July 2, 2001 INSTALL 8 NetBSD

NAME

INSTALL - Installation procedure for NetBSD/atari.

DESCRIPTION

About this Document

This document describes the installation procedure for NetBSD1.5.1 on the atari platform. It is available in four different formats titled INSTALL.ext, where .ext is one of .ps, .html, .more, or .txt:

.ps
PostScript.

.html
Standard Internet HTML.

.more
The enhanced text format used on UNIX-like systems by the more(1) and less(1) pager utility programs. This is the format in which the on-line man pages are generally presented.

.txt
Plain old ASCII.

You are reading the HTML version.

What is NetBSD?

The NetBSD Operating System is a fully functional Open Source UNIX-like operating system derived from the University of California, Berkeley Networking Release 2 (Net/2), 4.4BSD-Lite, and 4.4BSD-Lite2 sources. NetBSD runs on thirty-one different system architectures featuring twelve distinct families of CPUs, and is being ported to more. The NetBSD1.5.1 release contains complete binary releases for fifteen different machine types. (The sixteen remaining are not fully supported at this time and are thus not part of the binary distribution. For information on them, please see the NetBSD web site at http://www.netbsd.org/.)

NetBSD is a completely integrated system. In addition to its highly portable, high performance kernel, NetBSD features a complete set of user utilities, compilers for several languages, the X Window System, firewall software and numerous other tools, all accompanied by full source code.

NetBSD is a creation of the members of the Internet community. Without the unique cooperation and coordination the net makes possible, it's likely that NetBSD wouldn't exist.

Upgrade path to NetBSD 1.5.1

If you are not installing your system ``from scratch'' but instead are going to upgrade an existing system already running NetBSD you need to know which versions you can upgrade with NetBSD 1.5.1.

NetBSD 1.5.1 is an upgrade of NetBSD 1.5 and earlier major and patch releases of NetBSD.

The intermediate development versions of code available on the main trunk in our CVS repository (also known as ``NetBSD-current'') from after the point where the release cycle for 1.5 was started are designated by version identifiers such as 1.5A, 1.5B, etc. These identifiers do not designate releases, but indicate major changes in internal kernel APIs. Note that the kernel from NetBSD 1.5.1 can not be used to upgrade a system running one of those intermediate development versions. Trying to use the NetBSD 1.5.1 kernel on such a system will probably result in problems.

Please also note that it is not possible to do a direct ``version'' comparison between any of the intermediate development versions mentioned above and 1.5.1 to determine if a given feature is present or absent in 1.5.1. The development of 1.5 and the subsequent ``point'' releases is done on a separate branch in the CVS repository. The branch was created when the release cycle for 1.5 was started, and during the release cycle of 1.5 and its patch releases, selected fixes and enhancements have been imported from the main development trunk. So, there are features in 1.5.1 which were not in, e.g. 1.5B, and vice versa.

Major Changes Between 1.5 and 1.5.1

The complete list of changes between NetBSD 1.5 and 1.5.1 can be found in the file CHANGES-1.5.1 in the top directory of the source tree. The following are highlights only:

  • A driver for the Aironet/Cisco wireless PCMCIA cards has been added; see an(4).

  • NFS client performance has been improved, typically by 40% for writes but possibly up to 100% in certain setups.

  • The siop(4) driver has improved in performance and robustness.

  • Support for cloning pseudo-interfaces has been added. See ifconfig(8).

  • Support for 802.1Q virtual LANs has been added. See vlan(4).

  • The isp(4) driver has been upgraded to (among other things) work on MacPPC.

  • BIND has been upgraded to version 8.2.3 (SA2001-001).

  • Support for booting from RAIDframe RAID1 mirrors on i386 added.

  • The lfs(4) file system has again been substantially updated, but is still experimental.

  • Ultra/66 support has been added for capable VIA chipsets, and Ultra/100 support has been added for the HPT370, Promise and Intel ICH2 controllers in the pciide(4) driver. Support for Intel 82801BAM controllers has also been added, and handling of Ali controllers has been improved.

  • OpenSSH has been updated to deal with a security issue (SA2001-003).

  • Sendmail has been upgraded to version 8.11.3.

  • The ex(4) driver has added support for 3Com 3c555, 3c556 and 3c556B MiniPCI Ethernet cards.

  • A driver for the on-board audio hardware found on many Apple PowerMacs has been added; see awacs(4).

  • The sip(4) driver has been fixed to properly support the dp83815, as found in current Netgear FA311 10/100 cards.

  • ftpd(8) has been updated to deal with two security issues (SA2000-018 and SA2001-005).

  • ntpd(8) has been updated to deal with a security issue (SA2001-004).

  • telnetd(8) has been updated to deal with a security issue (SA2000-017).

  • A vulnerability on i386 related to USER_LDT has been fixed (SA2001-002).

  • The Linux emulation has been enhanced to prepare for the support of using the Linux version of VMware.

  • IP checksumming speed has been improved on i386 compared to NetBSD1.5 by about 10%.

  • Support for the Socket Communications LP-E Type II PCMCIA NE2000 clone card has been added to ne(4).

  • The DHCP software has been upgraded to ISC version 3, Beta 2, patchlevel 23, to fix core dumps in dhclient(8), among other things. Please note that the new dhcpd(8) forces you to configure a "ddns-update-style" of either "ad-hoc", "interim" or "none".

  • Various fixes and enhancements to INET6 and IPSEC code; among them improved interaction between IPF/Nat and IPSEC.

  • The Heimdal kerberos(8) implementation has been upgraded to version 0.3e.

  • Support for Accton EN2242 and other AmdTek AN985 cards added to the tlp(4) driver.

  • Several country-specific keyboard mappings have been added for USB keyboards.

  • A driver for Yamaha YMF724/740/744/745-based sound cards has been added, see yds(4).

  • The maximum number of BSD disklabel partitions on the i386 port has been increased from 8 to 16.

  • Drivers for the AC'97 based audio sound chips ESS Technology Maestro 1, 2, and 2E (see esm(4)), NeoMagic 256 (see neo(4)), and Cirrus Logic CrystalClear PCI Audio CS4281 (see clct(4))have been added.

In addition, many bugs have been fixed--more than 95 problems reported through our problem tracking system have been fixed, and some other non-reported problems have also been found and fixed. See the CHANGES-1.5.1 file for the complete list.

The NetBSD Packages Collection (pkgsrc) which is used to maintain, build, track dependencies, and maintain NetBSD-specific fixes to third-party programs, has received a major overhaul for NetBSD 1.5.1. Some highlights are:

  • Many new packages were added to the collection, which now includes about 2100 packages. Many of them are also available as pre-compiled binaries on ftp.netbsd.org and its mirrors. All packages have been verified on a release candidate of 1.5.1/i386, and have been found to compile, install and de-install cleanly. Many packages have been modified and enhanced to compile and function properly on big-endian (m68k, sparc), and LP64 architectures (alpha, sparc64).

  • KDE2 and KOffice together consitutes a fully integrated office environment with no license problems, available for i386, alpha and many other architectures.

  • Mozilla 0.9, KDE2's Konqueror, and Links 0.95 are just a few examples of the web browsers available.

  • A support package for running VMware on NetBSD/i386 was added, it's called suse_vmware. The official VMware code, a valid license, and Wasabi Systems' compatibility package are all needed to run VMware.

  • Internal changes of the pkgsrc system include strong checksums to prevent malicious distribution files, as well as restructuring of the package structure in pkgsrc for faster extraction of pkgsrc tar files and upgrades via SUP and CVS.

Please note that at the moment, sysinst will not assist you in installing pre-built third-party binary packages or the pkgsrc system itself, so you will have to manually install packages using pkg_install or fetch and extract the pkgsrc.tgz tar file to get started.

Lastly, it should be noted that the X11 binaries shipped in NetBSD 1.5.1 is still based on XFree86 version 3.3.6. Several newer graphics cards are inadequately supported by that code base, but on the other hand support for several older graphics cards is not available in newer XFree86 code. NetBSD is in the process of moving to XFree86 version 4, and is currently maintaining both the XFree86 3.3.6 and the XFree86 version 4 code in the xsrc source set, and you may at compile time pick which sources to build and install. To ease installation, testing and use of the XFree86 version 4 code, a binary snapshot based on XFree86 version 4.0.3 will be made available for at least the i386 architecture shortly after the release of NetBSD 1.5.1.

Changes Between The NetBSD 1.4 and 1.5 Releases

The NetBSD1.5 release provides numerous significant functional enhancements, including support for many new devices, integration of hundreds of bug fixes, new and updated kernel subsystems, and many userland enhancements. The result of these improvements is a stable operating system fit for production use that rivals most commercially available systems.

It is impossible to completely summarize over one year of development that went into the NetBSD1.5.1 release. Some highlights include:

Kernel

  • Ports to new platforms including: arc, cobalt, hpcmips, news68k, sgimips, and sparc64.

  • Improved performance and stability of the UVM virtual memory subsystem.

  • Implementation of generic kernel locking code, as well as a restructure and re-tuning of the scheduler, to be used by the future symmetric multi-processing (SMP) implementation.

  • Improved compatibility support for Linux, OSF1, and SVR4 programs.

  • New compatibility support for Win32 programs.

  • Support for dynamically loaded ELF kernel modules.

  • Kernel process tracing using ktruss(1).

  • Deletion of swap devices using swapctl(8).

  • Easier hot-pluggability of keyboards and mice using a new wscons device--wsmux.

  • Improved PCMCIA and CardBus support, including support for detaching of devices and cards, resulting in better support for notebooks and PDA devices.

  • Numerous hardware improvements, including areas such as: audio, UDMA/66 support for ATA drives, USB, and wireless networking.
Networking

  • Addition of IP version 6 (IPv6) and IPsec to the networking stack, from the KAME project. This includes addition of kernel code for IPv6/IPsec, IPv4/v6 dual-stack user applications and supporting libraries. Due to this, the shlib major version for pcap(3) is incremented and you may need to recompile userland tools. The KAME IPv6 part includes results from the unified-IPv6 effort.
File system

  • Significant Fast file system (FFS) performance enhancements via integration of Kirk McKusick's soft updates and trickle sync code.

  • Support for the Windows NT `NTFS' file system (read-only at this stage).

  • Support for revision 1 of the Linux `ext2fs' file system.

  • Enhanced stability and usability of LFS (the BSD log-structured file system).

  • Various RAIDframe enhancements including: auto-detection of RAID components and auto-configuration of RAID sets, and the ability to configure the root file system (/) on a RAID set.

  • Support for Microsoft Joliet extensions to the ISO9660 CD file system.

  • Improved file system vnode locking mechanisms, thus resolving a source of several panics in the past.

  • Support for NFS and RPC over IPv6.

  • The server part of NFS locking (implemented by rpc.lockd(8)) now works.
Security

  • Strong cryptographic libraries and applications integrated, including the AES cipher Rijndael, the OpenSSL library, more complete Kerberos IV and Kerberos V support, and an SSH server and client.

  • sysctl(3) interfaces to various elements of process and system information, allowing programs such as ps(1), dmesg(1) and the like to operate without recompilation after kernel upgrades, and remove the necessity to run setgid kmem (thus improving system security).

  • Disable various services by default, and set the default options for disabled daemons to a higher level of logging.

  • Several code audits were performed. One audit replaced string routines that were used without bounds checking, and another one identified and disabled places where format strings were used in unsafe ways, allowing arbitrary data to be entered by (possibly) malicious users to overwrite application code, and leading from Denial of Service attacks to compromised systems.

  • sshd(8) and ssh(1) now require rnd(4) kernel random number devices.
System administration and user tools

  • Conversion of the rc(8) system startup and shutdown scripts to an `rc.d' mechanism, with separate control scripts for each service, and appropriate dependency ordering provided by rcorder(8).

  • postfix(1) provided as alternative mail transport agent to sendmail(8).

  • User management tools useradd(8), usermod(8), userdel(8), groupadd(8), groupmod(8), and groupdel(8) added to the system.

  • Incorporation of a login class capability database (/etc/login.conf) from BSD/OS.

  • Improved support for usernames longer than eight characters in programs such as at(1) and w(1).

  • Many enhancements to ftpd(8) providing features found in larger and less secure FTP daemons, such as user classes, connection limits, improved support for virtual hosting, transfer statistics, transfer rate throttling, and support for various IETF ftpext working group extensions.

  • The ftp(1) client has been improved even further, including transfer rate throttling, improved URL support, command line uploads. See the man page for details.
Miscellaneous

  • Updates to the NetBSD source code style code (located in /usr/share/misc/style) to use ANSI C only (instead of K&R) and reflect current (best) practice, and begin migrating the NetBSD source code to follow it.

  • Implementation of many SUSv2 features to the curses(3) library, including support for color.

  • Updates of most third party packages that are shipped in the base system, including file(1), ipfilter(4), ppp(4), and sendmail(8) to the latest stable release.

  • Many new packages in the pkgsrc system, including standard desktops like KDE and GNOME as well as latest Tcl/Tk and perl and many of the components of the Java Enterprise platform. The package framework itself now has full wildcard dependency support.

Kernel interfaces have continued to be refined, and more subsystems and device drivers are shared among the different ports. You can look for this trend to continue.

The atari release was imported into NetBSD in in March 1995. The first official release was NetBSD1.1. About a year later, NetBSD1.2 was released for the Atari. This release fixed a large number of bugs and made the Atari-port a stable member of the NetBSD family. The saga continued with the NetBSD1.3 release. In this release, support was added for the Medusa Hades, Riebl ethernet and Falcon IDE support. NetBSD1.4 was released a couple of years later, and added support for various devices. And now, NetBSD1.5.1 is emerging!

New port-specific features include:

  • Support for ESS Technology Solo-1 PCI Soundcard on the Hades.

The Future of NetBSD

The NetBSD Foundation has been incorporated as a non-profit organization. Its purpose is to encourage, foster and promote the free exchange of computer software, namely the NetBSD Operating System. The foundation will allow for many things to be handled more smoothly than could be done with our previous informal organization. In particular, it provides the framework to deal with other parties that wish to become involved in the NetBSD Project.

The NetBSD Foundation will help improve the quality of NetBSD by:

  • providing better organization to keep track of development efforts, including co-ordination with groups working in related fields.

  • providing a framework to receive donations of goods and services and to own the resources necessary to run the NetBSD Project.

  • providing a better position from which to undertake promotional activities.

  • periodically organizing workshops for developers and other interested people to discuss ongoing work.

We intend to begin narrowing the time delay between releases. Our ambition is to provide a full release every six to eight months.

We hope to support even more hardware in the future, and we have a rather large number of other ideas about what can be done to improve NetBSD.

We intend to continue our current practice of making the NetBSD-current development source available on a daily basis.

We intend to integrate free, positive changes from whatever sources submit them, providing that they are well thought-out and increase the usability of the system.

Above all, we hope to create a stable and accessible system, and to be responsive to the needs and desires of NetBSD users, because it is for and because of them that NetBSD exists.

Sources of NetBSD

Refer to http://www.netbsd.org/Sites/net.html.

NetBSD 1.5.1 Release Contents

The root directory of the NetBSD1.5.1 release is organized as follows:

.../NetBSD-1.5.1/

CHANGES
Changes since earlier NetBSD releases.

LAST_MINUTE
Last minute changes.

MIRRORS
A list of sites that mirror the NetBSD1.5.1 distribution.

README.files
README describing the distribution's contents.

TODO
NetBSD's todo list (also somewhat incomplete and out of date).

patches/
Post-release source code patches.

source/
Source distribution sets; see below.

In addition to the files and directories listed above, there is one directory per architecture, for each of the architectures for which NetBSD1.5.1 has a binary distribution. There are also README.export-control files sprinkled liberally throughout the distribution tree, which point out that there are some portions of the distribution that may be subject to export regulations of the United States, e.g. code under src/crypto and src/sys/crypto. It is your responsibility to determine whether or not it is legal for you to export these portions and to act accordingly.

The source distribution sets can be found in subdirectories of the source subdirectory of the distribution tree. They contain the complete sources to the system. The source distribution sets are as follows:

gnusrc
This set contains the ``gnu'' sources, including the source for the compiler, assembler, groff, and the other GNU utilities in the binary distribution sets.
22.3 MB gzipped, 98.8 MB uncompressed

pkgsrc
This set contains the ``pkgsrc'' sources, which contain the infrastructure to build third-party packages.
7.4 MB gzipped, 73.0 MB uncompressed

sharesrc
This set contains the ``share'' sources, which include the sources for the man pages not associated with any particular program; the sources for the typesettable document set; the dictionaries; and more.
3.3 MB gzipped, 13.2 MB uncompressed

src
This set contains all of the base NetBSD1.5.1 sources which are not in gnusrc, sharesrc, or syssrc.
24.8 MB gzipped, 123.1 MB uncompressed

syssrc
This set contains the sources to the NetBSD1.5.1 kernel for all architectures; config(8); and dbsym(8).
18.0 MB gzipped, 90.9 MB uncompressed

xsrc
This set contains the sources to the X Window System.
78.1 MB gzipped, 393.6 MB uncompressed

All the above source sets are located in the source/sets subdirectory of the distribution tree.

The source sets are distributed as compressed tar files. They may be unpacked into /usr/src with the command:


       #( cd / ; tar -zxpf - ) < set_name.tgz

The sets/Split/ subdirectory contains split versions of the source sets for those users who need to load the source sets from floppy or otherwise need a split distribution. The split sets are named set_name.xx where set_name is the distribution set name, and xx is the sequence number of the file, starting with ``aa'' for the first file in the distribution set, then ``ab'' for the next, and so on. All of these files except the last one of each set should be exactly 240,640 bytes long. (The last file is just long enough to contain the remainder of the data for that distribution set.)

The split distributions may be reassembled and extracted with cat as follows:


       # cat set_name.?? | ( cd / ; tar -zxpf - )

In each of the source distribution set directories, there are files which contain the checksums of the files in the directory:

BSDSUM
Historic BSD checksums for the various files in that directory, in the format produced by the command: cksum -o 1 file.

CKSUM
POSIX checksums for the various files in that directory, in the format produced by the command: cksum file.

MD5
MD5 digests for the various files in that directory, in the format produced by the command: cksum -m file.

SYSVSUM
Historic AT&T System V UNIX checksums for the various files in that directory, in the format produced by the command: cksum -o -2 file.

The MD5 digest is the safest checksum, followed by the POSIX checksum. The other two checksums are provided only to ensure that the widest possible range of system can check the integrity of the release files.

Note:
Each directory in the atari binary distribution also has its own checksum files, just as the source distribution does.

NetBSD/atari System Requirements and Supported Devices

NetBSD/atari 1.5.1 runs on a TT030, Falcon and Hades. An FPU is not required. The minimum amount of RAM required is 4 MB. On the Hades, only the Tseng PCI VGA cards (ET4000/ET6000/ET6100) are supported in the 1.5.1 release. When an unsupported video card is present, you can use NetBSD with a serial console only.

Here is a table of recommended HD partition sizes for a full install:

Partition Suggested + X Needed + X
root (/) 25 MB 25 MB 20 MB 20 MB
/usr 245 MB 270 MB 120 MB 145 MB
/var 20 MB 20 MB 5 MB 5 MB
swap 2*RAM below 32 MB, then up to you

Anything else is up to you!

In addition of the rule of thumb for the swap size mentioned below, you probably want to make sure that the size of the swap partition does not drop below 20 MB (30 MB for systems with X). Another item is the add-on packages. You might want 20-30M (or more) in /usr/local (or added to /usr) to store packages from the NetBSD package system. As you may note the recommended size of /usr is 125 MB greater than needed. This is to leave room for a kernel source and compile tree as you will probably want to compile your own kernel. (GENERIC is large and bulky to accommodate all people, BOOT is small and might not have all the features you want).

Supported devices

  • The builtin SCSI host adapter
    - Should support most SCSI-drives.
    - Should support most tape drives.
    - Should support most CD-ROM drives.
    - Should support most ZIP/M-O drives.

  • The builtin video controller

  • The builtin (720 KB / 1.44 MB) floppy drive

  • The serial2/modem2 ports

  • The Falcon FX memory expansion

  • The Atari mouse

  • A 3-button mouse (see build description in the FAQ!)

  • The parallel printer

  • IDE interface on both Falcon and Hades (includes ATAPI support)

  • The serial interface on the first 68901 UART (modem1)

  • VME-bus devices (TT030/Hades)
    - BVME410 ethernet
    - Circad Leonardo 24-bit VME graphics adapter
    - Crazy Dots VME et4000 graphics adapter
    - Riebl (and possibly PAM) ethernet cards on the VME bus.

  • PCI-bus devices (Hades only)
    - ET4000/ET6000/ET6100-PCI (VGA console)
    - ESS Technology Inc. Solo-1 Soundcard

  • ISA-bus devices (Hades only)
    - Teles S0/16.3-ISA ISDN adapter (with I4B)

This list is incomplete by definition. We can not test all SCSI peripherals, ISA cards or PCI cards. If you have problems with such a peripheral, please contact the port-atari@netbsd.org mailing list.

Getting the NetBSD System on to Useful Media

Installation is supported from several media types, including:

  • GEMDOS/TOS HD partitions
  • Tape

No matter what you do, however, you'll need to have three disks handy, on which you will put the install and boot floppy images.

All the images are available from the directory installation/floppies under the root of the NetBSD/atari tree at your favorite archive site.

If you are using NetBSD/atari to make the floppies, you should use the command dd(1) to write the raw floppy images (.fs files) to the disk. As an example, to write the first part of the miniroot file system onto a 720 KB floppy in fd0 use:

       # dd if=miniroot.fs.1 of=/dev/rfd0b bs=9b

If you are using TOS to make the floppies, grab the rawwrite utility from the atari/utils directory and issue the command:


       rawwrite boot.fs

This will create the boot-floppy on the floppy in drive a. The floppies should be pre-formatted on 720 KB / 1.44 MB for both the dd and rawwrite commands to work. Pre-formatting can be best done using the desktop format command. Some other utilities seem to be giving problems.

Since the 1.3 release, it is also possible to use HD-floppies. You should than use the floppy device /dev/rfd0c or add the -H flag to rawwrite.

The steps necessary to prepare the distribution sets for installation depend on which method of installation you choose. The various methods are explained below.

GEMDOS
To install NetBSD from a GEMDOS partition, you need to get the NetBSD distribution sets you wish to install on your system on to a GEMDOS partition.

Note where you placed the files, you will need this later.

Once you have done this, you can proceed to the next step in the installation process, preparing your hard disk.

Tape
To install NetBSD from a tape, you need to somehow get the NetBSD filesets you wish to install on your system on to the appropriate kind of tape. If you make the tape on a UNIX-like system, you can create it as follows:


       # cd .../NetBSD-1.5.1/atari/binary/sets
       # T=<tape_device>
       # mt -f $T rewind
       # for f in base etc comp games man misc text
       dd if=$f.tgz of=$T conv=sync bs=5k
       # done
       # mt -f $T rewind

where ``<tape_device>'' is the name of the (non-rewinding!) tape device that you're using (probably something like /dev/nrst0, but we make no guarantees 8-). If you can't figure it out, ask your system administrator.

Once you have done this, you can proceed to the next step in the installation process, preparing your hard disk.


Preparing your System for NetBSD installation

Note you will be modifying your HD's if you mess something up here you could lose everything on all the drives that you work with. It is therefore advised that you:

  • Write down your current configurations. Do this by writing down all partition info (especially their sizes).

  • Back up the partitions you are keeping.

If NetBSD has to share the disk with another operating system, you can either take care of partitioning your harddisk before installing NetBSD or delay this until the installer requests you to do it. If you decide to do it now, please create space for at least / (root), swap and /usr partitions and possibly at least one more for /local if you have the space. Whatever you decide, take note of the paragraphs below! You need this info to create bootable disks.

Warning:
The AHDI partioning function erases all partions on your harddisk even if they are not changed! We know this is rather stupid, but don't say we didn't warn you.

If you want to use an AHDI partitioning scheme and you want to be able to boot directly into NetBSD, there are some constraints on the partition layout.

As you might know; every hard disk has a `root sector' that contains information about the size of the hard disk and the partitions on the hard disk. The root sector can only contain the neccessary data for four partitions. Nobody thought that this limitation would cause any problems. After all, 640 KByte should be enough. As hard disk grew, it was neccessary to define more than four partitions. In order to be more or less compatible with the old format, a new type of partition entry was defined: XGM partions.

An XGM partition is a `look over there' sign: Another root sector can be found at the start of the XGM partition. This root sector contains the remaining real partitions. And this is the big mystery: Partitions defined in the root sector of the hard disk are called `primary partitions', partitions defined in the root sector of an XGM partition are called `extended partitions'.

The bootblock will only work if the first NBD partition is a primary partition. This is not a limitation of NetBSD but a limitation of TOS/AHDI: You can only boot from primary partitions.

If you are creating your partitions with HDX, you'll have to be very careful to fulfill this rule. HDX has some very strange ideas when it comes to extended partitions. Fortunately, you can edit this stuff: The ``Edit partition scheme of the unit'' dialog box has a button labelled ``expert''. This button is inactive unless you have defined more than four partitions. Click on it after you have defined the sizes of the partitions.

A new dialog box appears on the screen. The left side contains two blocks of partitions: The upper block always contains the first four partitions, the lower block contains the last three partitions. If you have defined less than 7 partitions, some fields of the lower block will contain the string ``unused''. Some of the partitions will be displayed in reverse video: These are the extended partitions.

The right side contains six possible ranges for the extended partitions. It is not possible to define your own range, you will have to use one of the schemes offered by HDX. To quote from Ghostbusters: Choose and die. The default scheme used by HDX is the first scheme: Extended partitions start with the second partition and end with the second to last partition. If you have defined 7 partitions, partitions #2 to #5 will be extended partitions, while partitions #1, #6 and #7 will be primary partitions.

You can move the extended partition range by clicking on one of the buttons on the right side of the dalog box. Try to find one where your first NetBSD partition is a primary partition. Golden rules:

  • If the disk contains no GEMDOS partitions, don't use AHDI. Let NetBSD handle it alone.

  • If the disk contains one GEMDOS partition, make it partition #1 and start the extended partition range at partition #3. This allows you to boot from both the GEMDOS and the NetBSD partitions.

  • If the disk contains two GEMDOS partitions, use partitions #1 and #2 for GEMDOS, partition #3 for NetBSD-root. Start the extended partition range with partition #4.

  • If your disks contains three or more GEMDOS partitions, you are in trouble. Try using partitions #1 and #2 as the first two GEMDOS partitions. Use partition #3 as the first NetBSD partition. Start the extended partition range with partition #4. Put the other NetBSD extended partition range.

Good luck, you'll need it...

Installing the NetBSD System

Installing NetBSD is a relatively complex process, but, if you have this document in hand and are careful to read and remember the information which is presented to you by the install program, it shouldn't be too much trouble.

Before you begin, you must have already prepared your hard disk as detailed in the section on preparing your system for install.

The following is a walk-through of the steps necessary to get NetBSD installed on your hard disk. If you wish to stop the installation, you may press CONTROL-C at any prompt, but if you do, you'll have to begin again from scratch.

  1. Booting the miniroot First you need to get yourself into NetBSD. This can be done in a couple ways, both of which currently require GEMDOS. You need either the bootfloppy provided in the distribution or you can copy the loadbsd.ttp program and kernel to a boot floppy disk (1.44 MB needed) or put them on a TOS partition. Select the loadbsd program and it will ask for parameters, supply: `-b netbsd' (or whatever name you copied the kernel to). You can, of course, also run it from the shell command-line in MiNT:

           loadbsd -b a:/netbsd

    You should see the screen clear and some information about your system as the kernel configures the hardware. Then you will be prompted for a root device. At this time remove the GEMDOS kernel boot floppy from the drive if present and insert the NetBSD install floppy 1. Now type `md0a' to tell the kernel to load the install file system into RAMdisk. While While the kernel is loading, it will show a `.' for each track loaded. After loading 80 tracks, it will ask you to insert the next floppy. At this time, insert the NetBSD install floppy 2 and press any key. The kernel continous loading another 40 tracks before it continues to boot.

    Note:
    If you are using 1.44 MB floppies, you should select `md1a' instead of `md0a'.

    The system should continue to boot. For now ignore WARNING: messages about bad dates in clocks. Eventually you will be be asked to enter the pathname of the shell, just press RETURN. After a short while, you will be asked to select the type of your keyboard. After you have entered a valid response here, the system asks you if you want to install or upgrade your system. Since you are reading the install section, `i' would be the proper response here...

  2. Entering the installer The installer starts with a nice welcome message. Read this message carefully, it also informs you of the risks involved in continuing! If you still want to go on, type `y'. The installer now continues by trying to figure out your disk configuration. When it is done, you will be prompted to select a root device from the list of disks it has found.

  3. Select your root device You should know at this point that the disks are not numbered according to their SCSI-ID! The NetBSD kernel numbers the SCSI drives (and other devices on the SCSI bus) sequentially as it finds them. The drive with the lowest SCSI-ID will be called sd0, the next one sd1, etc. Where you end up after the selection of the root disk depends on the contents of your disk. If it is already partitioned using AHDI, start reading at item 4a, if this disk has no AHDI partitioning but is blank or used by another non-AHDI system, start at item 4b.

    You are now at the point of no return! The programs in section 4 will modify your harddisk. Type Control-C now if you don't want this.

  4. Setting AHDI partition ID's on your root disk (using ahdilabel) Because NetBSD imposes a special ordering in disk partitions it uses for / (root) and swap. And because it wants to guard you against an unwanted demolition of partitions used by other systems, you have to tell it what partitions it is allowed to use. You have to mark the partition you want to use as swap NBS or SWP and the other partitions as NBD. Note that all the changes you make to the ID's are reversable as long as you remember the original value. As of NetBSD1.5 ahdilabel is capable of creating or changing an AHDI compatible partioning on the disk! In the partition-ID editor, the partitions are shown in the order that AHDI created them. When you leave this editor and continue at item 4b, your changes to the ID's do have consequences to the partition order! They will show up as follows:

    a
    - the first NBD partition

    b
    - the first NBS partition

    d (and up)
    - the rest of the partitions in AHDI order

  5. Labeling your root disk (using edlabel) You are now allowed to change the partitioning of your disk. If your disk is already partitioned with AHDI, don't change anything unless you are absolutely sure what you are doing! If you are labeling an empty SCSI disk, you can make life easy for yourself by selecting ``standarize geometry''. This allows you to select a ``sectors per track'' and ``tracks/cylinder'' value and have the (fictious) SCSI geometry changed accordingly. So if you select 64 sect/track and 32 tracks/cylinder, each cylinder is exactly 1 MB in size. Well, go ahead and don't forget to save your work before you quit!

    Note:
    to make sure that NetBSD can create/mount file systems on the partitions you defined, make sure the ``type'' is entered correctly:

    4.2BSD
    - file systems created by NetBSD
    MSDOS
    - file systems shared with GEM

  6. Label additional disks Now that your root disk is labeled, you are given the opportunity to label any of the other disks in your system. The procedure is the same as with your root disk.

  7. Setup the fstab Since all disks you want to use with NetBSD are properly labeled, it is time to tell the installer which partition will be associated with the different file systems. As mentioned above, it is wise to make at least a separate / (root) and /usr file system. Depending on what you are planning to do with your system, you might also consider to make a separate /var, /local or /home. When you tell the installer that all of your file systems are specified correctly, it starts creating them for you.

  8. Configure your network Currently none of the kernels supplied in the distribution has network support builtin. If you compiled your own kernel, network configuration mostly works. [ Due to space limitiations, some of the network commands are not present on the install floppy ]

  9. Edit the fstab - again.... Since the network configuration might have lead to additional (nfs) file system entries, you get another chance to modify your fstab.

  10. Installing the distribution sets You are finally at the point where some real data will be put on your freshly-made file systems. Select the device type you whish to install from and off you go.... Some notes:

    • If you want to install from tape, please read the section about how to create such a tape. The tape device name will be nrst0 for the first tape drive, nrst1 for the second, etc.

    • Install at least the base and etc sets.

    • If you have to specify a path relative to the mount-point and you need the mount-point itself, enter `.'.

    • For previous NetBSD users: If you want to install from a GEMDOS file system, you don't need to rename the distribution sets as you may have done in previous versions of NetBSD.

  11. Timezone selection and device-node building The isn't much to say about this. Just select the timezone you are in. The installer will make the correct setup on your root file system (/). After the timezone-link is installed, the installer will proceed by creating the device nodes on your root file system under /dev. Be patient, this will take a while...

  12. Installing the kernel Because the kernel didn't fit on the install-disks, the installer asks you about the disk your kernel is on. You can specify the floppy with disk fd0, and partition `b' for 720 KB disks and partition `c' for 1.44 MB disks, or one of the hard disk partitions.

  13. Installing the bootstrap Finally, the installer ask you if you want to install the bootblock code on your root disk. This is a matter of personal choise and can also be done from a running NetBSD system. See the installboot(8) manual page about how to do this.

  14. You did it! Congratulations, you just installed NetBSD successfully! If you also installed a bootblock, you only have to reboot your Atari to enter your freshly build system. If you didn't, get back to section 1 (How to boot the miniroot). Just substitute md0a by your NetBSD root disk.
Some extra remarks
If you don't want to use the bootloader. You could use the following setup:

  • Reserve a small GEMDOS partition of about 4 MB. This is enough to put in a few kernels. Put the netbsd kernel into this partition. Also, edit your /etc/fstab to always mount this partition, say as /kernels. Now make a symlink from /netbsd to /kernels/netbsd. This sceme is particulary handy when you want to make your own kernel. When compilation is finished, you just copy your kernel to /kernels/netbsd and reboot. It's wise to make sure there is always a `known to work' kernel image present.

Post installation steps

Once you've got the operating system running, there are a few things you need to do in order to bring the system into a properly configured state, with the most important ones described below.

  1. Configuring /etc/rc.conf

    If you or the installation software haven't done any configuration of /etc/rc.conf (sysinst usually will), the system will drop you into single user mode on first reboot with the message

           /etc/rc.conf is not configured. Multiuser boot aborted.

    and with the root file system (/) mounted read-write. When the system asks you to choose a shell, simply press RETURN to get to a /bin/sh prompt. If you are asked for a terminal type, respond with vt220 (or whatever is appropriate for your terminal type) and press RETURN. You may need to type one of the following commands to get your delete key to work properly, depending on your keyboard:
           # stty erase '^h'
           # stty erase '^?'
    At this point, you need to configure at least one file in the /etc directory. You will need to mount your root filesystem read/write with:
           # /sbin/mount -u -w /
    Change to the /etc directory and take a look at the /etc/rc.conf file. Modify it to your tastes, making sure that you set rc_configured=YES so that your changes will be enabled and a multi-user boot can proceed. Default values for the various programs can be found in /etc/defaults/rc.conf, where some in-line documentation may be found. More complete documentation can be found in rc.conf(5).

    If your /usr directory is on a separate partition and you do not know how to use ed, you will have to mount your /usr partition to gain access to ex or vi. Do the following:


           # mount /usr

           # export TERM=vt220

    If you have /var on a separate partition, you need to repeat that step for it. After that, you can edit /etc/rc.conf with vi(1). When you have finished, type exit at the prompt to leave the single-user shell and continue with the multi-user boot.

    Other values that need to be set in /etc/rc.conf for a networked environment are hostname and possibly defaultroute, furthermore add an ifconfig_int for your <int> network interface, along the lines of


           ifconfig_de0="inet 123.45.67.89 netmask 255.255.255.0"

    or, if you have myname.my.dom in /etc/hosts:


           ifconfig_de0="inet myname.my.dom netmask 255.255.255.0"

    To enable proper hostname resolution, you will also want to add an /etc/resolv.conf file or (if you are feeling a little more adventurous) run named(8). See resolv.conf(5) or named(8) for more information.

    Other files in /etc that may require modification or setting up include /etc/mailer.conf, /etc/nsswitch.conf, and /etc/wscons.conf.

  2. Logging in

    After reboot, you can log in as root at the login prompt. Unless you've set a password in sysinst, there is no initial password. If you're using the machine in a networked environment, you should create an account for yourself (see below) and protect it and the ``root'' account with good passwords. Unless you have connected an unusual terminal device as the console you can just press RETURN when it prompts for Terminal type? [...].

  3. Adding accounts

    Use the useradd(8) command to add accounts to your system, do not edit /etc/passwd directly. See useradd(8) for more information on how to add a new user to the system.

  4. The X Window System

    If you have installed the X Window System, look at the files in /usr/X11R6/lib/X11/doc for information.

    Don't forget to add /usr/X11R6/bin to your path in your shell's dot file so that you have access to the X binaries.

  5. Installing third party packages

    If you wish to install any of the software freely available for UNIX-like systems you are strongly advised to first check the NetBSD package system. This automatically handles any changes necessary to make the software run on NetBSD, retrieval and installation of any other packages on which the software may depend, and simplifies installation (and deinstallation), both from source and precompiled binaries.

    • More information on the package system is at http://www.netbsd.org/Documentation/software/packages.html

    • A browsable listing of available packages is at ftp://ftp.netbsd.org/pub/NetBSD/packages/pkgsrc/README.html

    • Precompiled binaries can be found at ftp://ftp.netbsd.org/pub/NetBSD/packages, usually in the 1.5.1/atari/All subdir. You can install them with the following commands:

      # export PKG_PATH=ftp://ftp.netbsd.org/pub/NetBSD/packages/1.5.1/atari/All
      # pkg_add -v tcsh
      # pkg_add -v cvs
      # pkg_add -v apache
      # pkg_add -v perl
      ...
      

      The above commands will install the tcsh shell, the CVS source code management system, the Apache web server and the perl programming language as well as all the packages they depend on.

    • Package sources for compiling packages on your own can be obtained by retrieving the file ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/tar_files/pkgsrc.tar.gz They are typically extracted into /usr/pkgsrc (though other locations work fine), with the commands:


             # mkdir /usr/pkgsrc
             #( cd /usr/pkgsrc ; tar -zxpf - ) < pkgsrc.tar.gz

      After extracting, then see the README file in the extraction directory (e.g. /usr/pkgsrc/README) for more information.

  6. Misc

    • Edit /etc/mail/aliases to forward root mail to the right place. Don't forget to run newaliases(1) afterwards.

    • The /etc/mail/sendmail.cf file will almost definitely need to be adjusted; files aiding in this can be found in /usr/share/sendmail. See the README file there for more information.

    • Edit /etc/rc.local to run any local daemons you use.

    • Many of the /etc files are documented in section 5 of the manual; so just invoking


             # man 5 filename

      is likely to give you more information on these files.


Upgrading a previously-installed NetBSD System

Before updating, you probably would want to backup your original file systems!

The update procedure will not overwrite or remove any files not present in the sets you install. If you've replaced programs present in the distribution, you have to replace them again after you did the update. The etc-set needs special caution. You generally don't want to install this one when upgrading. It is recommended that you get a copy of this set and carefully upgrade your configuration files by hand.

  1. Starting the upgrade

    Ok, let's go. Insert the bootfloppy and follow the `normal' installation procedure until it asks you if you wish to install or upgrade. At this time, select upgrade. You will now be greeted and reminded of the fact that this is a potential dangerous procedure and that you should not upgrade the etc-set.

  2. Selecting your root disk

    When you decide to proceed, you will be prompted to enter your root disk. After you've done this, it will be checked automatically to make sure that the file system is in a sane state before making any modifications. After this is done, you will be asked if you want to configure your network. You can skip this section on NetBSD/atari for now.

  3. Editing the fstab

    You are now allowed to edit your fstab. Normally you don't have to. Note that the upgrade-kit uses it's own copy of the fstab. Whatever you do here *won't* affect your actual fstab. After you are satisfied with your fstab, the upgrade-kit will check all file systems mentioned in it. When they're ok, they will be mounted.

  4. The actual upgrade

    You will now be asked if your sets are stored on a normally mounted file system. You should answer `y' to this question if you have the sets stored on a file system that was present in the fstab. The actions you should take for the set extraction are pretty logical (we think). You might want to read the notes in section 9 (Installing the distribution sets) of the installation section.

  5. Finishing up

    After you have extracted the sets, the upgrade kit will proceed with setting the timezone and installing the kernel and bootcode. This is all exactly the same as described in the installation section.


Compatibility Issues With Previous NetBSD Releases

Users upgrading from previous versions of NetBSD may wish to bear the following problems and compatibility issues in mind when upgrading to NetBSD1.5.1.

General issues

  • /etc/rc modified to use /etc/rc.d/*

    Prior to NetBSD1.5, /etc/rc was a traditional BSD style monolithic file; each discrete program or substem from /etc/rc and /etc/netstart has been moved into separate scripts in /etc/rc.d/.

    At system startup, /etc/rc uses rcorder(8) to build a dependency list of the files in /etc/rc.d and then executes each script in turn with an argument of `start'. Many rc.d scripts won't start unless the appropriate rc.conf(5) entry in /etc/rc.conf is set to `YES.'

    At system shutdown, /etc/rc.shutdown uses rcorder(8) to build a dependency list of the files in /etc/rc.d that have a ``KEYWORD: shutdown'' line, reverses the resulting list, and then executes each script in turn with an argument of `stop'. The following scripts support a specific shutdown method: cron, inetd, local, and xdm.

    Local and third-party scripts may be installed into /etc/rc.d as necessary. Refer to the other scripts in that directory and rc(8) for more information on implementing rc.d scripts.

Issues affecting an upgrade from NetBSD 1.4 or prior

  • named(8) leaks version information

    Previous releases of NetBSD disabled a feature of named(8) where the version number of the server could be determined by remote clients. This feature has not been disabled in NetBSD1.5, because there is a named.conf(5) option to change the version string:

     option {
         version "newstring";
     };
    

  • sysctl(8) pathname changed

    sysctl(8) is moved from /usr/sbin/sysctl to /sbin/sysctl. If you have hardcoded references to the full pathname (in shell scripts, for example) please be sure to update those.

  • sendmail(8) configuration file pathname changed

    Due to sendmail(8) upgrade from 8.9.x to 8.10.x, /etc/sendmail.cf is moved to /etc/mail/sendmail.cf. Also, the default sendmail.cf(5) refers different pathnames than before. For example, /etc/aliases is now located at /etc/mail/aliases, /etc/sendmail.cw is now called /etc/mail/local-host-names, and so forth. If you have customized sendmail.cf(5) and friends, you will need to move the files to the new locations. See /usr/share/sendmail/README for more information.

Using online NetBSD documentation

Documentation is available if you first install the manual distribution set. Traditionally, the ``man pages'' (documentation) are denoted by `name(section)'. Some examples of this are

  • intro(1),
  • man(1),
  • apropros(1),
  • passwd(1), and
  • passwd(5).

The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8.

The man command is used to view the documentation on a topic, and is started by entering man[ section] topic. The brackets [] around the section should not be entered, but rather indicate that the section is optional. If you don't ask for a particular section, the topic with the lowest numbered section name will be displayed. For instance, after logging in, enter


       # man passwd

to read the documentation for passwd(1). To view the documentation for passwd(5), enter


       # man 5 passwd

instead.

If you are unsure of what man page you are looking for, enter apropos subject-word

where subject-word is your topic of interest; a list of possibly related man pages will be displayed.

Administrivia

If you've got something to say, do so! We'd like your input. There are various mailing lists available via the mailing list server at majordomo@netbsd.org. To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instructions.

There are various mailing lists set up to deal with comments and questions about this release. Please send comments to: netbsd-comments@netbsd.org.

To report bugs, use the send-pr(1) command shipped with NetBSD, and fill in as much information about the problem as you can. Good bug reports include lots of details. Additionally, bug reports can be sent by mail to: netbsd-bugs@netbsd.org.

Use of send-pr(1) is encouraged, however, because bugs reported with it are entered into the NetBSD bugs database, and thus can't slip through the cracks.

There are also port-specific mailing lists, to discuss aspects of each port of NetBSD. Use majordomo to find their addresses, or visit http://www.netbsd.org/MailingLists/. If you're interested in doing a serious amount of work on a specific port, you probably should contact the `owner' of that port (listed below).

If you'd like to help with this effort, and have an idea as to how you could be useful, send us mail or subscribe to: netbsd-help@netbsd.org.

As a favor, please avoid mailing huge documents or files to these mailing lists. Instead, put the material you would have sent up for FTP or WWW somewhere, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it.

Thanks go to

  • The former members of UCB's Computer Systems Research Group, including (but not limited to):
    Keith Bostic
    Ralph Campbell
    Mike Karels
    Marshall Kirk McKusick
    

    for their ongoing work on BSD systems, support, and encouragement.

  • Also, our thanks go to:
    Mike Hibler
    Rick Macklem
    Jan-Simon Pendry
    Chris Torek
    

    for answering lots of questions, fixing bugs, and doing the various work they've done.

  • UC Berkeley's Experimental Computing Facility provided a home for sun-lamp in the past, people to look after it, and a sense of humor. Rob Robertson, too, has added his unique sense of humor to things, and for a long time provided the primary FTP site for NetBSD.

  • Vixie Enterprises for hosting the NetBSD FTP, SUP, and WWW servers.

  • Redback Networks, Inc. for hosting the NetBSD mail and GNATS server.

  • The Helsinki University of Technology in Finland for hosting the NetBSD CVS server.

  • The Internet Research Institute in Japan for hosting the server which runs the CVSweb interface to the NetBSD source tree.

  • The many organisations that provide NetBSD mirror sites.

  • Without CVS, this project would be impossible to manage, so our hats go off to Brian Berliner, Jeff Polk, and the various other people who've had a hand in making CVS a useful tool.

  • Dave Burgess burgess@cynjut.infonet.net has been maintaining the 386BSD/NetBSD/FreeBSD FAQ for quite some time, and deserves to be recognized for it.

  • The following individuals and organizations (each in alphabetical order) have made donations or loans of hardware and/or money, to support NetBSD development, and deserve credit for it:

    Steve Allen
    Jason Birnschein
    Mason Loring Bliss
    Jason Brazile
    Mark Brinicombe
    David Brownlee
    Simon Burge
    Dave Burgess
    Ralph Campbell
    Brian Carlstrom
    James Chacon
    Bill Coldwell
    Charles Conn
    Tom Coulter
    Charles D. Cranor
    Christopher G. Demetriou
    Scott Ellis
    Hubert Feyrer
    Castor Fu
    Greg Gingerich
    William Gnadt
    Michael Graff
    Guenther Grau
    Ross Harvey
    Charles M. Hannum
    Michael L. Hitch
    Kenneth Alan Hornstein
    Jordan K. Hubbard
    Søren Jørvang
    Scott Kaplan
    Noah M. Keiserman
    Harald Koerfgen
    John Kohl
    Chris Legrow
    Ted Lemon
    Norman R. McBride
    Neil J. McRae
    Perry E. Metzger
    Toru Nishimura
    Herb Peyerl
    Mike Price
    Dave Rand
    Michael Richardson
    Heiko W. Rupp
    Brad Salai
    Chuck Silvers
    Thor Lancelot Simon
    Bill Sommerfeld
    Paul Southworth
    Eric and Rosemary Spahr
    Ted Spradley
    Kimmo Suominen
    Jason R. Thorpe
    Steve Wadlow
    Krister Walfridsson
    Jim Wise
    Reinoud Zandijk
    Christos Zoulas
    

    AboveNet Communications, Inc.
    Advanced System Products, Inc.
    Avalon Computer Systems
    Bay Area Internet Solutions
    Brains Corporation, Japan
    Canada Connect Corporation
    Co-operative Research Centre for Enterprise Distributed Systems Technology
    Demon Internet, UK
    Digital Equipment Corporation
    Distributed Processing Technology
    Easynet, UK
    Free Hardware Foundation
    Innovation Development Enterprises of America
    Internet Software Consortium
    MS Macro System GmbH, Germany
    Numerical Aerospace Simulation Facility, NASA Ames Research Center
    Piermont Information Systems Inc.
    Precedence Technologies Ltd
    Salient Systems Inc.
    VMC Harald Frank, Germany
    Warped Communications, Inc.
    Whitecross Database Systems Ltd.
    
    (If you're not on that list and should be, tell us! We probably were not able to get in touch with you, to verify that you wanted to be listed.)

  • Finally, we thank all of the people who've put sweat and tears into developing NetBSD since its inception in January, 1993. (Obviously, there are a lot more people who deserve thanks here. If you're one of them, and would like to mentioned, tell us!)

We are...

(in alphabetical order)


The NetBSD core group:
Alistair Crooksagc@netbsd.org
Jun-ichiro itojun Haginoitojun@netbsd.org
Frank van der Lindenfvdl@netbsd.org
Luke Mewburnlukem@netbsd.org
Christos Zoulaschristos@netbsd.org

The portmasters (and their ports):
Mark Brinicombemark@netbsd.org arm32
Simon Burgesimonb@netbsd.org pmax
Jeremy Cooperjeremy@netbsd.org sun3x
Matt Fredettefredette@netbsd.org sun2
Ross Harveyross@netbsd.org alpha
Jun-ichiro itojun Haginoitojun@netbsd.org sh3
Ben Harrisbjh21@netbsd.org arm26
Eduardo Horvatheeh@netbsd.org sparc64
Darrin Jewelldbj@netbsd.org next68k
Søren Jørvangsoren@netbsd.org cobalt
Søren Jørvangsoren@netbsd.org sgimips
Wayne Knowleswdk@netbsd.org mipsco
Paul Kranenburgpk@netbsd.org sparc
Anders Magnussonragge@netbsd.org vax
Minoura Makotominoura@netbsd.org x68k
Phil Nelsonphil@netbsd.org pc532
Tohru Nishimuranisimura@netbsd.org luna68k
NONAKA Kimihirononaka@netbsd.org prep
Scott Reynoldsscottr@netbsd.org mac68k
Kazuki Sakamotosakamoto@netbsd.org bebox
Noriyuki Sodasoda@netbsd.org arc
Wolfgang Solfrankws@netbsd.org ofppc
Ignatios Souvatzisis@netbsd.org amiga
Jonathan Stonejonathan@netbsd.org pmax
Shin Takemuratakemura@netbsd.org hpcmips
Jason Thorpethorpej@netbsd.org alpha
Jason Thorpethorpej@netbsd.org hp300
Tsubai Masanaritsubai@netbsd.org macppc
Tsubai Masanaritsubai@netbsd.org newsmips
Izumi Tsutsuitsutsui@netbsd.org news68k
Frank van der Lindenfvdl@netbsd.org i386
Leo Weppelmanleo@netbsd.org atari
Nathan Williamsnathanw@netbsd.org sun3
Steve Woodfordscw@netbsd.org mvme68k

The NetBSD 1.5.1 Release Engineering team:
Chris G. Demetrioucgd@netbsd.org
Emmanuel Dreyfusmanu@netbsd.org
Håvard Eidneshe@netbsd.org
Ted Lemonmellon@netbsd.org
John Hawkinsonjhawk@netbsd.org
Perry Metzgerperry@netbsd.org
Curt Sampsoncjs@netbsd.org
Jason Thorpethorpej@netbsd.org
Todd Vierlingtv@netbsd.org

Developers and other contributors:
Steve Allenwormey@netbsd.org
Julian Assangeproff@netbsd.org
Lennart Augustssonaugustss@netbsd.org
Christoph Badurabad@netbsd.org
Dieter Barondillo@netbsd.org
Robert V. Baronrvb@netbsd.org
Jason Beeganjtb@netbsd.org
Erik Berlscyber@netbsd.org
John Birrelljb@netbsd.org
Mason Loring Blissmason@netbsd.org
Manuel Bouyerbouyer@netbsd.org
John Brezakbrezak@netbsd.org
Allen Briggsbriggs@netbsd.org
Aaron Brownabrown@netbsd.org
Andrew Brownatatat@netbsd.org
David Brownleeabs@netbsd.org
Frederick Bruckmanfredb@netbsd.org
Jon Bullerjonb@netbsd.org
Dave Burgessburgess@cynjut.infonet.net
Robert Byrnesbyrnes@netbsd.org
D'Arcy J.M. Caindarcy@netbsd.org
Dave Carrelcarrel@netbsd.org
James Chaconjmc@netbsd.org
Bill Coldwellbillc@netbsd.org
Julian Colemanjdc@netbsd.org
Chuck Cranorchuck@netbsd.org
Aidan Cullyaidan@netbsd.org
Johan Danielssonjoda@netbsd.org
Matt DeBergalisdeberg@netbsd.org
Rob Dekerdeker@netbsd.org
Chris G. Demetrioucgd@netbsd.org
Jaromír Dolecekjdolecek@netbsd.org
Andy Doranad@netbsd.org
Roland Dowdeswellelric@netbsd.org
Matthias Drochnerdrochner@netbsd.org
Jun Ebiharajun@netbsd.org
Håvard Eidneshe@netbsd.org
Enami Tsugutomoenami@netbsd.org
Bernd Ernestiveego@netbsd.org
Erik Fairfair@netbsd.org
Hubert Feyrerhubertf@netbsd.org
Thorsten Frueauffrueauf@netbsd.org
Castor Fucastor@netbsd.org
Ichiro Fukuharaichiro@netbsd.org
Brian R. Gaekebrg@dgate.org
Thomas Gernerthomas@netbsd.org
Simon J. Gerratysjg@netbsd.org
Justin Gibbsgibbs@netbsd.org
Adam Glassglass@netbsd.org
Michael Graffexplorer@netbsd.org
Brad Granthamgrantham@tenon.com
Brian C. Graysonbgrayson@netbsd.org
Matthew Greenmrg@netbsd.org
Juergen Hannken-Illjeshannken@netbsd.org
Charles M. Hannummycroft@netbsd.org
Eric Haszlakiewiczerh@netbsd.org
John Hawkinsonjhawk@netbsd.org
HAYAKAWA Koichihaya@netbsd.org
René Hexelrh@netbsd.org
Michael L. Hitchmhitch@netbsd.org
Christian E. Hoppschopps@netbsd.org
Ken Hornsteinkenh@netbsd.org
Marc Horowitzmarc@netbsd.org
Nick Hudsonskrll@netbsd.org
Martin Husemannmartin@netbsd.org
Dean Huxleydean@netbsd.org
Bernardo Innocentibernie@netbsd.org
ITOH Yasufumiitohy@netbsd.org
IWAMOTO Toshihirotoshii@netbsd.org
Matthew Jacobmjacob@netbsd.org
Lonhyn T. Jasinskyjlonhyn@netbsd.org
Chris Jonescjones@netbsd.org
Takahiro Kambetaca@netbsd.org
Antti Kanteepooka@netbsd.org
Masanori Kanaokakanaoka@netbsd.org
KAWAMOTO Yosihisakawamoto@netbsd.org
Lawrence Kestelootkesteloo@cs.unc.edu
Thomas Klausnerwiz@netbsd.org
Klaus Kleinkleink@netbsd.org
Wayne Knowleswdk@netbsd.org
John Kohljtk@netbsd.org
Kevin Laheykml@netbsd.org
Johnny C. Lamjlam@netbsd.org
Martin J. Laubachmjl@netbsd.org
Ted Lemonmellon@netbsd.org
Joel Lindholmjoel@netbsd.org
Mike Longmikel@netbsd.org
Warner Loshimp@netbsd.org
Tomasz Luchowskizuntum@netbsd.org
Federico Lupifederico@netbsd.org
Brett Lymnblymn@netbsd.org
Paul Mackerraspaulus@netbsd.org
David Maxwelldavid@netbsd.org
Dan McMahilldmcmahill@netbsd.org
Gregory McGarrygmcgarry@netbsd.org
Neil J. McRaeneil@netbsd.org
Perry Metzgerperry@netbsd.org
der Mousemouse@netbsd.org
Joseph Myersjsm@netbsd.org
Ken Nakatakenn@netbsd.org
Bob Nestorrnestor@netbsd.org
NISHIMURA Takeshinsmrtks@netbsd.org
NONAKA Kimihirononaka@netbsd.org
Jesse Offjoff@netbsd.org
Tatoku Ogaitotacha@netbsd.org
Masaru Okioki@netbsd.org
Atsushi Onoeonoe@netbsd.org
Greg Osteroster@netbsd.org
Herb Peyerlhpeyerl@netbsd.org
Matthias Pfallermatthias@netbsd.org
Dante Profetadante@netbsd.org
Chris Provenzanoproven@netbsd.org
Michael Rauchmrauch@netbsd.org
Waldi Ravenswaldi@moacs.indiv.nl.net
Darren Reeddarrenr@netbsd.org
Michael Richardsonmcr@netbsd.org
Tim Rightnourgarbled@netbsd.org
Gordon Rossgwr@netbsd.org
Heiko W. Rupphwr@netbsd.org
SAITOH Masanobumsaitoh@netbsd.org
Curt Sampsoncjs@netbsd.org
Wilfredo Sanchezwsanchez@netbsd.org
Ty Sarnatsarna@netbsd.org
SATO Kazumisato@netbsd.org
Matthias Schelertron@netbsd.org
Karl Schilke (rAT)rat@netbsd.org
Konrad Schroderperseant@netbsd.org
Reed Shadgettdent@netbsd.org
Tim Shepardshep@netbsd.org
Takao Shinoharashin@netbsd.org
Takuya SHIOZAKItshiozak@netbsd.org
Chuck Silverschs@netbsd.org
Thor Lancelot Simontls@netbsd.org
Jeff Smithjeffs@netbsd.org
Bill Sommerfeldsommerfeld@netbsd.org
Bill Squiergroo@netbsd.org
Bill Studenmundwrstuden@netbsd.org
Kevin Sullivansullivan@netbsd.org
SUNAGAWA Keikikei@netbsd.org
Kimmo Suominenkim@netbsd.org
TAMURA Kentkent@netbsd.org
Shin'ichiro TAYAtaya@netbsd.org
Matt Thomasmatt@netbsd.org
Christoph Toshoktoshok@netbsd.org
UCHIYAMA Yasushiuch@netbsd.org
Shuichiro URATAur@netbsd.org
Todd Vierlingtv@netbsd.org
Aymeric Vincentaymeric@netbsd.org
Paul Vixievixie@netbsd.org
Krister Walfridssonkristerw@netbsd.org
Lex Wennmacherwennmach@netbsd.org
Assar Westerlundassar@netbsd.org
Todd Whiteseltoddpw@netbsd.org
Rob Windsorwindsor@netbsd.org
Dan Winshipdanw@netbsd.org
Jim Wisejwise@netbsd.org
Michael Wolfsonmbw@netbsd.org
Colin Woodender@netbsd.org
Yuji Yamanoyyamano@netbsd.org
Reinoud Zandijkreinoud@netbsd.org

Legal Mumbo-Jumbo

All product names mentioned herein are trademarks or registered trademarks of their respective owners.

The following notices are required to satisfy the license terms of the software that we have mentioned in this document:

This product includes software developed by the University of California, Berkeley and its contributors. This product includes software developed by The NetBSD Foundation, Inc. This product includes software developed by the NetBSD Foundation, Inc. and its contributors. This product includes software developed by the Computer Systems Engineering Group at Lawrence Berkeley Laboratory. This product includes software developed by Adam Glass and Charles Hannum. This product includes software developed by Adam Glass and Charles M. Hannum. This product includes software developed by Adam Glass. This product includes software developed by Alistair G. Crooks. This product includes software developed by Amancio Hasty and Roger Hardiman. This product includes software developed by Berkeley Software Design, Inc. This product includes software developed by Bill Paul. This product includes software developed by Charles D. Cranor and Washington University. This product includes software developed by Charles D. Cranor. This product includes software developed by Charles Hannum, by the University of Vermont and State Agricultural College and Garrett A. Wollman, by William F. Jolitz, and by the University of California, Berkeley, Lawrence Berkeley Laboratory, and its contributors. This product includes software developed by Charles Hannum. This product includes software developed by Charles M. Hannum. This product includes software developed by Chris Provenzano. This product includes software developed by Christian E. Hopps. This product includes software developed by Christopher G. Demetriou for the NetBSD Project. This product includes software developed by Christopher G. Demetriou. This product includes software developed by Christos Zoulas. This product includes software developed by David Jones and Gordon Ross. This product includes software developed by Dean Huxley. This product includes software developed by Eric S. Hvozda. This product includes software developed by Ezra Story. This product includes software developed by Gardner Buchanan. This product includes software developed by Gordon Ross. This product includes software developed by Gordon W. Ross and Leo Weppelman. This product includes software developed by Gordon W. Ross. This product includes software developed by Hauke Fath. This product includes software developed by HAYAKAWA Koichi. This product includes software developed by Hellmuth Michaelis and Joerg Wunsch. This product includes software developed by Herb Peyerl. This product includes software developed by Holger Veit and Brian Moore for use with "386BSD" and similar operating systems. This product includes software developed by Hubert Feyrer for the NetBSD Project. This product includes software developed by Iain Hibbert. This product includes software developed by Ian W. Dall. This product includes software developed by Ignatios Souvatzis for the NetBSD Project. This product includes software developed by Jason R. Thorpe for And Communications, http://www.and.com/. This product includes software developed by Joachim Koenig-Baltes. This product includes software developed by Jochen Pohl for The NetBSD Project. This product includes software developed by John Polstra. This product includes software developed by Jonathan Stone and Jason R. Thorpe for the NetBSD Project. This product includes software developed by Jonathan Stone for the NetBSD Project. This product includes software developed by Jonathan Stone. This product includes software developed by Julian Highfield. This product includes software developed by Kenneth Stailey. This product includes software developed by Leo Weppelman. This product includes software developed by Lloyd Parkes. This product includes software developed by Manuel Bouyer. This product includes software developed by Marc Horowitz. This product includes software developed by Mark Brinicombe. This product includes software developed by Mark Tinguely and Jim Lowe. This product includes software developed by Markus Wild. This product includes software developed by Martin Husemann and Wolfgang Solfrank. This product includes software developed by Mats O Jansson and Charles D. Cranor. This product includes software developed by Mats O Jansson. This product includes software developed by Matthias Pfaller. This product includes software developed by Michael L. Hitch. This product includes software developed by Niels Provos. This product includes software developed by Paul Kranenburg. This product includes software developed by Paul Mackerras. This product includes software developed by Peter Galbavy. This product includes software developed by Philip A. Nelson. This product includes software developed by Rodney W. Grimes. This product includes software developed by Roland C. Dowdeswell. This product includes software developed by Rolf Grossmann. This product includes software developed by Scott Bartram. This product includes software developed by SigmaSoft, Th. Lockert. This product includes software developed by Tatoku Ogaito for the NetBSD Project. This product includes software developed by Terrence R. Lambert. This product includes software developed by Theo de Raadt and John Brezak. This product includes software developed by Theo de Raadt. This product includes software developed by Tohru Nishimura for the NetBSD Project. This product includes software developed by TooLs GmbH. This product includes software developed by Winning Strategies, Inc. This product includes software developed by Zembu Labs, Inc. This product includes software developed by the Center for Software Science at the University of Utah. This product includes software developed by the Computer Systems Laboratory at the University of Utah. This product includes software developed by the University of Calgary Department of Computer Science and its contributors. This product includes software developed by the University of Vermont and State Agricultural College and Garrett A. Wollman. This product includes software developed for the FreeBSD project. This product includes software developed for the Internet Software Consortium by Ted Lemon. This product includes software developed for the NetBSD Project by Frank van der Linden. This product includes software developed for the NetBSD Project by Jason R. Thorpe. This product includes software developed for the NetBSD Project by John M. Vinopal. This product includes software developed for the NetBSD Project by Matthias Drochner. This product includes software developed for the NetBSD Project by Matthieu Herrb. This product includes software developed for the NetBSD Project by Perry E. Metzger. This product includes software developed for the NetBSD Project by Piermont Information Systems Inc. This product includes software developed for the NetBSD Project by Ted Lemon. This product includes software developed by LAN Media Corporation and its contributors. This product includes software developed by Michael Graff for the NetBSD Project. This product includes software developed by Niklas Hallqvist, C Stone and Job de Haas. This product includes software developed by Eric Young (eay@mincom.oz.au). This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/). This product includes software developed by the University of Oregon. This product includes software developed by the University of Southern California and/or Information Sciences Institute. This product includes software developed by Internet Initiative Japan Inc. This product includes software developed by Reinoud Zandijk.

This product includes software developed by Thomas Gerner

This product includes software developed by Waldi Ravens.

The End