INSTALL(8) NetBSD System Manager's Manual INSTALL(8) NNAAMMEE IINNSSTTAALLLL - Installation procedure for NetBSD/x68k DDEESSCCRRIIPPTTIIOONN AAbboouutt tthhiiss DDooccuummeenntt This document describes the installation procedure for NetBSD 1.4 on the _x_6_8_k platform. It is available in four different formats titled _I_N_S_T_A_L_L_._e_x_t, where _e_x_t is one of _._p_s, _._h_t_m_l, _._m_o_r_e, or _._t_x_t. _._p_s PostScript. _._h_t_m_l Standard internet HTML. _._m_o_r_e The enhanced text format used on Unix-like systems by the more(1) and less(1) pager utility programs. This is the format in which the on-line _m_a_n pages are generally pre- sented. _._t_x_t Plain old ASCII. You are reading the _m_o_r_e version. WWhhaatt iiss NNeettBBSSDD?? The NetBSD Operating System is a fully functional Open Source UN*X-like operating system derived from the Berkeley Networking Release 2 (Net/2), 4.4BSD-Lite, and 4.4BSD-Lite2 sources. NetBSD runs on twenty different system architectures featuring eight distinct families of CPUs, and is being ported to more. The NetBSD 1.4 release contains complete binary re- leases for fourteen different machine types. (The six remaining are not fully supported at this time and are thus not part of the binary distri- bution. For information on them, please see the NetBSD web site at hhttttpp::////wwwwww..nneettbbssdd..oorrgg//) NetBSD is a completely integrated system. In addition to its highly portable, high performance kernel, NetBSD features a complete set of user utilities, compilers for several languages, The X Window System, and nu- merous other tools, all accompanied by full source code. NetBSD is a creation of the members of the Internet community. Without the unique cooperation and coordination the net makes possible, it's likely that NetBSD wouldn't exist. CChhaannggeess SSiinnccee TThhee LLaasstt RReelleeaassee The NetBSD 1.4 release is a substantial improvement over its predeces- sors. We have provided numerous significant functional enhancements, in- cluding support for many new devices, integration of hundreds of bug fix- es, new and updated kernel subsystems, and many userland enhancements. The results of these improvements is a stable operating system fit for production use that rivals most commercially available systems. It is impossible to completely summarize the nearly two years of develop- ment that went into the NetBSD 1.4 release. Some highlights include: ++oo Substantial improvements in the TCP/IP implementation, including nu- merous performance enhancements and bug fixes by Jason Thorpe and others. ++oo A new, high efficiency kernel memory pool allocator by Paul Kranen- burg. This has been integrated into most kernel subsystems. ++oo A new, totally rewritten virtual memory subsystem, UVM, created by Chuck Cranor, which is substantially cleaner and better performing than the old Mach derived VM subsystem. ++oo Improved POSIX and XPG standards compliance. ++oo Completion of the integration of all remaining 4.4BSD Lite-2 kernel improvements and bug fixes that had not been previously integrated. (Integration of all userland components was completed before NetBSD 1.3) ++oo Several new ports, including macppc, bebox, sparc64, next68k, and others, have been integrated into the source tree. ++oo The system compilers have been upgraded to egcs 1.1.1, and the system compiler toolchain now (mostly) uses the latest versions of GNU binu- tils instead of the obsolete versions left over from 4.4BSD Lite. ++oo Everyone's favorite ftp(1) client has been improved even further. See the man page for details. ++oo A new architecture independent console driver, wscons(4), has been integrated into many ports. ++oo Numerous improvements have been made to the audio subsystem support, including support for MIDI device drivers. ++oo Linux compatibility support has been improved. ++oo A number of scheduler enhancements have yielded dramatic improvements in interactive performance and better control of background tasks. ++oo Several network tunneling protocols, including GRE and IP in IP, have been implemented. ++oo Kernel support for the CODA distributed file system has been added. ++oo Manuel Bouyer completed major changes to the IDE support. It is now architecture independent. Major changes have been made to the IDE code for better error handling, improved ATAPI support, 32 bit data I/O support and bus-master DMA support on PCI IDE controllers. ++oo Lennart Augustsson has added full USB support, permitting the use of a wide variety of Universal Serial Bus peripherals. The drivers should easily port to any future platforms that support the PCI bus. See usb(4) for an overview. ++oo RAIDframe, version 1.1, from the Parallel Data Laboratory at Carnegie Mellon University, has been integrated. Supports RAID levels 0, 1, 4, 5, and more. ++oo Luke Mewburn added nsswitch.conf(5) functionality to the system to specify the search order for system databases. ++oo syslogd(8) now supports listening on multiple sockets, to make the chrooting of servers easier. ++oo Most third party packages have been updated to the latest stable re- lease. As has been noted, there have also been innumerable bug fixes. Kernel interfaces have continued to be refined, and more subsystems and device drivers are shared among the different ports. You can look for this trend to continue. NetBSD 1.4 is the third public major release of NetBSD for the x68k plat- form. In addition to above port-independent improvements, many device drivers are reorganized, and some of them now utilize the machine-independent backend. Also the boot program is improved to load the kernel from any hard drives. TThhee FFuuttuurree ooff NNeettBBSSDD The NetBSD Foundation has been incorporated as a non-profit organization. Its purpose is to encourage, foster and promote the free exchange of com- puter software, namely the NetBSD Operating System. The foundation will allow for many things to be handled more smoothly than could be done with our previous informal organization. In particular, it provides the framework to deal with other parties that wish to become involved in the NetBSD Project. The NetBSD Foundation will help improve the quality of NetBSD by: ++oo providing better organization to keep track of development efforts, including co-ordination with groups working in related fields. ++oo providing a framework to receive donations of goods and services and to own the resources necessary to run the NetBSD Project. ++oo providing a better position from which to undertake promotional ac- tivities. ++oo periodically organizing workshops for developers and other interested people to discuss ongoing work. We intend to begin narrowing the time delay between releases. Our ambi- tion is to provide a full release every six to eight months. We hope to support even _m_o_r_e hardware in the future, and we have a rather large number of other ideas about what can be done to improve NetBSD. We intend to continue our current practice of making the NetBSD-current development source available on a daily basis. In addition, we intend to provide Anonymous CVS access to the NetBSD source tree in the near fu- ture, so that anyone on the internet can examine the full NetBSD source code repository. We intend to integrate free, positive changes from whatever sources sub- mit them, providing that they are well thought-out and increase the us- ability of the system. Above all, we hope to create a stable and accessible system, and to be responsive to the needs and desires of NetBSD users, because it is for and because of them that NetBSD exists. SSoouurrcceess ooff NNeettBBSSDD _N_e_t_B_S_D _M_i_r_r_o_r _S_i_t_e _L_i_s_t The following sites mirror NetBSD as of April 03, 1999. If you wish to become a distribution site for NetBSD, contact _m_i_r_r_o_r_s_@_n_e_t_b_s_d_._o_r_g. FTP mirrors Australia ftp.au.netbsd.org RMIT University, Melbourne ftp://ftp.au.netbsd.org/pub/NetBSD/ ftp2.au.netbsd.org University of Queensland, Brisbane ftp://ftp2.au.netbsd.org/pub/NetBSD/ Austria ftp.at.netbsd.org University of Technology, Vienna ftp://ftp.at.netbsd.org/pub/NetBSD/ Brazil ftp.ravel.ufrj.br Cidade Universitaria ftp://ftp.ravel.ufrj.br/pub/NetBSD/ Denmark ftp.dk.netbsd.org Aalborg University ftp://ftp.dk.netbsd.org/pub/NetBSD/ Finland ftp.fi.netbsd.org The Finnish University and Research Network, Espoo ftp://ftp.fi.netbsd.org/pub/NetBSD/ France ftp.fr.netbsd.org Paris University ftp://ftp.fr.netbsd.org/pub/NetBSD/ Germany ftp.de.netbsd.org University of Trier ftp://ftp.de.netbsd.org/pub/NetBSD/ ftp2.de.netbsd.org University of Erlangen-Nuremberg ftp://ftp2.de.netbsd.org/pub/NetBSD/ ftp.uni-regensburg.de University of Regensburg ftp://ftp.uni-regensburg.de/pub/comp/os/NetBSD/ Japan ftp.jp.netbsd.org Internet Research Institute Inc., Tokyo ftp://ftp.jp.netbsd.org/pub/NetBSD/ core.ring.gr.jp Electrotechnical Laboratory ftp://core.ring.gr.jp/pub/NetBSD/ ftp.dti.ad.jp Dream Train Internet Inc., Tokyo ftp://ftp.dti.ad.jp/pub/NetBSD/ mirror.nucba.ac.jp Nagoya University of Commerce and Business ftp://mirror.nucba.ac.jp/mirror/NetBSD/ netbsd.tohoku.ac.jp Tohoku University, Sendai ftp://netbsd.tohoku.ac.jp/NetBSD/ ring.asahi-net.or.jp ASAHI Net ftp://ring.asahi-net.or.jp/pub/NetBSD/ Netherlands ftp.nl.netbsd.org University of Amsterdam ftp://ftp.nl.netbsd.org/pub/NetBSD/ Norway ftp.no.netbsd.org Bergen IT Consult AS ftp://ftp.no.netbsd.org/pub/NetBSD/ ftp.ntnu.no Norwegian University of Science and Technology ftp://ftp.ntnu.no/pub/NetBSD/ Russia ftp.ru.netbsd.org Landau Institute for Theoretical Physics, Chernogolovka ftp://ftp.ru.netbsd.org/pub/NetBSD/ Sweden ftp.stacken.kth.se Royal Institute of Technology, Stockholm ftp://ftp.stacken.kth.se/pub/OS/NetBSD/ ftp.sunet.se Swedish University NETwork, Uppsala ftp://ftp.sunet.se/pub/os/NetBSD/ UK ftp.uk.netbsd.org Domino, London ftp://ftp.uk.netbsd.org/pub/NetBSD/ sunsite.org.uk ftp://sunsite.org.uk/packages/netbsd/ USA ftp.netbsd.org Silicon Valley, California ftp://ftp.netbsd.org/pub/NetBSD/ ftp.cs.umn.edu University of Minnesota ftp://ftp.cs.umn.edu/pub/NetBSD ftp.eecs.umich.edu University of Michigan, Ann Arbor ftp://ftp.eecs.umich.edu/pub/NetBSD/ ftp.iastate.edu Iowa State University ftp://ftp.iastate.edu/pub/netbsd/ ftp.op.net ftp://ftp.op.net/pub/NetBSD/ AFS mirrors Sweden ftp.stacken.kth.se Royal Institute of Technology, Stockholm AFS path: /afs/stacken.kth.se/ftp/pub/OS/NetBSD USA ftp.iastate.edu Iowa State University AFS path: /afs/iastate.edu/public/ftp/pub/netbsd NFS mirrors UK sunsite.org.uk Instructions: mount -o ro sunsite.org.uk:/public/packages/netb- sd /mnt SUP mirrors Australia sup.au.netbsd.org RMIT University, Melbourne Instructions: ftp://sup.au.netbsd.org/pub/NetBSD/sup/README.sup France sup.fr.netbsd.org Paris University Instructions: Similar to sup.netbsd.org Germany sup.de.netbsd.org University of Trier Instructions: ftp://sup.de.netbsd.org/pub/NetBSD/sup/sup- file.example Japan sup.jp.netbsd.org Internet Research Institute Inc., Tokyo Instructions: ftp://sup.jp.netbsd.org/pub/NetBSD/sup/README.sup Norway sup.no.netbsd.org Norwegian University of Science and Technology Instructions: See /usr/src/share/examples/supfiles/sup.no.netb- sd.org UK sup.uk.netbsd.org Domino, London Instructions: See ftp://ftp.netbsd.org/pub/NetB- SD/sup/README.sup USA sup.netbsd.org Silicon Valley, California Instructions: See ftp://ftp.netbsd.org/pub/NetB- SD/sup/README.sup ftp.cs.umn.edu University of Minnesota Instructions: hostbase=/ftp/ftp/packages/NetBSD, collections are the same as on sup.NetBSD.ORG WWW mirrors Australia www.au.netbsd.org RMIT University, Melbourne http://www.au.netbsd.org/ Austria www.at.netbsd.org University of Technology, Vienna http://www.at.netbsd.org/ Finland www.fi.netbsd.org Global Wire Oy, Lappeenranta http://www.fi.netbsd.org/ France www.fr.netbsd.org Paris University http://www.fr.netbsd.org/ Germany www.de.netbsd.org http://www.de.netbsd.org/ Japan www.jp.netbsd.org Internet Research Institute Inc., Tokyo http://www.jp.netbsd.org/ Norway www.no.netbsd.org Bergen IT Consult AS http://www.no.netbsd.org/ USA www.netbsd.org Western Washington State University http://www.netbsd.org/ www2.us.netbsd.org New York http://www.us.netbsd.org/ NNeettBBSSDD 11..44 RReelleeaassee CCoonntteennttss The root directory of the NetBSD 1.4 release is organized as follows: _._._._/_N_e_t_B_S_D_-_1_._4_/ BUGS Known bugs list (somewhat incomplete and out of date). CHANGES Changes since earlier NetBSD releases. LAST_MINUTE Last minute changes. MIRRORS A list of sites that mirror the NetBSD 1.4 distribution. README.files README describing the distribution's contents. TODO NetBSD's todo list (also somewhat incomplete and out of date). patches/ Post-release source code patches. source/ Source distribution sets; see below. In addition to the files and directories listed above, there is one di- rectory per architecture, for each of the architectures for which NetBSD 1.4 has a binary distribution. There are also 'README.export-con- trol' files sprinkled liberally throughout the distribution tree, which point out that there are some portions of the distribution (i.e. the `do- mestic' portion) that may be subject to export regulations of the United States. It is your responsibility to determine whether or not it is le- gal for you to export these portions and to act accordingly. The source distribution sets can be found in subdirectories of the "source" subdirectory of the distribution tree. They contain the complete sources to the system. The source distribution sets are as follows: secrsrc.tgz: This set contains the "domestic" sources. These sources may be subject to United States export regulations. _4_2_1_K _g_z_i_p_p_e_d_, _2_M _u_n_c_o_m_p_r_e_s_s_e_d gnusrc.tgz: This set contains the "gnu" sources, including the source for the compiler, assembler, groff, and the other GNU utilities in the binary distribution sets. _1_9_M _g_z_i_p_p_e_d_, _8_4_._2_M _u_n_c_o_m_p_r_e_s_s_e_d syssrc.tgz: This set contains the sources to the NetBSD 1.4 kernel, config(8), and dbsym(8). _1_3_._5_M _g_z_i_p_p_e_d_, _6_6_._7_M _u_n_c_o_m_p_r_e_s_s_e_d sharesrc.tgz: This set contains the "share" sources, which include the sources for the man pages not associated with any par- ticular program, the sources for the typesettable docu- ment set, the dictionaries, and more. _3_M _g_z_i_p_p_e_d_, _1_1_._9_M _u_n_c_o_m_p_r_e_s_s_e_d src.tgz: This set contains all of the NetBSD 1.4 sources which are not mentioned above. _1_6_._1_M _g_z_i_p_p_e_d_, _7_3_._6_M _u_n_c_o_m_p_r_e_s_s_e_d Most of the above source sets are located in the _s_o_u_r_c_e_/_s_e_t_s subdirectory of the distribution tree. The secrsrc.tgz set is contained in the _s_o_u_r_c_e_/_s_e_c_u_r_i_t_y subdirectory. This set, which is available only to users in the United States and Canada, contains the sources normally found in _/_u_s_r_/_s_r_c_/_d_o_m_e_s_t_i_c - primarily kerberos and other cryptographic security related software. (Remember, because of United States law, it may not be legal to distribute this set to locations outside of the United States and Canada.) The source sets are distributed as compressed tar files. They may be un- packed into _/_u_s_r_/_s_r_c with the command: ccaatt sseett__nnaammee..ttggzz || gguunnzziipp || ((ccdd //;; ttaarr xxppff -- )) The _s_e_t_s_/_S_p_l_i_t_/ and _s_e_c_u_r_i_t_y_/_S_p_l_i_t_/ subdirectories contain split versions of the source sets for those users who need to load the source sets from floppy or otherwise need a split distribution. The split sets are are named "set_name.xx" where "set_name" is the distribution set name, and "xx" is the sequence number of the file, starting with "aa" for the first file in the distribution set, then "ab" for the next, and so on. All of these files except the last one of each set should be exactly 240,640 bytes long. (The last file is just long enough to contain the remainder of the data for that distribution set.) The split distributions may be reassembled and extracted with ccaatt as follows: ccaatt sseett__nnaammee..???? || gguunnzziipp || ((ccdd //;; ttaarr xxppff -- )) In each of the source distribution set directories, there is a file named _C_K_S_U_M_S which contains the checksums of the files in that directory, as generated by the cksum(1) utility. You can use cksum to check the in- tegrity of the archives, if you suspect that one of the files is corrupt and have access to a cksum binary. Checksums based on other algorithms may also be present - see the release(7) man page for details. _N_e_t_B_S_D_/_x_6_8_k _S_u_b_d_i_r_e_c_t_o_r_y _S_t_r_u_c_t_u_r_e The x68k-specific portion of the NetBSD 1.4 release is found in the _x_6_8_k subdirectory of the distribution: _._._._/_N_e_t_B_S_D_-_1_._4_/_x_6_8_k_/ _I_N_S_T_A_L_L_._h_t_m_l _I_N_S_T_A_L_L_._p_s _I_N_S_T_A_L_L_._t_x_t _I_N_S_T_A_L_L_._m_o_r_e Installation notes; this file. The _._m_o_r_e file contains underlined text using the more(1) conventions for indicat- ing italic and bold display. _b_i_n_a_r_y_/ _s_e_t_s_/ x68k binary distribution sets; see below. _s_e_c_u_r_i_t_y_/ x68k security distribution; see below. _i_n_s_t_a_l_l_a_t_i_o_n_/ _f_l_o_p_p_y_/ x68k boot and installation floppies; see below. _m_i_s_c_/ Miscellaneous x68k installation utilities which run on Human68k; see installation section, below. _B_i_n_a_r_y _D_i_s_t_r_i_b_u_t_i_o_n _S_e_t_s The NetBSD x68k binary distribution sets contain the binaries which com- prise the NetBSD 1.4 release for the x68k. There are eight binary distri- bution sets and the _s_e_c_u_r_i_t_y distribution set. The binary distribution sets can be found in the _x_6_8_k_/_b_i_n_a_r_y_/_s_e_t_s subdirectory of the NetBSD 1.4 distribution tree, and are as follows: bbaassee The NetBSD 1.4 x68k bbaassee binary distribution. You _m_u_s_t in- stall this distribution set. It contains the base NetBSD utilities that are necessary for the system to run and be minimally functional. It includes shared library support, and excludes everything described below. _1_0_._2_M _g_z_i_p_p_e_d_, _2_8_._8_M _u_n_c_o_m_p_r_e_s_s_e_d ccoommpp Things needed for compiling programs. This set includes the system include files (_/_u_s_r_/_i_n_c_l_u_d_e) and the various system libraries (except the shared libraries, which are included as part of the bbaassee set). This set also includes the manual pages for all of the utilities it contains, as well as the system call and library manual pages. _8_._1_M _g_z_i_p_p_e_d_, _2_7_._3_M _u_n_c_o_m_p_r_e_s_s_e_d eettcc This distribution set contains the system configuration files that reside in _/_e_t_c and in several other places. This set _m_u_s_t be installed if you are installing the system from scratch, but should _n_o_t be used if you are upgrading. (If you are upgrading, it's recommended that you get a copy of this set and _c_a_r_e_f_u_l_l_y upgrade your configuration files by hand.) _5_7_K _g_z_i_p_p_e_d_, _3_4_0_K _u_n_c_o_m_p_r_e_s_s_e_d ggaammeess This set includes the games and their manual pages. _2_._8_M _g_z_i_p_p_e_d_, _7_M _u_n_c_o_m_p_r_e_s_s_e_d kkeerrnn This set contains a NetBSD/x68k 1.4 GENERIC kernel, named _/_n_e_t_b_s_d. You _m_u_s_t install this distribution set. _6_2_7_k _g_z_i_p_p_e_d_, _1_._4_M _u_n_c_o_m_p_r_e_s_s_e_d mmaann This set includes all of the manual pages for the binaries and other software contained in the bbaassee set. Note that it does not include any of the manual pages that are included in the other sets. _4_M _g_z_i_p_p_e_d_, _1_5_._9_M _u_n_c_o_m_p_r_e_s_s_e_d mmiisscc This set includes the (rather large) system dictionaries, the typesettable document set, and other files from _/_u_s_r_/_s_h_a_r_e. _2_._2_M _g_z_i_p_p_e_d_, _8_._4_M _u_n_c_o_m_p_r_e_s_s_e_d tteexxtt This set includes NetBSD's text processing tools, including groff(1), all related programs, and their manual pages. _1_._3_M _g_z_i_p_p_e_d_, _4_._5_M _u_n_c_o_m_p_r_e_s_s_e_d The x68k security distribution set is named sseeccrr and can be found in the _x_6_8_k_/_b_i_n_a_r_y_/_s_e_c_u_r_i_t_y subdirectory of the NetBSD 1.4 distribution tree. It contains security- related binaries which depend on cryptographic source code. You do not need this distribution set to use encrypted passwords in your password file; the bbaassee distribution includes a crypt library which can perform only the one-way encryption function. The security distribution includes a version of the Kerberos IV network security system, and a Kerberized version of telnet(1) program. The sseeccrr distribution set can be found only on those sites which carry the complete NetBSD distribution and which can legally obtain it. Because of United States law, it may not be legal to distribute this set to locations outside of the United States and Canada. NetBSD maintains its own set of sources for the X Window System in order to assure tight integration and compatibility. These sources are based on XFree86, and tightly track XFree86 releases. They are currently equivalent to XFree86 3.3.3.1. Binary sets for the X Window system are distributed with NetBSD. The sets are: xxbbaassee The basic files needed for a complete X client environment. This does not include the X servers. _2_._4_M _g_z_i_p_p_e_e_d_, _7_._7_M _u_n_c_o_m_p_r_e_s_s_e_d xxccoommpp The extra libraries and include files needed to compile X source code. _1_._6_M _g_z_i_p_p_e_d_, _6_._8_M _u_n_c_o_m_p_r_e_s_s_e_d xxccoonnttrriibb Programs that were contributed to X. _1_7_9_k _g_z_i_p_p_e_d_, _6_7_0_k _u_n_c_o_m_p_r_e_s_s_e_d xxffoonntt Fonts needed by X. _5_._7_M _g_z_i_p_p_e_d_, _7_._0_M _u_n_c_o_m_p_r_e_s_s_e_d xxsseerrvveerr The X68k and Xprt servers with man pages and the runtime configuration file. _1_._4_M _g_z_i_p_p_e_d_, _3_._4_M _u_n_c_o_m_p_r_e_s_s_e_d The x68k binary distribution sets are distributed as gzipped tar files named with the extension ..ttggzz, e.g. _b_a_s_e_._t_g_z. The instructions given for extracting the source sets work equally well for the binary sets, but it is worth noting that if you use that method, the files are /-relative and therefore are extracted _b_e_l_o_w the current directory. That is, if you want to extract the binaries into your system, i.e. replace the system binaries with them, you have to run the ttaarr xxffpp command from /. _N_o_t_e Each directory in the x68k binary distribution also has its own checksum files, just as the source distribution does: All BSDSUM files are historic BSD checksums for the various files in that directory, in the format produced by the command: cckkssuumm --oo 11 _f_i_l_e All CKSUM files are POSIX checksums for the various files in that directory, in the format produced by the command: cckkssuumm _f_i_l_e. All MD5 files are MD5 digests for the various files in that direc- tory, in the format produced by the command: cckkssuumm --mm _f_i_l_e. All SYSVSUM files are historic AT&T System V UNIX checksums for the various files in that directory, in the format produced by the command: cckkssuumm --oo --22 _f_i_l_e. The MD5 digest is the safest checksum, followed by the POSIX checksum. The other two checksums are provided only to ensure that the widest possible range of system can check the integrity of the release files. NNeettBBSSDD//xx6688kk SSyysstteemm RReeqquuiirreemmeennttss aanndd SSuuppppoorrtteedd DDeevviicceess NetBSD/x68k 1.4 runs on the Sharp X68030 series PCs with a _t_r_u_e MC68030 MPU (not the original MC68EC030) and an FPU. Since the processor of the X68030 series is the MC68EC030, you need to replace it with an MC68030. Simply remove the old chip and put in the new one instead. The largest difficulty might be to open your X68030. In addition, some accelerators are supported: ++oo Xellent30 series ++oo 040turbo ++oo Jupiter-X (040 / 060) ++oo 060turbo This means all models of X680x0 series PC except for CZ-600C and CZ-674C, by using the appropriate accelerator, can run NetBSD!! Note that the processor for the Xellent30 series is MC68EC030, so you need to replace your processor as well as for X68030. For 68030 systems, MC68881 or MC68882 FPCP is *REQUIRED* as of this ver- sion. FPU emulator, which is supported on some other ports such as mac68k, is broken, and will be supported in the future releases. The minimal configuration requires 4M of RAM and about 100M of disk space. To install the entire system requires much more disk space, and to run X or compile the system, more RAM is recommended. Here is a table of recommended HD partition sizes for a full install: Partition Advised With X Needed With X root (/) 25M 25M 20M 20M user (/usr) 150M 200M 100M 125M swap 2*RAM... local (/local) up to you... As you may note the recommended size of /usr is 70M greater than needed. This is to leave room for a kernel source and compile tree as you will probably want to compile your own kernel. (ALL is large and bulky to ac- commodate all people). Supported devices include: ++oo Sharp genuine SCSI interface (builtin / optional) * SCSI hard- disks, CD-ROM drives, tape drives, scanners,... ++oo Mankai Seisakusho Mach-2 SCSI interface ++oo The builtin floppy drives ++oo The builtin frame buffer (both of the text and graphics screen) ++oo The builtin serial (RS-232C) ++oo The builtin parallel (Centronics printer interface) ++oo The standard keyboard ++oo The mouse / trackball ++oo NS16550 serial ++oo Neptune-X ethernet Hopefully, the AD-PCM sound device will be supported on the future re- leases. GGeettttiinngg tthhee NNeettBBSSDD SSyysstteemm oonn ttoo UUsseeffuull MMeeddiiaa Installation is supported from several media types, including: ++oo Removable SCSI hard disk, or Magneto-Optical disk (MO) ++oo Tape ++oo Remote NFS partition ++oo FTP You'll need to have a install floppy disk. On the first, you'll put the install floppy image. If you are using a UN*X-like system to write the floppy images to disks, you should use the _d_d command to copy the file system images (.fs files) directly to the raw floppy disks. It is suggested that you read the dd(1) manual page or ask your system administrator to determine the correct set of arguments to use; it will be slightly different from system to system, and a comprehensive list of the possibilities is beyond the scope of this document. If you are using Human68k to write the floppy images to disks, you should use the _r_a_w_r_i_t_e utility, provided in the _i_n_s_t_a_l_l_a_t_i_o_n_/_m_i_s_c directory of the NetBSD distribution. It will write the file system images (.fs files) to disks. If you can retrieve _l_o_a_d_b_s_d_._x utility and _n_e_t_b_s_d_._I_N_S_T_A_L_L file which can be found in _i_n_s_t_a_l_l_a_t_i_o_n_/_m_i_s_c directory into your Human68k disk, you can run installation kernel without preparing the special boot floppy. Sim- ply type: llooaaddbbssdd nneettbbssdd..IINNSSTTAALLLL from the Human68k command line, then NetBSD will start the installation sequence. Obviously, the steps necessary to prepare the distribution sets for in- stallation or upgrade depend on which installation medium you choose. The steps for the various media are outlined below. _I_n_s_t_a_l_l _F_r_o_m _R_e_m_o_v_a_b_l_e _S_C_S_I _H_a_r_d _D_i_s_k _o_r _M_O To install NetBSD from a removable device the media _m_u_s_t be of the IBM _S_u_p_e_r_-_f_l_o_p_p_y format. The Human68k format is not recog- nized by this release of the NetBSD/x68k. If you have a MS-DOS (or MS-Windows) machine with an MO drive connected, use it. If you don't, and if you have a program to handle IBM format MO for Human68k, copy all the files in the subdirectory _x_6_8_k_/_b_i_n_a_r_i_e_s and CHANGE THEIR NAMES IN UPPER CASE. _I_n_s_t_a_l_l _F_r_o_m _T_a_p_e To install or upgrade NetBSD using a tape, you need to do the following: To install NetBSD from a tape, you need to make a tape that con- tains the distribution set files, in "tar" format. If you're mak- ing the tape on a UN*X-like system, the easiest way to do so is probably something like: ttaarr ccff _t_a_p_e___d_e_v_i_c_e _d_i_s_t___d_i_r_e_c_t_o_r_i_e_s where _t_a_p_e___d_e_v_i_c_e is the name of the tape device that describes the tape drive you're using (possibly /dev/rst0, or something similar, but it will vary from system to system. (If you can't figure it out, ask your system administrator.) In the above ex- ample, _d_i_s_t___d_i_r_e_c_t_o_r_i_e_s are the distribution sets' directories, for the distribution sets you wish to place on the tape. For in- stance, to put the bbaassee and eettcc distributions on tape (in order to do the absolute minimum installation to a new disk), you would do the following: ccdd ......//NNeettBBSSDD--11..44 ## tthhee ttoopp ooff tthhee ttrreeee ccdd xx6688kk//bbiinnaarryy//sseettss ttaarr ccff _t_a_p_e___d_e_v_i_c_e bbaassee..ttggzz eettcc..ttggzz (Note that you still need to fill in _t_a_p_e___d_e_v_i_c_e in the example.) Once you have the files on the tape, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go di- rectly to the section on upgrading. _I_n_s_t_a_l_l _F_r_o_m _R_e_m_o_t_e _N_F_S _P_a_r_t_i_t_i_o_n To install or upgrade NetBSD using a remote partition, mounted via NFS, you must do the following: _N_o_t_e This method of installation is recommended only for those already familiar with using BSD network configuration and management commands. If you aren't, this documentation should help, but is not intended to be all-encompassing. Place the NetBSD distribution sets you wish to install into a di- rectory on an NFS server, and make that directory mountable by the machine on which you are installing or upgrading NetBSD. This will probably require modifying the /etc/exports file on of the NFS server and resetting its mount daemon (mountd). (Both of these actions will probably require superuser privileges on the server.) You need to know the the numeric IP address of the NFS server, and, if the server is not on a network directly connected to the machine on which you're installing or upgrading NetBSD, you need to know the numeric IP address of the router closest to the NetB- SD machine. Finally, you need to know the numeric IP address of the NetBSD machine itself. Once the NFS server is set up properly and you have the informa- tion mentioned above, you can proceed to the next step in the in- stallation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading. _I_n_s_t_a_l_l _v_i_a _F_T_P To install or upgrade NetBSD by using FTP to get the installation sets, you must do the following: _N_o_t_e This method of installation is recommended only for those already familiar with using BSD network configuration and management commands. If you aren't, this documentation should help, but is not intended to be all-encompassing. The preparations for this installation/upgrade method are easy; all you make sure that there's some FTP site from which you can retrieve the NetBSD distribution when you're about to install or upgrade. You need to know the numeric IP address of that site, and, if it's not on a network directly connected to the machine on which you're installing or upgrading NetBSD, you need to know the numeric IP address of the router closest to the NetBSD ma- chine. Finally, you need to know the numeric IP address of the NetBSD machine itself. Once you have this information, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go di- rectly to the section on upgrading. If you are upgrading NetBSD, you also have the option of installing NetB- SD by putting the new distribution sets somewhere in your existing file system, and using them from there. To do that, you must do the following: 1. Place the distribution sets you wish to upgrade somewhere in your current file system tree. At a bare minimum, you must upgrade the "base" binary distribution, and so must put the "base.tgz" set some- where in your file system. If you wish, you can do the other sets, as well, but you should NOT upgrade the "etc" distribution; the "etc" distribution contains system configuration files that you should review and update by hand. 2. Once you have done this, you can proceed to the next step in the up- grade process, actually upgrading your system. PPrreeppaarriinngg yyoouurr SSyysstteemm ffoorr NNeettBBSSDD IInnssttaallllaattiioonn _N_o_t_e Currently NetBSD/x68k requires a dedicated disk when you install it for the first time. In other words NetBSD/x68k cannot be in- stalled on the hard disk on which Human68k or any other operating systems reside. This is because of the poor installer, and the system itself can share a single disk with other OSs. This prob- lem should be fixed in the next release. What you have to do to prepare the disk is only to physically format your hard disk by using FORMAT.x utility of Human68k to install the master boot program on your disk. You can now proceed with the installation in- structions. IInnssttaalllliinngg tthhee NNeettBBSSDD SSyysstteemm Installing NetBSD is a relatively complex process, but if you have this document in hand and are careful to read and remember the information which is presented to you by the install program, it shouldn't be too much trouble. Before you begin, you should know the geometry of your hard disk, i.e. the sector size (note that sector sizes other than 512 bytes are not cur- rently supported), the number of sectors per track, the number of tracks per cylinder (also known as the number of heads), and the number of cylinders on the disk. The NetBSD kernel will try to discover these pa- rameters on its own, and if it can it will print them at boot time. If possible, you should use the parameters it prints. (You might not be able to because you're sharing your disk with another operating system, or because your disk is old enough that the kernel can't figure out its geometry.) You should now be ready to install NetBSD. It might be handy for you to have a pencil, some paper, and a calculator handy. The following is a walk-through of the steps you will take while getting NetBSD installed on your hard disk. If any question has a default answer, it will be displayed in brackets ("[]") after the question. If you wish to stop the installation, you may hit Control-C at any time, but if you do, you'll have to begin the installation process again from scratch. 1. Boot your machine using of boot floppy. If the boot prompt does not appear in a reasonable amount of time, you either have a bad boot floppy or a hardware problem. Try writing the boot floppy image to a different disk, and using that. If it still doesn't work, NetBSD probably can't be run on your hardware. This can probably be consid- ered a bug, so you might want to report it. If you do, please in- clude as many details about your system configuration as you can. It will take a while to load the kernel from the floppy, probably around a minute or so. 2. You will then be presented with the NetBSD kernel boot messages. You will want to read them, to determine your disk's name and geometry. Its name will be something like "sd0" and the geometry will be printed on a line that begins with its name. As mentioned above, you will need your disk's geometry when creating NetBSD's partitions. You will also need to know the name, to tell the install tools what disk to install on. 3. You will be presented with a welcome message and a prompt asking whether you are going to "install" NetBSD or "upgrade" an exisiting system. Select "install" to start installation. 4. You will be presented a prompt asking if you wish to proceed with the installation process. If you wish to proceed, enter "y" and hit return. 5. The install program will then tell you which disks it can install on, and ask you which it should use. Reply with the name of your disk. 6. You will then be asked to name your disk's disklabel. The default response is "mysd", and for most purposes it will be OK. If you choose to name it something different, make sure the name is a sin- gle word and contains no special characters. You don't need to re- member this name. 7. You will be prompted for your disk's geometry information, i.e. the number of bytes per sector, cylinders on the disk, tracks per cylin- der (heads), and sectors per track. Enter them when they are re- quested. If you make a mistake, hit Control-C and when you get to the shell prompt, restart the install process by running the "in- stall" command. Once you have entered this data, the install program will tell you the total size of your disk, in both sectors, and cylinders. Remember this number; if you're installing on the whole disk, you'll need it again soon. 8. When describing your partitions, you will have the option of enter- ing data about them in units of disk sectors or cylinders. If you choose to enter the information in units of sectors, remember that, for optimal performance, partitions should begin and end on cylinder boundaries. You will be asked about which units you wish to use, and you should reply with "c" for cylinders, or "s" for sectors. 9. You will be asked to enter the size of your NetBSD root partition. It should be at least 20M, but if you are going to be doing develop- ment, 25M is a more desirable size. This size should be expressed in units of sectors or cylinders, depending on which you said you want- ed to use. 10. Next, you will be asked for the size of your swap partition. You should probably allocate twice as much swap space as you have real memory. Systems that will be heavily used should have more swap space allocated, and systems that will be lightly used can get by with less. If you want the system to be able to save crash dumps when it panics, you will need at least as much swap space as you have RAM. Again, this number should be expressed in units of sectors or cylinders, as appropriate. 11. The install program will then ask you for information about the rest of the partitions you want on your disk. For most purposes, you will want only one more partition, "/usr". (Machines used as servers will probably also want /var as a separate partition. That can be done with these installation tools, but is not covered here.) The install program will tell you how much space there is left to be al- located in the NetBSD area of the disk, and, if you only want one more partition ("/usr"), you should enter it at the prompt when the installer asks you how large the next partition should be. It will then ask you for the name of the mount point for that partition. If you're doing a basic installation, that is "/usr". 12. _Y_o_u _a_r_e _n_o_w _a_t _t_h_e _p_o_i_n_t _o_f _n_o _r_e_t_u_r_n. Nothing has been written to your disk yet, but if you confirm that you want to install NetBSD, your hard drive will be modified, and its contents may be scrambled at the whim of the install program. This is especially likely if you have given the install program incorrect information. If you are sure you want to proceed, enter "yes" at the prompt. 13. The install program will now label your disk and make the file sys- tems you specified. The filesystems will be initialized to contain NetBSD bootstrapping binaries and configuration files. It will also create an /etc/fstab for your system, and mount all of the file sys- tems under /mnt. (In other words, your root partition will be mount- ed on /mnt, your /usr partition on /mnt/usr, and so on.) There should be no errors in this section of the installation. If there are, restart from the beginning of the installation process. 14. You will be placed at a shell prompt ("#"). The remaining tasks are to copy the kernel from the kernel copy floppy to the hard drive's root filesystem and install the distribution sets. The flow of in- stallation differs depending on your hardware resources, and on what media the distribution sets reside. _T_o _i_n_s_t_a_l_l _f_r_o_m _r_e_m_o_v_a_b_l_e _h_a_r_d _d_i_s_k The first thing you should do is pick a temporary directory where the distribution files can be stored. To do this, enter the com- mand "Set_tmp_dir", and enter the name of the temporary directo- ry. (Don't forget that your disk is mounted under _/_m_n_t; you should probably pick a directory under _/_m_n_t_/_u_s_r.) The default is /mnt/usr/distrib. Insert the media onto the drive. Check the device name of your drive from the boot message. The device name is something like "sd2" depending on the SCSI disk drives connected to your ma- chine. Note that the boot message can be displayed with the com- mand mmoorree //kkeerrnn//mmssggbbuuff. Mount the disk on the temporary directory with a command like: mmoouunntt --tt mmssddooss //ddeevv//ssdd22cc _t_m_p___d_i_r if your removable drive's name is sd2. Run the EExxttrraacctt command once for each distribution set you wish to install. For instance, if you wish to install the bbaassee distri- bution set, followed by the kkeerrnn distribution set, and finally the eettcc distribution set, use the commands: EExxttrraacctt bbaassee EExxttrraacctt kkeerrnn EExxttrraacctt eettcc For each extraction, it will ask you if the extraction should be verbose. If you reply affirmatively, it will print out the name of each file that's being extracted. _T_o _i_n_s_t_a_l_l _f_r_o_m _f_l_o_p_p_y The first thing you should do is pick a temporary directory where the distribution files can be stored. To do this, enter the com- mand SSeett__ttmmpp__ddiirr, and enter the name of the temporary directory. (Don't forget that if your disk is still mounted under /mnt; you should probably pick a directory under /mnt/usr.) After you have picked a temporary directory, enter the LLooaadd__ffdd command, to load the distribution sets from your floppies. You will be asked which floppy drive to use. Enter "0" (zero) if you're using the first floppy drive (i.e. what DOS would call "A:"), or enter "1" if you're using the second. You will be prompted to insert a floppy into the drive, to have its contents copied to your hard disk. Do so, and hit return to begin copying. When that is done, read the remainder of the flop- pies that contain the distribution sets that you want to install, one by one. When the last is read, and you are being prompted for another, hit Control-C. Run the "Extract" command once for each distribution set you wish to install. For instance, if you wish to install the "base" dis- tribution set, followed by the "kern" distribution set, and fi- nally the "etc" distribution set, use the commands: EExxttrraacctt bbaassee EExxttrraacctt kkeerrnn EExxttrraacctt eettcc For each extraction, it will ask you if the extraction should be verbose. If you reply affirmatively, it will print out the name of each file that's being extracted. _N_o_t_e If you know that you will be running low on disk space when installing NetBSD, you can load and extract one dis- tribution set at a time. To do this, load only the flop- pies which contain the files for the first distribution set, extract them, and then change to the temporary direc- tory and remove them with the command "rm set_name.??". Once you are finished extracting all of the sets that you wish to install, you should proceed to the instructions below (after the last install medium type-specific instructions), that explain how you should configure your system. _T_o _i_n_s_t_a_l_l _f_r_o_m _t_a_p_e The first thing you should do is pick a temporary directory where the distribution files can be stored. To do this, enter the com- mand "Set_tmp_dir", and enter the name of the temporary directo- ry. (Don't forget that your disk is mounted under /mnt; you should probably pick a directory under /mnt/usr.) The default is /mnt/usr/distrib. After you have picked a temporary directory, enter the "Load_tape" command, to load the distribution sets from tape. You will be asked which tape drive to use. The default is "rst0", which is correct if you're using the SCSI tape drive with the lowest SCSI ID number. (For the SCSI tape drive with the next lowest SCSI ID number, you should use "rst1", and so on.) You will be prompted to hit return when you have inserted the tape into the tape drive. When you do, the contents of the tape will be extracted into the temporary directory, and the names of the files being extracted will be printed. After the tape has been extracted, to go the directory containing the first distribution set you wish to install. (Depending on how you made the tape, it's probably a subdirectory of the temporary directory you specified above.) Once there, run the "Set_tmp_dir" command again, and accept its default answer by hitting return at the prompt. Use the EExxttrraacctt command to extract the distribution set. For in- stance, if you're extracting the "base" set, use the command: EExxttrraacctt bbaassee You will be asked if you wish the extraction to be verbose. If you reply affirmatively, the name of each file being extracted will be printed. Repeat the previous two steps for each distribution set you wish to install. Change to the set's directory, run "Set_tmp_dir", and then run EExxttrraacctt _s_e_t___n_a_m_e to extract the set. Once you are finished extracting all of the sets that you wish to install, you should proceed to the instructions below (after the last install medium type-specific instructions), that explain how you should configure your system. _T_o _i_n_s_t_a_l_l _v_i_a _F_T_P _o_r _N_F_S The first thing you should do is pick a temporary directory where the distribution files can be stored. To do this, enter the com- mand "Set_tmp_dir", and enter the name of the temporary directo- ry. (Don't forget that your disk is mounted under _/_m_n_t; you should probably pick a directory under _/_m_n_t_/_u_s_r.) The default is _/_m_n_t_/_u_s_r_/_d_i_s_t_r_i_b. Configure the network interface. To use SLIP, type the following command sequence: ssllaattttaacchh --hh --ss _s_p_e_e_d ttttyy0000 iiffccoonnffiigg ssll00 _m_y___i_p_a_d_d_r _p_e_e_r___i_p_a_d_d_r where _s_p_e_e_d is the network speed, and _m_y___i_p_a_d_d_r is the numeric IP address of the machine you are going to install NetBSD/x68k, while _p_e_e_r___i_p_a_d_d_r is the address of the peer machine connected with your machine. You might have to configure the peer SLIP in- terface with similar sequence (depending on the peer system). For instance, the sequence ssllaattttaacchh --hh --ss 3388440000 ttttyy0000 iiffccoonnffiigg ssll00 119922..116688..00..11 119922..116688..00..1100 configures the SLIP interface for the network between your ma- chine (with IP address 192.168.0.1) and the peer (192.168.0.10) with speed 38400 bps. Note that IP addresses 192.168.*.* are the private IP addresses described in RFC 1597. To use ethernet, do following: iiffccoonnffiigg nnee00 _m_y___i_p_a_d_d_r where _m_y___i_p_a_d_d_r is the numeric IP address of the machine you are going to install NetBSD/x68k. ne0 is the interface name which correspond to the Neptune-X or clone. If you are NFS-mounting the distribution sets, mount them on the temporary directory with a command like: mount -t nfs _s_e_r_v___i_p_a_d_d_r_:_d_i_s_t___d_i_r _t_m_p___d_i_r where _s_e_r_v___i_p_a_d_d_r is the server's numeric IP address, _d_i_s_t___d_i_r is the path to the distribution files on the server, and _t_m_p___d_i_r is the name of the local temporary directory. Once this is done, proceed as if you had loaded the files from tape, changing to the appropriate directories, running SSeett__ttmmpp__ddiirr and running EExxttrraacctt as appropriate. If you are retrieving the distribution sets using ftp, change in- to the temporary directory, and execute the command: ffttpp _s_e_r_v___i_p_a_d_d_r where _s_e_r_v___i_p_a_d_d_r is once again the server's numeric IP address. Get the files with FTP, taking care to use binary mode when transferring the files. Once you have all of the files for the distribution sets that you wish to install, you can proceed using the instructions above, as if you had installed from a floppy. _N_o_t_e As with the floppy install, if you're short on disk space, you can transfer only one set at a time, extract it, and then delete it in order to save space.) Once you have finished extracting all of the distribution sets that you wish to install, and are back at the "#" prompt, you are ready to configure your system. The configuration utility expects that you have installed the "base" and "etc" distribution sets. If you have not, you will not be able to run it successfully (nor will you have a functional system, in any case). To configure your newly-installed NetBSD system, run the command "Configure". It will ask you for the system's host name, domain name, and other network configuration information. It will set up your configuration files and make the device nodes for the newly-in- stalled system. Congratulations, you have successfully installed NetBSD 1.4. When you re- boot into NetBSD, you should log in as "root" at the login prompt. There is no initial password, but if you're using the machine in a networked environment, you should create yourself an account and protect it and the "root" account with good passwords. Some of the files in the NetBSD 1.4 distribution might need to be tai- lored for your site. In particular, the _/_e_t_c_/_s_e_n_d_m_a_i_l_._c_f file will almost definitely need to be adjusted, and other files in _/_e_t_c including _/_e_t_c_/_r_c_._c_o_n_f will probably need to be modified, as well. If you are unfa- miliar with UN*X-like system administration, it's recommended that you buy a book that discusses it. PPoosstt iinnssttaallllaattiioonn sstteeppss Once you've got the operating system running, there are a few things you need to do in order to bring the system into a propperly configured state, with the most important ones described below. 1. Configuring _/_e_t_c_/_r_c_._c_o_n_f If you haven't done any configuration of _/_e_t_c_/_r_c_._c_o_n_f, the system will drop you into single user mode on first reboot with the message /etc/rc.conf is not configured. Multiuser boot aborted. and with the root filesystem mounted read-write. When the system asks you to choose a shell, simply hit return to get to a prompt. If you are asked for a terminal type, respond with vvtt222200 (or whatever is appropriate for your terminal type) and hit return. At this point, you need to configure at least one file in the _/_e_t_c directory. Change to the _/_e_t_c directory and take a look at the _/_e_t_c_/_r_c_._c_o_n_f file. Modify it to your tastes, making sure that you set rc_configured=YES so that your changes will be enabled and a multi-user boot can proceed. If your _/_u_s_r directory is on a separate partition and you do not know how to use 'ed' or 'ex', you will have to mount your _/_u_s_r partition to gain access to 'vi'. Do the follow- ing: mmoouunntt //uussrr eexxppoorrtt TTEERRMM==vvtt222200 If you have _/_v_a_r on a seperate partition, you need to repeat that step for it. After that, you can edit _/_e_t_c_/_r_c_._c_o_n_f with vi(1). When you have finished, type eexxiitt at the prompt to leave the single-user shell and continue with the multi-user boot. Other values that need to be set in _/_e_t_c_/_r_c_._c_o_n_f for a networked en- vironment are _h_o_s_t_n_a_m_e and possibly _d_e_f_a_u_l_t_r_o_u_t_e, furthermore add an _i_f_c_o_n_f_i_g___i_n_t for your interface , along the lines of ifconfig_de0="inet 123.45.67.89 netmask 255.255.255.0" or, if you have _m_y_n_a_m_e_._m_y_._d_o_m in _/_e_t_c_/_h_o_s_t_s: ifconfig_de0="inet myname.my.dom netmask 255.255.255.0" To enable proper hostname resolution, you will also want to add an _/_e_t_c_/_r_e_s_o_l_v_._c_o_n_f file or (if you are feeling a little more adventur- ous) run named(8). See resolv.conf(5) or named(8) for more informa- tion. Other files in _/_e_t_c that are new to NetBSD 1.4 and may require modi- fication or setting up include _/_e_t_c_/_m_a_i_l_e_r_._c_o_n_f, _/_e_t_c_/_n_s_s_w_i_t_c_h_._c_o_n_f and _/_e_t_c_/_w_s_c_o_n_s_._c_o_n_f. 2. Logging in After reboot, you can log in as root at the login prompt. There is no initial password, but if you're using the machine in a networked environment, you should create an account for yourself (see below) and protect it and the "root" account with good passwords. 3. Adding accounts Use the vipw(8) command to add accounts to your system, _d_o _n_o_t edit _/_e_t_c_/_p_a_s_s_w_d directly. See adduser(8) for more information on the process of how to add a new user to the system. 4. The X Window System If you have installed the X window system, look at the files in _/_u_s_r_/_X_1_1_R_6_/_l_i_b_/_X_1_1_/_d_o_c for information. Don't forget to add _/_u_s_r_/_X_1_1_R_6_/_b_i_n to your path in your shell's dot file so that you have access to the X binaries. 5. Installing 3rd party packages There is a lot of software freely available for Unix-based systems, almost all of which can run on NetBSD. Modifications are usually needed to when transferring programs between different Unix-like systems, so the NetBSD packages collection incorporates any such changes necessary to make that software run on NetBSD, and makes the installation (and deinstallation) of the software packages easy. There's also the option of building a package from source, in case there's no precompiled binary available. Precompiled binaries can be found at ffttpp::////ffttpp..nneettbbssdd..oorrgg//ppuubb//NNeettBBSSDD//ppaacckkaaggeess// Package sources for compiling packages can be obtained by retrieving the file ffttpp::////ffttpp..nneettbbssdd..oorrgg//ppuubb//NNeettBBSSDD//NNeettBBSSDD-- ccuurrrreenntt//ttaarr__ffiilleess//ppkkggssrrcc..ttaarr..ggzz and extracting it into _/_u_s_r_/_p_k_g_s_r_c. See _/_u_s_r_/_p_k_g_s_r_c_/_R_E_A_D_M_E then for more information. 6. Misc ++oo To adjust the system to your local timezone, point the _/_e_t_c_/_l_o_c_a_l_t_i_m_e symlink to the appropriate file under _/_u_s_r_/_s_h_a_r_e_/_z_o_n_e_i_n_f_o. ++oo Edit _/_e_t_c_/_a_l_i_a_s_e_s to forward root mail to the right place (run newaliases(1) afterwards.) ++oo The _/_e_t_c_/_s_e_n_d_m_a_i_l_._c_f file will almost definitely need to be ad- justed; files aiding in this can be found in _/_u_s_r_/_s_h_a_r_e_/_s_e_n_d_m_a_i_l. See the README file there for more infor- mation. ++oo Edit _/_e_t_c_/_r_c_._l_o_c_a_l to run any local daemons you use. ++oo Many of the _/_e_t_c files are documented in section 5 of the manu- al; so just invoking mmaann _f_i_l_e_n_a_m_e is likely to give you more information on these files. UUppggrraaddiinngg aa pprreevviioouussllyy--iinnssttaalllleedd NNeettBBSSDD SSyysstteemm The upgrade to NetBSD 1.4 is a binary upgrade; it can be quite difficult to advance to a later version by recompiling from source due primarily to interdependencies in the various components. To do the upgrade, you must have the bootable install floppy _b_o_o_t_._f_s, or, _l_o_a_d_b_s_d_._x utility and _n_e_t_b_s_d_._I_N_S_T_A_L_L file which can be found in _i_n_s_t_a_l_l_a_t_i_o_n_/_m_i_s_c in your Human68k disk. You must also have at least the bbaassee and kkeerrnn binary distribution sets available, so that you can upgrade with it, using one of the upgrade methods described below. Finally, you must have sufficient disk space available to install the new binaries. Since the old binaries are being overwritten in place, you only need space for the new binaries, which weren't previously on the system. If you have a few megabytes free on each of your root and _/_u_s_r partitions, you should have enough space. Since upgrading involves replacing the boot blocks on your NetBSD parti- tion, the kernel, and most of the system binaries, it has the potential to cause data loss. You are strongly advised to _b_a_c_k _u_p _a_n_y _i_m_p_o_r_t_a_n_t _d_a_t_a _o_n _y_o_u_r _d_i_s_k, whether on the NetBSD partition or on another operat- ing system's partition, before beginning the upgrade process. To upgrade your system, follow the following instructions: 1. Boot your machine using of the boot.fs floppy, or boot with _l_o_a_d_b_s_d_._x utility. 2. You will be presented with a welcome message and a prompt asking whether you are going to "install" NetBSD or "upgrade" an exisiting system. Select "upgrade" to start. 3. You will be presented with some information about the upgrade pro- cess and a warning message, and will be asked if you wish to proceed with the upgrade process. If you answer negatively, the upgrade process will stop, and your disk will not be modified. If you an- swer affirmatively, the upgrade process will begin, and your disk will be modified. You may hit Control-C to stop the upgrade process at any time. However, if you hit it at an inopportune moment, your system may be left in an inconsistent (and possibly unusable) state. 4. You will be asked if you wish to upgrade your file systems to the new file system format. If you do, reply affirmatively. If you don't have your file systems upgraded now, you should probably do it manually after the install process is complete, by using "fsck -c 2". Read the fsck(8) manual page for more details. Note that this step is only important when upgrading from a pre-NetBSD 1.0 release. 5. The upgrade program will then check your root file system, and, if you approved, will upgrade it to the new file system format. It will then mount your root file system on /mnt. 6. If your file systems are being upgraded, the upgrade script will copy the new fsck(8) program to your hard disk and upgrade your re- maining file systems. 7. The upgrade program will then automatically replace the boot blocks on your disk with newer versions, and mount all of your file systems under /mnt. (In other words, your root partition will be mounted on /mnt, your /usr partition on /mnt/usr, etc.) 8. If you don't already have the NetBSD distribution sets on your disk, look in the installation section for information on how to transfer them to your disk. 9. If you don't have the disk space to copy all of the distribution on- to the hard drive, you can install a kernel on the hard drive as de- tailed a few paragraphs below, then boot off the hard drive. Now you can copy and install distribution sets incrementally from your lone floppy drive. Once the distribution sets are transferred to your disk, continue here. (Obviously, if the NetBSD distribution sets are already on your disk, because you've transferred them before starting the up- grade process, you don't need to transfer them again now!) 10. After the software has been transferred to the machine (or mounted, in the case of upgrading via NFS or CD-ROM), change into the direc- tory containing the "base.tgz" distribution set. Once you are there, run the "Set_tmp_dir" command, and hit return at the prompt to select the default answer for the temporary directory's path name. (It should be the path name of the directory that you're in.) 11. Run the command "Extract kern" to upgrade the kernel. 12. Run the command "Extract base" to upgrade the base distribution. 13. Repeat the above two steps for all of the sets you wish to upgrade. (For each, change into the directory containing the set, run "Set_tmp_dir" and accept the default path name, then run the "Ex- tract " command.) 14. If you were previously using the security distribution set, you _m_u_s_t upgrade to the new version, or you will not be able to log in when the upgrade process is complete. Similarly, if you were not previ- ously using the security set, you must _n_o_t upgrade to the new ver- sion. 15. When you are done upgrading all of the distribution sets you wish to upgrade, issue the command "Cleanup". It will clean up the instal- lation, by remaking some system databases. When it is complete, all you have to do is to reboot(8) your system. _Y_o_u_r _s_y_s_t_e_m _h_a_s _n_o_w _b_e_e_n _u_p_g_r_a_d_e_d _t_o NetBSD 1.4. After a new kernel has been copied to your hard disk, your machine is a complete NetBSD 1.4 system. However, that doesn't mean that you're fin- ished with the upgrade process. There are several things that you should do, or might have to do, to insure that the system works properly. First, if you did not upgrade your file systems to the new file system format during the upgrade process, and you are upgrading from a pre-1.0 NetBSD, you may want to do so now, with "fsck -c 2". If you are unsure about the process, it's suggested that you read the fsck(8) manual page. Second, you will probably want to get the etc distribution, extract it, and compare its contents with those in your /etc/ directory. You will probably want to replace some of your system configuration files, or in- corporate some of the changes in the new versions into yours. Third, you will probably want to update the set of device nodes you have in /dev. If you've changed the contents of /dev by hand, you will need to be careful about this, but if not, you can just cd into /dev, and run the command "sh MAKEDEV all". Fourth, you must deal with certain changes in the formats of some of the configuration files. The most notable change is that the "options" given to many of the file systems in /etc/fstab or by hand have changed, and some of the file systems have changed names. *IMPORTANT*: ANY INSTANCES OF "ufs" IN /etc/fstab MUST BE CHANGED TO "ffs". _I_m_p_o_r_t_a_n_t_: _a_n_y _i_n_s_t_a_n_c_e_s _o_f uuffss _i_n _/_e_t_c_/_f_s_t_a_b _m_u_s_t _b_e _c_h_a_n_g_e_d _t_o ffffss. To find out what the new options are, it's suggested that you read the manual page for the file systems' mount commands, for example mount_nfs(8) for NFS. _N_o_t_e The information for mounts of type _f_f_s, i.e. Fast File System, is contained in the mount(8) man page. Finally, you will want to delete old binaries that were part of the ver- sion of NetBSD that you upgraded from and have since been removed from the NetBSD distribution. If you are upgrading from a pre-1.0 NetBSD, you might also want to recompile any locally-built binaries, to take advan- tage of the shared libraries. (Note that any new binaries that you build will be dynamically linked, and therefore take advantage of the shared libraries, by default. For information on how to make statically linked binaries, see the cc(1) and ld(1) manual pages.) CCoommppaattiibbiilliittyy IIssssuueess WWiitthh PPrreevviioouuss NNeettBBSSDD RReelleeaasseess Users upgrading from previous versions of NetBSD may wish to bear the following problems and compatibility issues in mind when upgrading to NetBSD 1.4 _N_o_t_e Only issues effecting an upgrade from NetBSD 1.3 or NetBSD 1.3.x are decribed here. ++oo "machine" directory/link in "/usr/include" Description Some architecture may fail to install the ccoommpp set because the /usr/include/machine directory changed to a symbolic link in NetBSD 1.4. Fix If this happens, you can use the command # rrmm --rr //uussrr//iinncclluuddee//mmaacchhiinnee to remove the old directory and it contents and reinstall the ccoommpp set. UUssiinngg oonnlliinnee NNeettBBSSDD ddooccuummeennttaattiioonn Documentation is available if you first install the manual distribution set. Traditionally, the ``man pages'' (documentation) are denoted by ``name(section)''. Some examples of this are ++oo intro(1), ++oo man(1), ++oo apropros(1), ++oo passwd(1), and ++oo passwd(5). The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8. The _m_a_n command is used to view the documentation on a topic, and is started by entering mmaann [_s_e_c_t_i_o_n] _t_o_p_i_c. The brackets [] around the sec- tion should not be entered, but rather indicate that the section is op- tional. If you don't ask for a particular section, the topic with the lowest numbered section name will be displayed. For instance, after log- ging in, enter mmaann ppaasssswwdd to read the documentation for passwd(1). To view the documentation for passwd(5)m enter mmaann 55 ppaasssswwdd instead. If you are unsure of what man page you are looking for, enter aapprrooppooss _s_u_b_j_e_c_t_-_w_o_r_d where _s_u_b_j_e_c_t_-_w_o_r_d is your topic of interest; a list of possibly related man pages will be displayed. AAddmmiinniissttrriivviiaa If you've got something to say, do so! We'd like your input. There are various mailing lists available via the mailing list server at _m_a_j_o_r_d_o_m_o_@_N_e_t_B_S_D_._O_R_G. To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instruc- tions. There are various mailing lists set up to deal with comments and ques- tions about this release. Please send comments to: _n_e_t_b_s_d_- _c_o_m_m_e_n_t_s_@_N_e_t_B_S_D_._O_R_G. To report bugs, use the send-pr(1) command shipped with NetBSD, and fill in as much information about the problem as you can. Good bug reports in- clude lots of details. Additionally, bug reports can be sent by mail to: _n_e_t_b_s_d_-_b_u_g_s_@_N_e_t_B_S_D_._O_R_G. Use of send-pr(1) is encouraged, however, because bugs reported with it are entered into the NetBSD bugs database, and thus can't slip through the cracks. There are also port-specific mailing lists, to discuss aspects of each port of NetBSD. Use majordomo to find their addresses. If you're inter- ested in doing a serious amount of work on a specific port, you probably should contact the "owner" of that port (listed below). If you'd like to help with this effort, and have an idea as to how you could be useful, send us mail or subscribe to: _n_e_t_b_s_d_-_h_e_l_p_@_N_e_t_B_S_D_._O_R_G. As a favor, please avoid mailing huge documents or files to these mailing lists. Instead, put the material you would have sent up for FTP some- where, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it. TThhaannkkss ggoo ttoo ++oo The former members of UCB's Computer Systems Research Group, includ- ing (but not limited to): Keith Bostic Ralph Campbell Mike Karels Marshall Kirk McKusick for their ongoing work on BSD systems, support, and encouragement. ++oo Also, our thanks go to: Mike Hibler Rick Macklem Jan-Simon Pendry Chris Torek for answering lots of questions, fixing bugs, and doing the various work they've done. ++oo UC Berkeley's Experimental Computing Facility provided a home for sun-lamp in the past, people to look after it, and a sense of humor. Rob Robertson, too, has added his unique sense of humor to things, and for a long time provided the primary FTP site for NetBSD. ++oo Vixie Enterprises for hosting the NetBSD FTP and SUP server. ++oo Redback Networks, Inc. for hosting the NetBSD Mail server. ++oo Without CVS, this project would be impossible to manage, so our hats go off to Brian Berliner, Jeff Polk, and the various other people who've had a hand in making CVS a useful tool. ++oo Dave Burgess _b_u_r_g_e_s_s_@_c_y_n_j_u_t_._i_n_f_o_n_e_t_._n_e_t has been maintaining the 386BSD/NetBSD/FreeBSD FAQ for quite some time, and deserves to be recognized for it. ++oo The following individuals and organiztions (each in alphabetical or- der) have made donations or loans of hardware and/or money, to sup- port NetBSD development, and deserve credit for it: Jason Birnschein Jason Brazile David Brownlee Simon Burge Dave Burgess Ralph Campbell Brian Carlstrom James Chacon Bill Coldwell Charles Conn Tom Coulter Charles D. Cranor Christopher G. Demetriou Scott Ellis Hubert Feyrer Greg Gingerich Guenther Grau Ross Harvey Charles M. Hannum Michael L. Hitch Jordan K. Hubbard Scott Kaplan Noah M. Keiserman Chris Legrow Neil J. McRae Perry E. Metzger Herb Peyerl Mike Price Thor Lancelot Simon Bill Sommerfeld Paul Southworth Ted Spradley Kimmo Suominen Jason R. Thorpe Steve Wadlow Advanced System Products, Inc. Avalon Computer Systems Bay Area Internet Solutions Canada Connect Corporation Demon Internet, UK Digital Equipment Corporation Easynet, UK Free Hardware Foundation Innovation Development Enterprises of America Internet Software Consortium MS Macro System GmbH, Germany Numerical Aerospace Simulation Facility, NASA Ames Research Center Piermont Information Systems Inc. VMC Harald Frank, Germany (If you're not on that list and should be, tell us! We probably were not able to get in touch with you, to verify that you wanted to be listed.) ++oo Finally, we thank all of the people who've put sweat and tears into developing NetBSD since its inception in January, 1993. (Obviously, there are a lot more people who deserve thanks here. If you're one of them, and would like to mentioned, tell us!) WWee aarree...... (in alphabetical order) _T_h_e _N_e_t_B_S_D _c_o_r_e _g_r_o_u_p_: Paul Kranenburg _p_k_@_N_e_t_B_S_D_._O_R_G Scott Reynolds _s_c_o_t_t_r_@_N_e_t_B_S_D_._O_R_G Christos Zoulas _c_h_r_i_s_t_o_s_@_N_e_t_B_S_D_._O_R_G _T_h_e _p_o_r_t_m_a_s_t_e_r_s _(_a_n_d _t_h_e_i_r _p_o_r_t_s_)_: Mark Brinicombe _m_a_r_k_@_N_e_t_B_S_D_._O_R_G aarrmm3322 Jeremy Cooper _j_e_r_e_m_y_@_N_e_t_B_S_D_._O_R_G ssuunn33xx Ross Harvey _r_o_s_s_@_N_e_t_B_S_D_._O_R_G aallpphhaa Ignatios Souvatzis _i_s_@_N_e_t_B_S_D_._O_R_G aammiiggaa Eduardo Horvath _e_e_h_@_N_e_t_B_S_D_._O_R_G ssppaarrcc6644 Paul Kranenburg _p_k_@_N_e_t_B_S_D_._O_R_G ssppaarrcc Anders Magnusson _r_a_g_g_e_@_N_e_t_B_S_D_._O_R_G vvaaxx Tsubai Masanari _t_s_u_b_a_i_@_N_e_t_B_S_D_._O_R_G mmaaccppppcc Tsubai Masanari _t_s_u_b_a_i_@_N_e_t_B_S_D_._O_R_G nneewwssmmiippss Minoura Makoto _m_i_n_o_u_r_a_@_N_e_t_B_S_D_._O_R_G xx6688kk Phil Nelson _p_h_i_l_@_N_e_t_B_S_D_._O_R_G ppcc553322 Scott Reynolds _s_c_o_t_t_r_@_N_e_t_B_S_D_._O_R_G mmaacc6688kk Darrin Jewell _d_b_j_@_N_e_t_B_S_D_._O_R_G nneexxtt6688kk Gordon Ross _g_w_r_@_N_e_t_B_S_D_._O_R_G ssuunn33,, ssuunn33xx Kazuki Sakamoto _s_a_k_a_m_o_t_o_@_N_e_t_B_S_D_._O_R_G bbeebbooxx Wolfgang Solfrank _w_s_@_N_e_t_B_S_D_._O_R_G ppoowweerrppcc Jonathan Stone _j_o_n_a_t_h_a_n_@_N_e_t_B_S_D_._O_R_G ppmmaaxx Jason Thorpe _t_h_o_r_p_e_j_@_N_e_t_B_S_D_._O_R_G hhpp330000 Frank van der Linden _f_v_d_l_@_N_e_t_B_S_D_._O_R_G ii338866 Leo Weppelman _l_e_o_@_N_e_t_B_S_D_._O_R_G aattaarrii Steve Woodford _s_c_w_@_N_e_t_B_S_D_._O_R_G mmvvmmee6688kk _T_h_e _N_e_t_B_S_D _1_._4 _R_e_l_e_a_s_e _E_n_g_i_n_e_e_r_i_n_g _t_e_a_m_: Ted Lemon _m_e_l_l_o_n_@_N_e_t_B_S_D_._O_R_G Perry Metzger _p_e_r_r_y_@_N_e_t_B_S_D_._O_R_G Curt Sampson _c_j_s_@_N_e_t_B_S_D_._O_R_G _D_e_v_e_l_o_p_e_r_s _a_n_d _o_t_h_e_r _c_o_n_t_r_i_b_u_t_o_r_s_: Steve Allen _w_o_r_m_e_y_@_N_e_t_B_S_D_._O_R_G Lennart Augustsson _a_u_g_u_s_t_s_s_@_N_e_t_B_S_D_._O_R_G Christoph Badura _b_a_d_@_N_e_t_B_S_D_._O_R_G Manuel Bouyer _b_o_u_y_e_r_@_N_e_t_B_S_D_._O_R_G Robert V. Baron _r_v_b_@_N_e_t_B_S_D_._O_R_G John Brezak _b_r_e_z_a_k_@_N_e_t_B_S_D_._O_R_G Allen Briggs _b_r_i_g_g_s_@_N_e_t_B_S_D_._O_R_G Aaron Brown _a_b_r_o_w_n_@_N_e_t_B_S_D_._O_R_G David Brownlee _a_b_s_@_N_e_t_B_S_D_._O_R_G Simon Burge _s_i_m_o_n_b_@_N_e_t_B_S_D_._O_R_G Dave Burgess _b_u_r_g_e_s_s_@_c_y_n_j_u_t_._i_n_f_o_n_e_t_._n_e_t Dave Carrel _c_a_r_r_e_l_@_N_e_t_B_S_D_._O_R_G Bill Coldwell _b_i_l_l_c_@_N_e_t_B_S_D_._O_R_G Chuck Cranor _c_h_u_c_k_@_N_e_t_B_S_D_._O_R_G Alistair Crooks _a_g_c_@_N_e_t_B_S_D_._O_R_G Aidan Cully _a_i_d_a_n_@_N_e_t_B_S_D_._O_R_G Rob Deker _d_e_k_e_r_@_N_e_t_B_S_D_._O_R_G Chris G. Demetriou _c_g_d_@_N_e_t_B_S_D_._O_R_G Matthias Drochner _d_r_o_c_h_n_e_r_@_N_e_t_B_S_D_._O_R_G Enami Tsugutomo _e_n_a_m_i_@_N_e_t_B_S_D_._O_R_G Bernd Ernesti _v_e_e_g_o_@_N_e_t_B_S_D_._O_R_G Erik Fair _f_a_i_r_@_N_e_t_B_S_D_._O_R_G Hubert Feyrer _h_u_b_e_r_t_f_@_N_e_t_B_S_D_._O_R_G Thorsten Frueauf _f_r_u_e_a_u_f_@_N_e_t_B_S_D_._O_R_G Brian R. Gaeke _b_r_g_@_d_g_a_t_e_._o_r_g Thomas Gerner _t_h_o_m_a_s_@_N_e_t_B_S_D_._O_R_G Justin Gibbs _g_i_b_b_s_@_N_e_t_B_S_D_._O_R_G Adam Glass _g_l_a_s_s_@_N_e_t_B_S_D_._O_R_G Michael Graff _e_x_p_l_o_r_e_r_@_N_e_t_B_S_D_._O_R_G Brad Grantham _g_r_a_n_t_h_a_m_@_t_e_n_o_n_._c_o_m Matthew Green _m_r_g_@_N_e_t_B_S_D_._O_R_G Juergen Hannken-Illjes _h_a_n_n_k_e_n_@_N_e_t_B_S_D_._O_R_G Charles M. Hannum _m_y_c_r_o_f_t_@_N_e_t_B_S_D_._O_R_G Eric Haszlakiewicz _e_r_h_@_N_e_t_B_S_D_._O_R_G Michael L. Hitch _o_s_y_m_h_@_N_e_t_B_S_D_._O_R_G Ken Hornstein _k_e_n_h_@_N_e_t_B_S_D_._O_R_G Marc Horowitz _m_a_r_c_@_N_e_t_B_S_D_._O_R_G ITOH Yasufumi _i_t_o_h_y_@_N_e_t_B_S_D_._O_R_G Matthew Jacob _m_j_a_c_o_b_@_N_e_t_B_S_D_._O_R_G Lonhyn T. Jasinskyj _l_o_n_h_y_n_@_N_e_t_B_S_D_._O_R_G Darrin Jewell _d_b_j_@_N_e_t_B_S_D_._O_R_G Lawrence Kesteloot _k_e_s_t_e_l_o_o_@_c_s_._u_n_c_._e_d_u Klaus Klein _k_l_e_i_n_k_@_N_e_t_B_S_D_._O_R_G John Kohl _j_t_k_@_N_e_t_B_S_D_._O_R_G Kevin Lahey _k_m_l_@_N_e_t_B_S_D_._O_R_G Ted Lemon _m_e_l_l_o_n_@_N_e_t_B_S_D_._O_R_G Mike Long _m_i_k_e_l_@_N_e_t_B_S_D_._O_R_G Paul Mackerras _p_a_u_l_u_s_@_N_e_t_B_S_D_._O_R_G Neil J. McRae _n_e_i_l_@_N_e_t_B_S_D_._O_R_G Perry Metzger _p_e_r_r_y_@_N_e_t_B_S_D_._O_R_G Luke Mewburn _l_u_k_e_m_@_N_e_t_B_S_D_._O_R_G der Mouse _m_o_u_s_e_@_N_e_t_B_S_D_._O_R_G Tohru Nishimura _n_i_s_i_m_u_r_a_@_N_e_t_B_S_D_._O_R_G Masaru Oki _o_k_i_@_N_e_t_B_S_D_._O_R_G Greg Oster _o_s_t_e_r_@_N_e_t_B_S_D_._O_R_G Herb Peyerl _h_p_e_y_e_r_l_@_N_e_t_B_S_D_._O_R_G Matthias Pfaller _m_a_t_t_h_i_a_s_@_N_e_t_B_S_D_._O_R_G Dante Profeta _d_a_n_t_e_@_N_e_t_B_S_D_._O_R_G Chris Provenzano _p_r_o_v_e_n_@_N_e_t_B_S_D_._O_R_G Darren Reed _d_a_r_r_e_n_r_@_N_e_t_B_S_D_._O_R_G Tim Rightnour _g_a_r_b_l_e_d_@_N_e_t_B_S_D_._O_R_G Heiko W. Rupp _h_w_r_@_N_e_t_B_S_D_._O_R_G SAITOH Masanobu _m_s_a_i_t_o_h_@_N_e_t_B_S_D_._O_R_G Kazuki Sakamoto _s_a_k_a_m_o_t_o_@_N_e_t_B_S_D_._O_R_G Curt Sampson _c_j_s_@_N_e_t_B_S_D_._O_R_G Wilfredo Sanchez _w_s_a_n_c_h_e_z_@_N_e_t_B_S_D_._O_R_G Ty Sarna _t_s_a_r_n_a_@_N_e_t_B_S_D_._O_R_G Matthias Scheler _t_r_o_n_@_N_e_t_B_S_D_._O_R_G Karl Schilke (rAT) _r_a_t_@_N_e_t_B_S_D_._O_R_G Tim Shepard _s_h_e_p_@_N_e_t_B_S_D_._O_R_G Chuck Silvers _c_h_s_@_N_e_t_B_S_D_._O_R_G Thor Lancelot Simon _t_l_s_@_N_e_t_B_S_D_._O_R_G Noriyuki Soda _s_o_d_a_@_N_e_t_B_S_D_._O_R_G Wolfgang Solfrank _w_s_@_N_e_t_B_S_D_._O_R_G Bill Sommerfeld _s_o_m_m_e_r_f_e_l_d_@_N_e_t_B_S_D_._O_R_G Ignatios Souvatzis _i_s_@_N_e_t_B_S_D_._O_R_G Bill Studenmund _w_r_s_t_u_d_e_n_@_N_e_t_B_S_D_._O_R_G Kevin Sullivan _s_u_l_l_i_v_a_n_@_N_e_t_B_S_D_._O_R_G Kimmo Suominen _k_i_m_@_N_e_t_B_S_D_._O_R_G Matt Thomas _m_a_t_t_@_N_e_t_B_S_D_._O_R_G Jason Thorpe _t_h_o_r_p_e_j_@_N_e_t_B_S_D_._O_R_G Christoph Toshok _t_o_s_h_o_k_@_N_e_t_B_S_D_._O_R_G Todd Vierling _t_v_@_N_e_t_B_S_D_._O_R_G Paul Vixie _v_i_x_i_e_@_N_e_t_B_S_D_._O_R_G Krister Walfridsson _k_r_i_s_t_e_r_w_@_N_e_t_B_S_D_._O_R_G Nathan Williams _n_a_t_h_a_n_w_@_N_e_t_B_S_D_._O_R_G Colin Wood _e_n_d_e_r_@_N_e_t_B_S_D_._O_R_G LLeeggaall MMuummbboo--JJuummbboo The following notices are required to satisfy the license terms of the software that we have mentioned in this document: This product includes software developed by the University of California, Berkeley and its contributors. This product includes software developed by the Computer Systems Engi- neering Group at Lawrence Berkeley Laboratory. This product includes software developed by the NetBSD Foundation, Inc. and its contributors. This product includes software developed by Adam Glass and Charles Han- num. This product includes software developed by Adam Glass. This product includes software developed by Berkeley Software Design, Inc. This product includes software developed by Charles D. Cranor and Wash- ington University. This product includes software developed by Charles D. Cranor. This product includes software developed by Charles Hannum, by the Uni- versity of Vermont and State Agricultural College and Garrett A. Wollman, by William F. Jolitz, and by the University of California, Berkeley, Lawrence Berkeley Laboratory, and its contributors. This product includes software developed by Charles Hannum. This product includes software developed by Charles M. Hannum. This product includes software developed by Chris Provenzano. This product includes software developed by Christian E. Hopps. This product includes software developed by Christopher G. Demetriou for the NetBSD Project. This product includes software developed by Christopher G. Demetriou. This product includes software developed by Christos Zoulas. This product includes software developed by David Jones and Gordon Ross. This product includes software developed by Dean Huxley. This product includes software developed by Eric S. Hvozda. This product includes software developed by Ezra Story. This product includes software developed by Gordon Ross. This product includes software developed by Gordon W. Ross and Leo Wep- pelman. This product includes software developed by Gordon W. Ross. This product includes software developed by Herb Peyerl. This product includes software developed by Ian W. Dall. This product includes software developed by Ignatios Souvatzis for the NetBSD Project. This product includes software developed by Jason R. Thorpe for And Com- munications, http://www.and.com/. This product includes software developed by Joachim Koenig-Baltes. This product includes software developed by Jochen Pohl for The NetBSD Project. This product includes software developed by John Polstra. This product includes software developed by Jonathan Stone and Jason R. Thorpe for the NetBSD Project. This product includes software developed by Jonathan Stone for the NetBSD Project. This product includes software developed by Jonathan Stone. This product includes software developed by Julian Highfield. This product includes software developed by Kenneth Stailey. This product includes software developed by Leo Weppelman. This product includes software developed by Lloyd Parkes. This product includes software developed by Mark Brinicombe. This product includes software developed by Markus Wild. This product includes software developed by Martin Husemann and Wolfgang Solfrank. This product includes software developed by Mats O Jansson and Charles D. Cranor. This product includes software developed by Mats O Jansson. This product includes software developed by Matthias Pfaller. This product includes software developed by Paul Kranenburg. This product includes software developed by Paul Mackerras. This product includes software developed by Peter Galbavy. This product includes software developed by Philip A. Nelson. This product includes software developed by Rodney W. Grimes. This product includes software developed by Scott Bartram. This product includes software developed by SigmaSoft, Th. Lockert. This product includes software developed by Terrence R. Lambert. This product includes software developed by Theo de Raadt and John Brezak. This product includes software developed by Theo de Raadt. This product includes software developed by TooLs GmbH. This product includes software developed by Winning Strategies, Inc. This product includes software developed by the Center for Software Sci- ence at the University of Utah. This product includes software developed by the University of Calgary De- partment of Computer Science and its contributors. This product includes software developed by the University of Vermont and State Agricultural College and Garrett A. Wollman. This product includes software developed for the FreeBSD project. This product includes software developed for the Internet Software Con- sortium by Ted Lemon. This product includes software developed for the NetBSD Project by Frank van der Linden. This product includes software developed for the NetBSD Project by Jason R. Thorpe. This product includes software developed for the NetBSD Project by John M. Vinopal. This product includes software developed for the NetBSD Project by Matthias Drochner. This product includes software developed for the NetBSD Project by Matthieu Herrb. This product includes software developed for the NetBSD Project by Perry E. Metzger. This product includes software developed for the NetBSD Project by Pier- mont Information Systems Inc. This product includes software developed for the NetBSD Project by Ted Lemon. This product includes software developed by LAN Media Corporation and its contributors. This product includes software developed by Michael Graff for the NetBSD Project. This product includes software developed by Masaru Oki. This product includes software developed by Masanobu Saitoh. This product includes software developed by Takumi Nakamura. This product includes software developed by Kazuhisa Shimizu. This product includes software developed by Takuya HARAKAWA. This product includes software developed by MINOURA Makoto. This product includes software developed by Yasushi YAMASAKI. This product includes software developed by ITOH Yasufumi. NetBSD 23 March 1999 31