INSTALL(8) NetBSD System Manager's Manual INSTALL(8) NAME INSTALL - Installation procedure for NetBSD/hp300 DESCRIPTION About this Document This document describes the installation procedure for NetBSD 1.4.2 on the hp300 platform. It is available in four different formats titled INSTALL.ext, where ext is one of .ps, .html, .more, or .txt. .ps PostScript. .html Standard internet HTML. .more The enhanced text format used on Unix-like systems by the more(1) and less(1) pager utility programs. This is the format in which the on-line man pages are generally pre- sented. .txt Plain old ASCII. You are reading the ASCII version. What is NetBSD? The NetBSD Operating System is a fully functional Open Source UN*X-like operating system derived from the Berkeley Networking Release 2 (Net/2), 4.4BSD-Lite, and 4.4BSD-Lite2 sources. NetBSD runs on twenty different system architectures featuring eight distinct families of CPUs, and is being ported to more. The NetBSD 1.4.2 release contains complete binary releases for fifteen different machine types. (The remaining ones are not fully supported at this time and are thus not part of the binary distri- bution. For information on them, please see the NetBSD web site at http://www.netbsd.org/) NetBSD is a completely integrated system. In addition to its highly portable, high performance kernel, NetBSD features a complete set of user utilities, compilers for several languages, The X Window System, and nu- merous other tools, all accompanied by full source code. NetBSD is a creation of the members of the Internet community. Without the unique cooperation and coordination the net makes possible, it's likely that NetBSD wouldn't exist. Upgrade path to NetBSD 1.4.2 If you are not installing your system ``from scratch'' but instead are going to upgrade an existing system already running NetBSD you need to know which versions you can upgrade with NetBSD 1.4.2. NetBSD 1.4.2 is an upgrade of NetBSD 1.4.1, NetBSD 1.4 and earlier re- leases of NetBSD such as versions 1.3.3, 1.2 etc. The intermediate development versions of code available on the main trunk in our CVS repository (also known as ``NetBSD-current'') from after the point where the release cycle for 1.4 was started are designated by ver- sion identifiers such as 1.4A, 1.4B, 1.4P etc. These identifiers do not designate releases, but indicate major changes in internal kernel APIs. Note that the kernel from NetBSD 1.4.2 can not be used to upgrade a sys- tem running one of those intermediate development versions. Trying to use the NetBSD 1.4.2 kernel on such a system will in all probability re- sult in problems. Please also note that it is not possible to do a direct ``version'' com- parison between any of the intermediate development versions mentioned above and 1.4.2 to determine if a given feature is present or absent in 1.4.2. The development of 1.4, 1.4.1 and 1.4.2 is done on a separate branch in the CVS repository which was created when the release cylcle for 1.4 was started, and during the release cycles for all these versions selective fixes (with minor impact on the stability of the code on the release branch) have been imported from the main development trunk. So, there are features in 1.4.2 which were not in e.g. 1.4H, but the reverse is also true. Major Changes Between 1.4.1 and 1.4.2 The complete list of changes between NetBSD 1.4.1 and 1.4.2 can be found in the file CHANGES-1.4.2 in the top directory of the source tree. The following are the highlights only. o A driver for the Alteon Gigabit Ethernet cards has been added, see ti(4). o A driver for the Realtek 8129/8239 Fast Ethernet PCI cards have been added, see rl(4). o A driver for the DPT SmartCache and SmartRAID III or IV SCSI adapters has been added, see dpt(4). o A driver for the BOCA IOAT66 6-port ISA serial adapter has been added, see ioat(4). o Support for the X-surf Amiga board has been added. o Support has been added for ext2fs revision 1, with read-only support for the ``sparse super'' and the ``filetype'' options. o BIND has been upgraded to version 8.2.2-P5. o The IPF packet filtering software has been updated to version 3.3.5. o Tcpdump now does hex/ascii dumps of packet contents if asked to do so. o An implementation of the System V user management utilities has been added. o The name ``errno'' is now always a macro which expands to a function call. This is done to ease the integration of thread libraries with the code in both system and third-party libraries. Please include to access the correct definition of ``errno''. o A utility for making temporary files for shell scripts has been added, see mktemp(1). o The automounter utility amd(8) has been updated to fix a security problem. o A security problem in procfs has been fixed. Procfs is not used by default in NetBSD. o The floating point emulation on the ports using the m68k CPU has been reverted to the version in NetBSD 1.4 (the version in 1.4.1 had prob- lems). o Several subsystems have received substantial work, such as RAIDframe, LFS, and the package tools. In addition, many, many bugs have been fixed -- more than 100 problems reported through our problem tracking system have been fixed, and many other non-reported problems have also been found and fixed. See the CHANGES-1.4.2 file for the complete list. Known caveats with 1.4.2 The following are the major known issues with NetBSD 1.4.2. o The upgrade of ipf(8) caused a change of the kernel API. Thus, if you are using ipf(8) you need to upgrade both the kernel and the us- er-land utilities to control that feature in order for it to work. o As part of fixing a kernel bug, ``struct vfsnode'' needed to change size. This will unfortunately, and contrary to tradition for patch releases, cause incompatibilities for users of file system LKMs com- piled for 1.4 and 1.4.1. o Although LFS has been improved between 1.4.1 and 1.4.2, it can proba- bly still be characterized as being of ``beta test'' quality, e.g. filling the file system still gives ``interesting'' effects. It should probably not be used to store critical data quite yet. o The version of the IPF packet filtering software in NetBSD 1.4.2 must be enabled with ``ipf -E'' before filtering or NAT rules can be set. Failure to do so may result in a panic. Major Changes Between 1.4 and 1.4.1 The complete list of changes between NetBSD 1.4 and 1.4.1 can be found in the file CHANGES-1.4.1 in the top directory of the source tree. o The NetBSD/alpha port's compatibility for Digital UNIX executables has been greatly improved. o Many bug fixes and improvements of the installation tools and utili- ties. o Support for more PCI serial/parallel cards has been added. o It is now possible to boot NetBSD/i386 on systems with 1GB of RAM. o The floating point emulation on the ports using the m68k CPU has been upgraded. o A fatal problem with /dev/random has been found and fixed. o Support for Alpha 21264 ev6 based systems has been added to NetB- SD/alpha. Major Changes Between 1.3 and 1.4 The NetBSD 1.4 release is a substantial improvement over its predeces- sors. We have provided numerous significant functional enhancements, in- cluding support for many new devices, integration of hundreds of bug fix- es, new and updated kernel subsystems, and many userland enhancements. The results of these improvements is a stable operating system fit for production use that rivals most commercially available systems. It is impossible to completely summarize the nearly two years of develop- ment that went into the NetBSD 1.4 release. Some highlights include: o Substantial improvements in the TCP/IP implementation, including nu- merous performance enhancements and bug fixes by Jason Thorpe and others. o A new, high efficiency kernel memory pool allocator by Paul Kranen- burg. This has been integrated into most kernel subsystems. o A new, totally rewritten virtual memory subsystem, UVM, created by Chuck Cranor, which is substantially cleaner and better performing than the old Mach derived VM subsystem. o Improved POSIX and XPG standards compliance. o Completion of the integration of all remaining 4.4BSD Lite-2 kernel improvements and bug fixes that had not been previously integrated. (Integration of all userland components was completed before NetBSD 1.3) o Several new ports, including macppc, bebox, sparc64, next68k, and others, have been integrated into the source tree. o The system compilers have been upgraded to egcs 1.1.1, and the system compiler toolchain now (mostly) uses the latest versions of GNU binu- tils instead of the obsolete versions left over from 4.4BSD Lite. o Everyone's favorite ftp(1) client has been improved even further. See the man page for details. o A new architecture independent console driver, wscons(4), has been integrated into many ports. o Numerous improvements have been made to the audio subsystem support, including support for MIDI device drivers. o Linux compatibility support has been improved. o A number of scheduler enhancements have yielded dramatic improvements in interactive performance and better control of background tasks. o Several network tunneling protocols, including GRE and IP in IP, have been implemented. o Kernel support for the CODA distributed file system has been added. o Manuel Bouyer completed major changes to the IDE support. It is now architecture independent. Major changes have been made to the IDE code for better error handling, improved ATAPI support, 32 bit data I/O support and bus-master DMA support on PCI IDE controllers. o Lennart Augustsson has added full USB support, permitting the use of a wide variety of Universal Serial Bus peripherals. The drivers should easily port to any future platforms that support the PCI bus. See usb(4) for an overview. o RAIDframe, version 1.1, from the Parallel Data Laboratory at Carnegie Mellon University, has been integrated. Supports RAID levels 0, 1, 4, 5, and more. o Luke Mewburn added nsswitch.conf(5) functionality to the system to specify the search order for system databases. o syslogd(8) now supports listening on multiple sockets, to make the chrooting of servers easier. o Most third party packages have been updated to the latest stable re- lease. As has been noted, there have also been innumerable bug fixes. Kernel interfaces have continued to be refined, and more subsystems and device drivers are shared among the different ports. You can look for this trend to continue. This is the third public release of NetBSD for the HP 9000/300 series of computers. The Future of NetBSD The NetBSD Foundation has been incorporated as a non-profit organization. Its purpose is to encourage, foster and promote the free exchange of com- puter software, namely the NetBSD Operating System. The foundation will allow for many things to be handled more smoothly than could be done with our previous informal organization. In particular, it provides the framework to deal with other parties that wish to become involved in the NetBSD Project. The NetBSD Foundation will help improve the quality of NetBSD by: o providing better organization to keep track of development efforts, including co-ordination with groups working in related fields. o providing a framework to receive donations of goods and services and to own the resources necessary to run the NetBSD Project. o providing a better position from which to undertake promotional ac- tivities. o periodically organizing workshops for developers and other interested people to discuss ongoing work. We intend to begin narrowing the time delay between releases. Our ambi- tion is to provide a full release every six to eight months. We hope to support even more hardware in the future, and we have a rather large number of other ideas about what can be done to improve NetBSD. We intend to continue our current practice of making the NetBSD-current development source available on a daily basis. In addition, Anonymous CVS access to the NetBSD source tree has been added since NetBSD 1.4.1; see http://www.netbsd.org/Changes/#anoncvs-available We have also added a browsable CVS repository on the web at http://cvsweb.netbsd.org/cgi-bin/cvsweb.cgi/ We intend to integrate free, positive changes from whatever sources sub- mit them, providing that they are well thought-out and increase the us- ability of the system. Above all, we hope to create a stable and accessible system, and to be responsive to the needs and desires of NetBSD users, because it is for and because of them that NetBSD exists. Sources of NetBSD Please refer to http://www.netbsd.org/Sites/net.html. NetBSD 1.4.2 Release Contents The root directory of the NetBSD 1.4.2 release is organized as follows: .../NetBSD-1.4.2/ BUGS Known bugs list (somewhat incomplete and out of date). CHANGES Changes since earlier NetBSD releases. LAST_MINUTE Last minute changes. MIRRORS A list of sites that mirror the NetBSD 1.4.2 distribution. README.files README describing the distribution's contents. TODO NetBSD's todo list (also somewhat incomplete and out of date). patches/ Post-release source code patches. source/ Source distribution sets; see below. In addition to the files and directories listed above, there is one di- rectory per architecture, for each of the architectures for which NetBSD 1.4.2 has a binary distribution. There are also 'README.export- control' files sprinkled liberally throughout the distribution tree, which point out that there are some portions of the distribution (i.e. the `domestic' portion) that may be subject to export regulations of the United States. It is your responsibility to determine whether or not it is legal for you to export these portions and to act accordingly. The NetBSD project maintains a web page at http://www.NetBSD.ORG/Misc/crypto-export.html which should contain up-to-date information on this issue. The source distribution sets can be found in subdirectories of the "source" subdirectory of the distribution tree. They contain the complete sources to the system. The source distribution sets are as follows: secrsrc.tgz: This set contains the "domestic" sources. These sources may be subject to United States export regulations. 421K gzipped, 2M uncompressed gnusrc.tgz: This set contains the "gnu" sources, including the source for the compiler, assembler, groff, and the other GNU utilities in the binary distribution sets. 19M gzipped, 84.3M uncompressed syssrc.tgz: This set contains the sources to the NetBSD 1.4.2 ker- nel, config(8), and dbsym(8). 13.9M gzipped, 68.3M uncompressed sharesrc.tgz: This set contains the "share" sources, which include the sources for the man pages not associated with any par- ticular program, the sources for the typesettable docu- ment set, the dictionaries, and more. 3M gzipped, 11.9M uncompressed src.tgz: This set contains all of the NetBSD 1.4.2 sources which are not mentioned above. 14.4M gzipped, 67.4M uncompressed Most of the above source sets are located in the source/sets subdirectory of the distribution tree. The secrsrc.tgz set is contained in the source/security subdirectory. This set, which may only be available to users in the United States and Canada, contains the sources normally found in /usr/src/domestic - primarily Kerberos and other cryptographic security related software. (Remember, because of United States law, it may not be legal to distribute this set to locations outside of the Unit- ed States and Canada. Again, see http://www.NetBSD.ORG/Misc/crypto-export.html for updated information on this issue.) The source sets are distributed as compressed tar files. They may be un- packed into /usr/src with the command: cat set_name.tgz | gunzip | (cd /; tar xpf - ) The sets/Split/ and security/Split/ subdirectories contain split versions of the source sets for those users who need to load the source sets from floppy or otherwise need a split distribution. The split sets are are named "set_name.xx" where "set_name" is the distribution set name, and "xx" is the sequence number of the file, starting with "aa" for the first file in the distribution set, then "ab" for the next, and so on. All of these files except the last one of each set should be exactly 240,640 bytes long. (The last file is just long enough to contain the remainder of the data for that distribution set.) The split distributions may be reassembled and extracted with cat as follows: cat set_name.?? | gunzip | (cd /; tar xpf - ) In each of the source distribution set directories, there is a file named CKSUMS which contains the checksums of the files in that directory, as generated by the cksum(1) utility. You can use cksum to check the in- tegrity of the archives, if you suspect that one of the files is corrupt and have access to a cksum binary. Checksums based on other algorithms may also be present - see the release(7) man page for details. NetBSD/hp300 Subdirectory Structure The hp300-specific portion of the NetBSD 1.4.2 release is found in the hp300 subdirectory of the distribution: .../NetBSD-1.4.2/hp300/ INSTALL.html INSTALL.ps INSTALL.txt INSTALL.more Installation notes; this file. The .more file contains underlined text using the more(1) conventions for indicat- ing italic and bold display. binary/ sets/ hp300 binary distribution sets; see below. security/ hp300 security distribution; see below. installation/ miniroot/ hp300 miniroot images; see below. misc/ Miscellaneous hp300 installation helper utili- ties; see installation section below. Binary Distribution Sets The NetBSD hp300 binary distribution sets contain the binaries which com- prise the NetBSD 1.4.2 release for the hp300. There are eight binary dis- tribution sets and the security distribution set. The binary distribu- tion sets can be found in the hp300/binary/sets subdirectory of the NetBSD 1.4.2 distribution tree, and are as follows: base The NetBSD 1.4.2 hp300 base binary distribution. You must install this distribution set. It contains the base NetBSD utilities that are necessary for the system to run and be minimally functional. It includes shared library support, and excludes everything described below. 10.7M gzipped, 29.7M uncompressed comp Things needed for compiling programs. This set includes the system include files (/usr/include) and the various system libraries (except the shared libraries, which are included as part of the base set). This set also includes the manual pages for all of the utilities it contains, as well as the system call and library manual pages. 8.2M gzipped, 28M uncompressed etc This distribution set contains the system configuration files that reside in /etc and in several other places. This set must be installed if you are installing the system from scratch, but should not be used if you are upgrading. (If you are upgrading, it's recommended that you get a copy of this set and carefully upgrade your configuration files by hand.) 59K gzipped, 370K uncompressed games This set includes the games and their manual pages. 2.8M gzipped, 7M uncompressed kern This set contains a NetBSD/hp300 1.4.2 GENERIC kernel, named /netbsd. You must install this distribution set. 563k gzipped, 1.2M uncompressed man This set includes all of the manual pages for the binaries and other software contained in the base set. Note that it does not include any of the manual pages that are included in the other sets. 4.2M gzipped, 16.6M uncompressed misc This set includes the (rather large) system dictionaries, the typesettable document set, and other files from /usr/share. 2.2M gzipped, 8.3M uncompressed text This set includes NetBSD's text processing tools, including groff(1), all related programs, and their manual pages. 1.3M gzipped, 4.5M uncompressed The hp300 security distribution set is named secr and can be found in the hp300/binary/security subdirectory of the NetBSD 1.4.2 distribution tree. It contains security- related binaries which depend on cryptographic source code. You do not need this distribution set to use encrypted passwords in your password file; the base distribution includes a crypt library which can perform only the one-way encryption function. The security distribution includes a version of the Kerberos IV network security system, and a Kerberized version of telnet(1) program. The secr distribution set can be found only on those sites which carry the complete NetBSD distribution and which can legally obtain it. Because of United States law, it may not be legal to distribute this set to locations outside of the United States and Canada. See http://www.NetBSD.ORG/Misc/crypto-export.html for updated information on this issue. NetBSD maintains its own set of sources for the X Window System in order to assure tight integration and compatibility. These sources are based on XFree86, and tightly track XFree86 releases. They are currently equivalent to XFree86 3.3.6. Binary sets for the X Window system are distributed with NetBSD. Unfortunately there is no R6.3 Xserver for NetBSD/hp300 yet, so we can only distribute the X clients this time. The sets are: xbase The basic files needed for a complete X client environment. This does not include the X servers. 2.5M gzipped, 7.6M uncompressed xcomp The extra libraries and include files needed to compile X source code. 1.7M gzipped, 7.1M uncompressed xcontrib Programs that were contributed to X. 183k gzipped, 686k uncompressed xfont Fonts needed by X. The hp300 binary distribution sets are distributed as gzipped tar files named with the extension .tgz, e.g. base.tgz. The instructions given for extracting the source sets work equally well for the binary sets, but it is worth noting that if you use that method, the files are /-relative and therefore are extracted below the current directory. That is, if you want to extract the binaries into your system, i.e. replace the system binaries with them, you have to run the tar xfp command from /. The following are included in the hp300/installation directory: miniroot/ miniroot.fs.gz A copy of the miniroot filesystem. misc/ HP-IB.geometry A file containing geometry for some HB-IB disk drives. SYS_INST.gz A gzipped copy of the SYS_INST miniroot in- stallation program. SYS_UBOOT.gz A gzipped copy of the universal boot block. Supports Network, tape and disk booting. This is useful if you are installing a disk- less NetBSD/hp300 system. rbootd.tgz Source code for the rbootd program included with NetBSD. It requires that the server has a Berkeley Packet Filter (bpf). You will need to compile this version of rbootd if server system does not have this utility al- ready. The following are included in the hp300/binary/kernel directory: netbsd.gdb.gz A gzipped GENERIC kernel with debugging symbols. netbsd.gz A gzipped GENERIC kernel. Note Each directory in the hp300 binary distribution also has its own checksum files, just as the source distribution does: All BSDSUM files are historic BSD checksums for the various files in that directory, in the format produced by the command: cksum -o 1 file All CKSUM files are POSIX checksums for the various files in that directory, in the format produced by the command: cksum file. All MD5 files are MD5 digests for the various files in that direc- tory, in the format produced by the command: cksum -m file. All SYSVSUM files are historic AT&T System V UNIX checksums for the various files in that directory, in the format produced by the command: cksum -o -2 file. The MD5 digest is the safest checksum, followed by the POSIX checksum. The other two checksums are provided only to ensure that the widest possible range of system can check the integrity of the release files. NetBSD/hp300 System Requirements and Supported Devices NetBSD/hp300 1.4.2 will run on most HP 9000/300- and 400-series machines. The smallest amount of RAM that has been tested is 4M. If you wish to run X, more RAM is recommended. Here is a table of recommended HD partition sizes for a full install: partition: advise needed root (/) 25M 15M user (/usr) 150M 100M swap (2 or 3 * RAM) 6M (see note below) Anything else is up to you! Note: The hp300 installation procedure uses a `miniroot' filesystem which is placed into the swap area of the disk. The swap parti- tion must be large enough to hold this miniroot image. The following HP hardware is supported: CPUs: o 68020-based: 318, 319, 320, 330, and 350. o 68030-based: 340, 345, 360, 370, 375, and 400(*). o 68040-based: 380, 425(*), and 433(*). Disks: o HP-IB/CS80: 7912, 7914, 7933, 7936, 7937, 7945, 7957, 7958, 7959, 2200, and 2203. o SCSI-I(**), including magneto-optical and CD-ROM. Tape drives: o Low-density HP-IB/CS80 cartridge: 7914, 7946, and 9144. o High-density HP-IB/CS80 cartridge: 9145. o HP-IB/CS80 1/2": 7974A, 7978A/B, 7979A, 7980A, and 7980XC. o SCSI: HP DAT, Exabyte, and SCSI QIC drives such as the Archive Viper. RS232 interfaces: o 98644 built-in single port (dca). o 98642 4-port (dcm). o 98638 8-port (dcm). Network interfaces: o 98643 built-in and add-on LAN cards. Displays: o 98544, 98545, and 98547 color and monochrome Topcat. o 98548, 98549, and 98550 color and monochrome Catseye. o 98700 and 98710 Gatorbox. o 98720 and 98721 Renaissance. o 98730 and 98731 DaVinci. o A1096A monochrome Hyperion. Input devices: o General interface supporting all HIL devices: keyboard, 2 and 3 button mice(***), and ID module. Miscellaneous: o Battery-backed real-time clock. o 98624 built-in HP-IB interface. o 98625A and 98625B `fast' HP-IB interface. o 98658A built-in and add-on SCSI interface. o Printers and plotters on RS232 and HP-IB. o SCSI autochanger. (*) 400-series machines configured for Domain/OS are not fully sup- ported, notably, the keyboard doesn't work and the ROMs must be in `HP-UX mode'. (**) SCSI-II drives are known to work, though this may require changing a jumper on some drives. See your disk's documentation for de- tails. (***) Serial mice connected to a `HIL to quad' converter are also known to work. If it's not on this list, there is no official support for it in this re- lease. Getting the NetBSD System on to Useful Media Installation is supported from several media types, including: o Tape o CD-ROM o NFS o FTP The steps necessary to prepare the distribution sets for installation de- pend on which method of installation you choose. The various methods are explained below. To prepare for installing via a tape: If you wish to load SYS_INST from tape, it must appear on the tape before any other files. To copy this onto tape, use a command like the follow- ing: dd if=SYS_INST of= obs=20b conv=osync Note that not all HP BOOTROMs support booting from SCSI tapes. Copying the miniroot to disk from tape is not currently supported. Howev- er, it is planned for a future release. If you wish to extract binary sets onto your disk from tape, you must first place them on the tape. The easiest way to do this is with the dd(1) command. Make sure you use a `no-rewind-on-close' tape device. For example: for file in base.tgz etc.tgz; do dd if=${file} of=/dev/nrst0 done Note that depending on your tape drive, you may need to explicitly set the EOF marker at the end of each file. It may also be necessary to use the `conv=osync' argument to dd(1). Note that this argument is incompat- ible with the `bs=' argument. Consult the tape-related manual pages on the system where the tapes are created for more details. To prepare for installing via NFS: SYS_INST currently requires an NFS server from which to copy the mini- root. o This filesystem must be exported with root permissions, but may be exported read-only. o The miniroot image _must_ reside in the `root' of the mounted filesystem. For example, if the client system mounts `server:/u', then the miniroot image must reside in /u on the server. This is due to limitations in the file lookup code used in SYS_INST, and may be fixed in a future release. o If you also wish to install the binary sets from the NFS server, place them in a properly exported filesystem on the server. Note that these files do not suffer from the same placement restrictions as the miniroot. To prepare for installing via FTP: It is possible, using the `install' and `upgrade' programs in the mini- root, to extract the binary sets directly onto disk from an FTP server. This is by far the easiest installation method, as you may specify to have all sets extracted at once, providing that they are located in the same directory on the server. All that is required in this case is that you have network access to an FTP server. This may be your account on another system, or may even be ftp.NetBSD.ORG itself. If you wish to use ftp.NetBSD.ORG as your FTP file server, you may want to keep the following information handy: IP Address: ftp.NetBSD.ORG Login: anonymous Password: Server path: /pub/NetBSD/NetBSD-1.4.2/hp300/binary/sets Note: if you're not using a nameserver during installation, you might find 204.152.184.75 handy; it's the IP address of ftp.NetBSD.ORG as of December, 29, 1997. Preparing your System for NetBSD Installation Currently, only installing the miniroot from the network is supported. This may change in a future release. You will need information about your disk's geometry, based on 512-byte sectors. You must have this information before proceeding. The file `.../installation/misc/HP-IB.geometry' has geometry inforomation for sev- eral HP-IB disks, but may be incomplete. Geometry may be calculated from an HP-UX `/etc/disktab' entry, but note that HP-UX geometry is based on 1024 byte sectors, while NetBSD's is based on 512 byte sectors. A quick note about partitions: Since the target disk will become the boot disk for your new NetBSD/hp300 installation, you will need to treat the `a' and `c' partitions in a special manner. Due to the size of the NetB- SD/hp300 boot program (it spills into the area after the disklabel), it is necessary to offset the `a' partition one cylinder from the beginning of the disk. Later, the `c' partition will be marked with the type `FS_BOOT' and may not be used for a filesystem. (For those unfamiliar with historic BSD partition conventions, the `c' partition is defined as `the entire disk', or the `raw partition'.) A quick note about disk numbers: While in the SYS_INST program, you may use different unit numbers for the disks than when the NetBSD kernel is running. The unit number for a disk while in SYS_INST is calculated with the following formula: unit = (controller * 8) + slave Controllers are numbered 0, 1, ... starting with the lowest select code. SCSI controllers and HP-IB controllers are counted separately. Therefore, if you had a system with an internal HP-IB interface at select code 7, a fast HP-IB interface at select code 14, and a SCSI interface at select code 16, unit numers might be something like the following: Location Unit HP-IB at 7, slave 2 2 (disk: rd2) HP-IB at 14, slave 5 13 (disk: rd13) SCSI at 16, slave 0 0 (disk: sd0) Miniroot installation via network Note: Booting sys_inst via the network on early hp300 models is only possible if your bootrom is rev. c or later. When checking the revision of your BOOTROM, use what it printed on the console dur- ing the self-test, not what may be printed on a sticker on the chip itself. In order to complete this process, you will need the following from the .../installation/misc directory of the distribution: SYS_INST.gz The standalone disklabel and miniroot installation tool. This file must be un-gzipped before using. And you will need the following from the .../installation/miniroot direc- tory of of the distribution: miniroot.fs.gz A miniroot filesystem image. To boot SYS_INST via the network, you will need a system capable of han- dling boot requests for an HP workstation. If you will use this method, see the special note below. To boot SYS_INST from tape, you need only place SYS_INST on the tape as the first file. Loading SYS_INST via the network xxxxxxx If you wish to load the SYS_INST program via the network, you may need the following from the `.../installation/misc' direc- tory in addition to the items listed above: rbootd.tgz Source code for the rbootd program included with NetBSD. It requires that the server has a Berkeley Packet Filter (bpf). You will need to compile this version of rbootd if your server system does not have this utility already. First of all, configure your rbootd to handle boot requests from the client. NOTE: NetBSD's `rbootd' is slightly different from HP-UX's. To configure NetBSD's `rbootd', create a file called `/etc/rbootd.conf' and place in it an entry like the following: 08:00:09:04:AA:33 SYS_INST # thunder-egg The first column is the ethernet address of the client's net- work interface. The second column is the program to send to the client, and anything after the `#' is a comment. Once you have rbootd running, copy the SYS_INST program to the /usr/mdec/rbootd directory on your server. If this directory doesn't exist already, you will need to create it. For information on configuring rbootd under HP-UX, see the rbootd(1M) manual page on your server system. Once `rbootd' is configured and running, you will be ready to continue. Make sure that the miniroot filesystem image has been un-gzipped, and that it resides in a filesystem what is exported to the client. See the manual pages on your server system if you need more information about ex- porting filesystems. You are now ready to SYS_INST. During the client's self-test cycle, press the space bar a few times. Shortly, you should see a menu of possible boot options appear. Select the option corresponding to SYS_INST. SYS_IN- ST will load and prompt you for a command. If this is a new NetBSD installation, you will need to place a disklabel on the disk. sys_inst> disklabel Note: It may be worth selecting the `zap' option initially to ensure that the disklabel area is clear. This may be especially impor- tant if an HP-UX boot block had been previously installed on the disk. Select the `edit' option, and answer the questions about your disk. There may be several questions which you may not be sure of the answers to. Listed below are guidelines for SCSI and HP-IB disks: Bad sectoring? NO Ecc? NO Interleave? 1 Trackskew? 0 Cylinderskew? 0 Headswitch? 0 Track-to-track? 0 Drivedata 0-4? 0 (for all Drivedata values) Next, you will be asked to fill out the partition map. You must provide responses for all 8 partitions. Remember, you must allocate at least 6M for the `b' partition, or else the miniroot will not fit. Set the size and offset of any unused partition to 0. Note that sizes and offsets are expressed in `n sectors', assuming 512 byte sectors. Care should be taken to ensure that partitions begin and end on cylinder boundaries (i.e. size and offset is an even multiple of the number of sectors per cylinder). While this is not technically necessary, it is generally encouraged. Note: When setting the partition type of the `b' partition, make sure to specify it as an `ffs' partition so that the miniroot can be mounted (even if this will be a swap partition). You will be giv- en a chance to clean this up later in the installation process. Once you have edited the label, select the `show' option to verify that it is correct. If so, select `write' and `done'. Otherwise, you may re- edit the label. The next step is to copy the miniroot image onto the target disk. sys_inst> miniroot You will be prompted for the target disk and the source of the miniroot filesytem image. Enter the filename of the miniroot image. Note that this file must reside in the server directory being mounted. Next you will be asked for the client's IP address, netmask, and default router, the server's IP ad- dress, and the directory on the server to mount. Once you have entered this information, SYS_INST will attempt to mount the NFS server and begin copying the miniroot filesystem to the `b' partition of the target disk. Is is worth noting that this copy may take a while. It might be worth grabbing a cup of coffee at this point. Once the miniroot filesystem image has been copied onto the target disk, you may boot from the miniroot filesystem. sys_inst> boot Enter the disk from which to boot. The kernel in the miniroot filesystem will be booted into single-user mode. Installing the NetBSD System The miniroot's install program is very simple to use. It will guide you through the entire process, and is well automated. Additional improve- ments are planned for future releases. The miniroot's install program will: o Allow you to place disklabels on additional disks. Note that parti- tion sizes and offsets are expressed in sectors. When you fill out the disklabel, you will need to specify partition types and filesys- tem parameters. If you're unsure what the these values should be, use the following: fstype: 4.2BSD fsize: 1024 bsize: 4096 cpg: 16 If the partition will be a swap partition, use the following: fstype: swap fsize: 0 (or blank) bsize: 0 (or blank) cpg: 0 (or blank) You will also need to specify the number of partitions. The number of partitions is determined by the `index' of the last partition let- ter, where a == 1, b == 2, etc. Therefore, if the last filled parti- tion is partition `g', there are 7 partitions. Any partitions with size of 0 may be removed from the list. If the disk is the boot disk, you _must_ offset the root partition (`a') one cylinder, as the hp300 boot code if large enough to spill past the label area. In this case, the `c' partition must be fstype `boot'. Anything after a `#' is a comment. The following is an example disklabel partition map: 7 partitions: # size offset fstype [fsize bsize cpg] a: 30912 448 4.2BSD 1024 8192 16 # (Cyl. 1 - 69) b: 130816 31360 swap # (Cyl. 70 - 361) c: 1296512 0 boot # (Cyl. 0 - 2893) e: 81984 162176 4.2BSD 1024 8192 16 # (Cyl. 362 - 544) f: 102592 244160 4.2BSD 1024 4096 16 # (Cyl. 545 - 773) g: 949760 346752 4.2BSD 1024 8192 16 # (Cyl. 774 - 2893) o Create filesystems on target partitions. o Allow you to set up your system's network configuration. Remember to specify host names without the domain name appended to the end. For example use `foo' instead of `foo.bar.org'. If, during the process of configuring the network interfaces, you make a mistake, you will be able to re-configure that interface by simply selecting it for con- figuration again. o Mount target filesystems. You will be given the opportunity to manu- ally edit the resulting /etc/fstab. o Extract binary sets from the media of your choice. o Copy configuration information gathered during the installation pro- cess to your root filesystem. o Make device nodes in your root filesystem. o Copy a new kernel onto your root partition. o Install a new boot block. o Check your filesystems for integrity. First-time installation on a system through a method other than the in- stallation program is possible, but strongly discouraged. Post installation steps Once you've got the operating system running, there are a few things you need to do in order to bring the system into a propperly configured state, with the most important ones described below. 1. Configuring /etc/rc.conf If you haven't done any configuration of /etc/rc.conf, the system will drop you into single user mode on first reboot with the message /etc/rc.conf is not configured. Multiuser boot aborted. and with the root filesystem mounted read-write. When the system asks you to choose a shell, simply hit return to get to a prompt. If you are asked for a terminal type, respond with vt220 (or whatever is appropriate for your terminal type) and hit return. At this point, you need to configure at least one file in the /etc directory. Change to the /etc directory and take a look at the /etc/rc.conf file. Modify it to your tastes, making sure that you set rc_configured=YES so that your changes will be enabled and a multi-user boot can proceed. If your /usr directory is on a separate partition and you do not know how to use 'ed' or 'ex', you will have to mount your /usr partition to gain access to 'vi'. Do the follow- ing: mount /usr export TERM=vt220 If you have /var on a seperate partition, you need to repeat that step for it. After that, you can edit /etc/rc.conf with vi(1). When you have finished, type exit at the prompt to leave the single-user shell and continue with the multi-user boot. Other values that need to be set in /etc/rc.conf for a networked en- vironment are hostname and possibly defaultroute, furthermore add an ifconfig_int for your interface , along the lines of ifconfig_de0="inet 123.45.67.89 netmask 255.255.255.0" or, if you have myname.my.dom in /etc/hosts: ifconfig_de0="inet myname.my.dom netmask 255.255.255.0" To enable proper hostname resolution, you will also want to add an /etc/resolv.conf file or (if you are feeling a little more adventur- ous) run named(8). See resolv.conf(5) or named(8) for more informa- tion. Other files in /etc that are new to NetBSD 1.4 and may require modi- fication or setting up include /etc/mailer.conf, /etc/nsswitch.conf and /etc/wscons.conf. 2. Logging in After reboot, you can log in as root at the login prompt. There is no initial password, but if you're using the machine in a networked environment, you should create an account for yourself (see below) and protect it and the "root" account with good passwords. 3. Adding accounts Use the vipw(8) command to add accounts to your system, do not edit /etc/passwd directly. See adduser(8) for more information on the process of how to add a new user to the system. 4. The X Window System If you have installed the X window system, look at the files in /usr/X11R6/lib/X11/doc for information. Don't forget to add /usr/X11R6/bin to your path in your shell's dot file so that you have access to the X binaries. 5. Installing 3rd party packages There is a lot of software freely available for Unix-based systems, almost all of which can run on NetBSD. Modifications are usually needed to when transferring programs between different Unix-like systems, so the NetBSD packages collection incorporates any such changes necessary to make that software run on NetBSD, and makes the installation (and deinstallation) of the software packages easy. There's also the option of building a package from source, in case there's no precompiled binary available. Precompiled binaries can be found at ftp://ftp.netbsd.org/pub/NetBSD/packages/ Package sources for compiling packages can be obtained by retrieving the file ftp://ftp.netbsd.org/pub/NetBSD/NetBSD- current/tar_files/pkgsrc.tar.gz and extracting it into /usr/pkgsrc. See /usr/pkgsrc/README then for more information. 6. Misc o To adjust the system to your local timezone, point the /etc/localtime symlink to the appropriate file under /usr/share/zoneinfo. o Edit /etc/aliases to forward root mail to the right place (run newaliases(1) afterwards.) o The /etc/sendmail.cf file will almost definitely need to be ad- justed; files aiding in this can be found in /usr/share/sendmail. See the README file there for more infor- mation. o Edit /etc/rc.local to run any local daemons you use. o Many of the /etc files are documented in section 5 of the manu- al; so just invoking man filename is likely to give you more information on these files. Upgrading a previously-installed NetBSD System It is possible to easily upgrade your existing NetBSD/hp300 system using the upgrade program in the miniroot. If you wish to upgrade your system by this method, simply select the `upgrade' option once the miniroot has booted. The upgrade program with then guide you through the procedure. The upgrade program will: o Enable the network based on your system's current network configura- tion. o Mount your existing filesystems. o Extract binary sets from the media of your choice. o Fixup your system's existing /etc/fstab, changing the occurrences of `ufs' to `ffs' and let you edit the resulting file. o Make new device nodes in your root filesystem. o Don't forget to extract the `kern' set from the distribution. NOTE: the existing kernel WILL NOT be backed up; doing so would be point- less, since older kernels may not be capable of running NetBSD 1.4.2 executables. o Install a new boot block. o Check your filesystems for integrity. While using the miniroot's upgrade program is the preferred method of up- grading your system, it is possible to upgrade your system manually. To do this, follow the following procedure: o Place _at least_ the `base' binary set in a filesystem accessible to the target machine. A local filesystem is preferred, since the NFS subsystem in the NetBSD 1.4.2 kernel may be incompatible with your old binaries. o Back up your pre-existing kernel and copy the 1.4.2 kernel into your root partition. o Reboot with the 1.4.2 kernel into single-user mode. o Check all filesystems: /sbin/fsck -pf o Mount all local filesystems: /sbin/mount -a -t nonfs o If you keep /usr or /usr/share on an NFS server, you will want to mount those filesystems as well. To do this, you will need to enable the network: sh /etc/netstart o Run the update(8) daemon, to ensure that new programs are actually stored on disk. update o Make sure you are in the root filesystem and extract the `base' bina- ry set: cd / pax -zrvpe -f /path/to/base.tgz o Install a new boot block: cd /usr/mdec disklabel -B root disk (e.g. sd0) o Sync the filesystems: sync o At this point you may extract any other binary sets you may have placed on local filesystems, or you may wish to extract additional sets at a later time. To extract these sets, use the following com- mands: cd / pax -zrvpe -f path_to_set NOTE: you SHOULD NOT extract the etc set if upgrading. Instead, you should extract that set into another area and carefully merge the changes by hand. Compatibility Issues With Previous NetBSD Releases Users upgrading from previous versions of NetBSD may wish to bear the following problems and compatibility issues in mind when upgrading to NetBSD 1.4.2 Note Only issues effecting an upgrade from NetBSD 1.3 or NetBSD 1.3.x are decribed here. o "machine" directory/link in "/usr/include" Description Some architecture may fail to install the comp set because the /usr/include/machine directory changed to a symbolic link in NetBSD 1.4. Fix If this happens, you can use the command # rm -r /usr/include/machine to remove the old directory and it contents and reinstall the comp set. Using online NetBSD documentation Documentation is available if you first install the manual distribution set. Traditionally, the ``man pages'' (documentation) are denoted by ``name(section)''. Some examples of this are o intro(1), o man(1), o apropros(1), o passwd(1), and o passwd(5). The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8. The man command is used to view the documentation on a topic, and is started by entering man [section] topic. The brackets [] around the sec- tion should not be entered, but rather indicate that the section is op- tional. If you don't ask for a particular section, the topic with the lowest numbered section name will be displayed. For instance, after log- ging in, enter man passwd to read the documentation for passwd(1). To view the documentation for passwd(5)m enter man 5 passwd instead. If you are unsure of what man page you are looking for, enter apropos subject-word where subject-word is your topic of interest; a list of possibly related man pages will be displayed. Administrivia If you've got something to say, do so! We'd like your input. There are various mailing lists available via the mailing list server at majordomo@NetBSD.ORG. To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instruc- tions. There are various mailing lists set up to deal with comments and ques- tions about this release. Please send comments to: netbsd- comments@NetBSD.ORG. To report bugs, use the send-pr(1) command shipped with NetBSD, and fill in as much information about the problem as you can. Good bug reports in- clude lots of details. Additionally, bug reports can be sent by mail to: netbsd-bugs@NetBSD.ORG. Use of send-pr(1) is encouraged, however, because bugs reported with it are entered into the NetBSD bugs database, and thus can't slip through the cracks. There are also port-specific mailing lists, to discuss aspects of each port of NetBSD. Use majordomo to find their addresses. If you're inter- ested in doing a serious amount of work on a specific port, you probably should contact the "owner" of that port (listed below). If you'd like to help with this effort, and have an idea as to how you could be useful, send us mail or subscribe to: netbsd-help@NetBSD.ORG. As a favor, please avoid mailing huge documents or files to these mailing lists. Instead, put the material you would have sent up for FTP some- where, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it. Thanks go to o The former members of UCB's Computer Systems Research Group, includ- ing (but not limited to): Keith Bostic Ralph Campbell Mike Karels Marshall Kirk McKusick for their ongoing work on BSD systems, support, and encouragement. o Also, our thanks go to: Mike Hibler Rick Macklem Jan-Simon Pendry Chris Torek for answering lots of questions, fixing bugs, and doing the various work they've done. o UC Berkeley's Experimental Computing Facility provided a home for sun-lamp in the past, people to look after it, and a sense of humor. Rob Robertson, too, has added his unique sense of humor to things, and for a long time provided the primary FTP site for NetBSD. o Vixie Enterprises for hosting the NetBSD FTP, WWW and SUP server. o Redback Networks, Inc. for hosting the NetBSD Mail server. o Without CVS, this project would be impossible to manage, so our hats go off to Brian Berliner, Jeff Polk, and the various other people who've had a hand in making CVS a useful tool. o Dave Burgess burgess@cynjut.infonet.net has been maintaining the 386BSD/NetBSD/FreeBSD FAQ for quite some time, and deserves to be recognized for it. o The following individuals and organiztions (each in alphabetical or- der) have made donations or loans of hardware and/or money, to sup- port NetBSD development, and deserve credit for it: Steve Allen Jason Birnschein Mason Loring Bliss Jason Brazile Mark Brinicombe David Brownlee Simon Burge Dave Burgess Ralph Campbell Brian Carlstrom James Chacon Bill Coldwell Charles Conn Tom Coulter Charles D. Cranor Christopher G. Demetriou Scott Ellis Hubert Feyrer Castor Fu Greg Gingerich William Gnadt Michael Graff Guenther Grau Ross Harvey Charles M. Hannum Michael L. Hitch Kenneth Alan Hornstein Jordan K. Hubbard Soren Jorvang Scott Kaplan Noah M. Keiserman John Kohl Chris Legrow Ted Lemon Neil J. McRae Perry E. Metzger Herb Peyerl Mike Price Dave Rand Michael Richardson Heiko W. Rupp Brad Salai Chuck Silvers Thor Lancelot Simon Bill Sommerfeld Paul Southworth Ted Spradley Kimmo Suominen Jason R. Thorpe Steve Wadlow Krister Walfridsson Jim Wise Christos Zoulas AboveNet Communications, Inc. Advanced System Products, Inc. Avalon Computer Systems Bay Area Internet Solutions Brains Corporation, Japan Canada Connect Corporation Co-operative Research Centre for Enterprise Distributed Systems Technology Demon Internet, UK Digital Equipment Corporation Easynet, UK Free Hardware Foundation Innovation Development Enterprises of America Internet Software Consortium MS Macro System GmbH, Germany Numerical Aerospace Simulation Facility, NASA Ames Research Center Piermont Information Systems Inc. VMC Harald Frank, Germany Warped Communications, Inc. (If you're not on that list and should be, tell us! We probably were not able to get in touch with you, to verify that you wanted to be listed.) o Finally, we thank all of the people who've put sweat and tears into developing NetBSD since its inception in January, 1993. (Obviously, there are a lot more people who deserve thanks here. If you're one of them, and would like to mentioned, tell us!) We are... (in alphabetical order) The NetBSD core group: Alistair Crooks agc@NetBSD.ORG Jun-ichiro itojun Hagino itojun@NetBSD.ORG Frank van der Linden fvdl@NetBSD.ORG Luke Mewburn lukem@NetBSD.ORG Christos Zoulas christos@NetBSD.ORG The portmasters (and their ports): Mark Brinicombe mark@NetBSD.ORG arm32 Jeremy Cooper jeremy@NetBSD.ORG sun3x Ross Harvey ross@NetBSD.ORG alpha Ignatios Souvatzis is@NetBSD.ORG amiga Jun-ichiro itojun Hagino itojun@NetBSD.ORG sh3 Eduardo Horvath eeh@NetBSD.ORG sparc64 Paul Kranenburg pk@NetBSD.ORG sparc Anders Magnusson ragge@NetBSD.ORG vax Tsubai Masanari tsubai@NetBSD.ORG macppc Tsubai Masanari tsubai@NetBSD.ORG newsmips Minoura Makoto minoura@NetBSD.ORG x68k Phil Nelson phil@NetBSD.ORG pc532 Scott Reynolds scottr@NetBSD.ORG mac68k Darrin Jewell dbj@NetBSD.ORG next68k Kazuki Sakamoto sakamoto@NetBSD.ORG bebox Wolfgang Solfrank ws@NetBSD.ORG ofppc Jonathan Stone jonathan@NetBSD.ORG pmax Shin Takemura takemura@NetBSD.ORG hpcmips Jason Thorpe thorpej@NetBSD.ORG hp300 Frank van der Linden fvdl@NetBSD.ORG i386 Leo Weppelman leo@NetBSD.ORG atari Nathan Williams nathanw@NetBSD.ORG sun3 Steve Woodford scw@NetBSD.ORG mvme68k The NetBSD 1.4.2 Release Engineering team: Chris G. Demetriou cgd@NetBSD.ORG Havard Eidnes he@NetBSD.ORG Ted Lemon mellon@NetBSD.ORG Perry Metzger perry@NetBSD.ORG Curt Sampson cjs@NetBSD.ORG Developers and other contributors: Steve Allen wormey@NetBSD.ORG Julian Assange proff@NetBSD.ORG Lennart Augustsson augustss@NetBSD.ORG Christoph Badura bad@NetBSD.ORG Robert V. Baron rvb@NetBSD.ORG Erik Berls cyber@NetBSD.ORG John Birrell jb@NetBSD.ORG Mason Loring Bliss mason@NetBSD.ORG Manuel Bouyer bouyer@NetBSD.ORG John Brezak brezak@NetBSD.ORG Allen Briggs briggs@NetBSD.ORG Aaron Brown abrown@NetBSD.ORG David Brownlee abs@NetBSD.ORG Frederick Bruckman fredb@NetBSD.ORG Jon Buller jonb@NetBSD.ORG Simon Burge simonb@NetBSD.ORG Dave Burgess burgess@cynjut.infonet.net Robert Byrnes byrnes@NetBSD.org D'Arcy J.M. Cain darcy@NetBSD.ORG Dave Carrel carrel@NetBSD.ORG Bill Coldwell billc@NetBSD.ORG Julian Coleman jdc@NetBSD.ORG Chuck Cranor chuck@NetBSD.ORG Aidan Cully aidan@NetBSD.ORG Johan Danielsson joda@NetBSD.ORG Matt DeBergalis deberg@NetBSD.ORG Rob Deker deker@NetBSD.ORG Chris G. Demetriou cgd@NetBSD.ORG Jaromir Dolecek jdolecek@NetBSD.ORG Andy Doran ad@NetBSD.ORG Roland Dowdeswell elric@NetBSD.ORG Matthias Drochner drochner@NetBSD.ORG Jun Ebihara jun@NetBSD.ORG Havard Eidnes he@NetBSD.ORG Enami Tsugutomo enami@NetBSD.ORG Bernd Ernesti veego@NetBSD.ORG Erik Fair fair@NetBSD.ORG Hubert Feyrer hubertf@NetBSD.ORG Thorsten Frueauf frueauf@NetBSD.ORG Castor Fu castor@NetBSD.ORG Brian R. Gaeke brg@dgate.org Thomas Gerner thomas@NetBSD.ORG Simon J. Gerraty sjg@NetBSD.ORG Justin Gibbs gibbs@NetBSD.ORG Adam Glass glass@NetBSD.ORG Michael Graff explorer@NetBSD.ORG Brian C. Grayson bgrayson@NetBSD.ORG Brad Grantham grantham@tenon.com Matthew Green mrg@NetBSD.ORG Juergen Hannken-Illjes hannken@NetBSD.ORG Charles M. Hannum mycroft@NetBSD.ORG Eric Haszlakiewicz erh@NetBSD.ORG HAYAKAWA Koichi haya@NetBSD.ORG Rene Hexel rh@NetBSD.ORG Michael L. Hitch mhitch@NetBSD.ORG Christian E. Hopps chopps@NetBSD.ORG Ken Hornstein kenh@NetBSD.ORG Marc Horowitz marc@NetBSD.ORG Dean Huxley dean@netbsd.org ITOH Yasufumi itohy@NetBSD.ORG Matthew Jacob mjacob@NetBSD.ORG Lonhyn T. Jasinskyj lonhyn@NetBSD.ORG Chris Jones cjones@NetBSD.ORG Soren Jorvang soren@NetBSD.ORG Antti Kantee pooka@NetBSD.ORG Lawrence Kesteloot kesteloo@cs.unc.edu Thomas Klausner wiz@NetBSD.ORG Klaus Klein kleink@NetBSD.ORG John Kohl jtk@NetBSD.ORG Kevin Lahey kml@NetBSD.ORG Johnny C. Lam jlam@NetBSD.ORG Martin J. Laubach mjl@NetBSD.ORG Ted Lemon mellon@NetBSD.ORG Joel Lindholm joel@NetBSD.ORG Mike Long mikel@NetBSD.ORG Warner Losh imp@NetBSD.ORG Brett Lymn blymn@NetBSD.ORG Paul Mackerras paulus@NetBSD.ORG Dan McMahill dmcmahill@NetBSD.ORG Neil J. McRae neil@NetBSD.ORG Perry Metzger perry@NetBSD.ORG der Mouse mouse@NetBSD.ORG Joseph Myers jsm@NetBSD.ORG Ken Nakata kenn@NetBSD.ORG Bob Nestor rnestor@NetBSD.ORG Tohru Nishimura nisimura@NetBSD.ORG Masaru Oki oki@NetBSD.ORG Greg Oster oster@NetBSD.ORG Herb Peyerl hpeyerl@NetBSD.ORG Matthias Pfaller matthias@NetBSD.ORG Dante Profeta dante@NetBSD.ORG Chris Provenzano proven@NetBSD.ORG Waldi Ravens waldi@moacs.indiv.nl.net Darren Reed darrenr@NetBSD.ORG Michael Richardson mcr@NetBSD.ORG Tim Rightnour garbled@NetBSD.ORG Gordon Ross gwr@NetBSD.ORG Heiko W. Rupp hwr@NetBSD.ORG SAITOH Masanobu msaitoh@NetBSD.ORG Curt Sampson cjs@NetBSD.ORG Wilfredo Sanchez wsanchez@NetBSD.ORG Ty Sarna tsarna@NetBSD.ORG SATO Kazumi sato@NetBSD.ORG Matthias Scheler tron@NetBSD.ORG Karl Schilke (rAT) rat@NetBSD.ORG Konrad Schroder perseant@NetBSD.ORG Tim Shepard shep@NetBSD.ORG Takao Shinohara shin@NetBSD.ORG Chuck Silvers chs@NetBSD.ORG Thor Lancelot Simon tls@NetBSD.ORG Noriyuki Soda soda@NetBSD.ORG Bill Sommerfeld sommerfeld@NetBSD.ORG Bill Studenmund wrstuden@NetBSD.ORG Kevin Sullivan sullivan@NetBSD.ORG Kimmo Suominen kim@NetBSD.ORG Matt Thomas matt@NetBSD.ORG Christoph Toshok toshok@NetBSD.ORG Izumi Tsutsui tsutsui@NetBSD.ORG UCHIYAMA Yasushi uch@NetBSD.ORG Todd Vierling tv@NetBSD.ORG Aymeric Vincent aymeric@NetBSD.ORG Paul Vixie vixie@NetBSD.ORG Krister Walfridsson kristerw@NetBSD.ORG Lex Wennmacher wennmach@NetBSD.ORG Assar Westerlund assar@NetBSD.ORG Rob Windsor windsor@NetBSD.ORG Dan Winship danw@NetBSD.ORG Jim Wise jwise@NetBSD.ORG Colin Wood ender@NetBSD.ORG Legal Mumbo-Jumbo The following notices are required to satisfy the license terms of the software that we have mentioned in this document: This product includes software developed by the University of California, Berkeley and its contributors. This product includes software developed by the Computer Systems Engi- neering Group at Lawrence Berkeley Laboratory. This product includes software developed by the NetBSD Foundation, Inc. and its contributors. This product includes software developed by Adam Glass and Charles Han- num. This product includes software developed by Adam Glass. This product includes software developed by Berkeley Software Design, Inc. This product includes software developed by Charles D. Cranor and Wash- ington University. This product includes software developed by Charles D. Cranor. This product includes software developed by Charles Hannum, by the Uni- versity of Vermont and State Agricultural College and Garrett A. Wollman, by William F. Jolitz, and by the University of California, Berkeley, Lawrence Berkeley Laboratory, and its contributors. This product includes software developed by Charles Hannum. This product includes software developed by Charles M. Hannum. This product includes software developed by Chris Provenzano. This product includes software developed by Christian E. Hopps. This product includes software developed by Christopher G. Demetriou for the NetBSD Project. This product includes software developed by Christopher G. Demetriou. This product includes software developed by Christos Zoulas. This product includes software developed by David Jones and Gordon Ross. This product includes software developed by Dean Huxley. This product includes software developed by Eric S. Hvozda. This product includes software developed by Ezra Story. This product includes software developed by Gordon Ross. This product includes software developed by Gordon W. Ross and Leo Wep- pelman. This product includes software developed by Gordon W. Ross. This product includes software developed by Herb Peyerl. This product includes software developed by Ian W. Dall. This product includes software developed by Ignatios Souvatzis for the NetBSD Project. This product includes software developed by Jason R. Thorpe for And Com- munications, http://www.and.com/. This product includes software developed by Joachim Koenig-Baltes. This product includes software developed by Jochen Pohl for The NetBSD Project. This product includes software developed by John Polstra. This product includes software developed by Jonathan Stone and Jason R. Thorpe for the NetBSD Project. This product includes software developed by Jonathan Stone for the NetBSD Project. This product includes software developed by Jonathan Stone. This product includes software developed by Julian Highfield. This product includes software developed by Kenneth Stailey. This product includes software developed by Leo Weppelman. This product includes software developed by Lloyd Parkes. This product includes software developed by Mark Brinicombe. This product includes software developed by Markus Wild. This product includes software developed by Martin Husemann and Wolfgang Solfrank. This product includes software developed by Mats O Jansson and Charles D. Cranor. This product includes software developed by Mats O Jansson. This product includes software developed by Matthias Pfaller. This product includes software developed by Paul Kranenburg. This product includes software developed by Paul Mackerras. This product includes software developed by Peter Galbavy. This product includes software developed by Philip A. Nelson. This product includes software developed by Rodney W. Grimes. This product includes software developed by Scott Bartram. This product includes software developed by SigmaSoft, Th. Lockert. This product includes software developed by Terrence R. Lambert. This product includes software developed by Theo de Raadt and John Brezak. This product includes software developed by Theo de Raadt. This product includes software developed by TooLs GmbH. This product includes software developed by Winning Strategies, Inc. This product includes software developed by the Center for Software Sci- ence at the University of Utah. This product includes software developed by the University of Calgary De- partment of Computer Science and its contributors. This product includes software developed by the University of Vermont and State Agricultural College and Garrett A. Wollman. This product includes software developed for the FreeBSD project. This product includes software developed for the Internet Software Con- sortium by Ted Lemon. This product includes software developed for the NetBSD Project by Frank van der Linden. This product includes software developed for the NetBSD Project by Jason R. Thorpe. This product includes software developed for the NetBSD Project by John M. Vinopal. This product includes software developed for the NetBSD Project by Matthias Drochner. This product includes software developed for the NetBSD Project by Matthieu Herrb. This product includes software developed for the NetBSD Project by Perry E. Metzger. This product includes software developed for the NetBSD Project by Pier- mont Information Systems Inc. This product includes software developed for the NetBSD Project by Ted Lemon. This product includes software developed by LAN Media Corporation and its contributors. This product includes software developed by Michael Graff for the NetBSD Project. This product includes software developed by Niklas Hallqvist, C Stone and Job de Haas. This product includes software developed by the Computer Systems Labora- tory at the University of Utah. This product includes software developed at Ludd, University of Lule}, Sweden and its contributors. This product includes software developed by Gordon W. Ross. NetBSD 23 March 1999 27