depending on which you said you wanted to use. Next, you will be asked for the size of your swap partition. You should probably allocate twice as much swap space as you have real memory. Sys- tems that will be heavily used should have more swap space allocated, and systems that will be lightly used can get by with less. If you want the system to be able to save crash dumps when it panics, you will need at least as much swap space as you have RAM. Again, this number should be expressed in units of sectors or cylinders, as appropriate. The install program will then ask you for information about the rest of the partitions you want on your disk. For most purposes, you will want only one more partition, _/_u_s_r. (Machines used as servers will probably also want _/_v_a_r as a separate partition. That can be done with these in- stallation tools, but is not covered here.) The install program will tell you how much space there is left to be allocated in the NetBSD area of the disk, and, if you only want one more partition (_/_u_s_r), you should en- ter it at the prompt when the installer asks you how large the next par- tition should be. It will then ask you for the name of the mount point for that partition. If you're doing a basic installation, that is _/_u_s_r. _Y_o_u _a_r_e _n_o_w _a_t _t_h_e _p_o_i_n_t _o_f _n_o _r_e_t_u_r_n_. Nothing has been written to your disk yet, but if you confirm that you want to install NetBSD, your hard drive will be modified, and its contents may be scrambled at the whim of the install program. This is especially likely if you have given the in- stall program incorrect information. If you are sure you want to proceed, enter yyeess at the prompt. The install program will now label your disk and make the file systems you specified. The filesystems will be initialized to contain NetBSD bootstrapping binaries and configuration files. It will also create an _/_e_t_c_/_f_s_t_a_b for your system, and mount all of the file systems under _/_m_n_t_. _n_o _(_I_n _o_t_h_e_r _w_o_r_d_s_, _y_o_u_r _r_o_o_t partition will be mounted on _/_m_n_t_, your _/_u_s_r partition on _/_m_n_t_/_u_s_r, and so on.) There should be no errors in this section of the installation. If there are, restart from the beginning of the installation process. You will be placed at a shell prompt ("#"). The task is to install the distribution sets. The flow of installation differs depending on your hardware resources, and on what media the distribution sets reside. _T_o _i_n_s_t_a_l_l _f_r_o_m _f_l_o_p_p_y The first thing you should do is pick a temporary directory where the distribution files can be stored. To do this, enter the command "Set_tmp_dir", and enter the name of the temporary directory. (Don't for- get that if your disk is still mounted under _/_m_n_t; you should probably pick a directory under _/_m_n_t_/_u_s_r.) After you have picked a temporary directory, enter the "Load_fd" command, to load the distribution sets from your floppies. You will be asked which floppy drive to use. Enter "0" (zero) if you're using the first floppy drive, or enter "1" if you're using the second. You will be prompted to insert a floppy into the drive, to have its con- tents copied to your hard disk. Do so, and hit return to begin copying. When that is done, read the remainder of the floppies that contain the distribution sets that you want to install, one by one. When the last is read, and you are being prompted for another, hit Control-C. Run the EExxttrraacctt command once for each distribution set you wish to in- stall. For instance, if you wish to install the "base13" distribution set, followed by the "text13" distribution set, and finally the "etc13" distribution set, use the commands: Extract base13 Extract text13 Extract etc13 For each extraction, it will ask you if the extraction should be verbose. If you reply affirmatively, it will print out the name of each file that's being extracted. Note: If you know that you will be running low on disk space when in- stalling NetBSD, you can load and extract one distribution set at a time. To do this, load only the floppies which contain the files for the first distribution set, extract them, and then change to the temporary directory and remove them with the com- mand rrmm sseett__nnaammee..???? Once you are finished extracting all of the sets that you wish to in- stall, you should proceed to the instructions below (after the last in- stall medium type-specific instructions), that explain how you should configure your system. _T_o _i_n_s_t_a_l_l _f_r_o_m _t_a_p_e The first thing you should do is pick a temporary directory where the distribution files can be stored. To do this, enter the command "Set_tmp_dir", and enter the name of the temporary directory. (Don't for- get that your disk is mounted under _/_m_n_t; you should probably pick a di- rectory under _/_m_n_t_/_u_s_r.) The default is _/_m_n_t_/_u_s_r_/_d_i_s_t_r_i_b. After you have picked a temporary directory, enter the "Load_tape" com- mand, to load the distribution sets from tape. You will be asked which tape drive to use. The default is "rst0", which is correct if you're using the SCSI tape drive with the lowest SCSI ID number. (For the SCSI tape drive with the next lowest SCSI ID number, you should use "rst1", and so on.) You will be prompted to hit return when you have inserted the tape into the tape drive. When you do, the contents of the tape will be extracted into the temporary directory, and the names of the files being extracted will be printed. After the tape has been extracted, to go the directory containing the first distribution set you wish to install. (Depending on how you made the tape, it's probably a subdirectory of the temporary directory you specified above.) Once there, run the "Set_tmp_dir" command again, and accept its default answer by hitting return at the prompt. Use the "Extract" command to extract the distribution set. For instance, if you're extracting the "base13" set, use the command: Extract base13 You will be asked if you wish the extraction to be verbose. If you reply affirmatively, the name of each file being extracted will be printed. Repeat the previous two steps for each distribution set you wish to in- stall. Change to the set's directory, run SSeett__ttmmpp__ddiirr, and then run EExxttrraacctt _s_e_t___n_a_m_e to extract the set. Once you are finished extracting all of the sets that you wish to in- stall, you should proceed to the instructions below (after the last in- stall medium type-specific instructions), that explain how you should configure your system. _T_o _i_n_s_t_a_l_l _v_i_a _F_T_P _o_r _N_F_S The first thing you should do is pick a temporary directory where the distribution files can be stored. To do this, enter the command "Set_tmp_dir", and enter the name of the temporary directory. (Don't for- get that your disk is mounted under _/_m_n_t; you should probably pick a di- rectory under _/_m_n_t_/_u_s_r.) The default is /mnt/usr/distrib. Configure the appropriate ethernet interface (e.g. ea0, eb0, etc.) up, with a command like: iiffccoonnffiigg _i_f_n_a_m_e _i_p_a_d_d_r [nneettmmaasskk _n_e_t_m_a_s_k] where _i_f_n_a_m_e is the interface name, like those listed above, and _i_p_a_d_d_r is the numeric IP address of the interface. If the interface has a spe- cial netmask, supply the word nneettmmaasskk and that netmask at the end of the command line. (The brackets indicate that those arguments are optional.) For instance, to configure interface ea0 with IP address 129.133.10.10, use the command: ifconfig ea0 129.133.10.10 and to configure interface eb0 with IP address 128.32.240.167 and a spe- cial netmask, 0xffffff00, use the command: ifconfig eb0 128.32.240.167 netmask 0xffffff00 If the NFS server or FTP server is not on a directly- connected network, you need to set up a route to it using a command like: rroouuttee aadddd ddeeffaauulltt _g_a_t_e___i_p_a_d_d_r where _g_a_t_e___i_p_a_d_d_r is your gateway's numeric IP address. If you are NFS-mounting the distribution sets, mount them on the tempo- rary directory with a command like: mmoouunntt --tt nnffss _s_e_r_v___i_p_a_d_d_r_:_d_i_s_t___d_i_r _t_m_p___d_i_r where _s_e_r_v___i_p_a_d_d_r is the server's numeric IP address, _d_i_s_t___d_i_r is the path to the distribution files on the server, and _t_m_p___d_i_r is the name of the local temporary directory. Once this is done, proceed as if you had loaded the files from tape, changing to the appropriate directories, running "Set_tmp_dir", and run- ning "Extract" as appropriate. If you are retrieving the distribution sets using ftp, change into the temporary directory, and execute the command: ffttpp _s_e_r_v___i_p_a_d_d_r where _s_e_r_v___i_p_a_d_d_r is once again the server's numeric IP address. Get the files with FTP, taking care to use binary mode when transferring the files. Once you have all of the files for the distribution sets that you wish to install, you can proceed using the instructions above, as if you had in- stalled from a floppy. (Note that as with the floppy install, if you're short on disk space, you can transfer only one set at a time, extract it, then delete it, to save space.) _T_o _i_n_s_t_a_l_l _f_r_o_m _C_D_R_O_M_: First create a mount point so that you can mount the CDROM: mkdir /mnt/cdrom If you get an error here of "mkdir: /mnt/cdrom", don't worry it just means that you didn't need to create the directory. Then all you need to do is mount the CDROM. For the first CDROM drive use: mount -rt cd9660 /dev/cd0a /mnt/cdrom Or, for the second use: mount -rt cd9660 /dev/cd1a /mnt/cdrom Once this is done, extract the required sets as described in the "To in- stall from floppy" section, but ensure that you set the temporary direc- tory to the location of the sets on the CDROM (usually _/_c_d_r_o_m_/_d_i_s_t_r_i_b, but check the release notes that came with the CD). _C_o_m_p_l_e_t_i_n_g _y_o_u_r _i_n_s_t_a_l_l_a_t_i_o_n Once you have finished extracting all of the distribution sets that you wish to install, and are back at the "#" prompt, you are ready to config- ure your system. The configuration utility expects that you have in- stalled the "base13" and "etc13" distribution sets. If you have not, you will not be able to run it successfully (nor will you have a functional system, in any case). To configure your newly-installed NetBSD system, run the command "Configure". It will ask you for the system's host name, domain name, and other network configuration information. It will set up your configuration files and make the device nodes for the newly-in- stalled system. _C_o_n_g_r_a_t_u_l_a_t_i_o_n_s_, _y_o_u _h_a_v_e _s_u_c_c_e_s_s_f_u_l_l_y _i_n_s_t_a_l_l_e_d NetBSD 1.4.2. PPoosstt iinnssttaallllaattiioonn sstteeppss Once you've got the operating system running, there are a few things you need to do in order to bring the system into a propperly configured state, with the most important ones described below. 1. Configuring _/_e_t_c_/_r_c_._c_o_n_f If you haven't done any configuration of _/_e_t_c_/_r_c_._c_o_n_f, the system will drop you into single user mode on first reboot with the message /etc/rc.conf is not configured. Multiuser boot aborted. and with the root filesystem mounted read-write. When the system asks you to choose a shell, simply hit return to get to a prompt. If you are asked for a terminal type, respond with vvtt222200 (or whatever is appropriate for your terminal type) and hit return. At this point, you need to configure at least one file in the _/_e_t_c directory. Change to the _/_e_t_c directory and take a look at the _/_e_t_c_/_r_c_._c_o_n_f file. Modify it to your tastes, making sure that you set rc_configured=YES so that your changes will be enabled and a multi-user boot can proceed. If your _/_u_s_r directory is on a separate partition and you do not know how to use 'ed' or 'ex', you will have to mount your _/_u_s_r partition to gain access to 'vi'. Do the follow- ing: mmoouunntt //uussrr eexxppoorrtt TTEERRMM==vvtt222200 If you have _/_v_a_r on a seperate partition, you need to repeat that step for it. After that, you can edit _/_e_t_c_/_r_c_._c_o_n_f with vi(1). When you have finished, type eexxiitt at the prompt to leave the single-user shell and continue with the multi-user boot. Other values that need to be set in _/_e_t_c_/_r_c_._c_o_n_f for a networked en- vironment are _h_o_s_t_n_a_m_e and possibly _d_e_f_a_u_l_t_r_o_u_t_e, furthermore add an _i_f_c_o_n_f_i_g___i_n_t for your interface , along the lines of ifconfig_de0="inet 123.45.67.89 netmask 255.255.255.0" or, if you have _m_y_n_a_m_e_._m_y_._d_o_m in _/_e_t_c_/_h_o_s_t_s: ifconfig_de0="inet myname.my.dom netmask 255.255.255.0" To enable proper hostname resolution, you will also want to add an _/_e_t_c_/_r_e_s_o_l_v_._c_o_n_f file or (if you are feeling a little more adventur- ous) run named(8). See resolv.conf(5) or named(8) for more informa- tion. Other files in _/_e_t_c that are new to NetBSD 1.4 and may require modi- fication or setting up include _/_e_t_c_/_m_a_i_l_e_r_._c_o_n_f, _/_e_t_c_/_n_s_s_w_i_t_c_h_._c_o_n_f and _/_e_t_c_/_w_s_c_o_n_s_._c_o_n_f. 2. Logging in After reboot, you can log in as root at the login prompt. There is no initial password, but if you're using the machine in a networked environment, you should create an account for yourself (see below) and protect it and the "root" account with good passwords. 3. Adding accounts Use the vipw(8) command to add accounts to your system, _d_o _n_o_t edit _/_e_t_c_/_p_a_s_s_w_d directly. See adduser(8) for more information on the process of how to add a new user to the system. 4. The X Window System If you have installed the X window system, look at the files in _/_u_s_r_/_X_1_1_R_6_/_l_i_b_/_X_1_1_/_d_o_c for information. You will need to set up a configuration file, see _/_u_s_r_/_X_1_1_R_6_/_l_i_b_/_X_1_1_/_X_F_8_6_C_o_n_f_i_g_._e_g for an example. See hhttttpp::////wwwwww..xxffrreeee8866..oorrgg// and the XFree86 manual page for more infor- mation. Don't forget to add _/_u_s_r_/_X_1_1_R_6_/_b_i_n to your path in your shell's dot file so that you have access to the X binaries. 5. Installing 3rd party packages There is a lot of software freely available for Unix-based systems, almost all of which can run on NetBSD. Modifications are usually needed to when transferring programs between different Unix-like systems, so the NetBSD packages collection incorporates any such changes necessary to make that software run on NetBSD, and makes the installation (and deinstallation) of the software packages easy. There's also the option of building a package from source, in case there's no precompiled binary available. Precompiled binaries can be found at ffttpp::////ffttpp..nneettbbssdd..oorrgg//ppuubb//NNeettBBSSDD//ppaacckkaaggeess// Package sources for compiling packages can be obtained by retrieving the file ffttpp::////ffttpp..nneettbbssdd..oorrgg//ppuubb//NNeettBBSSDD//NNeettBBSSDD-- ccuurrrreenntt//ttaarr__ffiilleess//ppkkggssrrcc..ttaarr..ggzz and extracting it into _/_u_s_r_/_p_k_g_s_r_c. See _/_u_s_r_/_p_k_g_s_r_c_/_R_E_A_D_M_E then for more information. 6. Misc ++oo To adjust the system to your local timezone, point the _/_e_t_c_/_l_o_c_a_l_t_i_m_e symlink to the appropriate file under _/_u_s_r_/_s_h_a_r_e_/_z_o_n_e_i_n_f_o. ++oo Edit _/_e_t_c_/_a_l_i_a_s_e_s to forward root mail to the right place (run newaliases(1) afterwards.) ++oo The _/_e_t_c_/_s_e_n_d_m_a_i_l_._c_f file will almost definitely need to be ad- justed; files aiding in this can be found in _/_u_s_r_/_s_h_a_r_e_/_s_e_n_d_m_a_i_l. See the README file there for more infor- mation. ++oo Edit _/_e_t_c_/_r_c_._l_o_c_a_l to run any local daemons you use. ++oo Many of the _/_e_t_c files are documented in section 5 of the manu- al; so just invoking mmaann _f_i_l_e_n_a_m_e is likely to give you more information on these files. UUppggrraaddiinngg aa pprreevviioouussllyy--iinnssttaalllleedd NNeettBBSSDD SSyysstteemm Upgrading from a previous version of NetBSD isn't currently supported by NetBSD/arm32. If you are currently running NetBSD/arm32 then make a FULL BACKUP of your current installation, and install NetBSD 1.4.2 from scratch. Obviously some of the steps can be skipped (in particular, hard disk partitioning) as they will already be done. CCoommppaattiibbiilliittyy IIssssuueess WWiitthh PPrreevviioouuss NNeettBBSSDD RReelleeaasseess Users upgrading from previous versions of NetBSD may wish to bear the following problems and compatibility issues in mind when upgrading to NetBSD 1.4.2 _N_o_t_e Only issues effecting an upgrade from NetBSD 1.3 or NetBSD 1.3.x are decribed here. ++oo "machine" directory/link in "/usr/include" Description Some architecture may fail to install the ccoommpp set because the /usr/include/machine directory changed to a symbolic link in NetBSD 1.4. Fix If this happens, you can use the command # rrmm --rr //uussrr//iinncclluuddee//mmaacchhiinnee to remove the old directory and it contents and reinstall the ccoommpp set. UUssiinngg oonnlliinnee NNeettBBSSDD ddooccuummeennttaattiioonn Documentation is available if you first install the manual distribution set. Traditionally, the ``man pages'' (documentation) are denoted by ``name(section)''. Some examples of this are ++oo intro(1), ++oo man(1), ++oo apropros(1), ++oo passwd(1), and ++oo passwd(5). The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8. The _m_a_n command is used to view the documentation on a topic, and is started by entering mmaann [_s_e_c_t_i_o_n] _t_o_p_i_c. The brackets [] around the sec- tion should not be entered, but rather indicate that the section is op- tional. If you don't ask for a particular section, the topic with the lowest numbered section name will be displayed. For instance, after log- ging in, enter mmaann ppaasssswwdd to read the documentation for passwd(1). To view the documentation for passwd(5)m enter mmaann 55 ppaasssswwdd instead. If you are unsure of what man page you are looking for, enter aapprrooppooss _s_u_b_j_e_c_t_-_w_o_r_d where _s_u_b_j_e_c_t_-_w_o_r_d is your topic of interest; a list of possibly related man pages will be displayed. AAddmmiinniissttrriivviiaa If you've got something to say, do so! We'd like your input. There are various mailing lists available via the mailing list server at _m_a_j_o_r_d_o_m_o_@_N_e_t_B_S_D_._O_R_G. To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instruc- tions. There are various mailing lists set up to deal with comments and ques- tions about this release. Please send comments to: _n_e_t_b_s_d_- _c_o_m_m_e_n_t_s_@_N_e_t_B_S_D_._O_R_G. To report bugs, use the send-pr(1) command shipped with NetBSD, and fill in as much information about the problem as you can. Good bug reports in- clude lots of details. Additionally, bug reports can be sent by mail to: _n_e_t_b_s_d_-_b_u_g_s_@_N_e_t_B_S_D_._O_R_G. Use of send-pr(1) is encouraged, however, because bugs reported with it are entered into the NetBSD bugs database, and thus can't slip through the cracks. There are also port-specific mailing lists, to discuss aspects of each port of NetBSD. Use majordomo to find their addresses. If you're inter- ested in doing a serious amount of work on a specific port, you probably should contact the "owner" of that port (listed below). If you'd like to help with this effort, and have an idea as to how you could be useful, send us mail or subscribe to: _n_e_t_b_s_d_-_h_e_l_p_@_N_e_t_B_S_D_._O_R_G. As a favor, please avoid mailing huge documents or files to these mailing lists. Instead, put the material you would have sent up for FTP some- where, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it. TThhaannkkss ggoo ttoo ++oo The former members of UCB's Computer Systems Research Group, includ- ing (but not limited to): Keith Bostic Ralph Campbell Mike Karels Marshall Kirk McKusick for their ongoing work on BSD systems, support, and encouragement. ++oo Also, our thanks go to: Mike Hibler Rick Macklem Jan-Simon Pendry Chris Torek for answering lots of questions, fixing bugs, and doing the various work they've done. ++oo UC Berkeley's Experimental Computing Facility provided a home for sun-lamp in the past, people to look after it, and a sense of humor. Rob Robertson, too, has added his unique sense of humor to things, and for a long time provided the primary FTP site for NetBSD. ++oo Vixie Enterprises for hosting the NetBSD FTP, WWW and SUP server. ++oo Redback Networks, Inc. for hosting the NetBSD Mail server. ++oo Without CVS, this project would be impossible to manage, so our hats go off to Brian Berliner, Jeff Polk, and the various other people who've had a hand in making CVS a useful tool. ++oo Dave Burgess _b_u_r_g_e_s_s_@_c_y_n_j_u_t_._i_n_f_o_n_e_t_._n_e_t has been maintaining the 386BSD/NetBSD/FreeBSD FAQ for quite some time, and deserves to be recognized for it. ++oo The following individuals and organiztions (each in alphabetical or- der) have made donations or loans of hardware and/or money, to sup- port NetBSD development, and deserve credit for it: Steve Allen Jason Birnschein Mason Loring Bliss Jason Brazile Mark Brinicombe David Brownlee Simon Burge Dave Burgess Ralph Campbell Brian Carlstrom James Chacon Bill Coldwell Charles Conn Tom Coulter Charles D. Cranor Christopher G. Demetriou Scott Ellis Hubert Feyrer Castor Fu Greg Gingerich William Gnadt Michael Graff Guenther Grau Ross Harvey Charles M. Hannum Michael L. Hitch Kenneth Alan Hornstein Jordan K. Hubbard Soren Jorvang Scott Kaplan Noah M. Keiserman John Kohl Chris Legrow Ted Lemon Neil J. McRae Perry E. Metzger Herb Peyerl Mike Price Dave Rand Michael Richardson Heiko W. Rupp Brad Salai Chuck Silvers Thor Lancelot Simon Bill Sommerfeld Paul Southworth Ted Spradley Kimmo Suominen Jason R. Thorpe Steve Wadlow Krister Walfridsson Jim Wise Christos Zoulas AboveNet Communications, Inc. Advanced System Products, Inc. Avalon Computer Systems Bay Area Internet Solutions Brains Corporation, Japan Canada Connect Corporation Co-operative Research Centre for Enterprise Distributed Systems Technology Demon Internet, UK Digital Equipment Corporation Easynet, UK Free Hardware Foundation Innovation Development Enterprises of America Internet Software Consortium MS Macro System GmbH, Germany Numerical Aerospace Simulation Facility, NASA Ames Research Center Piermont Information Systems Inc. VMC Harald Frank, Germany Warped Communications, Inc. (If you're not on that list and should be, tell us! We probably were not able to get in touch with you, to verify that you wanted to be listed.) ++oo Finally, we thank all of the people who've put sweat and tears into developing NetBSD since its inception in January, 1993. (Obviously, there are a lot more people who deserve thanks here. If you're one of them, and would like to mentioned, tell us!) WWee aarree...... (in alphabetical order) _T_h_e _N_e_t_B_S_D _c_o_r_e _g_r_o_u_p_: Alistair Crooks _a_g_c_@_N_e_t_B_S_D_._O_R_G Jun-ichiro itojun Hagino _i_t_o_j_u_n_@_N_e_t_B_S_D_._O_R_G Frank van der Linden _f_v_d_l_@_N_e_t_B_S_D_._O_R_G Luke Mewburn _l_u_k_e_m_@_N_e_t_B_S_D_._O_R_G Christos Zoulas _c_h_r_i_s_t_o_s_@_N_e_t_B_S_D_._O_R_G _T_h_e _p_o_r_t_m_a_s_t_e_r_s _(_a_n_d _t_h_e_i_r _p_o_r_t_s_)_: Mark Brinicombe _m_a_r_k_@_N_e_t_B_S_D_._O_R_G aarrmm3322 Jeremy Cooper _j_e_r_e_m_y_@_N_e_t_B_S_D_._O_R_G ssuunn33xx Ross Harvey _r_o_s_s_@_N_e_t_B_S_D_._O_R_G aallpphhaa Ignatios Souvatzis _i_s_@_N_e_t_B_S_D_._O_R_G aammiiggaa Jun-ichiro itojun Hagino _i_t_o_j_u_n_@_N_e_t_B_S_D_._O_R_G sshh33 Eduardo Horvath _e_e_h_@_N_e_t_B_S_D_._O_R_G ssppaarrcc6644 Paul Kranenburg _p_k_@_N_e_t_B_S_D_._O_R_G ssppaarrcc Anders Magnusson _r_a_g_g_e_@_N_e_t_B_S_D_._O_R_G vvaaxx Tsubai Masanari _t_s_u_b_a_i_@_N_e_t_B_S_D_._O_R_G mmaaccppppcc Tsubai Masanari _t_s_u_b_a_i_@_N_e_t_B_S_D_._O_R_G nneewwssmmiippss Minoura Makoto _m_i_n_o_u_r_a_@_N_e_t_B_S_D_._O_R_G xx6688kk Phil Nelson _p_h_i_l_@_N_e_t_B_S_D_._O_R_G ppcc553322 Scott Reynolds _s_c_o_t_t_r_@_N_e_t_B_S_D_._O_R_G mmaacc6688kk Darrin Jewell _d_b_j_@_N_e_t_B_S_D_._O_R_G nneexxtt6688kk Kazuki Sakamoto _s_a_k_a_m_o_t_o_@_N_e_t_B_S_D_._O_R_G bbeebbooxx Wolfgang Solfrank _w_s_@_N_e_t_B_S_D_._O_R_G ooffppppcc Jonathan Stone _j_o_n_a_t_h_a_n_@_N_e_t_B_S_D_._O_R_G ppmmaaxx Shin Takemura _t_a_k_e_m_u_r_a_@_N_e_t_B_S_D_._O_R_G hhppccmmiippss Jason Thorpe _t_h_o_r_p_e_j_@_N_e_t_B_S_D_._O_R_G hhpp330000 Frank van der Linden _f_v_d_l_@_N_e_t_B_S_D_._O_R_G ii338866 Leo Weppelman _l_e_o_@_N_e_t_B_S_D_._O_R_G aattaarrii Nathan Williams _n_a_t_h_a_n_w_@_N_e_t_B_S_D_._O_R_G ssuunn33 Steve Woodford _s_c_w_@_N_e_t_B_S_D_._O_R_G mmvvmmee6688kk _T_h_e _N_e_t_B_S_D _1_._4_._2 _R_e_l_e_a_s_e _E_n_g_i_n_e_e_r_i_n_g _t_e_a_m_: Chris G. Demetriou _c_g_d_@_N_e_t_B_S_D_._O_R_G Havard Eidnes _h_e_@_N_e_t_B_S_D_._O_R_G Ted Lemon _m_e_l_l_o_n_@_N_e_t_B_S_D_._O_R_G Perry Metzger _p_e_r_r_y_@_N_e_t_B_S_D_._O_R_G Curt Sampson _c_j_s_@_N_e_t_B_S_D_._O_R_G _D_e_v_e_l_o_p_e_r_s _a_n_d _o_t_h_e_r _c_o_n_t_r_i_b_u_t_o_r_s_: Steve Allen _w_o_r_m_e_y_@_N_e_t_B_S_D_._O_R_G Julian Assange _p_r_o_f_f_@_N_e_t_B_S_D_._O_R_G Lennart Augustsson _a_u_g_u_s_t_s_s_@_N_e_t_B_S_D_._O_R_G Christoph Badura _b_a_d_@_N_e_t_B_S_D_._O_R_G Robert V. Baron _r_v_b_@_N_e_t_B_S_D_._O_R_G Erik Berls _c_y_b_e_r_@_N_e_t_B_S_D_._O_R_G John Birrell _j_b_@_N_e_t_B_S_D_._O_R_G Mason Loring Bliss _m_a_s_o_n_@_N_e_t_B_S_D_._O_R_G Manuel Bouyer _b_o_u_y_e_r_@_N_e_t_B_S_D_._O_R_G John Brezak _b_r_e_z_a_k_@_N_e_t_B_S_D_._O_R_G Allen Briggs _b_r_i_g_g_s_@_N_e_t_B_S_D_._O_R_G Aaron Brown _a_b_r_o_w_n_@_N_e_t_B_S_D_._O_R_G David Brownlee _a_b_s_@_N_e_t_B_S_D_._O_R_G Frederick Bruckman _f_r_e_d_b_@_N_e_t_B_S_D_._O_R_G Jon Buller _j_o_n_b_@_N_e_t_B_S_D_._O_R_G Simon Burge _s_i_m_o_n_b_@_N_e_t_B_S_D_._O_R_G Dave Burgess _b_u_r_g_e_s_s_@_c_y_n_j_u_t_._i_n_f_o_n_e_t_._n_e_t Robert Byrnes _b_y_r_n_e_s_@_N_e_t_B_S_D_._o_r_g D'Arcy J.M. Cain _d_a_r_c_y_@_N_e_t_B_S_D_._O_R_G Dave Carrel _c_a_r_r_e_l_@_N_e_t_B_S_D_._O_R_G Bill Coldwell _b_i_l_l_c_@_N_e_t_B_S_D_._O_R_G Julian Coleman _j_d_c_@_N_e_t_B_S_D_._O_R_G Chuck Cranor _c_h_u_c_k_@_N_e_t_B_S_D_._O_R_G Aidan Cully _a_i_d_a_n_@_N_e_t_B_S_D_._O_R_G Johan Danielsson _j_o_d_a_@_N_e_t_B_S_D_._O_R_G Matt DeBergalis _d_e_b_e_r_g_@_N_e_t_B_S_D_._O_R_G Rob Deker _d_e_k_e_r_@_N_e_t_B_S_D_._O_R_G Chris G. Demetriou _c_g_d_@_N_e_t_B_S_D_._O_R_G Jaromir Dolecek _j_d_o_l_e_c_e_k_@_N_e_t_B_S_D_._O_R_G Andy Doran _a_d_@_N_e_t_B_S_D_._O_R_G Roland Dowdeswell _e_l_r_i_c_@_N_e_t_B_S_D_._O_R_G Matthias Drochner _d_r_o_c_h_n_e_r_@_N_e_t_B_S_D_._O_R_G Jun Ebihara _j_u_n_@_N_e_t_B_S_D_._O_R_G Havard Eidnes _h_e_@_N_e_t_B_S_D_._O_R_G Enami Tsugutomo _e_n_a_m_i_@_N_e_t_B_S_D_._O_R_G Bernd Ernesti _v_e_e_g_o_@_N_e_t_B_S_D_._O_R_G Erik Fair _f_a_i_r_@_N_e_t_B_S_D_._O_R_G Hubert Feyrer _h_u_b_e_r_t_f_@_N_e_t_B_S_D_._O_R_G Thorsten Frueauf _f_r_u_e_a_u_f_@_N_e_t_B_S_D_._O_R_G Castor Fu _c_a_s_t_o_r_@_N_e_t_B_S_D_._O_R_G Brian R. Gaeke _b_r_g_@_d_g_a_t_e_._o_r_g Thomas Gerner _t_h_o_m_a_s_@_N_e_t_B_S_D_._O_R_G Simon J. Gerraty _s_j_g_@_N_e_t_B_S_D_._O_R_G Justin Gibbs _g_i_b_b_s_@_N_e_t_B_S_D_._O_R_G Adam Glass _g_l_a_s_s_@_N_e_t_B_S_D_._O_R_G Michael Graff _e_x_p_l_o_r_e_r_@_N_e_t_B_S_D_._O_R_G Brian C. Grayson _b_g_r_a_y_s_o_n_@_N_e_t_B_S_D_._O_R_G Brad Grantham _g_r_a_n_t_h_a_m_@_t_e_n_o_n_._c_o_m Matthew Green _m_r_g_@_N_e_t_B_S_D_._O_R_G Juergen Hannken-Illjes _h_a_n_n_k_e_n_@_N_e_t_B_S_D_._O_R_G Charles M. Hannum _m_y_c_r_o_f_t_@_N_e_t_B_S_D_._O_R_G Eric Haszlakiewicz _e_r_h_@_N_e_t_B_S_D_._O_R_G HAYAKAWA Koichi _h_a_y_a_@_N_e_t_B_S_D_._O_R_G Rene Hexel _r_h_@_N_e_t_B_S_D_._O_R_G Michael L. Hitch _m_h_i_t_c_h_@_N_e_t_B_S_D_._O_R_G Christian E. Hopps _c_h_o_p_p_s_@_N_e_t_B_S_D_._O_R_G Ken Hornstein _k_e_n_h_@_N_e_t_B_S_D_._O_R_G Marc Horowitz _m_a_r_c_@_N_e_t_B_S_D_._O_R_G Dean Huxley _d_e_a_n_@_n_e_t_b_s_d_._o_r_g ITOH Yasufumi _i_t_o_h_y_@_N_e_t_B_S_D_._O_R_G Matthew Jacob _m_j_a_c_o_b_@_N_e_t_B_S_D_._O_R_G Lonhyn T. Jasinskyj _l_o_n_h_y_n_@_N_e_t_B_S_D_._O_R_G Chris Jones _c_j_o_n_e_s_@_N_e_t_B_S_D_._O_R_G Soren Jorvang _s_o_r_e_n_@_N_e_t_B_S_D_._O_R_G Antti Kantee _p_o_o_k_a_@_N_e_t_B_S_D_._O_R_G Lawrence Kesteloot _k_e_s_t_e_l_o_o_@_c_s_._u_n_c_._e_d_u Thomas Klausner _w_i_z_@_N_e_t_B_S_D_._O_R_G Klaus Klein _k_l_e_i_n_k_@_N_e_t_B_S_D_._O_R_G John Kohl _j_t_k_@_N_e_t_B_S_D_._O_R_G Kevin Lahey _k_m_l_@_N_e_t_B_S_D_._O_R_G Johnny C. Lam _j_l_a_m_@_N_e_t_B_S_D_._O_R_G Martin J. Laubach _m_j_l_@_N_e_t_B_S_D_._O_R_G Ted Lemon _m_e_l_l_o_n_@_N_e_t_B_S_D_._O_R_G Joel Lindholm _j_o_e_l_@_N_e_t_B_S_D_._O_R_G Mike Long _m_i_k_e_l_@_N_e_t_B_S_D_._O_R_G Warner Losh _i_m_p_@_N_e_t_B_S_D_._O_R_G Brett Lymn _b_l_y_m_n_@_N_e_t_B_S_D_._O_R_G Paul Mackerras _p_a_u_l_u_s_@_N_e_t_B_S_D_._O_R_G Dan McMahill _d_m_c_m_a_h_i_l_l_@_N_e_t_B_S_D_._O_R_G Neil J. McRae _n_e_i_l_@_N_e_t_B_S_D_._O_R_G Perry Metzger _p_e_r_r_y_@_N_e_t_B_S_D_._O_R_G der Mouse _m_o_u_s_e_@_N_e_t_B_S_D_._O_R_G Joseph Myers _j_s_m_@_N_e_t_B_S_D_._O_R_G Ken Nakata _k_e_n_n_@_N_e_t_B_S_D_._O_R_G Bob Nestor _r_n_e_s_t_o_r_@_N_e_t_B_S_D_._O_R_G Tohru Nishimura _n_i_s_i_m_u_r_a_@_N_e_t_B_S_D_._O_R_G Masaru Oki _o_k_i_@_N_e_t_B_S_D_._O_R_G Greg Oster _o_s_t_e_r_@_N_e_t_B_S_D_._O_R_G Herb Peyerl _h_p_e_y_e_r_l_@_N_e_t_B_S_D_._O_R_G Matthias Pfaller _m_a_t_t_h_i_a_s_@_N_e_t_B_S_D_._O_R_G Dante Profeta _d_a_n_t_e_@_N_e_t_B_S_D_._O_R_G Chris Provenzano _p_r_o_v_e_n_@_N_e_t_B_S_D_._O_R_G Waldi Ravens _w_a_l_d_i_@_m_o_a_c_s_._i_n_d_i_v_._n_l_._n_e_t Darren Reed _d_a_r_r_e_n_r_@_N_e_t_B_S_D_._O_R_G Michael Richardson _m_c_r_@_N_e_t_B_S_D_._O_R_G Tim Rightnour _g_a_r_b_l_e_d_@_N_e_t_B_S_D_._O_R_G Gordon Ross _g_w_r_@_N_e_t_B_S_D_._O_R_G Heiko W. Rupp _h_w_r_@_N_e_t_B_S_D_._O_R_G SAITOH Masanobu _m_s_a_i_t_o_h_@_N_e_t_B_S_D_._O_R_G Curt Sampson _c_j_s_@_N_e_t_B_S_D_._O_R_G Wilfredo Sanchez _w_s_a_n_c_h_e_z_@_N_e_t_B_S_D_._O_R_G Ty Sarna _t_s_a_r_n_a_@_N_e_t_B_S_D_._O_R_G SATO Kazumi _s_a_t_o_@_N_e_t_B_S_D_._O_R_G Matthias Scheler _t_r_o_n_@_N_e_t_B_S_D_._O_R_G Karl Schilke (rAT) _r_a_t_@_N_e_t_B_S_D_._O_R_G Konrad Schroder _p_e_r_s_e_a_n_t_@_N_e_t_B_S_D_._O_R_G Tim Shepard _s_h_e_p_@_N_e_t_B_S_D_._O_R_G Takao Shinohara _s_h_i_n_@_N_e_t_B_S_D_._O_R_G Chuck Silvers _c_h_s_@_N_e_t_B_S_D_._O_R_G Thor Lancelot Simon _t_l_s_@_N_e_t_B_S_D_._O_R_G Noriyuki Soda _s_o_d_a_@_N_e_t_B_S_D_._O_R_G Bill Sommerfeld _s_o_m_m_e_r_f_e_l_d_@_N_e_t_B_S_D_._O_R_G Bill Studenmund _w_r_s_t_u_d_e_n_@_N_e_t_B_S_D_._O_R_G Kevin Sullivan _s_u_l_l_i_v_a_n_@_N_e_t_B_S_D_._O_R_G Kimmo Suominen _k_i_m_@_N_e_t_B_S_D_._O_R_G Matt Thomas _m_a_t_t_@_N_e_t_B_S_D_._O_R_G Christoph Toshok _t_o_s_h_o_k_@_N_e_t_B_S_D_._O_R_G Izumi Tsutsui _t_s_u_t_s_u_i_@_N_e_t_B_S_D_._O_R_G UCHIYAMA Yasushi _u_c_h_@_N_e_t_B_S_D_._O_R_G Todd Vierling _t_v_@_N_e_t_B_S_D_._O_R_G Aymeric Vincent _a_y_m_e_r_i_c_@_N_e_t_B_S_D_._O_R_G Paul Vixie _v_i_x_i_e_@_N_e_t_B_S_D_._O_R_G Krister Walfridsson _k_r_i_s_t_e_r_w_@_N_e_t_B_S_D_._O_R_G Lex Wennmacher _w_e_n_n_m_a_c_h_@_N_e_t_B_S_D_._O_R_G Assar Westerlund _a_s_s_a_r_@_N_e_t_B_S_D_._O_R_G Rob Windsor _w_i_n_d_s_o_r_@_N_e_t_B_S_D_._O_R_G Dan Winship _d_a_n_w_@_N_e_t_B_S_D_._O_R_G Jim Wise _j_w_i_s_e_@_N_e_t_B_S_D_._O_R_G Colin Wood _e_n_d_e_r_@_N_e_t_B_S_D_._O_R_G LLeeggaall MMuummbboo--JJuummbboo The following notices are required to satisfy the license terms of the software that we have mentioned in this document: This product includes software developed by the University of California, Berkeley and its contributors. This product includes software developed by the Computer Systems Engi- neering Group at Lawrence Berkeley Laboratory. This product includes software developed by the NetBSD Foundation, Inc. and its contributors. This product includes software developed by Adam Glass and Charles Han- num. This product includes software developed by Adam Glass. This product includes software developed by Berkeley Software Design, Inc. This product includes software developed by Charles D. Cranor and Wash- ington University. This product includes software developed by Charles D. Cranor. This product includes software developed by Charles Hannum, by the Uni- versity of Vermont and State Agricultural College and Garrett A. Wollman, by William F. Jolitz, and by the University of California, Berkeley, Lawrence Berkeley Laboratory, and its contributors. This product includes software developed by Charles Hannum. This product includes software developed by Charles M. Hannum. This product includes software developed by Chris Provenzano. This product includes software developed by Christian E. Hopps. This product includes software developed by Christopher G. Demetriou for the NetBSD Project. This product includes software developed by Christopher G. Demetriou. This product includes software developed by Christos Zoulas. This product includes software developed by David Jones and Gordon Ross. This product includes software developed by Dean Huxley. This product includes software developed by Eric S. Hvozda. This product includes software developed by Ezra Story. This product includes software developed by Gordon Ross. This product includes software developed by Gordon W. Ross and Leo Wep- pelman. This product includes software developed by Gordon W. Ross. This product includes software developed by Herb Peyerl. This product includes software developed by Ian W. Dall. This product includes software developed by Ignatios Souvatzis for the NetBSD Project. This product includes software developed by Jason R. Thorpe for And Com- munications, http://www.and.com/. This product includes software developed by Joachim Koenig-Baltes. This product includes software developed by Jochen Pohl for The NetBSD Project. This product includes software developed by John Polstra. This product includes software developed by Jonathan Stone and Jason R. Thorpe for the NetBSD Project. This product includes software developed by Jonathan Stone for the NetBSD Project. This product includes software developed by Jonathan Stone. This product includes software developed by Julian Highfield. This product includes software developed by Kenneth Stailey. This product includes software developed by Leo Weppelman. This product includes software developed by Lloyd Parkes. This product includes software developed by Mark Brinicombe. This product includes software developed by Markus Wild. This product includes software developed by Martin Husemann and Wolfgang Solfrank. This product includes software developed by Mats O Jansson and Charles D. Cranor. This product includes software developed by Mats O Jansson. This product includes software developed by Matthias Pfaller. This product includes software developed by Paul Kranenburg. This product includes software developed by Paul Mackerras. This product includes software developed by Peter Galbavy. This product includes software developed by Philip A. Nelson. This product includes software developed by Rodney W. Grimes. This product includes software developed by Scott Bartram. This product includes software developed by SigmaSoft, Th. Lockert. This product includes software developed by Terrence R. Lambert. This product includes software developed by Theo de Raadt and John Brezak. This product includes software developed by Theo de Raadt. This product includes software developed by TooLs GmbH. This product includes software developed by Winning Strategies, Inc. This product includes software developed by the Center for Software Sci- ence at the University of Utah. This product includes software developed by the University of Calgary De- partment of Computer Science and its contributors. This product includes software developed by the University of Vermont and State Agricultural College and Garrett A. Wollman. This product includes software developed for the FreeBSD project. This product includes software developed for the Internet Software Con- sortium by Ted Lemon. This product includes software developed for the NetBSD Project by Frank van der Linden. This product includes software developed for the NetBSD Project by Jason R. Thorpe. This product includes software developed for the NetBSD Project by John M. Vinopal. This product includes software developed for the NetBSD Project by Matthias Drochner. This product includes software developed for the NetBSD Project by Matthieu Herrb. This product includes software developed for the NetBSD Project by Perry E. Metzger. This product includes software developed for the NetBSD Project by Pier- mont Information Systems Inc. This product includes software developed for the NetBSD Project by Ted Lemon. This product includes software developed by LAN Media Corporation and its contributors. This product includes software developed by Michael Graff for the NetBSD Project. This product includes software developed by Niklas Hallqvist, C Stone and Job de Haas. This product includes software developed by Mark Brinicombe. This product includes software developed by Neil Carson. This product includes software developed by Scott Stevens. NetBSD 23 March 1999 30