INSTALL(8) NetBSD System Manager's Manual INSTALL(8) NAME INSTALL - Installation procedure for NetBSD/mac68k. CONTENTS About this Document............................................1 What is NetBSD?................................................2 Upgrade path to NetBSD 1.5.3...................................2 Major Changes Between 1.5.2 and 1.5.3..........................2 Known Caveats with 1.5.3.......................................4 Major Changes Between 1.5.1 and 1.5.2..........................4 Major Changes Between 1.5 and 1.5.1............................4 Changes Between The NetBSD 1.4 and 1.5 Releases................6 Kernel......................................................7 Networking..................................................7 File system.................................................7 Security....................................................8 System administration and user tools........................8 Miscellaneous...............................................8 The Future of NetBSD...........................................9 Sources of NetBSD.............................................10 NetBSD 1.5.3 Release Contents.................................10 NetBSD/mac68k subdirectory structure.......................11 Binary distribution sets...................................12 NetBSD/mac68k System Requirements and Supported Devices.......13 Supported models...........................................13 Supported devices..........................................14 Unsupported models.........................................14 Known hardware issues with this release....................14 Getting the NetBSD System on to Useful Media..................15 Preparing your System for NetBSD installation.................15 Installing the NetBSD System..................................16 Preparing the file system(s)...............................16 Installing the files.......................................17 Installation of base files.................................18 Booting the system.........................................18 Post installation steps.......................................19 Upgrading a previously-installed NetBSD System................21 Compatibility Issues With Previous NetBSD Releases............23 General issues.............................................24 Issues affecting an upgrade from NetBSD 1.4 or prior.......24 Using online NetBSD documentation.............................24 Administrivia.................................................25 Thanks go to..................................................25 We are........................................................28 Legal Mumbo-Jumbo.............................................31 The End.......................................................33 DESCRIPTION About this Document This document describes the installation procedure for NetBSD 1.5.3 on the mac68k platform. It is available in four different formats titled INSTALL.ext, where .ext is one of .ps, .html, .more, or .txt: .ps PostScript. .html Standard Internet HTML. .more The enhanced text format used on UNIX-like systems by the more(1) and less(1) pager utility programs. This is the format in which the on-line man pages are generally pre- sented. .txt Plain old ASCII. You are reading the ASCII version. What is NetBSD? The NetBSD Operating System is a fully functional Open Source UNIX-like operating system derived from the University of California, Berkeley Net- working Release 2 (Net/2), 4.4BSD-Lite, and 4.4BSD-Lite2 sources. NetBSD runs on thirty-one different system architectures featuring twelve dis- tinct families of CPUs, and is being ported to more. The NetBSD 1.5.3 re- lease contains complete binary releases for fifteen different machine types. (The sixteen remaining are not fully supported at this time and are thus not part of the binary distribution. For information on them, please see the NetBSD web site at http://www.netbsd.org/.) NetBSD is a completely integrated system. In addition to its highly portable, high performance kernel, NetBSD features a complete set of user utilities, compilers for several languages, the X Window System, firewall software and numerous other tools, all accompanied by full source code. NetBSD is a creation of the members of the Internet community. Without the unique cooperation and coordination the net makes possible, it's likely that NetBSD wouldn't exist. Upgrade path to NetBSD 1.5.3 If you are not installing your system ``from scratch'' but instead are going to upgrade an existing system already running NetBSD you need to know which versions you can upgrade with NetBSD 1.5.3. NetBSD 1.5.3 is an upgrade of NetBSD 1.5, 1.5.1, 1.5.2, and earlier major and maintenance releases of NetBSD. The intermediate development versions of code available on the main trunk in our CVS repository (also known as ``NetBSD-current'') from after the point where the release cycle for 1.5 was started are designated by ver- sion identifiers such as 1.5A, 1.5B, etc. These identifiers do not des- ignate releases, but indicate major changes in internal kernel APIs. Note that the kernel from NetBSD 1.5.3 can not be used to upgrade a sys- tem running one of those intermediate development versions. Trying to use the NetBSD 1.5.3 kernel on such a system will probably result in problems. Please also note that it is not possible to do a direct ``version'' com- parison between any of the intermediate development versions mentioned above and 1.5.3 to determine if a given feature is present or absent in 1.5.3. The development of 1.5 and the subsequent maintenance releases is done on a separate branch in the CVS repository. The branch was created when the release cycle for 1.5 was started, and during the release cycle of 1.5 and its maintenance releases, selected fixes and enhancements have been imported from the main development trunk. So, there are features in 1.5.3 which were not in, e.g. 1.5B, and vice versa. Major Changes Between 1.5.2 and 1.5.3 Some highlights are: o lpd(8) has been fixed to deal with a security issue (SA2001-018). o Drivers for Mylex DAC960, Compaq EISA array controllers, and I2O block/SCSI devices added. This has caused ca(4) to be replaced by ld(4). Drivers for the Mylex DAC960 management interface and DPT/Adaptec I2O RAID management interface has also been added. See dpti(4) and mlxctl(8). o A driver for the 3ware Escalade 5000 and 6000 series RAID controllers has been added, see twe(4). o Various different fixes have been applied to the network device drivers ep(4), ex(4), rtk(4), sip(4), ti(4), tl(4), and wi(4). o Support for some more variants of rtk(4) on CardBus has been added. o The ne(4) driver has been extended to support some more pcmcia cards. o Support for more pciide(4) controllers added: HPT-370A, Acard ATP-850/860, and AMD-768. Ultra-DMA 100 support added for CMD 0649. o A problem with the NFS server code, exposed on NetBSD/alpha, where use of ``..'' would return info for ``.'' has been fixed. o Support for ``other-endian'' file systems has been improved. o The layout algorithm for FFS file systems has been substantially im- proved, resulting in better performance, both due to improved locali- ty between files and their corresponding directory, and lessened pressure on the buffer cache. o The performance of soft dependencies in FFS has been significantly improved in some circumstances. o Handling of init/fini section support and DWARF2 exception handling has been added to the C runtime startup code. o OpenSSH has been upgraded to version 3.0.2. o A security issue arising from a race between set-uid execution and use of ptrace has been fixed (SA2002-001). o The package tools has been extended to provide for optional digital signatures on binary packages. Additionally, binary package version number handling has been rewritten. o A driver for Creative Labs SBLive! EMU10000 has been added; see emuxki(4). o A driver for ESS Allegro-1 / Maestro-3 has been added; see esa(4). o Support for the 53c1010-33 and 53c1510D has been added to the siop(4) driver. o IPFilter upgraded to 3.4.23. o The boot code on NetBSD/macppc has been improved. o sendmail(8) has been upgraded to version 8.11.6. o A long file name buffer overrun in gzip has been fixed (SA2002-002). o IPSEC policy check has been fixed for forwarded IPv4 packets (SA2002-003). o Two security problems in OpenSSH has been fixed (SA2002-004, SA2002-005). o A buffer overrun in the resolver part of the C library has been fixed (SA2002-006). To fix this problem in the BIND user utilities, BIND has been upgraded to version 8.3.3. o Various other kernel stability and robustness fixes has been applied. In addition, many bugs have been fixed--more than 70 problems reported through our problem tracking system have been fixed, and several other non-reported problems have also been found and fixed. See the CHANGES-1.5.3 file for the complete list. Known Caveats with 1.5.3 The following are the major known issues with NetBSD 1.5.3. o The upgrade of IPFilter to version 3.4.23 is not backward compatible. This means that the user-land tools used to manage IPFilter will have to be upgraded when the kernel is upgraded. o Due to xsrc changes which are not backward compatible on the arm32 port, the X bits for arm32 is built from the 1.5.2 sources. Major Changes Between 1.5.1 and 1.5.2 The main purpose of NetBSD 1.5.2 is to fix some problems discovered shortly after the release of NetBSD 1.5.1. Some highlights are: o telnetd(8) has been fixed to deal with a security issue (SA2001-012). o A weakness in the OpenSSL libcrypto's pseudo random number generator has been fixed (SA2001-013). o Floating point emulation on i386 (to run on FPU-less CPUs) which was broken late in 1.5.1's cycle has been restored to working order. o Bugs in the compiler have been worked around to produce a working miniroot image on sparc64. o The script-based installers on amiga, atari and mvme68k have been up- dated to deal with new behaviour from mount(8). o dump(8) has been fixed to deal with a local security issue (SA2001-014). o Several system calls have had defensive length checks applied on their arguments (SA2001-015). o The DHCP software has been upgraded to ISC Version 3, Release Candi- date 10. Additionally, a few more bugs have been fixed. See the CHANGES-1.5.2 file for the complete list of changes. Major Changes Between 1.5 and 1.5.1 The complete list of changes between NetBSD 1.5 and 1.5.1 can be found in the file CHANGES-1.5.1 in the top directory of the source tree. The fol- lowing are highlights only: o A driver for the Aironet/Cisco wireless PCMCIA cards has been added; see an(4). o NFS client performance has been improved, typically by 40% for writes but possibly up to 100% in certain setups. o The siop(4) driver has improved in performance and robustness. o Support for cloning pseudo-interfaces has been added. See ifconfig(8). o Support for 802.1Q virtual LANs has been added. See vlan(4). o The isp(4) driver has been upgraded to (among other things) work on MacPPC. o BIND has been upgraded to version 8.2.3 (SA2001-001). o Support for booting from RAIDframe RAID1 mirrors on i386 added. o The lfs(4) file system has again been substantially updated, but is still experimental. o Ultra/66 support has been added for capable VIA chipsets, and Ul- tra/100 support has been added for the HPT370, Promise and Intel ICH2 controllers in the pciide(4) driver. Support for Intel 82801BAM con- trollers has also been added, and handling of Ali controllers has been improved. o OpenSSH has been updated to deal with a security issue (SA2001-003). o Sendmail has been upgraded to version 8.11.3. o The ex(4) driver has added support for 3Com 3c555, 3c556 and 3c556B MiniPCI Ethernet cards. o A driver for the on-board audio hardware found on many Apple PowerMa- cs has been added; see awacs(4). o The sip(4) driver has been fixed to properly support the dp83815, as found in current Netgear FA311 10/100 cards. o ftpd(8) has been updated to deal with two security issues (SA2000-018 and SA2001-005). o ntpd(8) has been updated to deal with a security issue (SA2001-004). o telnetd(8) has been updated to deal with a security issue (SA2000-017). o A vulnerability on i386 related to USER_LDT has been fixed (SA2001-002). o The Linux emulation has been enhanced to prepare for the support of using the Linux version of VMware. o IP checksumming speed has been improved on i386 compared to NetBSD 1.5 by about 10%. o Support for the Socket Communications LP-E Type II PCMCIA NE2000 clone card has been added to ne(4). o The DHCP software has been upgraded to ISC version 3, Beta 2, patch- level 24, to fix core dumps in dhclient(8), among other things. Please note that the new dhcpd(8) forces you to configure a "ddns-up- date-style" of either "ad-hoc", "interim" or "none". o Various fixes and enhancements to INET6 and IPSEC code; among them improved interaction between IPF/Nat and IPSEC. o The Heimdal kerberos(8) implementation has been upgraded to version 0.3e. o Support for Accton EN2242 and other AmdTek AN985 cards added to the tlp(4) driver. o Several country-specific keyboard mappings have been added for USB keyboards. o A driver for Yamaha YMF724/740/744/745-based sound cards has been added, see yds(4). o The maximum number of BSD disklabel partitions on the i386 port has been increased from 8 to 16. o Drivers for the AC'97 based audio sound chips ESS Technology Maestro 1, 2, and 2E (see esm(4)), NeoMagic 256 (see neo(4)), and Cirrus Log- ic CrystalClear PCI Audio CS4281 (see clct(4)) have been added. In addition, many bugs have been fixed--more than 95 problems reported through our problem tracking system have been fixed, and some other non- reported problems have also been found and fixed. See the CHANGES-1.5.1 file for the complete list. The NetBSD Packages Collection (pkgsrc) which is used to maintain, build, track dependencies, and maintain NetBSD-specific fixes to third-party programs, has received a major overhaul for NetBSD 1.5.1. Some high- lights are: o Many new packages were added to the collection, which now includes about 2100 packages. Many of them are also available as pre-compiled binaries on ftp.netbsd.org and its mirrors. Many packages have been modified and enhanced to compile and function properly on big-endian (m68k, sparc), and LP64 architectures (alpha, sparc64). o KDE2 and KOffice together consitutes a fully integrated office envi- ronment with no license problems, available for i386, alpha and many other architectures. o Mozilla 0.9, KDE2's Konqueror, and Links 0.95 are just a few examples of the web browsers available. o A support package for running VMware on NetBSD/i386 was added, it's called suse_vmware. The official VMware code, a valid license, and Wasabi Systems' compatibility package are all needed to run VMware. o Internal changes of the pkgsrc system include strong checksums to prevent malicious distribution files, as well as restructuring of the package structure in pkgsrc for faster extraction of pkgsrc tar files and upgrades via SUP and CVS. Please note that at the moment, sysinst will not assist you in installing pre-built third-party binary packages or the pkgsrc system itself, so you will have to manually install packages using pkg_install or fetch and ex- tract the pkgsrc.tgz tar file to get started. Lastly, it should be noted that the X11 binaries shipped in NetBSD 1.5.3 is still based on XFree86 version 3.3.6. Several newer graphics cards are inadequately supported by that code base, but on the other hand sup- port for several older graphics cards is not available in newer XFree86 code. NetBSD is in the process of moving to XFree86 version 4, and is currently maintaining both the XFree86 3.3.6 and the XFree86 version 4 code in the xsrc source set, and you may at compile time pick which sources to build and install. To ease installation, testing and use of the XFree86 version 4 code, a binary snapshot based on XFree86 version 4.0.3 will be made available for at least the i386 architecture shortly after the release of NetBSD 1.5.3. Changes Between The NetBSD 1.4 and 1.5 Releases The NetBSD 1.5 release provides numerous significant functional enhance- ments, including support for many new devices, integration of hundreds of bug fixes, new and updated kernel subsystems, and many userland enhance- ments. The result of these improvements is a stable operating system fit for production use that rivals most commercially available systems. It is impossible to completely summarize over one year of development that went into the NetBSD 1.5.3 release. Some highlights include: Kernel o Ports to new platforms including: arc, cobalt, hpcmips, news68k, sgimips, and sparc64. o Improved performance and stability of the UVM virtual memory subsys- tem. o Implementation of generic kernel locking code, as well as a restruc- ture and re-tuning of the scheduler, to be used by the future symmet- ric multi-processing (SMP) implementation. o Improved compatibility support for Linux, OSF1, and SVR4 programs. o New compatibility support for Win32 programs. o Support for dynamically loaded ELF kernel modules. o Kernel process tracing using ktruss(1). o Deletion of swap devices using swapctl(8). o Easier hot-pluggability of keyboards and mice using a new wscons de- vice--wsmux. o Improved PCMCIA and CardBus support, including support for detaching of devices and cards, resulting in better support for notebooks and PDA devices. o Numerous hardware improvements, including areas such as: audio, UD- MA/66 support for ATA drives, USB, and wireless networking. Networking o Addition of IP version 6 (IPv6) and IPsec to the networking stack, from the KAME project. This includes addition of kernel code for IPv6/IPsec, IPv4/v6 dual-stack user applications and supporting li- braries. Due to this, the shlib major version for pcap(3) is incre- mented and you may need to recompile userland tools. The KAME IPv6 part includes results from the unified-IPv6 effort. File system o Significant Fast file system (FFS) performance enhancements via inte- gration of Kirk McKusick's soft updates and trickle sync code. o Support for the Windows NT `NTFS' file system (read-only at this stage). o Support for revision 1 of the Linux `ext2fs' file system. o Enhanced stability and usability of LFS (the BSD log-structured file system). o Various RAIDframe enhancements including: auto-detection of RAID com- ponents and auto-configuration of RAID sets, and the ability to con- figure the root file system (/) on a RAID set. o Support for Microsoft Joliet extensions to the ISO9660 CD file sys- tem. o Improved file system vnode locking mechanisms, thus resolving a source of several panics in the past. o Support for NFS and RPC over IPv6. o The server part of NFS locking (implemented by rpc.lockd(8)) now works. Security o Strong cryptographic libraries and applications integrated, including the AES cipher Rijndael, the OpenSSL library, more complete Kerberos IV and Kerberos V support, and an SSH server and client. o sysctl(3) interfaces to various elements of process and system infor- mation, allowing programs such as ps(1), dmesg(1) and the like to op- erate without recompilation after kernel upgrades, and remove the ne- cessity to run setgid kmem (thus improving system security). o Disable various services by default, and set the default options for disabled daemons to a higher level of logging. o Several code audits were performed. One audit replaced string rou- tines that were used without bounds checking, and another one identi- fied and disabled places where format strings were used in unsafe ways, allowing arbitrary data to be entered by (possibly) malicious users to overwrite application code, and leading from Denial of Ser- vice attacks to compromised systems. o sshd(8) and ssh(1) now require rnd(4) kernel random number devices. System administration and user tools o Conversion of the rc(8) system startup and shutdown scripts to an `rc.d' mechanism, with separate control scripts for each service, and appropriate dependency ordering provided by rcorder(8). o postfix(1) provided as alternative mail transport agent to sendmail(8). o User management tools useradd(8), usermod(8), userdel(8), groupadd(8), groupmod(8), and groupdel(8) added to the system. o Incorporation of a login class capability database (/etc/login.conf) from BSD/OS. o Improved support for usernames longer than eight characters in pro- grams such as at(1) and w(1). o Many enhancements to ftpd(8) providing features found in larger and less secure FTP daemons, such as user classes, connection limits, im- proved support for virtual hosting, transfer statistics, transfer rate throttling, and support for various IETF ftpext working group extensions. o The ftp(1) client has been improved even further, including transfer rate throttling, improved URL support, command line uploads. See the man page for details. Miscellaneous o Updates to the NetBSD source code style code (located in /usr/share/misc/style) to use ANSI C only (instead of K&R) and re- flect current (best) practice, and begin migrating the NetBSD source code to follow it. o Implementation of many SUSv2 features to the curses(3) library, in- cluding support for color. o Updates of most third party packages that are shipped in the base system, including file(1), ipfilter(4), ppp(4), and sendmail(8) to the latest stable release. o Many new packages in the pkgsrc system, including standard desktops like KDE and GNOME as well as latest Tcl/Tk and perl and many of the components of the Java Enterprise platform. The package framework itself now has full wildcard dependency support. Kernel interfaces have continued to be refined, and more subsystems and device drivers are shared among the different ports. You can look for this trend to continue. NetBSD 1.5.3 is the sixth major release of NetBSD for the m68k-based Mac- intosh. For the mac68k port, NetBSD 1.5.3 brings a number of improvements: o Serial console support on the Quadra 900/950. o wscons integration. There is still a lot of work to be done and help is welcomed. Please jump in! NetBSD 1.5.3 on mac68k is, as usual, also fully backward compatible with old NetBSD/mac68k binaries, so you don't need to recompile all of your local programs. The Future of NetBSD The NetBSD Foundation has been incorporated as a non-profit organization. Its purpose is to encourage, foster and promote the free exchange of com- puter software, namely the NetBSD Operating System. The foundation will allow for many things to be handled more smoothly than could be done with our previous informal organization. In particular, it provides the framework to deal with other parties that wish to become involved in the NetBSD Project. The NetBSD Foundation will help improve the quality of NetBSD by: o providing better organization to keep track of development efforts, including co-ordination with groups working in related fields. o providing a framework to receive donations of goods and services and to own the resources necessary to run the NetBSD Project. o providing a better position from which to undertake promotional ac- tivities. o periodically organizing workshops for developers and other interested people to discuss ongoing work. We intend to begin narrowing the time delay between releases. Our ambi- tion is to provide a full release every six to eight months. We hope to support even more hardware in the future, and we have a rather large number of other ideas about what can be done to improve NetBSD. We intend to continue our current practice of making the NetBSD-current development source available on a daily basis. We intend to integrate free, positive changes from whatever sources sub- mit them, providing that they are well thought-out and increase the us- ability of the system. Above all, we hope to create a stable and accessible system, and to be responsive to the needs and desires of NetBSD users, because it is for and because of them that NetBSD exists. Sources of NetBSD Refer to http://www.netbsd.org/Sites/net.html. NetBSD 1.5.3 Release Contents The root directory of the NetBSD 1.5.3 release is organized as follows: .../NetBSD-1.5.3/ CHANGES Changes since earlier NetBSD releases. LAST_MINUTE Last minute changes. MIRRORS A list of sites that mirror the NetBSD 1.5.3 distribution. README.files README describing the distribution's contents. TODO NetBSD 's todo list (also somewhat incomplete and out of date). patches/ Post-release source code patches. source/ Source distribution sets; see below. In addition to the files and directories listed above, there is one di- rectory per architecture, for each of the architectures for which NetBSD 1.5.3 has a binary distribution. There are also README.export- control files sprinkled liberally throughout the distribution tree, which point out that there are some portions of the distribution that may be subject to export regulations of the United States, e.g. code under src/crypto and src/sys/crypto. It is your responsibility to determine whether or not it is legal for you to export these portions and to act accordingly. The source distribution sets can be found in subdirectories of the source subdirectory of the distribution tree. They contain the complete sources to the system. The source distribution sets are as follows: gnusrc This set contains the ``gnu'' sources, including the source for the compiler, assembler, groff, and the other GNU utilities in the binary distribution sets. 22.3 MB gzipped, 98.8 MB uncompressed pkgsrc This set contains the ``pkgsrc'' sources, which contain the in- frastructure to build third-party packages. 7.4 MB gzipped, 73.0 MB uncompressed sharesrc This set contains the ``share'' sources, which include the sources for the man pages not associated with any particular program; the sources for the typesettable document set; the dictionaries; and more. 3.3 MB gzipped, 13.2 MB uncompressed src This set contains all of the base NetBSD 1.5.3 sources which are not in gnusrc, sharesrc, or syssrc. 24.8 MB gzipped, 123.1 MB uncompressed syssrc This set contains the sources to the NetBSD 1.5.3 kernel for all architectures; config(8); and dbsym(8). 18.0 MB gzipped, 90.9 MB uncompressed xsrc This set contains the sources to the X Window System. 78.1 MB gzipped, 393.6 MB uncompressed All the above source sets are located in the source/sets subdirectory of the distribution tree. The source sets are distributed as compressed tar files. They may be un- packed into /usr/src with the command: # ( cd / ; tar -zxpf - ) < set_name.tgz The sets/Split/ subdirectory contains split versions of the source sets for those users who need to load the source sets from floppy or otherwise need a split distribution. The split sets are named set_name.xx where set_name is the distribution set name, and xx is the sequence number of the file, starting with ``aa'' for the first file in the distribution set, then ``ab'' for the next, and so on. All of these files except the last one of each set should be exactly 240,640 bytes long. (The last file is just long enough to contain the remainder of the data for that distri- bution set.) The split distributions may be reassembled and extracted with cat as fol- lows: # cat set_name.?? | ( cd / ; tar -zxpf - ) In each of the source distribution set directories, there are files which contain the checksums of the files in the directory: BSDSUM Historic BSD checksums for the various files in that di- rectory, in the format produced by the command: cksum -o 1 file. CKSUM POSIX checksums for the various files in that directory, in the format produced by the command: cksum file. MD5 MD5 digests for the various files in that directory, in the format produced by the command: cksum -m file. SYSVSUM Historic AT&T System V UNIX checksums for the various files in that directory, in the format produced by the command: cksum -o -2 file. The MD5 digest is the safest checksum, followed by the POSIX checksum. The other two checksums are provided only to ensure that the widest pos- sible range of system can check the integrity of the release files. NetBSD/mac68k subdirectory structure The mac68k-specific portion of the NetBSD 1.5.3 release is found in the mac68k subdirectory of the distribution: .../NetBSD-1.5.3/mac68k/ INSTALL.html INSTALL.ps INSTALL.txt INSTALL.more Installation notes in various file formats, including this file. The .more file contains underlined text using the more(1) conventions for indicating italic and bold display. binary/ kernel/ netbsd.GENERIC.gz A gzipped NetBSD kernel containing code for everything supported in this release. sets/ mac68k binary distribution sets; see below. installation/ floppy/ mac68k boot and installation floppies; see be- low. misc/ Miscellaneous mac68k installation utilities; see installation section, below. Binary distribution sets The NetBSD mac68k binary distribution sets contain the binaries which comprise the NetBSD 1.5.3 release for the mac68k. There are eight binary distribution sets. The binary distribution sets can be found in the mac68k/binary/sets subdirectory of the NetBSD 1.5.3 distribution tree, and are as follows: base The NetBSD 1.5.3 mac68k base binary distribution. You must in- stall this distribution set. It contains the base NetBSD utili- ties that are necessary for the system to run and be minimally functional. It includes shared library support, and excludes everything described below. 15.7 MB gzipped, 41.6 MB uncompressed comp Things needed for compiling programs. This set includes the system include files (/usr/include) and the various system li- braries (except the shared libraries, which are included as part of the base set). This set also includes the manual pages for all of the utilities it contains, as well as the system call and library manual pages. 11.8 MB gzipped, 39.7 MB uncompressed etc This distribution set contains the system configuration files that reside in /etc and in several other places. This set must be installed if you are installing the system from scratch, but should not be used if you are upgrading. 0.1 MB gzipped, 0.6 MB uncompressed games This set includes the games and their manual pages. 3.0 MB gzipped, 7.4 MB uncompressed kern This set contains a NetBSD/mac68k 1.5.3 GENERIC kernel, named /netbsd. You must install this distribution set. man This set includes all of the manual pages for the binaries and other software contained in the base set. Note that it does not include any of the manual pages that are included in the other sets. 5.6 MB gzipped, 22.7 MB uncompressed misc This set includes the (rather large) system dictionaries, the typesettable document set, and other files from /usr/share. 2.2 MB gzipped, 7.5 MB uncompressed text This set includes NetBSD's text processing tools, including groff(1), all related programs, and their manual pages. 1.3 MB gzipped, 4.7 MB uncompressed NetBSD maintains its own set of sources for the X Window System in order to assure tight integration and compatibility. These sources are based on XFree86, and tightly track XFree86 releases. The binaries shipped with NetBSD 1.5.3 are based on XFree86 version 3.3.6. NetBSD is in the process of moving to XFree86 version 4, and the X source set actually contains source for both XFree86 3.3.6 and XFree86 4, and the ability to decide at compile-time which one to build and install. The X Window Sys- tem binary sets distributed with NetBSD are: xbase The basic files needed for a complete X client environment. This does not include the X servers. 2.6 MB gzipped, 8.2 MB uncompressed xcomp The extra libraries and include files needed to compile X source code. 1.7 MB gzipped, 7.2 MB uncompressed xcontrib Programs that were contributed to X. 0.2 MB gzipped, 0.7 MB uncompressed xfont Fonts needed by X. 6.2 MB gzipped, 7.5 MB uncompressed xserver The Xmac68k Em monochrome server with man pages. 1.4 MB gzipped, 3.4 MB uncompressed The mac68k binary distribution sets are distributed as gzipped tar files named with the extension .tgz, e.g. base.tgz. The instructions given for extracting the source sets work equally well for the binary sets, but it is worth noting that if you use that method, the files are /-relative and therefore are extracted below the current directory. That is, if you want to extract the binaries into your system, i.e. replace the system binaries with them, you have to run the tar -xpf command from /. Additional kernels to those included in the distribution sets may be found in the mac68k/binary/kernels subdirectory of the NetBSD 1.5.3 dis- tribution tree. These kernels are generally named something like netbsd- GENERIC.gz or some other suitable name. Please note that these kernels are simply gzipped and are not in tar archives. The MacOS based utilities necessary for installing and running NetBSD can be found in the mac68k/installation/misc subdirectory of the NetBSD 1.5.3 distribution tree. The important files in this directory are as follows: Booter.sea.hqx The NetBSD/mac68k Booter utility. This program is used to boot the NetBSD kernel from within MacOS. 141 KB archived Installer.sea.hqx The NetBSD/mac68k Installer utility. This program is used to install the distribution sets onto your NetBSD partition(s). 147 KB archived Mkfs.sea.hqx The Mkfs utility. This program is used to format your chosen partitions so that they can be used with NetBSD. 76 KB archived These files are all binhexed, self-extracting archives. If you need them, the sources for these utilities are in the src subdirectory. Note: Each directory in the mac68k binary distribution also has its own checksum files, just as the source distribution does. NetBSD/mac68k System Requirements and Supported Devices NetBSD/mac68k 1.5.3 runs on several of the older Macintosh computers. About 4 MB of RAM might be sufficient to boot, and the system can proba- bly be squeezed onto a 40 MB hard disk by leaving off an unnecessary set or two. To actually do much compiling or anything more interesting than booting, at least 8 MB of RAM and more disk space is recommended. About 95 MB will be necessary to install all of the NetBSD 1.5.3 binary system distribution sets (note that this does not count swap space!). An addi- tional 30 MB or so is needed for the binary X11 distribution sets. Much more disk space is required to install the source and objects as well (at least another 300 MB). Supported models o Mac II, IIx, IIcx, SE/30, IIci, IIsi, IIvx, IIvi o Performa 400/405/410/430, Performa 450, Performa 460/466/467 o Performa 520, Performa 550/560, Performa 600 o LC II, LC III, LC III+, LC 520, LC 550 o MacTV o Centris 650 o Quadra 610, Quadra 630, Quadra 650, Quadra 700, Quadra 800 o Quadra/Centris 660AV, Quadra 840AV Supported devices o Onboard SCSI bus and most SCSI tapes, hard drives, and CD-ROMs o Internal sound - enough to beep on some machines, anyway o Most basic NuBus video cards (there have been some problems with some 24-bit color cards and with most QuickDraw acclera- tors) o Both internal serial ports o ADB keyboards and mice (both Apple and a number of third party multi-button mice and trackballs are supported) o Ethernet cards based on the National Semiconductor 8390 and the SONIC (DP83932) chips (Asante, Apple, and a few others - prob- lems still with Ethernet and many NuBus video cards) o Ethernet cards based on the SMC 91c92 and 91c100 (FEAST) chips. This includes the AsanteFAST 10/100 cards o Onboard Ethernet based on the SONIC chip for Quadra-series Macs o Onboard Ethernet based on the MACE (Am79C940) chip for the Quadra AV-series Macs o Comm-slot Ethernet should be working for most machines/cards If your 68030 system is not listed above, it may be because of a problem with accessing onboard video, and it may still work with a serial con- sole. Some of the known ones in this category: o Classic-series Macs o PowerBook 100-series and Duo-series Macs If your 68LC040 system is not listed above, it is due to a problem with floating point emulation (FPE) for this type of processor. Machines in this category include: o Newer LC-series machines o Newer Performa-series machines o Some PowerBook 500-series Macs Unsupported models o Macintosh IIfx This machine has unusual custom chips for the ADB and serial interfaces which make support for it difficult. Work is in progress on this, though. o Quadra 900/950 These machines have I/O processor chips for their ADB inter- faces similar to those used in the IIfx and thus face similar support problems. o PowerPC-based Macs This is a separate effort from the mac68k port. PowerMacs use hardware that is often fairly different from that of the mac68k port. If you are interested in this, you might want to take a look at the new NetBSD/macppc port: http://www.netbsd.org/Ports/macppc/index.html Known hardware issues with this release o Real Time Clock Due to oddities of the Macintosh hardware interrupt priority scheme, NetBSD/mac68k keeps very poor time. Under a high inter- rupt load (e.g. SCSI or serial port activity) , a machine can lose several minutes per hour. A consequence of this problem is that attempting to run xntpd is rather pointless unless you pe- riodically call ntpdate. o SCSI difficulties The NetBSD/mac68k SCSI drivers are not quite as robust as their MacOS counterparts. Symptoms of these problems are that some SCSI disks will not work under NetBSD that work fine under MacOS. Other problems include occasional file system corrup- tion with some types of drives and the general unreliability of removable SCSI media. Keep in mind that there are no clear patterns with these problems, and they do not appear to affect the majority of users. Getting the NetBSD System on to Useful Media Installation is currently only supported from the local Macintosh hard drive, from a CD-ROM, or from an AppleShare volume (however, you may up- grade a system from within NetBSD ; see the section on upgrading for more details). If you are installing from a local hard drive, this means that you'll need at least enough room for the largest file that you will have to install. This is the 15.2 MB base.tgz file. There has been talk of allowing an install from split files. If you have the time, desire, and knowledge, please feel free to add that functionality. If the install is being done from an AppleShare-mounted volume, the in- stall utility must be in the same folder as the binary distribution sets. Each distribution file is in raw archive format. o Distribution files must be downloaded in binary mode. Common web browsers may not be suitable for this task; FTP clients such as Fetch and Anarchie work fine, but be sure to specify a binary file trans- fer. o The files should not be unpacked. If you have the Internet Config extension installed, you can disable this in the ``Helpers'' dialog by removing the entry associated with ``.tgz'' files. Other FTP clients may require separate changes; consult your package's documen- tation. o If you are installing from a CD-ROM, the distribution sets are al- ready in the proper format and no special handling is required. You will also need to collect the MacOS installation tools from the mac68k/installation/misc subdirectory of the NetBSD 1.5.3 distribution: Mkfs, NetBSD/mac68k Installer, and NetBSD/mac68k Booter. These three are in binhexed, self-extracting archives as Mkfs.sea.hqx, Installer.sea.hqx, and Booter.sea.hqx, respectively. Extract them as you would any other Macintosh application. Preparing your System for NetBSD installation Find your favorite disk partitioning utility. Any formatter capable of partitioning a SCSI disk should work. Some of the ones that have been tried and seem to work are: o Apple HD SC Setup o Hard Disk ToolKit from FWB o SCSI Director Lite o Disk Manager Mac from OnTrack o Silverlining from LaCie o APS Disk Tools Apple's HD SC Setup is probably the easiest to use and the most commonly available. Instructions for patching HD SC Setup so that it will recog- nize non-Apple drives is available at: http://www.euronet.nl/users/ernstoud/patch.html First, you need to choose a drive on which to install NetBSD. Try to pick a drive with a low SCSI-ID number, especially if you are likely to add or remove drives to your SCSI chain in the future. Note: Be sure you have a reliable backup of any data which you may want to keep. Repartitioning your hard drive is an excellent way to destroy important data. Second, decide how you want to set up your partitions. At minimum, you need a partition to hold the NetBSD installation (the root partition - /) and a partition to serve as swap. You may choose to use more than one partition to hold the installation. This allows you to separate the more vital portions of the file system (such as the kernel and the /etc direc- tory) from the more volatile parts of the file system. Typical setups place the /usr directory on a separate partition from the root partition (/). Generally, / can be fairly small while the /usr partition should be fairly large. If you plan to use this machine as a server, you may also want a separate /var partition. Once you have decided how to lay out your partitions, you need to calcu- late how much space to allocate to each partition. A minimal install of NetBSD (i.e. netbsd.tgz, base.tgz, and etc.tgz) should just fit in a 32 MB partition. For a full installation, you should allocate at least 95 MB (150 MB if you wish to install the X sets as well). A general rule of thumb for sizing the swap partition is to allocate twice as much swap space as you have real memory. Having your swap + real memory total at least 20 MB is also a good idea. Systems that will be heavily used or that are low on real memory should have more swap space allocated. Sys- tems that will be only lightly used or have a very large amount of real memory can get away with less. Keep in mind that NetBSD currently requires MacOS in order to boot, so it is likely that you will want to keep at least a minimal install of MacOS around on an HFS partition for this purpose. The size of this partition may vary depending on the size requirements for the version of MacOS you are using. Of course, if you have MacOS on another hard drive or can boot from a floppy, feel free to dedicate the entire drive to NetBSD. Next, use your favorite partitioning utility to make partitions of the necessary sizes. You can use any type of partition, but partitions of type Apple_Free might save you some confusion in the future. You are now set to install NetBSD on your hard drive. Installing the NetBSD System The installation can be broken down into three basic steps: o Run Mkfs to build a file system or file systems. o Run the Installer to load the files onto your file systems. o Run the Booter to boot the system. Preparing the file system(s) Double-click on the Mkfs application icon to start it up. It will ask you for the SCSI-ID of the drive that you are installing upon. Once this is selected, it will present a list of the partitions on that disk. You must first convert the partitions to a type which NetBSD can understand. Se- lect each partition on which you wish to build a file system and click on the ``Change'' button. If you are placing the entire installation on a single partition, select the ``NetBSD Root&Usr'' radio button. If you are using multiple partitions, select ``NetBSD Root'' for the root partition (/) and ``NetBSD Usr'' for all the other partitions. You should select ``NetBSD Swap'' for the swap partition. When you have finished converting each partition, select each partition and click on the ``Format'' button. You will now be asked for a bunch of parameters for the hard drive and the file system. Usually, you can just take the defaults. If you are installing onto removable media (e.g. a Zip, Jaz, or Syquest), please see the FAQ. Note that although this dialog only has the ``OK'' button, you are not committed, yet. Once you get the values you want, press the ``OK'' button. A dialog will be presented at this point with two options: ``Format'' and ``Cancel''. If you choose ``Cancel'', nothing will be written to your drive. If you choose ``Format'', the program will proceed to make a file system. Mkfs is not a well-behaved Macintosh application. It will not allow any other tasks to run while it does (cooperative multitasking at its best). When it's finished, the program will put up a dialog to ask if you have scanned the output for any error messages. Usually there won't have been any errors, but do scan the output to make sure. Simply click on the ``I Read It'' button and the program will quit. Repeat as necessary for any extra partitions that you wish to make file systems on. Note that you do not need a file system on your swap parti- tion. When you are finished, click on the ``Done'' button and choose ``Quit'' from the ``File'' menu to exit Mkfs. Installing the files Before using the Installer, it is probably a good idea to increase its memory allocation. Select the Installer icon by clicking on it and choose ``Get Info'' from the File menu. Increase both the Minimum and Preferred sizes to as much as you can spare. Double-click on the Installer icon to start it up. The Installer will present the same SCSI-ID menu that Mkfs did. Select the same SCSI-ID that you did for Mkfs - i.e., the one you are installing onto. If you are installing onto a single root partition (/), proceed to the Installation of base files section, below. If you have not created file systems for / (root), usr, and any other file systems, go back to Preparing the file system(s) above. When you started the Installer, it mounted your root partition (/). Just before it printed, Mounting partition 'A' as / , it printed lines like: sd1 at scsi ID 5. This means that the device for SCSI-ID 5 is sd1. The partitions are sig- nified by a trailing letter. For instance, sd1a would be the root parti- tion (/) of the second SCSI disk in the chain, and sd0g would be the first Usr partition on the first SCSI disk. You will need to know the proper device to mount the remaining parti- tion(s) by hand: 1. Select ``Build Devices'' from the ``File'' menu. 2. Select ``Mini Shell'' from the ``File'' menu. 3. You can use the disklabel command to get a listing of the available partitions and their types and sizes. 4. Create the directory mount point(s) with the command: # mkdir path E.g. for the /usr partition type: # mkdir /usr 5. Mount the file systems you wish with the command: # mount device path For example, if you wish to mount a /usr partition from the first SCSI disk sd0, on /usr, you would type: # mount /dev/sd0g /usr 6. Type # fstab force to create a proper /etc/fstab file. 7. Type quit after you have mounted all the file systems. Installation of base files Select the Install menu item from the File menu and install base.tgz, etc.tgz, netbsd.tgz, and any other sets you wish to install at this time. (See the contents section for information about what's in each set.) The Installer will print out the filename of each file as it is in- stalled, and will take quite some time to install everything (the base package alone can take over an hour on a slow hard drive). As is the case with Mkfs, this is not a particularly well-behaved Macin- tosh application and the machine will be completely tied up while the in- stallation takes place. At some point after installing the base set, select the Build Devices op- tion from the File menu if you have not already done so. This will create a bunch of device nodes for you and will create your initial /etc/fstab. The Installer program also has an option to give you a mini-shell. Do not use this unless you are sure know what you are doing. When you are finished installing all of the sets you wish to install, ex- it the Installer by choosing Quit from the File menu. Booting the system Prior to attempting to boot NetBSD/mac68k, please verify that all of the following are true: 1. 32-bit addressing is enabled [1] in the Memory control panel; 2. All forms of virtual memory are disabled (the Memory control panel, RAM Doubler, or other software-based memory enhancement products); and 3. Your system is in B&W mode (1-bit color or grayscale) as shown by the Monitors control panel. You may choose to have the Booter do this for you automatically by selecting the appropriate check box and radio button in the Monitors dialog on the Options menu. It is probably best to boot your machine with all extensions turned off [1]. You can do this by booting into MacOS with the SHIFT key held down. You may have to restart your Macintosh for changes to take effect before proceeding. [1] If your version of the Memory control panel does not have a 32-bit addressing mode radio button, this means that your system is already 32-bit clean and is running in 32-bit addressing mode by default. If the Booter complains that your are not in 32-bit mode, it may be necessary for you to press the ``Use Defaults'' button in the Memory control panel to restore 32-bit addressing. You should probably re- boot after doing so. If you have an older II-class system (includ- ing the II, IIx, IIcx, and SE/30), it is necessary to install Con- nectix's MODE32 to work around ROM issues which prevent you from en- abling 32-bit addressing. Please see the FAQ: http://www.netbsd.org/Ports/mac68k/faq/ for more information. Double-click on the NetBSD/mac68k Booter icon to start the application. Select Booting from the Options menu. Check that all of the items in the resulting dialog look sane - especially the SCSI-ID. If not, correct them to your preference (the SCSI-ID should be the only thing you need to change). When you are satisfied with your choices, try booting NetBSD by selecting Boot Now from the Options menu. If you wish to save your preferences, choose Save Options from the File menu before Booting (your preferences will not be saved if you forget to do this). If the system does not come up, send mail to port-mac68k@netbsd.org de- scribing your software, your hardware, and as complete a description of the problem as you can. If the system does come up, congratulations, you have successfully in- stalled NetBSD 1.5.3. Post installation steps Once you've got the operating system running, there are a few things you need to do in order to bring the system into a properly configured state, with the most important ones described below. 1. Configuring /etc/rc.conf If you or the installation software haven't done any configuration of /etc/rc.conf (sysinst usually will), the system will drop you in- to single user mode on first reboot with the message /etc/rc.conf is not configured. Multiuser boot aborted. and with the root file system (/) mounted read-write. When the sys- tem asks you to choose a shell, simply press RETURN to get to a /bin/sh prompt. If you are asked for a terminal type, respond with vt220 (or whatever is appropriate for your terminal type) and press RETURN. You may need to type one of the following commands to get your delete key to work properly, depending on your keyboard: # stty erase '^h' # stty erase '^?' At this point, you need to configure at least one file in the /etc directory. You will need to mount your root filesystem read/write with: # /sbin/mount -u -w / Change to the /etc directory and take a look at the /etc/rc.conf file. Modify it to your tastes, making sure that you set rc_configured=YES so that your changes will be enabled and a multi- user boot can proceed. Default values for the various programs can be found in /etc/defaults/rc.conf, where some in-line documentation may be found. More complete documentation can be found in rc.conf(5). If your /usr directory is on a separate partition and you do not know how to use ed, you will have to mount your /usr partition to gain access to ex or vi. Do the following: # mount /usr # export TERM=vt220 If you have /var on a separate partition, you need to repeat that step for it. After that, you can edit /etc/rc.conf with vi(1). When you have finished, type exit at the prompt to leave the single-user shell and continue with the multi-user boot. Other values that need to be set in /etc/rc.conf for a networked en- vironment are hostname and possibly defaultroute, furthermore add an ifconfig_int for your network interface, along the lines of ifconfig_de0="inet 123.45.67.89 netmask 255.255.255.0" or, if you have myname.my.dom in /etc/hosts: ifconfig_de0="inet myname.my.dom netmask 255.255.255.0" To enable proper hostname resolution, you will also want to add an /etc/resolv.conf file or (if you are feeling a little more adventur- ous) run named(8). See resolv.conf(5) or named(8) for more informa- tion. Other files in /etc that may require modification or setting up in- clude /etc/mailer.conf, /etc/nsswitch.conf, and /etc/wscons.conf. 2. Logging in After reboot, you can log in as root at the login prompt. Unless you've set a password in sysinst, there is no initial password. If you're using the machine in a networked environment, you should cre- ate an account for yourself (see below) and protect it and the ``root'' account with good passwords. Unless you have connected an unusual terminal device as the console you can just press RETURN when it prompts for Terminal type? [...]. 3. Adding accounts Use the useradd(8) command to add accounts to your system, do not edit /etc/passwd directly. See useradd(8) for more information on how to add a new user to the system. 4. The X Window System If you have installed the X Window System, look at the files in /usr/X11R6/lib/X11/doc for information. Don't forget to add /usr/X11R6/bin to your path in your shell's dot file so that you have access to the X binaries. 5. Installing third party packages If you wish to install any of the software freely available for UNIX-like systems you are strongly advised to first check the NetBSD package system. This automatically handles any changes necessary to make the software run on NetBSD, retrieval and installation of any other packages on which the software may depend, and simplifies in- stallation (and deinstallation), both from source and precompiled binaries. - More information on the package system is at http://www.netbsd.org/Documentation/software/packages.html - A browsable listing of available packages is at ftp://ftp.netbsd.org/pub/NetBSD/packages/pkgsrc/README.html - Precompiled binaries can be found at ftp://ftp.netbsd.org/pub/NetBSD/packages, usually in the 1.5.3/mac68k/All subdir. You can install them with the following commands: # export PKG_PATH=\ ftp://ftp.netbsd.org/pub/NetBSD/packages/1.5.3/mac68k/All\;\ ftp://ftp.netbsd.org/pub/NetBSD/packages/1.5/mac68k/All # pkg_add -v tcsh # pkg_add -v cvs # pkg_add -v apache # pkg_add -v perl ... The above commands will install the tcsh shell, the CVS source code management system, the Apache web server and the perl pro- gramming language as well as all the packages they depend on. - Package sources for compiling packages on your own can be ob- tained by retrieving the file ftp://ftp.netbsd.org/pub/NetBSD/NetBSD- current/tar_files/pkgsrc.tar.gz They are typically extracted into /usr/pkgsrc (though other lo- cations work fine), with the commands: # mkdir /usr/pkgsrc # ( cd /usr/pkgsrc ; tar -zxpf - ) < pkgsrc.tar.gz After extracting, then see the README file in the extraction di- rectory (e.g. /usr/pkgsrc/README) for more information. 6. Misc - Edit /etc/mail/aliases to forward root mail to the right place. Don't forget to run newaliases(1) afterwards. - The /etc/mail/sendmail.cf file will almost definitely need to be adjusted; files aiding in this can be found in /usr/share/sendmail. See the README file there for more infor- mation. - Edit /etc/rc.local to run any local daemons you use. - Many of the /etc files are documented in section 5 of the manu- al; so just invoking # man 5 filename is likely to give you more information on these files. Upgrading a previously-installed NetBSD System The upgrade to NetBSD 1.5.3 is a binary upgrade; it can be quite diffi- cult to advance to a later version by recompiling from source due primar- ily to interdependencies in the various components. No automated upgrade procedure exists for upgrading to release 1.5.3 for the NetBSD/mac68k architecture. The current procedure is essentially to perform a new install from scratch. It is hoped that there will be a good upgrade procedure for future releases. Please feel free to volunteer to help replace these installation tools. The following steps outline the current upgrade procedure. These steps should help ease the upgrade process. Please read these instructions carefully and completely before proceeding. 1. Since upgrading involves replacing the kernel and most of the system binaries, it has the potential to cause data loss. You are strongly advised to back up any important data on your disk, whether on the NetBSD partition or on another operating system's partition, before beginning the upgrade process. Although the upgrade should not dam- age your file system(s) in any way, you never know what may happen. 2. Download the distribution sets you want from the mac68k/binary/sets subdirectory of the NetBSD 1.5.3 distribution. You will need the base set and the kernel at a minimum. Be sure to download the files in binary mode. If you will be upgrading from within NetBSD, make sure that you place the distribution sets on a file system you will be able to reach from single-user mode. 3. Install the 1.5.3 kernel. You may either use the Installer utility (included in the installation/misc subdirectory) or install from within NetBSD (the latter is recommended for speed reasons). If you choose the former, proceed as you normally would. If you choose to install from within NetBSD, then boot (or shutdown) into single-user mode and do the following: # cd / # pax -zrvpe -f /path/to/kern.tgz There is no need to backup your old kernel explicitly since it will be incapable of running many of the newer binaries you are about to install. (Unless, of course, you have a backup copy of your older binaries and want to revert to them for some reason.) However, you might want to keep a backup if you are upgrading from within NetBSD just in case the newer kernel has trouble booting your machine. 4. If you are installing using the Installer, skip to step 5. Other- wise, reboot into NetBSD in single-user mode. Run fsck -f and then mount all local partitions read/write. Usually mount -a -t nonfs should do the trick, but if you have several partitions on the same disk, take note of the fact that a change in partition numbering may have moved a few of your partitions around. You can do a disklabel sdX (where X is a drive on which you have NetBSD partitions) to see how the partitions are currently layed out. It is likely that a par- tition has shifted into the sdXd or sdXe slots, slots that often were not available under previous releases of NetBSD. If this is the case, you will need to manually mount your root partition (/) via mount -w / and edit your /etc/fstab file to reflect the new par- tition layout. Unless you are familiar with ex(1) or ed(1). the easiest way to fix your /etc/fstab file is probably to simply do a cat > /etc/fstab and type in the corrected file in its entirety. 5. Install the distribution sets. Keep in mind that the NetBSD 1.5.3 distribution takes up a considerably larger amount of disk space than did the 1.3 family of distributions. If you are using the In- staller, proceed normally (remember that you will need to mount non- root partitions by hand using the MiniShell before installing). If you are installing from within NetBSD, do the following: # cd / # pax -zrvpe -f /path/to/base.tgz Keep in mind that there is no going back once you have installed the base set short of a complete re-install of an earlier distribution. Continue with the appropriate command line for each of the other sets you wish to install except for the etc set. If you are in the Installer, open up the Minishell and do the following: cd /tmp exit Ignore the warning message this will cause. Now, use the Installer to install the etc set (it will install into /tmp instead of the /etc directory). If you are in NetBSD, do the following instead: # cd /tmp # pax -zrvpe -f /path/to/etc.tgz 6. If you are in the Installer, quit it and boot into NetBSD in single- user mode. From there, cd to the /tmp/etc directory and compare each file there with your old files in /etc. You will probably want to replace some of your system configuration files, or incorporate some of the changes in the new versions into yours. You should take note of the following when upgrading to the NetBSD 1.5.3 etc.tgz set: - Several of the options given to many of the file systems have changed, and some of the file systems have changed names. Note: It is imperative that you change any instances of ufs /etc/fstab to ffs. To find out more about different file system options, read the man page for the associated mount command (e.g. mount_mfs(8) for MFS file systems; note: FFS type file systems are documented in the mount(8) man page). If you have not already done so, you may also need to correct /etc/fstab for a shift in the partition numbering scheme. See step 4 above for more details. - You will also probably want to upgrade your device nodes at this time as well. Make sure you have installed the latest MAKEDEV script (it should be included in the etc set) and perform the following commands: # cd /dev # sh MAKEDEV all 7. Run fsck -f to make sure that your file system is still consistent. If fsck reports any errors, fix them by answering `y' to its sug- gested solutions Note: If there are a large number of errors, you may wish to stop and run fsck -fy to automatically answer yes instead. 8. Exit from single-user mode and it should continue to boot into mul- ti-user mode. At this point you have successfully upgraded to NetBSD 1.5.3. Compatibility Issues With Previous NetBSD Releases Users upgrading from previous versions of NetBSD may wish to bear the following problems and compatibility issues in mind when upgrading to NetBSD 1.5.3. General issues - /etc/rc modified to use /etc/rc.d/* Prior to NetBSD 1.5, /etc/rc was a traditional BSD style monolithic file; each discrete program or substem from /etc/rc and /etc/netstart has been moved into separate scripts in /etc/rc.d/. At system startup, /etc/rc uses rcorder(8) to build a dependency list of the files in /etc/rc.d and then executes each script in turn with an argument of `start'. Many rc.d scripts won't start unless the ap- propriate rc.conf(5) entry in /etc/rc.conf is set to `YES.' At system shutdown, /etc/rc.shutdown uses rcorder(8) to build a de- pendency list of the files in /etc/rc.d that have a ``KEYWORD: shutdown'' line, reverses the resulting list, and then executes each script in turn with an argument of `stop'. The following scripts support a specific shutdown method: cron, inetd, local, and xdm. Local and third-party scripts may be installed into /etc/rc.d as nec- essary. Refer to the other scripts in that directory and rc(8) for more information on implementing rc.d scripts. Issues affecting an upgrade from NetBSD 1.4 or prior - named(8) leaks version information Previous releases of NetBSD disabled a feature of named(8) where the version number of the server could be determined by remote clients. This feature has not been disabled in NetBSD 1.5, because there is a named.conf(5) option to change the version string: option { version "newstring"; }; - sysctl(8) pathname changed sysctl(8) is moved from /usr/sbin/sysctl to /sbin/sysctl. If you have hardcoded references to the full pathname (in shell scripts, for example) please be sure to update those. - sendmail(8) configuration file pathname changed Due to sendmail(8) upgrade from 8.9.x to 8.10.x, /etc/sendmail.cf is moved to /etc/mail/sendmail.cf. Also, the default sendmail.cf(5) refers different pathnames than before. For example, /etc/aliases is now located at /etc/mail/aliases, /etc/sendmail.cw is now called /etc/mail/local-host-names, and so forth. If you have customized sendmail.cf(5) and friends, you will need to move the files to the new locations. See /usr/share/sendmail/README for more information. Using online NetBSD documentation Documentation is available if you first install the manual distribution set. Traditionally, the ``man pages'' (documentation) are denoted by `name(section)'. Some examples of this are - intro(1), - man(1), - apropros(1), - passwd(1), and - passwd(5). The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8. The man command is used to view the documentation on a topic, and is started by entering man [section] topic. The brackets [] around the sec- tion should not be entered, but rather indicate that the section is op- tional. If you don't ask for a particular section, the topic with the lowest numbered section name will be displayed. For instance, after log- ging in, enter # man passwd to read the documentation for passwd(1). To view the documentation for passwd(5), enter # man 5 passwd instead. If you are unsure of what man page you are looking for, enter apropos subject-word where subject-word is your topic of interest; a list of possibly related man pages will be displayed. Administrivia If you've got something to say, do so! We'd like your input. There are various mailing lists available via the mailing list server at majordomo@netbsd.org. To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instruc- tions. There are various mailing lists set up to deal with comments and ques- tions about this release. Please send comments to: netbsd- comments@netbsd.org. To report bugs, use the send-pr(1) command shipped with NetBSD, and fill in as much information about the problem as you can. Good bug reports in- clude lots of details. Additionally, bug reports can be sent by mail to: netbsd-bugs@netbsd.org. Use of send-pr(1) is encouraged, however, because bugs reported with it are entered into the NetBSD bugs database, and thus can't slip through the cracks. There are also port-specific mailing lists, to discuss aspects of each port of NetBSD. Use majordomo to find their addresses, or visit http://www.netbsd.org/MailingLists/. If you're interested in doing a serious amount of work on a specific port, you probably should contact the `owner' of that port (listed be- low). If you'd like to help with this effort, and have an idea as to how you could be useful, send us mail or subscribe to: netbsd-help@netbsd.org. As a favor, please avoid mailing huge documents or files to these mailing lists. Instead, put the material you would have sent up for FTP or WWW somewhere, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it. Thanks go to - The former members of UCB's Computer Systems Research Group, includ- ing (but not limited to): Keith Bostic Ralph Campbell Mike Karels Marshall Kirk McKusick for their ongoing work on BSD systems, support, and encouragement. - Also, our thanks go to: Mike Hibler Rick Macklem Jan-Simon Pendry Chris Torek for answering lots of questions, fixing bugs, and doing the various work they've done. - UC Berkeley's Experimental Computing Facility provided a home for sun-lamp in the past, people to look after it, and a sense of humor. Rob Robertson, too, has added his unique sense of humor to things, and for a long time provided the primary FTP site for NetBSD. - Vixie Enterprises for hosting the NetBSD FTP, SUP, and WWW servers. - Redback Networks, Inc. for hosting the NetBSD mail and GNATS server. - The Helsinki University of Technology in Finland for hosting the NetBSD CVS server. - The Internet Research Institute in Japan for hosting the server which runs the CVSweb interface to the NetBSD source tree. - The many organisations that provide NetBSD mirror sites. - Without CVS, this project would be impossible to manage, so our hats go off to Brian Berliner, Jeff Polk, and the various other people who've had a hand in making CVS a useful tool. - Dave Burgess burgess@cynjut.infonet.net has been maintaining the 386BSD/NetBSD/FreeBSD FAQ for quite some time, and deserves to be recognized for it. - The following individuals and organizations (each in alphabetical or- der) have made donations or loans of hardware and/or money, to sup- port NetBSD development, and deserve credit for it: Steve Allen Jason Birnschein Mason Loring Bliss Jason Brazile Mark Brinicombe David Brownlee Simon Burge Dave Burgess Ralph Campbell Brian Carlstrom James Chacon Bill Coldwell Charles Conn Tom Coulter Charles D. Cranor Christopher G. Demetriou Scott Ellis Hubert Feyrer Castor Fu Greg Gingerich William Gnadt Michael Graff Guenther Grau Ross Harvey Charles M. Hannum Michael L. Hitch Kenneth Alan Hornstein Jordan K. Hubbard Soren Jorvang Scott Kaplan Noah M. Keiserman Harald Koerfgen John Kohl Chris Legrow Ted Lemon Norman R. McBride Neil J. McRae Perry E. Metzger Toru Nishimura Herb Peyerl Mike Price Dave Rand Michael Richardson Heiko W. Rupp Brad Salai Chuck Silvers Thor Lancelot Simon Bill Sommerfeld Paul Southworth Eric and Rosemary Spahr Ted Spradley Kimmo Suominen Jason R. Thorpe Steve Wadlow Krister Walfridsson Jim Wise Reinoud Zandijk Christos Zoulas AboveNet Communications, Inc. Advanced System Products, Inc. Avalon Computer Systems Bay Area Internet Solutions Brains Corporation, Japan Canada Connect Corporation Co-operative Research Centre for Enterprise Distributed Systems Technology Demon Internet, UK Digital Equipment Corporation Distributed Processing Technology Easynet, UK Free Hardware Foundation Innovation Development Enterprises of America Internet Software Consortium MS Macro System GmbH, Germany Numerical Aerospace Simulation Facility, NASA Ames Research Center Piermont Information Systems Inc. Precedence Technologies Ltd Salient Systems Inc. VMC Harald Frank, Germany Warped Communications, Inc. Whitecross Database Systems Ltd. (If you're not on that list and should be, tell us! We probably were not able to get in touch with you, to verify that you wanted to be listed.) - Finally, we thank all of the people who've put sweat and tears into developing NetBSD since its inception in January, 1993. (Obviously, there are a lot more people who deserve thanks here. If you're one of them, and would like to mentioned, tell us!) We are... (in alphabetical order) The NetBSD core group: Jun-ichiro itojun Hagino itojun@netbsd.org Frank van der Linden fvdl@netbsd.org Luke Mewburn lukem@netbsd.org Christos Zoulas christos@netbsd.org The portmasters (and their ports): Mark Brinicombe mark@netbsd.org arm32 Simon Burge simonb@netbsd.org pmax Jeremy Cooper jeremy@netbsd.org sun3x Matt Fredette fredette@netbsd.org sun2 Ross Harvey ross@netbsd.org alpha Jun-ichiro itojun Hagino itojun@netbsd.org sh3 Ben Harris bjh21@netbsd.org arm26 Eduardo Horvath eeh@netbsd.org sparc64 Darrin Jewell dbj@netbsd.org next68k Soren Jorvang soren@netbsd.org cobalt Soren Jorvang soren@netbsd.org sgimips Wayne Knowles wdk@netbsd.org mipsco Paul Kranenburg pk@netbsd.org sparc Anders Magnusson ragge@netbsd.org vax Minoura Makoto minoura@netbsd.org x68k Phil Nelson phil@netbsd.org pc532 Tohru Nishimura nisimura@netbsd.org luna68k NONAKA Kimihiro nonaka@netbsd.org prep Scott Reynolds scottr@netbsd.org mac68k Kazuki Sakamoto sakamoto@netbsd.org bebox Noriyuki Soda soda@netbsd.org arc Wolfgang Solfrank ws@netbsd.org ofppc Ignatios Souvatzis is@netbsd.org amiga Jonathan Stone jonathan@netbsd.org pmax Shin Takemura takemura@netbsd.org hpcmips Jason Thorpe thorpej@netbsd.org alpha Jason Thorpe thorpej@netbsd.org hp300 Tsubai Masanari tsubai@netbsd.org macppc Tsubai Masanari tsubai@netbsd.org newsmips Izumi Tsutsui tsutsui@netbsd.org news68k Frank van der Linden fvdl@netbsd.org i386 Leo Weppelman leo@netbsd.org atari Nathan Williams nathanw@netbsd.org sun3 Steve Woodford scw@netbsd.org mvme68k The NetBSD 1.5.3 Release Engineering team: Chris G. Demetriou cgd@netbsd.org Havard Eidnes he@netbsd.org Ted Lemon mellon@netbsd.org Perry Metzger perry@netbsd.org Curt Sampson cjs@netbsd.org Jason Thorpe thorpej@netbsd.org Todd Vierling tv@netbsd.org Developers and other contributors: Nathan Ahlstrom nra@NetBSD.org Steve Allen wormey@netbsd.org Julian Assange proff@netbsd.org Lennart Augustsson augustss@netbsd.org Christoph Badura bad@netbsd.org Bang Jun-Young junyoung@netbsd.org Dieter Baron dillo@netbsd.org Robert V. Baron rvb@netbsd.org Jason Beegan jtb@netbsd.org Erik Berls cyber@netbsd.org John Birrell jb@netbsd.org Mason Loring Bliss mason@netbsd.org Rafal Boni rafal@netbsd.org Manuel Bouyer bouyer@netbsd.org John Brezak brezak@netbsd.org Allen Briggs briggs@netbsd.org Aaron Brown abrown@netbsd.org Andrew Brown atatat@netbsd.org David Brownlee abs@netbsd.org Frederick Bruckman fredb@netbsd.org Jon Buller jonb@netbsd.org Dave Burgess burgess@cynjut.infonet.net Robert Byrnes byrnes@netbsd.org D'Arcy J.M. Cain darcy@netbsd.org Dave Carrel carrel@netbsd.org James Chacon jmc@netbsd.org Bill Coldwell billc@netbsd.org Julian Coleman jdc@netbsd.org Chuck Cranor chuck@netbsd.org Alistair Crooks agc@netbsd.org Aidan Cully aidan@netbsd.org Johan Danielsson joda@netbsd.org Matt DeBergalis deberg@netbsd.org Rob Deker deker@netbsd.org Chris G. Demetriou cgd@netbsd.org Tracy Di Marco White gendalia@netbsd.org Jaromir Dolecek jdolecek@netbsd.org Andy Doran ad@netbsd.org Roland Dowdeswell elric@netbsd.org Emmanuel Dreyfus manu@netbsd.org Matthias Drochner drochner@netbsd.org Jun Ebihara jun@netbsd.org Havard Eidnes he@netbsd.org Stoned Elipot seb@netbsd.org Enami Tsugutomo enami@netbsd.org Bernd Ernesti veego@netbsd.org Erik Fair fair@netbsd.org Hubert Feyrer hubertf@netbsd.org Jason R. Fink jrf@netbsd.org Thorsten Frueauf frueauf@netbsd.org Castor Fu castor@netbsd.org Ichiro Fukuhara ichiro@netbsd.org Brian R. Gaeke brg@dgate.org Thomas Gerner thomas@netbsd.org Simon J. Gerraty sjg@netbsd.org Justin Gibbs gibbs@netbsd.org Adam Glass glass@netbsd.org Michael Graff explorer@netbsd.org Brad Grantham grantham@tenon.com Brian C. Grayson bgrayson@netbsd.org Matthew Green mrg@netbsd.org Juergen Hannken-Illjes hannken@netbsd.org Charles M. Hannum mycroft@netbsd.org Eric Haszlakiewicz erh@netbsd.org John Hawkinson jhawk@netbsd.org HAYAKAWA Koichi haya@netbsd.org Rene Hexel rh@netbsd.org Michael L. Hitch mhitch@netbsd.org Christian E. Hopps chopps@netbsd.org Ken Hornstein kenh@netbsd.org Marc Horowitz marc@netbsd.org Nick Hudson skrll@netbsd.org Martin Husemann martin@netbsd.org Dean Huxley dean@netbsd.org Bernardo Innocenti bernie@netbsd.org Tetsuya Isaki isaki@netbsd.org ITOH Yasufumi itohy@netbsd.org IWAMOTO Toshihiro toshii@netbsd.org Matthew Jacob mjacob@netbsd.org Lonhyn T. Jasinskyj lonhyn@netbsd.org Chris Jones cjones@netbsd.org Takahiro Kambe taca@netbsd.org Antti Kantee pooka@netbsd.org Masanori Kanaoka kanaoka@netbsd.org KAWAMOTO Yosihisa kawamoto@netbsd.org Mario Kemper magick@netbsd.org Lawrence Kesteloot kesteloo@cs.unc.edu Thomas Klausner wiz@netbsd.org Klaus Klein kleink@netbsd.org Wayne Knowles wdk@netbsd.org John Kohl jtk@netbsd.org Martti Kuparinen martti@netbsd.org Kevin Lahey kml@netbsd.org Johnny C. Lam jlam@netbsd.org Martin J. Laubach mjl@netbsd.org Ted Lemon mellon@netbsd.org Joel Lindholm joel@netbsd.org Mike Long mikel@netbsd.org Warner Losh imp@netbsd.org Tomasz Luchowski zuntum@netbsd.org Federico Lupi federico@netbsd.org Brett Lymn blymn@netbsd.org Paul Mackerras paulus@netbsd.org MAEKAWA Masahide gehenna@netbsd.org David Maxwell david@netbsd.org Dan McMahill dmcmahill@netbsd.org Gregory McGarry gmcgarry@netbsd.org Jared D. McNeill jmcneill@netbsd.org Neil J. McRae neil@netbsd.org Perry Metzger perry@netbsd.org der Mouse mouse@netbsd.org Joseph Myers jsm@netbsd.org Ken Nakata kenn@netbsd.org Bob Nestor rnestor@netbsd.org NISHIMURA Takeshi nsmrtks@netbsd.org NONAKA Kimihiro nonaka@netbsd.org Jesse Off joff@netbsd.org Tatoku Ogaito tacha@netbsd.org Masaru Oki oki@netbsd.org Atsushi Onoe onoe@netbsd.org Greg Oster oster@netbsd.org Herb Peyerl hpeyerl@netbsd.org Matthias Pfaller matthias@netbsd.org Chris Pinnock cjep@netbsd.org Dante Profeta dante@netbsd.org Chris Provenzano proven@netbsd.org Michael Rauch mrauch@netbsd.org Waldi Ravens waldi@moacs.indiv.nl.net Darren Reed darrenr@netbsd.org Michael Richardson mcr@netbsd.org Tim Rightnour garbled@netbsd.org Gordon Ross gwr@netbsd.org Heiko W. Rupp hwr@netbsd.org SAITOH Masanobu msaitoh@netbsd.org Curt Sampson cjs@netbsd.org Wilfredo Sanchez wsanchez@netbsd.org Ty Sarna tsarna@netbsd.org SATO Kazumi sato@netbsd.org Matthias Scheler tron@netbsd.org Karl Schilke (rAT) rat@netbsd.org Konrad Schroder perseant@netbsd.org Reed Shadgett dent@netbsd.org Tim Shepard shep@netbsd.org Takao Shinohara shin@netbsd.org Takuya SHIOZAKI tshiozak@netbsd.org Chuck Silvers chs@netbsd.org Thor Lancelot Simon tls@netbsd.org Jeff Smith jeffs@netbsd.org SOMEYA Yoshihiko someya@netbsd.org Bill Sommerfeld sommerfeld@netbsd.org Bill Squier groo@netbsd.org Bill Studenmund wrstuden@netbsd.org Kevin Sullivan sullivan@netbsd.org SUNAGAWA Keiki kei@netbsd.org Kimmo Suominen kim@netbsd.org TAMURA Kent kent@netbsd.org Shin'ichiro TAYA taya@netbsd.org Matt Thomas matt@netbsd.org Christoph Toshok toshok@netbsd.org UCHIYAMA Yasushi uch@netbsd.org Shuichiro URATA ur@netbsd.org Todd Vierling tv@netbsd.org Aymeric Vincent aymeric@netbsd.org Paul Vixie vixie@netbsd.org Krister Walfridsson kristerw@netbsd.org Lex Wennmacher wennmach@netbsd.org Assar Westerlund assar@netbsd.org Todd Whitesel toddpw@netbsd.org Rob Windsor windsor@netbsd.org Dan Winship danw@netbsd.org Jim Wise jwise@netbsd.org Michael Wolfson mbw@netbsd.org Colin Wood ender@netbsd.org YAMAMOTO Takashi yamt@netbsd.org Yuji Yamano yyamano@netbsd.org Reinoud Zandijk reinoud@netbsd.org Legal Mumbo-Jumbo All product names mentioned herein are trademarks or registered trade- marks of their respective owners. The following notices are required to satisfy the license terms of the software that we have mentioned in this document: This product includes software developed by the University of California, Berkeley and its contributors. This product includes software developed by The NetBSD Foundation, Inc. This product includes software developed by the NetBSD Foundation, Inc. and its contributors. This product in- cludes software developed by the Computer Systems Engineering Group at Lawrence Berkeley Laboratory. This product includes software developed by Adam Glass and Charles Hannum. This product includes software devel- oped by Adam Glass and Charles M. Hannum. This product includes software developed by Adam Glass. This product includes software developed by Al- istair G. Crooks. This product includes software developed by Amancio Hasty and Roger Hardiman. This product includes software developed by Berkeley Software Design, Inc. This product includes software developed by Bill Paul. This product includes software developed by Charles D. Cranor and Washington University. This product includes software devel- oped by Charles D. Cranor. This product includes software developed by Charles Hannum, by the University of Vermont and State Agricultural Col- lege and Garrett A. Wollman, by William F. Jolitz, and by the University of California, Berkeley, Lawrence Berkeley Laboratory, and its contribu- tors. This product includes software developed by Charles Hannum. This product includes software developed by Charles M. Hannum. This product includes software developed by Chris Provenzano. This product includes software developed by Christian E. Hopps. This product includes software developed by Christopher G. Demetriou for the NetBSD Project. This prod- uct includes software developed by Christopher G. Demetriou. This prod- uct includes software developed by Christos Zoulas. This product in- cludes software developed by David Jones and Gordon Ross. This product includes software developed by Dean Huxley. This product includes soft- ware developed by Eric S. Hvozda. This product includes software devel- oped by Ezra Story. This product includes software developed by Gardner Buchanan. This product includes software developed by Gordon Ross. This product includes software developed by Gordon W. Ross and Leo Weppelman. This product includes software developed by Gordon W. Ross. This product includes software developed by Hauke Fath. This product includes soft- ware developed by HAYAKAWA Koichi. This product includes software devel- oped by Hellmuth Michaelis and Joerg Wunsch. This product includes soft- ware developed by Herb Peyerl. This product includes software developed by Holger Veit and Brian Moore for use with "386BSD" and similar operat- ing systems. This product includes software developed by Hubert Feyrer for the NetBSD Project. This product includes software developed by Iain Hibbert. This product includes software developed by Ian W. Dall. This product includes software developed by Ignatios Souvatzis for the NetBSD Project. This product includes software developed by Jason R. Thorpe for And Communications, http://www.and.com/. This product includes software developed by Joachim Koenig-Baltes. This product includes software de- veloped by Jochen Pohl for The NetBSD Project. This product includes software developed by John Polstra. This product includes software de- veloped by Jonathan Stone and Jason R. Thorpe for the NetBSD Project. This product includes software developed by Jonathan Stone for the NetBSD Project. This product includes software developed by Jonathan Stone. This product includes software developed by Julian Highfield. This prod- uct includes software developed by Kenneth Stailey. This product in- cludes software developed by Leo Weppelman. This product includes soft- ware developed by Lloyd Parkes. This product includes software developed by Manuel Bouyer. This product includes software developed by Marc Horowitz. This product includes software developed by Mark Brinicombe. This product includes software developed by Mark Tinguely and Jim Lowe. This product includes software developed by Markus Wild. This product includes software developed by Martin Husemann and Wolfgang Solfrank. This product includes software developed by Mats O Jansson and Charles D. Cranor. This product includes software developed by Mats O Jansson. This product includes software developed by Matthias Pfaller. This prod- uct includes software developed by Michael L. Hitch. This product in- cludes software developed by Niels Provos. This product includes soft- ware developed by Paul Kranenburg. This product includes software devel- oped by Paul Mackerras. This product includes software developed by Pe- ter Galbavy. This product includes software developed by Philip A. Nel- son. This product includes software developed by Rodney W. Grimes. This product includes software developed by Roland C. Dowdeswell. This prod- uct includes software developed by Rolf Grossmann. This product includes software developed by Scott Bartram. This product includes software de- veloped by SigmaSoft, Th. Lockert. This product includes software devel- oped by Tatoku Ogaito for the NetBSD Project. This product includes software developed by Terrence R. Lambert. This product includes soft- ware developed by Theo de Raadt and John Brezak. This product includes software developed by Theo de Raadt. This product includes software de- veloped by Tohru Nishimura for the NetBSD Project. This product includes software developed by TooLs GmbH. This product includes software devel- oped by Winning Strategies, Inc. This product includes software devel- oped by Zembu Labs, Inc. This product includes software developed by the Center for Software Science at the University of Utah. This product in- cludes software developed by the Computer Systems Laboratory at the Uni- versity of Utah. This product includes software developed by the Univer- sity of Calgary Department of Computer Science and its contributors. This product includes software developed by the University of Vermont and State Agricultural College and Garrett A. Wollman. This product includes software developed for the FreeBSD project. This product includes soft- ware developed for the Internet Software Consortium by Ted Lemon. This product includes software developed for the NetBSD Project by Frank van der Linden. This product includes software developed for the NetBSD Pro- ject by Jason R. Thorpe. This product includes software developed for the NetBSD Project by John M. Vinopal. This product includes software developed for the NetBSD Project by Matthias Drochner. This product in- cludes software developed for the NetBSD Project by Matthieu Herrb. This product includes software developed for the NetBSD Project by Perry E. Metzger. This product includes software developed for the NetBSD Project by Piermont Information Systems Inc. This product includes software de- veloped for the NetBSD Project by Ted Lemon. This product includes soft- ware developed by LAN Media Corporation and its contributors. This prod- uct includes software developed by Michael Graff for the NetBSD Project. This product includes software developed by Niklas Hallqvist, C Stone and Job de Haas. This product includes software developed by Eric Young (eay@mincom.oz.au). This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/). This product includes software developed by the University of Oregon. This product includes software developed by the University of Southern California and/or Information Sciences Institute. This product includes software developed by Internet Initiative Japan Inc. This product in- cludes software developed by Reinoud Zandijk. This product includes software developed by the Alice Group. This product includes software developed by Allen Briggs. This product includes software developed by Bradley A. Grantham. This product includes software developed by Takashi Hamada. This product includes software developed by Scott Reynolds. This product includes software developed by John P. Wittkoski. This product includes software developed by Colin Wood. The End Contributions The following people have made contributions of various sorts specifical- ly for the Macintosh port (in alphabetical order): o All of the users who have supplied us with good bug reports and moral support. o The Alice Group (Allen K. Briggs, Chris P. Caputo, Michael L. Finch, Bradley A. Grantham, and Lawrence A. Kesteloot), without whom there would be no NetBSD port for the Macintosh. o Steven R. Allen for keeping our snapshot distributions up-to-date. o Stephen C. Brown for maintaining the Installer application. o Denton Gentry and Yanagisawa Takeshi for their work on the SONIC Eth- ernet driver. o Paul Goyette, Taras Ivanenko, Ken Nakata, and Michael R. Zucca for invaluable work towards supporting color X. o Takashi Hamada and John Wittkoski beating the direct ADB hardware driver into submission. o David Huang for getting MACE Ethernet and basic DMA working on the AV Macs. o Scott Jann for acquiring a IIx and a IIci, used for building and testing release sets. o Scott Kaplan for lending his IIci and Kensington Turbo Mouse for IIci/IIsi banked memory and internal video as well as non-Apple ADB devices. o Noah M. Kieserman for lending a PowerBook 520C for tracking down sev- eral bugs on that platform. o Markus Krummenacker for monetary donations. o Glan Lalonde for an invaluable IIci page table dump. o Bob Nestor for (unofficially) maintaining the Mkfs utility, and pro- viding a lot of useful information about the ROM vectors used by dif- ferent systems. o Brad Parker for serial and Ethernet drivers/improvements. o Brian R. Gaeke and Nigel Pearson for tweaking and polishing the Boot- er application. o Scott Redman for lending Brad Grantham a PowerBook 160. o Craig Ruff for assembling an '030 pmove ttx instruction. o Brad Salai for lending an Ethernet card to help resolve interrupt conflicts. o Larry Samuels for monetary donations. o Peter Siebold for lending his IIvx in support of ADB and IIvx inter- nal video. o Glen Stewart for lending a Carrera040 accelerator which, while still unsupported, helped to track down memory management bugs for '030-based machines. o Bill Studenmund for providing a stable front end to the machine- in- dependent serial driver. o Schuyler Stultz for the loan of his Macintosh II when we desperately needed another machine on which to compile and test during the '93 Xmas vacation. o Tenon Intersystems for monetary donations, MachTen, and Brad's access to several machines and documentation after hours. o Virginia Tech English Department for loan of a IIci w/ NuBus video and 32 MB of RAM - the first IIci to run NetBSD/mac68k. o Colin Wood for maintaining a host of NetBSD/mac68k documentation, in- cluding the FAQ, Meta-FAQ, and OS Info documents. NetBSD September 10, 2001 34