The archive XF68_NetBSD-1.3-Atari.tar.gz contains new X servers for NetBSD
Atari based on XFree 3.2. This servers run only under NetBSD 1.3.

Differences to Xdaniver:
	- Serial mouse support
	- Build in screen saver
	- Key bell

The archive contains 3 servers:
	XF68_FBDev			for Falcon/TT
	XF68_SVGA			for Hades with et4000/w32
	XF68_W32			for Hades with et4000/w32

In the directory usr/X11R6/bin is a link called X which points to the
server to use. Default is X -> XF68_FBDev. If you have a Hades change
this link pointing to the server you like to use.

The XFree servers are configured using the file usr/X11R6/lib/X11/XF86Config.
The default file in this archive is this for the FBDev server. At a Hades
copy one of the other samples (XF86Config.SVGA_sample or
XF86Config.W32_sample) to XF86Config.

The manuals an other docs are those from XFree86. There is currently no
special documentation on XFree68 availabel, but most of this manuals
should be ok for the XF68 servers.

Special notes:
The default keyboard mapping is (should be) the one needed for a US
keyboard.  For german users there is a xmodmap.ge, which can be found in
usr/X11R6/lib/X11/etc.  Load this map with xmodmap to get a proper
mapping for german keyboards. For other languages I have no mapping,
but if one can send one to me, I will put it to the next release of this
archive.

At all XF86Config Alt is mapped to Mode_switch. This is needed to get
the german keyboard work properly. If you dislike this unkomment the
Line 'LeftAlt     ModeShift'.

The FBDev server uses view devices like the old Xdaniver. To use X you
must have at least one more view as ite configured at our kernel config
file. At TT-high the switch -flipPixels is not needed anymore.

TT low does not work at a TT (it only works at a Falcon). 

The SVGA and W32 server uses the grf device. Default is /dev/grf0. To use
another device one can use the switch -grfdev <device>.

At the FBDev server zoom does not work (disabled). This is due to the
lack of virtual resolutions in the kernel drivers.

At all servers switching to the console while the server is running is
not supported.

If your X installation uses compressed fonts uncompress all fonts befor
runing any of the X servers.


Thomas	(thomas@murmel.camelot.de)