This document describes the installation procedure for
NetBSD1.5
on the
pmax
platform. It is available in four different formats titled
INSTALL.ext,
where
ext
is one of
.ps, .html, .more,
or .txt:
.ps.html.moremore(1)
and
less(1)
pager utility programs. This is the format in which the on-line
man
pages are generally presented.
.txtYou are reading the HTML version.
The
NetBSD
Operating System is a fully functional
Open Source
UNIX-like
operating system derived from the University of California, Berkeley
Networking Release 2 (Net/2), 4.4BSD-Lite, and 4.4BSD-Lite2 sources.
NetBSD
runs on thirty-one different system architectures featuring twelve distinct
families of CPUs, and is being ported to more. The
NetBSD1.5
release contains complete binary releases for fifteen different
machine types. (The sixteen remaining are not fully supported at this time
and are thus not part of the binary distribution. For information on
them, please see the
NetBSD
web site at
http://www.netbsd.org/)
NetBSD
is a completely integrated system.
In addition to its highly portable, high performance kernel,
NetBSD
features a complete set of user utilities, compilers for several
languages, the X Window System, firewall software
and numerous other tools, all accompanied by full source code.
NetBSD
is a creation of the members of the Internet community.
Without the unique cooperation and coordination the net makes
possible, it's likely that
NetBSD
wouldn't exist.
The
NetBSD1.5
release
provides numerous significant functional enhancements, including
support for many new devices, integration of hundreds of bug fixes,
new and updated kernel subsystems, and many userland enhancements. The
result of these improvements is a stable operating system fit for
production use that rivals most commercially available systems.
It is impossible to completely summarize over one year of
development that went into the
NetBSD1.5
release. Some highlights include:
As has been noted, there have also been innumerable bug fixes.
Kernel interfaces have continued to be refined, and more subsystems
and device drivers are shared among the different ports. You can look
for this trend to continue.
This is the fifth major release of
NetBSD
for the DECstation and DECsystem family of computers.
Some pmax-specific changes from the previous major release include:
The
NetBSD
Foundation has been incorporated as a non-profit
organization. Its purpose is to encourage, foster and promote the
free exchange of computer software, namely the
NetBSD
Operating
System. The foundation will allow for many things to be handled more
smoothly than could be done with our previous informal organization.
In particular, it provides the framework to deal with other parties
that wish to become involved in the
NetBSD
Project.
The
NetBSD
Foundation will help improve the quality of
NetBSD
by:
We intend to begin narrowing the time delay between releases. Our
ambition is to provide a full release every six to eight months.
We hope to support even
more
hardware in the future, and we have a
rather large number of other ideas about what can be done to improve
NetBSD.
We intend to continue our current practice of making the
NetBSD-current development source available on a daily basis.
We intend to integrate free, positive changes from whatever sources
submit them, providing that they are well thought-out and increase the
usability of the system.
Above all, we hope to create a stable and accessible system, and to be
responsive to the needs and desires of
NetBSD
users, because it is for
and because of them that
NetBSD
exists.
Refer to
http://www.netbsd.org/Sites/net.html.
The root directory of the
NetBSD1.5
release is organized as follows:
In addition to the files and directories listed above, there is one
directory per architecture, for each of the architectures for which
NetBSD1.5
has a binary distribution.
There are also
The source distribution sets can be found in subdirectories of the
All the above source sets are located in the
The source sets are distributed as compressed tar files. They may be
unpacked into
The
The split distributions may be reassembled and extracted with
cat
as follows:
In each of the source distribution set directories, there are
files which contain the checksums of the files in the directory:
The MD5 digest is the safest checksum, followed by the POSIX
checksum. The other two checksums are provided only to ensure
that the widest possible range of system can check the integrity
of the release files.
NetBSD
maintains its own set of sources for the X Window System in order to
assure tight integration and compatibility.
These sources are based on XFree86, and tightly track XFree86 releases.
They are currently equivalent to XFree86 3.3.6.
Binary sets for the X Window system are distributed with
NetBSD.
The sets are:
The pmax binary distribution sets are distributed as gzipped tar files
named with the extension
.tgz, e.g.
The instructions given for extracting the source sets work equally
well for the binary sets, but it is worth noting that if you use that
method, the files are
The minimal configuration requires 8 MB of RAM and ~60 MB of disk space.
To install the entire system requires much more disk space, and to run
X or compile the system, more RAM is recommended, as
NetBSD
with 8 MB of RAM feels like
Ultrix
with 8 MB of RAM - slow.
Note that until you have around 16 MB of RAM, getting more RAM is more
important than getting a faster CPU.
First-time installation on a bare machine is not supported, because most
DECstations do not have any suitable load device.
Some versions of the DECstation PROM are buggy and will not boot via
TFTP
and bootp; other versions are buggy and do not boot via
MOP.
The only DECstation with a floppy-disk drive is the Personal DECstation,
and that device is not supported as a boot device.
The recommended installation procedure is to boot an install kernel
via
TFTP,
or to use a
``helper''
system to write a miniroot diskimage onto a disk, move that
disk to the target installation system, and then boot the miniroot.
Installation is supported from several media types, including:
The steps necessary to prepare the distribution sets for installation
depend upon which installation medium you choose.
The steps for the various media are outlined below.
Proceed to the instruction on installation.
Once you have this information, you can proceed to the next
step in the installation or upgrade process.
If you're installing
NetBSD
from scratch, go to the section on preparing your hard disk, below.
If you're upgrading an existing installation, go directly to
the section on upgrading.
You need to know the numeric IP address of the NFS server,
and, if the server is not on a network directly connected to
the machine on which you're installing or upgrading
NetBSD,
you need to know the numeric IP address of the router closest
to the
NetBSD
machine.
Finally, you need to know the numeric IP address of the
NetBSD
machine itself.
Once the NFS server is set up properly and you have the
information mentioned above, you can proceed to the next step
in the installation or upgrade process.
If you're installing
NetBSD
from scratch, go to the section on preparing your hard disk, below.
If you're upgrading an existing installation, go directly to the
section on upgrading.
If you're making the tape on a
UNIX-like
system, the easiest way
to do so is probably something like:
where
tape_device
is the name of the tape device that
describes the tape drive you're using; possibly
Once you have the files on the tape, you can proceed to the
next step in the installation or upgrade process.
If you're installing
NetBSD
from scratch, go to the section on preparing your hard disk, below.
If you're upgrading an existing installation, go directly to the section
on upgrading.
Place the distribution sets you wish to upgrade somewhere in
your current file system tree.
At a bare minimum, you must upgrade the
base
and
kern
binary distributions, and so must put the
base
and
kern
sets somewhere in your file system.
If you wish, you can do the other sets, as well, but you should
not
upgrade the
etc
distribution; it contains contains system configuration files
that you should review and update by hand.
Once you have done this, you can proceed to the next step in
the upgrade process, actually upgrading your system.
First and foremost, before beginning the installation process,
make sure you have a reliable backup
of any data on your hard disk that you wish to keep. Mistakes in
partitioning your hard disk may lead to data loss.
To install or upgrade
NetBSD,
you need to first boot an installation
program and then interact with the screen-menu program
sysinst.
The installation program actually consists of the
NetBSD
kernel plus
an in-memory file system of utility programs.
From most convenient to least convenient, the installation methods
are:
You should familiarize yourself with the console PROM environment
and the hardware configuration. The PROMs on the older DECstation
2100 and 3100 use one syntax. The PROMs on the TurboChannel machines
use a completely different syntax. Be sure you know how to print
the configuration of your machine, and how to boot from disk or
network, as appropriate.
To boot from disk, use:
To boot via TFTP, use:
To boot via MOP, use:
You will also need to know the total size (in sectors) and the
approximate geometry of the disks you are installing onto, so that you
can label your disks for the
BSD
fast file system (FFS). For most SCSI
drives (including all SCSI-2 drives), the kernel will correctly detect
the disk geometry. The
sysinst
tool will suggest these as the default.
If you're installing
NetBSD/pmax
for the first time it's a very
good idea to pre-plan partition sizes for the disks on which you're
installing
NetBSD.
Changing the size of partitions after you've
installed is difficult. If you do not have a spare bootable disk, it
may be simpler to re-install
NetBSD
again from scratch.
Assuming a classic partition scheme with separate
To mount the CD-ROM from a
NetBSD/pmax
host, type
and from an
Ultrix
host
where
X
is the SCSI-ID of the CD-ROM.
The diskimage file can be found on the CD-ROM at the following location
(relative to the mount point of the CD)
and the diskless boot tar file can be found at
Once you have located these files, continue on to either
Install via netboot install kernel,
Install via diskless boot,
Install via diskimage
or
Installing from an existing system
section later in the INSTALL notes.
in the
NetBSD1.5
distribution. To install the new bootblocks,
use the following commands:
where
X
is your boot disk SCSI-ID.
With new
NetBSD
bootblocks or using the
Ultrix
bootloader, you can boot the kernel located in:
On
Ultrix
systems you will need to
gunzip
this kernel before booting it.
A copy of the
gunzip
binary for
Ultrix
systems is located in:
Then boot using one of:
where
X
is your boot disk SCSI-ID, and continue to the
Once you've booted the diskimage
section
It is shipped compressed and is around 1150 kbytes, uncompressing to
exactly 2 MB.
To install the diskimage onto disk
When installing on a disk with no
NetBSD
or
Ultrix
label, you may get a
message like:
or when installing on an old
Ultrix
disk, you may get a message like:
when issuing the
disklabel -W /dev/rrzXc
command. This can safely be ignored.
Most other
NetBSD
ports are similar, but use
`rsdXc'
instead of
`rrzXc'.
On
NetBSD/i386,
the
``raw disk partition''
is the
`
On
NetBSD,
be sure to use
disklabel -W
to enable writing to the label
area of the disk. If you forget this and/or use the
`block'
device, the
dd
command may silently fail.
On
Ultrix
systems, do:
A copy of the
gunzip
program is located in
if you do not already have it.
On
MS-DOS,
use an
`unzip'
utlility, then use
rawrite.
Then boot using one of:
where
X
is your boot disk SCSI-ID, and continue to the
Once you've booted the diskimage
section.
You will need to set up servers for BOOTP and TFTP.
For the BOOTP server you need to specify the:
Here's an example for a
UNIX-like
system running
bootpd:
And here's an example for a
UNIX-like
system running the ISC
dhcpd:
For the TFTP server, You will need to copy the
install.ecoff
kernel to the directory used by the TFTP server. This file must be
gunzipped.
Then boot using one of:
and continue to the
Once you've booted the diskimage
section.
Since the system install utility, sysinst, requires a read/write root,
installing via diskless boot is only feasible if your NFS server exports
the diskless root read-write. If this is not possible, you should
install via other of the other installation procedures.
Once you have booted the kernel, continue to the
Once you've booted the diskimage
section.
The system will then start the
sysinst
program.
Using
sysinst,
installing
NetBSD
is a relatively easy process. You
still should read this document and have it in hand when doing the
installation process. This document tries to be a good guideline
for the installation and as such covers many details to be completed.
Do not let this discourage you, the install program is not hard
to use.
The following is a walk-through of the steps you will take while
getting
NetBSD
installed on your hard disk.
sysinst
is a menu driven
installation system that allows for some freedom in doing the
installation. Sometimes, questions will be asked and in many cases
the default answer will be displayed in brackets
(``[ ]'')
after the question. If you wish to stop the installation, you may press
First, let's describe a quick install. The other sections of
this document go into the installation procedure in more
detail, but you may find that you do not need this. If you
want detailed instructions, skip to section 3. This section
describes a basic installation, using a CD-ROM install as
an example.
Boot the system as described in the previous section.
You may want to read the
boot messages, to notice your disk's name and geometry. Its name
will be something like
Once
NetBSD
has booted and printed all the boot messages,
you will be presented with a welcome message and a main menu.
It will also include instructions for using the menus.
If you will not use network operation during the installation,
but you do want your machine to be configured for networking once
it is installed, you should first go to the utilities menu, and select
Configure network option.
If you only want to temporarily
use networking during the installation, you can specify these
parameters later. If you are not using Domain Name Service (DNS),
you can give an empty response in reply to answers relating to
this.
To start the installation, select the menu option to install
NetBSD
from the main menu.
The first thing is to identify the disk on which you want to
install
NetBSD.
sysinst
will report a list of disks it finds
and ask you for your selection. Depending on how many disks
are found, you may get a different message. You should see
disk names like
You will be asked if you want to use the entire disk or
only part of the disk. If you decide to use the entire disk
for
NetBSD,
it will be checked if there are already other
systems present on the disk, and you will be asked to confirm
whether you want to overwrite these.
The partition table of the
NetBSD
part of a disk is called a
disklabel.
There are 3 layouts for the
NetBSD
part of the disk that you can pick from:
Standard, Standard with X
and
Custom.
The first two use a set of default
values (that you can change) suitable for a normal
installation, possibly including X. The last option
lets you specify everything yourself.
You will be presented with the current layout of the
NetBSD
disklabel, and given a chance to change it.
For each partition, you can set the type, offset and size,
block and fragment size, and the mount point. The type
that
NetBSD
uses for normal file storage is called
4.2BSD.
A swap partition has a special type called
swap.
Some partitions in the disklabel have a fixed purpose.
You will then be asked to name your disk's disklabel. The
default response is
mydisk.
For most purposes this will be OK.
If you choose to name it something different, make sure the name
is a single word and contains no special characters. You don't
need to remember this name.
You are now at the point of no return.
Nothing has been
written to your disk yet, but if you confirm that you want to
install
NetBSD,
your hard drive will be modified. If you are
sure you want to proceed, enter
The install program will now label your disk and make the file
systems you specified. The file systems will be initialized to
contain
NetBSD
bootstrapping binaries and configuration files.
You will see messages on your screen from the various
NetBSD
disk preparation tools that are running. There should be no
errors in this section of the installation. If there are,
restart from the beginning of the installation process.
Otherwise, you can continue the installation program
after pressing the return key.
The
NetBSD
distribution consists of a number of
sets,
that come in the form of gzipped tarfiles. A few sets must be
installed for a working system, others are optional. At this
point of the installation, you will be presented with a menu
which enables you to choose from one of the following methods
of installing the sets. Some of these methods will first
load the sets on your hard disk, others will extract the sets
directly.
For all these methods, the first step is making the sets
available for extraction, and then do the actual installation.
The sets can be made available in a few different ways. The
following sections describe each of those methods. After
reading the one about the method you will be using, you
can continue to section labeled
`Extracting the distribution sets'
To be able to install using ftp, you first need to configure
your network setup, if you haven't already at the start of
the install procedure.
sysinst
will do this for you, asking you
to provide some data, like IP number, hostname, etc. If you
do not have name service set up for the machine that you
are installing on, you can just press
You will also be asked to specify the host that you want
to transfer the sets from, the directory on that host,
and the account name and password used to log into that
host using ftp. If you did not set up DNS when answering
the questions to configure networking, you will need to
specify an IP number instead of a hostname for the ftp
server.
sysinst
will proceed to transfer all the default set files
from the remote site to your hard disk.
To be able to install using NFS, you first need to configure
your network setup, if you haven't already at the start of
the install procedure.
sysinst
will do this for you, asking you
to provide some data, like IP number, hostname, etc. If you
do not have name service set up for the machine that you
are installing on, you can just press
You will also be asked to specify the host that you want
to transfer the sets from, and the directory on that host
that the files are in. This directory should be mountable
by the machine you are installing on, i.e. correctly
exported to your machine.
If you did not set up DNS when answering the questions to
configure networking, you will need to specify an IP number
instead of a hostname for the NFS server.
When installing from a CD-ROM, you will be asked to specify
the device name for your CD-ROM player
(usually
sysinst
will then check if the files are indeed available
in the specified location, and proceed to the actual
extraction of the sets.
In order to install from a local file system, you will
need to specify the device that the file system resides
on
(for example
This option assumes that you have already done some preparation
yourself. The sets should be located in a directory on a
file system that is already accessible.
sysinst
will ask you
for the name of this directory.
After the install sets containing the
NetBSD
distribution
have been made available, you can either extract all the
sets (a full installation), or only extract sets that
you have selected. In the latter case you will be shown the
currently selected sets, and given the opportunity to select
the sets you want. Some sets always need to be installed
(kern, base and etc)
they will not be shown in this selection menu.
Before extraction begins, you can elect to watch the files being
extracted; the name of each file that is extracted will be shown.
This can slow down the installation process considerably, especially
on machines with slow graphics consoles or serial consoles.
After all the files have been extracted, all the necessary
device node files will be created. If you have already
configured networking, you will be asked if you want to
use this configuration for normal operation. If so, these
values will be installed in the network configuration files.
The next menu will allow you to select the time zone that you're in,
to make sure your clock has the right offset from GMT.
Finally you can set a password for the "root" account, to prevent
the machine coming up without access restrictions.
Congratulations, you have successfully installed
NetBSD1.5.
You can now reboot the machine, and boot
NetBSD
from harddisk.
Once you've got the operating system running, there are a few
things you need to do in order to bring the system into a properly
configured state, with the most important ones described below.
If you or the installation software haven't done any configuration of
and with the root file system
(
If your
If you have
Other values that need to be set in
or, if you have
myname.my.dom
in
To enable proper hostname resolution, you will also want to add an
Other files in
After reboot, you can log in as
Use the
If you have installed the X window system, look at the files in
Don't forget to add
If you wish to install any of the software freely available for
UNIX-like
systems
you are strongly advised to first check the
NetBSD
package system. This automatically handles any changes necessary to
make the software run on
NetBSD,
retrieval and installation of any other packages on which the software
may depend, and simplifies installation (and deinstallation), both
from source and precompiled binaries.
After extracting, then see the
is likely to give you more information on these files.
The upgrade to
NetBSD1.5
is a binary upgrade; it can be quite difficult
to advance to a later version by recompiling from source due primarily
to interdependencies in the various components.
To do the upgrade, you must install new bootblocks and boot off
the
install
kernel as described in the
Installing from an existing system
section.
You must also have at least the
base
and
kern
binary distribution sets available, so that you can upgrade with them,
using one of the upgrade methods described above. Finally, you must
have sufficient disk space available to install the new binaries.
Since the old binaries are being overwritten in place, you only need
space for the new binaries, which weren't previously on the system.
If you have a few megabytes free on each of your root
(
Since upgrading involves replacing the boot blocks on your
NetBSD
partition, the kernel, and most of the system binaries, it has the
potential to cause data loss. You are strongly advised to
back up any important data on your disk,
whether on the
NetBSD
partition or on
another operating system's partition, before beginning the upgrade
process.
The upgrade procedure using the
sysinst tool is similar to
an installation, but without the hard disk partitioning.
Another difference is that existing configuration files in
After a new kernel has been copied to your hard disk, your
machine is a complete
NetBSD1.5
system. However, that
doesn't mean that you're finished with the upgrade process.
You will probably want to update the set of device
nodes you have in
You must also deal with certain changes in the formats of
some of the configuration files. The most notable change is
that the options given to many of the file systems in
Finally, you will want to delete old binaries that were part
of the version of
NetBSD
that you upgraded from and have since been removed from the
NetBSD
distribution.
Users upgrading from previous versions of
NetBSD
may wish to bear the
following problems and compatibility issues in mind when upgrading to
NetBSD1.5.
In previous releases of
NetBSD,
At system startup,
At system shutdown,
Local and third-party scripts may be installed into
Previous releases of
NetBSD
disabled a feature of
Due to
Documentation is available if you first install the manual
distribution set. Traditionally, the
``man pages''
(documentation) are denoted by
`
The section numbers group the topics into several categories, but three
are of primary interest: user commands are in section 1, file formats
are in section 5, and administrative information is in section 8.
The man
command is used to view the documentation on a topic, and is
started by entering
man[ section]
topic.
The brackets
[]
around the
section should not be entered, but rather indicate that the section is
optional. If you don't ask for a particular section, the topic with the
lowest numbered section name will be displayed. For instance, after
logging in, enter
to read the documentation for
instead.
If you are unsure of what man page you are looking for, enter
apropos subject-word
where
subject-word
is your topic of interest; a list of possibly
related man pages will be displayed.
If you've got something to say, do so! We'd like your input.
There are various mailing lists available via the mailing list
server at
majordomo@netbsd.org.
To get help on using the mailing
list server, send mail to that address with an empty body, and it will
reply with instructions.
There are various mailing lists set up to deal with comments and
questions about this release. Please send comments to:
netbsd-comments@netbsd.org.
To report bugs, use the
Use of
There are also port-specific mailing lists, to discuss aspects of
each port of
NetBSD.
Use majordomo to find their addresses, or visit
http://www.netbsd.org/MailingLists/.
If
you're interested in doing a serious amount of work on a specific
port, you probably should contact the
`owner'
of that port (listed
below).
If you'd like to help with this effort, and have an idea as to how
you could be useful, send us mail or subscribe to:
netbsd-help@netbsd.org.
As a favor, please avoid mailing huge documents or files to these
mailing lists. Instead, put the material you would have sent up
for FTP or WWW somewhere, then mail the appropriate list about it, or, if
you'd rather not do that, mail the list saying you'll send the data
to those who want it.
for their ongoing work on
BSD
systems, support, and encouragement.
for answering lots of questions, fixing bugs, and doing the various work
they've done.
(in alphabetical order)
Changes Since The Last Release
Kernel
ktruss(1).
swapctl(8).
Networking
pcap(3)
is incremented and you may need to recompile userland tools.
The KAME IPv6 part includes results from the unified-ipv6 effort.
File system
/)
on a RAID set.
rpc.lockd(8))
now works.
Security
sysctl(3)
interfaces to various elements of process and system information,
allowing programs such as
ps(1),
dmesg(1)
and the like to operate without recompilation after kernel upgrades,
and remove the necessity to run setgid kmem (thus improving system
security).
System administration and user tools
rc(8)
system startup and shutdown scripts to an
`rc.d'
mechanism, with separate control scripts for each service, and
appropriate dependency ordering provided by
rcorder(8).
postfix(1)
provided as alternative mail transport agent to
sendmail(8).
useradd(8),
usermod(8),
userdel(8),
groupadd(8),
groupmod(8),
and
groupdel(8)
added to the system.
/etc/login.conf)
from
BSD/OS.
at(1)
and
w(1).
ftpd(8)
providing features found in larger and less secure FTP daemons,
such as user classes, connection limits, improved support for
virtual hosting, transfer statistics, transfer rate throttling,
and support for various IETF ftpext working group extensions.
ftp(1)
client has been improved even further, including
transfer rate throttling, improved URL support, command line uploads.
See the man page for details.
Miscellaneous
/usr/share/misc/style)
to use ANSI C only (instead of K&R) and reflect current (best) practice,
and begin migrating the
NetBSD
source code to follow it.
curses(3)
library, including support for color.
file(1),
ipfilter(4),
ppp(4),
and
sendmail(8)
to the latest stable release.
The Future of NetBSD
Sources of NetBSD
NetBSD 1.5 Release Contents
.../NetBSD-1.5/
CHANGESLAST_MINUTEMIRRORSREADME.filesTODOpatches/source/README.export-control
files sprinkled liberally throughout the
distribution tree, which point out that there are some portions of the
distribution that may be subject to
export regulations of the United States, e.g.
code under
src/crypto
and
src/sys/crypto.
It is your responsibility
to determine whether or not it is legal for you to export these portions
and to act accordingly.
source
subdirectory of the distribution tree. They contain the
complete sources to the system. The source distribution sets
are as follows:
22.3 MB gzipped, 98.8 MB uncompressed
5.6 MB gzipped, 57.0 MB uncompressed
3.3 MB gzipped, 13.2 MB uncompressed
24.2 MB gzipped, 120.6 MB uncompressed
config(8),
and
dbsym(8).
17.6 MB gzipped, 88.6 MB uncompressed
35.2 MB gzipped, 176.8 MB uncompressed
source/sets
subdirectory of the distribution tree.
/usr/src
with the command:
#( cd / ; tar -zxpf - ) < set_name.tgz
sets/Split/
subdirectory contains split
versions of the source sets for those users who need to load the
source sets from floppy or otherwise need a split distribution. The
split sets are named
set_name.xx
where
set_name
is the distribution set name, and
xx
is the sequence number of the file,
starting with
``aa''
for the first file in the distribution set, then
``ab''
for the next, and so on. All of these files except the last one
of each set should be exactly 240,640 bytes long. (The last file is
just long enough to contain the remainder of the data for that
distribution set.)
# cat set_name.?? | ( cd / ; tar -zxpf - )
BSDSUMCKSUMMD5SYSVSUMNetBSD/pmax subdirectory structure
The pmax-specific portion of the
NetBSD1.5
release is found in the
pmax
subdirectory of the distribution:
.../NetBSD-1.5/pmax/
INSTALL.htmlINSTALL.psINSTALL.txtINSTALL.more.more file contains underlined text using the
more(1)
conventions for indicating italic and bold display.
binary/
kernel/
netbsd.GENERIC.gzsets/installation/
floppy/misc/Binary distribution sets
The
NetBSD
pmax
binary distribution sets contain the binaries which
comprise the
NetBSD1.5
release for the pmax. There are eight binary distribution sets.
The binary distribution sets can be found in the
pmax/binary/sets
subdirectory
of the
NetBSD1.5
distribution tree, and are as follows:
19.0 MB gzipped, 61.2 MB uncompressed
/usr/include)
and the various system libraries (except the shared
libraries, which are included as part of the
base
set). This set also includes the manual pages for
all of the utilities it contains, as well as the
system call and library manual pages.
13.4 MB gzipped, 57.2 MB uncompressed
/etc
and in several other places. This set
must
be installed if you are installing the system from scratch, but should
not
be used if you are upgrading. (If you are upgrading,
it's recommended that you get a copy of this set and
carefully
upgrade your configuration files by hand.)
0.1 MB gzipped, 0.6 MB uncompressed
3.0 MB gzipped, 7.9 MB uncompressed
GENERIC
kernel, named
/netbsd.
You must
install this distribution set.
1.1 MB gzipped, 2.7 MB uncompressed
5.0 MB gzipped, 19.9 MB uncompressed
/usr/share.
2.6 MB gzipped, 10.1 MB uncompressed
groff(1),
all related programs, and their manual pages.
1.3 MB gzipped, 5.6 MB uncompressed
3.2 MB gzipped, 11.4 MB uncompressed
2.1 MB gzipped, 9.5 MB uncompressed
0.2 MB gzipped, 0.8 MB uncompressed
6.2 MB gzipped, 7.5 MB uncompressed
base.tgz.
/-relative
and therefore are extracted
below
the current directory. That
is, if you want to extract the binaries into your system, i.e.
replace the system binaries with them, you have to run the
tar -xpf
command from
/.
NetBSD/pmax System Requirements and Supported Devices
Supported machines
Unsupported machines
Supported devices
Unsupported devices
Getting the NetBSD System on to Useful Media
204.152.184.75
(as of October, 2000).
/etc/exports
file on of the NFS server and resetting its mount daemon (mountd).
(Both of these actions will probably require superuser
privileges on the server.)
# tar -cf tape_device dist_directories
/dev/rst0,
or something similar, but it will vary from system to system.
(If you can't figure it out, ask your system administrator.)
In the above example,
dist_directories
are the
distribution sets' directories, for the distribution sets you
wish to place on the tape.
For instance, to put the
misc, base, and etc
distributions on tape (in
order to do the absolute minimum installation to a new disk),
you would do the following:
# cd .../NetBSD-1.5
# cd pmax/binary
# tar -cf tape_device misc etc kern
Preparing your System for NetBSD installation
Installing the NetBSD System
/).
See the
Installing from an existing system
section later in these INSTALL notes.
/
(root)
and
/usr
file systems, a comfortable size for the
NetBSD
/
partition is about 32 MB.
A good initial size for the swap partition is twice the
amount of physical memory in your machine (though, unlike
Ultrix,
there are no restrictions on the size of the swap partition that would render
part of your memory unusable). The default swap size is 64 MB, which
is adequate for doing a full system build. A full binary installation,
with X11R6.3 takes about 150 MB in
/usr;
a 200 MB
/usr
should be ample.
Install via a NetBSD CD-ROM
You can obtain the disk image or diskless boot tar file from the
NetBSD1.5
CD-ROM.
# mount -r -t cd9660 /dev/rzXc /mnt
# mount -r -t cdfs -o nodefperm,noversion /dev/rzXc /mnt
NetBSD-1.4.3
would show up as
NetBSD-1.3.
pmax/installation/diskimage/diskimage.gz
pmax/installation/netboot/diskimage.tgz
Installing from an existing system
pmax/installation/misc/bootblocks.tgz
# cd /
# tar -zxpvf .../pmax/installation/misc/bootblocks.tgz
# /usr/mdec/installboot /dev/rrzXc /usr/mdec/bootxx_ffs
pmax/binary/kernel/install.gz
pmax/installation/misc/gunzip.ultrix
Install via diskimage
The diskimage file is in
pmax/installation/diskimage/diskimage.gz.
rzX
on a
NetBSD/pmax
system, do:
# disklabel -W /dev/rrzXc
# gunzip -c diskimage.gz | dd of=/dev/rrzXc bs=10240
rzX: WARNING: trying Ultrix label, no disk label
rzX: WARNING: using ULTRIX partition information
d'
parttion, so do:
# disklabel -W /dev/rsdXd
# gunzip -c diskimage.gz | dd of=/dev/rsdXd bs=10240
# gunzip -c diskimage.gz | dd of=/dev/rrzXc bs=10240
pmax/installation/misc/gunzip.ultrix
Install via netboot install kernel
Booting
NetBSD/pmax
1.5 install kernel over a network requires a BOOTP
or DHCP server and a TFTP server. (These are usually all run on the
same machine.) There are two basic stages to the boot:
myhost.mydom.com:\
:ht=ethernet:ha=08002b123456:\
:ip=192.168.1.2:sm=255.255.255.0:\
:sa=192.168.1.1:bf=install:\
:rp=/usr/export/pmax:
host pmax {
hardware ethernet 08:0:2b:12:34:56;
fixed-address 192.168.1.2;
option host-name "myhost.mydom.com";
filename "install";
option domain-name-servers 192.168.1.1;
option broadcast-address 255.255.255.0;
option domain-name "my.domain";
option root-path "/usr/export/pmax";
}
Install via diskless boot
The file
pmax/installation/netboot/diskimage.tar.gz
contains a suitable set of files for installing on an NFS server to set
up a diskless root filesytem. (It is a tar copy of the contents of an
installation ramdisk file system contained in the install kernel.) You
will need to find an NFS server, unpack the tarfile, and setup
BOOTP/dhcp service for your pmax. Instructions for setting up
an NFS server and diskless booting are on the
NetBSD/pmax
netboot
webpage at
http://www.netbsd.org/Ports/pmax/netboot.html
Once you've booted the diskimage
Once you'e booted the installation kernel you will need to
select your terminal type. Use
pmax
for a framebuffer console,
vt100
for a serial console with a vt100-compatible terminal, or
xterm
or
xterms
for a
tip(1)
or
cu(1)
connection running in an
xterm(1).
Running the sysinst installation program
CONTROL-C
at any time, but if you do, you'll have to begin the installation
process again from scratch.
root,
and set a password for that account. You are also
advised to edit the file
/etc/rc.conf
to match your system needs.
/usr/X11R6/lib/X11/doc.
Further information can be found on
http://www.xfree86.org/
sd0
and the geometry will be
printed on a line that begins with its name. As mentioned above,
you may need your disk's geometry when creating
NetBSD's
partitions.
You will also need to know the name, to tell
sysinst
on which disk
to install.
The most important thing to know is that
sd0
is your first SCSI disk,
sd1
the second, etc.
rz0
or
rz1
a/),
bcd-hd
is the partition mounted on
/usr,
but this is historical practice and not a fixed value.
yes
at the prompt.
RETURN
in answer to these questions, and DNS will not be used.
RETURN
in answer to these questions, and DNS will not be used.
cd0),
and the directory name on the CD-ROM where the distribution files are.
rz1e)
the type of the file system,
and the directory on the specified file system where the sets are located.
sysinst
will then check if it
can indeed access the sets at that location.
Post installation steps
/etc/rc.conf
/etc/rc.conf,
the system will drop you into single user mode on first reboot with the
message
/etc/rc.conf is not configured. Multiuser boot aborted.
/)
mounted read-write. When the system
asks you to choose a shell, simply press
RETURN
to get to a prompt. If you are asked for a terminal type, respond with
the correct terminal type as discussed in the
Once you've booted the diskimage
section.
and press
RETURN.
At this point, you need to configure at least
one file in the
/etc
directory. Change to the
/etc
directory and take a look at the
/etc/rc.conf
file. Modify it to your tastes, making sure that you set
rc_configured=YES
so that your changes will be enabled and a multi-user boot can
proceed.
Default values for the various programs can be found in
/etc/defaults/rc.conf, where some in-line documentation may be found.
More complete documentation can be found in
rc.conf(5).
/usr
directory is on a separate partition and you do not know how to use
ed,
you will have to mount your
/usr
partition to gain access to
ex
or
vi.
Do the following:
# mount /usr
# export TERM=termtype
/var
on a separate partition, you need to repeat
that step for it. After that, you can edit
/etc/rc.conf
with
vi(1).
When you have finished, type
exit
at the prompt to
leave the single-user shell and continue with the multi-user boot.
/etc/rc.conf
for a networked environment are
hostname and possibly
defaultroute,
furthermore add an
ifconfig_int
for your interface
<int>,
along the lines of
ifconfig_le0="inet 123.45.67.89 netmask 255.255.255.0"
/etc/hosts:
ifconfig_le0="inet myname.my.dom netmask 255.255.255.0"
/etc/resolv.conf
file or (if you are feeling a little more adventurous) run
named(8).
See
resolv.conf(5)
or
named(8)
for more information.
/etc
that may require modification or setting up include
/etc/mailer.conf,
/etc/nsswitch.conf,
and
/etc/wscons.conf.
root
at the login prompt. There
is no initial password, but if you're using the machine in a
networked environment, you should create an account for yourself
(see below) and protect it and the
``root''
account with good passwords.
Unless you have connected an unusual terminal device as the console
you can just press
RETURN
when it prompts for
Terminal type? [...]
useradd(8)
command to add accounts to your system,
do not
edit
/etc/passwd
directly. See
useradd(8)
for more information on how to add a new user to the system.
/usr/X11R6/lib/X11/doc
for information.
/usr/X11R6/bin
to your path in your shell's dot file so that you have access to the X binaries.
/usr/pkgsrc
(though other locations work fine), as with the command:
# mkdir /usr/pkgsrc; tar -C /usr/pkgsrc -zxpf pkgsrc.tar.gz
README
file in the extraction directory (e.g.
/usr/pkgsrc/README)
for more information.
/etc/mail/aliases
to forward root mail to the right place (run
newaliases(1)
afterwards.)
/etc/mail/sendmail.cf
file will almost definitely need to be adjusted;
files aiding in this can be found in
/usr/share/sendmail.
See the
README
file there for more information.
/etc/rc.local
to run any local daemons you use.
/etc
files are documented in section 5 of the manual; so just invoking
# man 5 filename
Upgrading a previously-installed NetBSD System
/)
and
/usr
partitions, you should have enough space.
/etc
are backed up and merged with the new files. Getting the binary
sets is done in the same manner as the installation procedure;
refer to the installation part of the document
for how to do this. Also, some sanity checks are done, i.e.
file systems are checked before unpacking the sets.
/dev.
If you've changed the contents of
/dev
by hand, you will need to be careful about this, but if
not, you can just cd into
/dev,
and run the command
# sh MAKEDEV all
/etc/fstab
have changed, and some of the file
systems have changed names. To find out what the new options
are, it's suggested that you read the manual page
for the file system's mount commands, for example
mount_nfs(8)
for NFS.
Compatibility Issues With Previous NetBSD Releases
General issues
/etc/rc
modified to use
/etc/rc.d/*
/etc/rc
was a traditional
BSD
style monolithic file.
As of
NetBSD1.5,
each discrete program or substem from
/etc/rc
and
/etc/netstart
has been moved into separate scripts in
/etc/rc.d/.
/etc/rc
uses
rcorder(8)
to build a dependency list of the files in
/etc/rc.d
and then executes each script in turn with an argument of
`start'.
Many
rc.d
scripts won't start unless the appropriate
rc.conf(5)
entry in
/etc/rc.conf
is set to
`YES.'
/etc/rc.shutdown
uses
rcorder(8)
to build a dependency list of the files in
/etc/rc.d
that have a
``KEYWORD: shutdown''
line, reverses the resulting list, and then executes each script in turn
with an argument of
`stop'.
The following scripts support a specific shutdown method:
cron,
inetd,
local,
and
xdm.
/etc/rc.d
as necessary.
Refer to the other scripts in that directory and
rc(8)
for more information on implementing
rc.d
scripts.
Issues affecting an upgrading from NetBSD 1.4 or later
named(8)
leaks version information
named(8)
where the version number of the server could be determined by remote clients.
This feature has not been disabled in
NetBSD1.5,
because there is a
named.conf(5)
option to change the version string:
option {
version "newstring";
};
sysctl(8)
pathname changed
sysctl(8)
is moved from
/usr/sbin/sysctl
to
/sbin/sysctl.
If you have hardcoded references to the full pathname
(in shell scripts, for example)
please be sure to update those.
sendmail(8)
configuration file pathname changed
sendmail(8)
upgrade from 8.9.x to 8.10.x,
/etc/sendmail.cf
is moved to
/etc/mail/sendmail.cf.
Also, the default
sendmail.cf(5)
refers different pathnames than before.
For example,
/etc/aliases
is now located at
/etc/mail/aliases,
/etc/sendmail.cw
is now called
/etc/mail/local-host-names,
and so forth.
If you have customized
sendmail.cf(5)
and friends, you will need to move the files to the new locations.
See
/usr/share/sendmail/README
for more information.
Using online NetBSD documentation
name(section)'.
Some examples of this are
intro(1),
man(1),
apropros(1),
passwd(1),
and
passwd(5).
# man passwd
passwd(1).
To view the documentation for
passwd(5),
enter
# man 5 passwd
Administrivia
send-pr(1)
command shipped with
NetBSD,
and fill in as much information about the problem as you can. Good
bug reports include lots of details. Additionally, bug reports can
be sent by mail to:
netbsd-bugs@netbsd.org.
send-pr(1)
is encouraged, however, because bugs reported with it
are entered into the
NetBSD
bugs database, and thus can't slip through
the cracks.
Thanks go to
Keith Bostic
Ralph Campbell
Mike Karels
Marshall Kirk McKusick
Mike Hibler
Rick Macklem
Jan-Simon Pendry
Chris Torek
Steve Allen
Jason Birnschein
Mason Loring Bliss
Jason Brazile
Mark Brinicombe
David Brownlee
Simon Burge
Dave Burgess
Ralph Campbell
Brian Carlstrom
James Chacon
Bill Coldwell
Charles Conn
Tom Coulter
Charles D. Cranor
Christopher G. Demetriou
Scott Ellis
Hubert Feyrer
Castor Fu
Greg Gingerich
William Gnadt
Michael Graff
Guenther Grau
Ross Harvey
Charles M. Hannum
Michael L. Hitch
Kenneth Alan Hornstein
Jordan K. Hubbard
Søren Jørvang
Scott Kaplan
Noah M. Keiserman
Harald Koerfgen
John Kohl
Chris Legrow
Ted Lemon
Norman R. McBride
Neil J. McRae
Perry E. Metzger
Toru Nishimura
Herb Peyerl
Mike Price
Dave Rand
Michael Richardson
Heiko W. Rupp
Brad Salai
Chuck Silvers
Thor Lancelot Simon
Bill Sommerfeld
Paul Southworth
Eric and Rosemary Spahr
Ted Spradley
Kimmo Suominen
Jason R. Thorpe
Steve Wadlow
Krister Walfridsson
Jim Wise
Christos Zoulas
(If you're not on that list and should be, tell us! We probably were
not able to get in touch with you, to verify that you wanted to be
listed.)
AboveNet Communications, Inc.
Advanced System Products, Inc.
Avalon Computer Systems
Bay Area Internet Solutions
Brains Corporation, Japan
Canada Connect Corporation
Co-operative Research Centre for Enterprise Distributed Systems Technology
Demon Internet, UK
Digital Equipment Corporation
Distributed Processing Technology
Easynet, UK
Free Hardware Foundation
Innovation Development Enterprises of America
Internet Software Consortium
MS Macro System GmbH, Germany
Numerical Aerospace Simulation Facility, NASA Ames Research Center
Piermont Information Systems Inc.
Salient Systems Inc.
VMC Harald Frank, Germany
Warped Communications, Inc.
Whitecross Database Systems Ltd.
We are...
| The NetBSD core group: | ||||||||
| Alistair Crooks | agc@netbsd.org | |||||||
| Jun-ichiro itojun Hagino | itojun@netbsd.org | |||||||
| Frank van der Linden | fvdl@netbsd.org | |||||||
| Luke Mewburn | lukem@netbsd.org | |||||||
| Christos Zoulas | christos@netbsd.org | |||||||
|
| ||||||||
| The portmasters (and their ports): | ||||||||
| Mark Brinicombe | mark@netbsd.org | arm32 | ||||||
| Jeremy Cooper | jeremy@netbsd.org | sun3x | ||||||
| Ross Harvey | ross@netbsd.org | alpha | ||||||
| Jun-ichiro itojun Hagino | itojun@netbsd.org | sh3 | ||||||
| Ben Harris | bjh21@netbsd.org | arm26 | ||||||
| Eduardo Horvath | eeh@netbsd.org | sparc64 | ||||||
| Darrin Jewell | dbj@netbsd.org | next68k | ||||||
| Søren Jørvang | soren@netbsd.org | cobalt | ||||||
| Søren Jørvang | soren@netbsd.org | sgimips | ||||||
| Wayne Knowles | wdk@netbsd.org | mipsco | ||||||
| Paul Kranenburg | pk@netbsd.org | sparc | ||||||
| Anders Magnusson | ragge@netbsd.org | vax | ||||||
| Minoura Makoto | minoura@netbsd.org | x68k | ||||||
| Phil Nelson | phil@netbsd.org | pc532 | ||||||
| Tohru Nishimura | nisimura@netbsd.org | luna68k | ||||||
| NONAKA Kimihiro | nonaka@netbsd.org | prep | ||||||
| Scott Reynolds | scottr@netbsd.org | mac68k | ||||||
| Kazuki Sakamoto | sakamoto@netbsd.org | bebox | ||||||
| Noriyuki Soda | soda@netbsd.org | arc | ||||||
| Wolfgang Solfrank | ws@netbsd.org | ofppc | ||||||
| Ignatios Souvatzis | is@netbsd.org | amiga | ||||||
| Jonathan Stone | jonathan@netbsd.org | pmax | ||||||
| Shin Takemura | takemura@netbsd.org | hpcmips | ||||||
| Jason Thorpe | thorpej@netbsd.org | alpha | ||||||
| Jason Thorpe | thorpej@netbsd.org | hp300 | ||||||
| Tsubai Masanari | tsubai@netbsd.org | macppc | ||||||
| Tsubai Masanari | tsubai@netbsd.org | newsmips | ||||||
| Izumi Tsutsui | tsutsui@netbsd.org | news68k | ||||||
| Frank van der Linden | fvdl@netbsd.org | i386 | ||||||
| Leo Weppelman | leo@netbsd.org | atari | ||||||
| Nathan Williams | nathanw@netbsd.org | sun3 | ||||||
| Steve Woodford | scw@netbsd.org | mvme68k | ||||||
|
| ||||||||
| The NetBSD 1.5 Release Engineering team: | ||||||||
| Chris G. Demetriou | cgd@netbsd.org | |||||||
| Havard Eidnes | he@netbsd.org | |||||||
| Ted Lemon | mellon@netbsd.org | |||||||
| John Hawkinson | jhawk@netbsd.org | |||||||
| Perry Metzger | perry@netbsd.org | |||||||
| Curt Sampson | cjs@netbsd.org | |||||||
| Jason Thorpe | thorpej@netbsd.org | |||||||
| Todd Vierling | tv@netbsd.org | |||||||
|
| ||||||||
| Developers and other contributors: | ||||||||
| Steve Allen | wormey@netbsd.org | |||||||
| Julian Assange | proff@netbsd.org | |||||||
| Lennart Augustsson | augustss@netbsd.org | |||||||
| Christoph Badura | bad@netbsd.org | |||||||
| Robert V. Baron | rvb@netbsd.org | |||||||
| Erik Berls | cyber@netbsd.org | |||||||
| John Birrell | jb@netbsd.org | |||||||
| Mason Loring Bliss | mason@netbsd.org | |||||||
| Manuel Bouyer | bouyer@netbsd.org | |||||||
| John Brezak | brezak@netbsd.org | |||||||
| Allen Briggs | briggs@netbsd.org | |||||||
| Aaron Brown | abrown@netbsd.org | |||||||
| David Brownlee | abs@netbsd.org | |||||||
| Frederick Bruckman | fredb@netbsd.org | |||||||
| Jon Buller | jonb@netbsd.org | |||||||
| Simon Burge | simonb@netbsd.org | |||||||
| Dave Burgess | burgess@cynjut.infonet.net | |||||||
| Robert Byrnes | byrnes@netbsd.org | |||||||
| D'Arcy J.M. Cain | darcy@netbsd.org | |||||||
| Dave Carrel | carrel@netbsd.org | |||||||
| James Chacon | jmc@netbsd.org | |||||||
| Bill Coldwell | billc@netbsd.org | |||||||
| Julian Coleman | jdc@netbsd.org | |||||||
| Chuck Cranor | chuck@netbsd.org | |||||||
| Aidan Cully | aidan@netbsd.org | |||||||
| Johan Danielsson | joda@netbsd.org | |||||||
| Matt DeBergalis | deberg@netbsd.org | |||||||
| Rob Deker | deker@netbsd.org | |||||||
| Chris G. Demetriou | cgd@netbsd.org | |||||||
| Jaromir Dolecek | jdolecek@netbsd.org | |||||||
| Andy Doran | ad@netbsd.org | |||||||
| Roland Dowdeswell | elric@netbsd.org | |||||||
| Matthias Drochner | drochner@netbsd.org | |||||||
| Jun Ebihara | jun@netbsd.org | |||||||
| Havard Eidnes | he@netbsd.org | |||||||
| Enami Tsugutomo | enami@netbsd.org | |||||||
| Bernd Ernesti | veego@netbsd.org | |||||||
| Erik Fair | fair@netbsd.org | |||||||
| Hubert Feyrer | hubertf@netbsd.org | |||||||
| Thorsten Frueauf | frueauf@netbsd.org | |||||||
| Castor Fu | castor@netbsd.org | |||||||
| Ichiro Fukuhara | ichiro@netbsd.org | |||||||
| Brian R. Gaeke | brg@dgate.org | |||||||
| Thomas Gerner | thomas@netbsd.org | |||||||
| Simon J. Gerraty | sjg@netbsd.org | |||||||
| Justin Gibbs | gibbs@netbsd.org | |||||||
| Adam Glass | glass@netbsd.org | |||||||
| Michael Graff | explorer@netbsd.org | |||||||
| Brad Grantham | grantham@tenon.com | |||||||
| Brian C. Grayson | bgrayson@netbsd.org | |||||||
| Matthew Green | mrg@netbsd.org | |||||||
| Juergen Hannken-Illjes | hannken@netbsd.org | |||||||
| Charles M. Hannum | mycroft@netbsd.org | |||||||
| Eric Haszlakiewicz | erh@netbsd.org | |||||||
| John Hawkinson | jhawk@netbsd.org | |||||||
| HAYAKAWA Koichi | haya@netbsd.org | |||||||
| René Hexel | rh@netbsd.org | |||||||
| Michael L. Hitch | mhitch@netbsd.org | |||||||
| Christian E. Hopps | chopps@netbsd.org | |||||||
| Ken Hornstein | kenh@netbsd.org | |||||||
| Marc Horowitz | marc@netbsd.org | |||||||
| Nick Hudson | skrll@netbsd.org | |||||||
| Martin Husemann | martin@netbsd.org | |||||||
| Dean Huxley | dean@netbsd.org | |||||||
| Bernardo Innocenti | bernie@netbsd.org | |||||||
| ITOH Yasufumi | itohy@netbsd.org | |||||||
| IWAMOTO Toshihiro | toshii@netbsd.org | |||||||
| Matthew Jacob | mjacob@netbsd.org | |||||||
| Lonhyn T. Jasinskyj | lonhyn@netbsd.org | |||||||
| Chris Jones | cjones@netbsd.org | |||||||
| Takahiro Kambe | taca@netbsd.org | |||||||
| Antti Kantee | pooka@netbsd.org | |||||||
| Lawrence Kesteloot | kesteloo@cs.unc.edu | |||||||
| Thomas Klausner | wiz@netbsd.org | |||||||
| Klaus Klein | kleink@netbsd.org | |||||||
| Wayne Knowles | wdk@netbsd.org | |||||||
| John Kohl | jtk@netbsd.org | |||||||
| Kevin Lahey | kml@netbsd.org | |||||||
| Johnny C. Lam | jlam@netbsd.org | |||||||
| Martin J. Laubach | mjl@netbsd.org | |||||||
| Ted Lemon | mellon@netbsd.org | |||||||
| Joel Lindholm | joel@netbsd.org | |||||||
| Mike Long | mikel@netbsd.org | |||||||
| Warner Losh | imp@netbsd.org | |||||||
| Federico Lupi | federico@netbsd.org | |||||||
| Brett Lymn | blymn@netbsd.org | |||||||
| Paul Mackerras | paulus@netbsd.org | |||||||
| David Maxwell | david@netbsd.org | |||||||
| Dan McMahill | dmcmahill@netbsd.org | |||||||
| Gregory McGarry | gmcgarry@netbsd.org | |||||||
| Neil J. McRae | neil@netbsd.org | |||||||
| Perry Metzger | perry@netbsd.org | |||||||
| der Mouse | mouse@netbsd.org | |||||||
| Joseph Myers | jsm@netbsd.org | |||||||
| Ken Nakata | kenn@netbsd.org | |||||||
| Bob Nestor | rnestor@netbsd.org | |||||||
| NONAKA Kimihiro | nonaka@netbsd.org | |||||||
| Masaru Oki | oki@netbsd.org | |||||||
| Atsushi Onoe | onoe@netbsd.org | |||||||
| Greg Oster | oster@netbsd.org | |||||||
| Herb Peyerl | hpeyerl@netbsd.org | |||||||
| Matthias Pfaller | matthias@netbsd.org | |||||||
| Dante Profeta | dante@netbsd.org | |||||||
| Chris Provenzano | proven@netbsd.org | |||||||
| Waldi Ravens | waldi@moacs.indiv.nl.net | |||||||
| Darren Reed | darrenr@netbsd.org | |||||||
| Michael Richardson | mcr@netbsd.org | |||||||
| Tim Rightnour | garbled@netbsd.org | |||||||
| Gordon Ross | gwr@netbsd.org | |||||||
| Heiko W. Rupp | hwr@netbsd.org | |||||||
| SAITOH Masanobu | msaitoh@netbsd.org | |||||||
| Curt Sampson | cjs@netbsd.org | |||||||
| Wilfredo Sanchez | wsanchez@netbsd.org | |||||||
| Ty Sarna | tsarna@netbsd.org | |||||||
| SATO Kazumi | sato@netbsd.org | |||||||
| Matthias Scheler | tron@netbsd.org | |||||||
| Karl Schilke (rAT) | rat@netbsd.org | |||||||
| Konrad Schroder | perseant@netbsd.org | |||||||
| Reed Shadgett | dent@netbsd.org | |||||||
| Tim Shepard | shep@netbsd.org | |||||||
| Takao Shinohara | shin@netbsd.org | |||||||
| Takuya SHIOZAKI | tshiozak@netbsd.org | |||||||
| Chuck Silvers | chs@netbsd.org | |||||||
| Thor Lancelot Simon | tls@netbsd.org | |||||||
| Jeff Smith | jeffs@netbsd.org | |||||||
| Bill Sommerfeld | sommerfeld@netbsd.org | |||||||
| Bill Squier | groo@netbsd.org | |||||||
| Bill Studenmund | wrstuden@netbsd.org | |||||||
| Kevin Sullivan | sullivan@netbsd.org | |||||||
| SUNAGAWA Keiki | kei@netbsd.org | |||||||
| Kimmo Suominen | kim@netbsd.org | |||||||
| Matt Thomas | matt@netbsd.org | |||||||
| Christoph Toshok | toshok@netbsd.org | |||||||
| UCHIYAMA Yasushi | uch@netbsd.org | |||||||
| Shuichiro URATA | ur@netbsd.org | |||||||
| Todd Vierling | tv@netbsd.org | |||||||
| Aymeric Vincent | aymeric@netbsd.org | |||||||
| Paul Vixie | vixie@netbsd.org | |||||||
| Krister Walfridsson | kristerw@netbsd.org | |||||||
| Lex Wennmacher | wennmach@netbsd.org | |||||||
| Assar Westerlund | assar@netbsd.org | |||||||
| Todd Whitesel | toddpw@netbsd.org | |||||||
| Rob Windsor | windsor@netbsd.org | |||||||
| Dan Winship | danw@netbsd.org | |||||||
| Jim Wise | jwise@netbsd.org | |||||||
| Michael Wolfson | mbw@netbsd.org | |||||||
| Colin Wood | ender@netbsd.org | |||||||
All product names mentioned herein are trademarks or registered trademarks of their respective owners.
The following notices are required to satisfy the license terms of the software that we have mentioned in this document:
This product includes software developed by the University of
California, Berkeley and its contributors.
This product includes software developed by The NetBSD Foundation, Inc.
This product includes software developed by the NetBSD Foundation, Inc.
and its contributors.
This product includes software developed by the Computer
Systems Engineering Group at Lawrence Berkeley Laboratory.
This product includes software developed by Adam Glass
and Charles Hannum.
This product includes software developed by Adam Glass
and Charles M. Hannum.
This product includes software developed by Adam Glass.
This product includes software developed by Alistair G. Crooks.
This product includes software developed by Amancio Hasty and
Roger Hardiman.
This product includes software developed by Berkeley Software
Design, Inc.
This product includes software developed by Bill Paul.
This product includes software developed by Charles D. Cranor
and Washington University.
This product includes software developed by Charles D. Cranor.
This product includes software developed by Charles Hannum,
by the University of Vermont and State Agricultural College
and Garrett A. Wollman, by William F. Jolitz, and by the
University of California, Berkeley, Lawrence Berkeley Laboratory,
and its contributors.
This product includes software developed by Charles Hannum.
This product includes software developed by Charles M. Hannum.
This product includes software developed by Chris Provenzano.
This product includes software developed by Christian E. Hopps.
This product includes software developed by Christopher G. Demetriou
for the NetBSD Project.
This product includes software developed by Christopher G. Demetriou.
This product includes software developed by Christos Zoulas.
This product includes software developed by David Jones and Gordon Ross.
This product includes software developed by Dean Huxley.
This product includes software developed by Eric S. Hvozda.
This product includes software developed by Ezra Story.
This product includes software developed by Gardner Buchanan.
This product includes software developed by Gordon Ross.
This product includes software developed by Gordon W. Ross
and Leo Weppelman.
This product includes software developed by Gordon W. Ross.
This product includes software developed by Hauke Fath.
This product includes software developed by HAYAKAWA Koichi.
This product includes software developed by
Hellmuth Michaelis and Joerg Wunsch.
This product includes software developed by Herb Peyerl.
This product includes software developed by Holger Veit and Brian Moore
for use with "386BSD" and similar operating systems.
This product includes software developed by Hubert Feyrer for
the NetBSD Project.
This product includes software developed by Iain Hibbert.
This product includes software developed by Ian W. Dall.
This product includes software developed by Ignatios Souvatzis
for the NetBSD Project.
This product includes software developed by Jason R. Thorpe
for And Communications, http://www.and.com/.
This product includes software developed by Joachim Koenig-Baltes.
This product includes software developed by Jochen Pohl
for The NetBSD Project.
This product includes software developed by John Polstra.
This product includes software developed by Jonathan Stone
and Jason R. Thorpe for the NetBSD Project.
This product includes software developed by Jonathan Stone
for the NetBSD Project.
This product includes software developed by Jonathan Stone.
This product includes software developed by Julian Highfield.
This product includes software developed by Kenneth Stailey.
This product includes software developed by Leo Weppelman.
This product includes software developed by Lloyd Parkes.
This product includes software developed by Manuel Bouyer.
This product includes software developed by Marc Horowitz.
This product includes software developed by Mark Brinicombe.
This product includes software developed by Mark Tinguely and Jim Lowe.
This product includes software developed by Markus Wild.
This product includes software developed by Martin Husemann
and Wolfgang Solfrank.
This product includes software developed by Mats O Jansson
and Charles D. Cranor.
This product includes software developed by Mats O Jansson.
This product includes software developed by Matthias Pfaller.
This product includes software developed by Michael L. Hitch.
This product includes software developed by Niels Provos.
This product includes software developed by Paul Kranenburg.
This product includes software developed by Paul Mackerras.
This product includes software developed by Peter Galbavy.
This product includes software developed by Philip A. Nelson.
This product includes software developed by Rodney W. Grimes.
This product includes software developed by Roland C. Dowdeswell.
This product includes software developed by Rolf Grossmann.
This product includes software developed by Scott Bartram.
This product includes software developed by SigmaSoft, Th. Lockert.
This product includes software developed by Tatoku Ogaito
for the NetBSD Project.
This product includes software developed by Terrence R. Lambert.
This product includes software developed by Theo de Raadt
and John Brezak.
This product includes software developed by Theo de Raadt.
This product includes software developed by Tohru Nishimura
for the NetBSD Project.
This product includes software developed by TooLs GmbH.
This product includes software developed by Winning Strategies, Inc.
This product includes software developed by Zembu Labs, Inc.
This product includes software developed by the Center for
Software Science at the University of Utah.
This product includes software developed by the Computer
Systems Laboratory at the University of Utah.
This product includes software developed by the University of Calgary
Department of Computer Science and its contributors.
This product includes software developed by the University of Vermont
and State Agricultural College and Garrett A. Wollman.
This product includes software developed for the FreeBSD project.
This product includes software developed for the Internet
Software Consortium by Ted Lemon.
This product includes software developed for the NetBSD Project
by Frank van der Linden.
This product includes software developed for the NetBSD Project
by Jason R. Thorpe.
This product includes software developed for the NetBSD Project
by John M. Vinopal.
This product includes software developed for the NetBSD Project
by Matthias Drochner.
This product includes software developed for the NetBSD Project
by Matthieu Herrb.
This product includes software developed for the NetBSD Project
by Perry E. Metzger.
This product includes software developed for the NetBSD Project
by Piermont Information Systems Inc.
This product includes software developed for the NetBSD Project
by Ted Lemon.
This product includes software developed by LAN Media Corporation
and its contributors.
This product includes software developed by Michael Graff for
the NetBSD Project.
This product includes software developed by Niklas Hallqvist,
C Stone and Job de Haas.
This product includes software developed by Eric Young (eay@mincom.oz.au).
This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit (http://www.openssl.org/).
This product includes software developed by the University of Oregon.
This product includes software developed by the University of Southern
California and/or Information Sciences Institute.
This product includes software developed by Internet Initiative Japan Inc.
This product includes software developed by Ted Lemon.
This product includes software contributed to Berkeley by
Ralph Campbell.
This product includes software contributed to Berkeley by
Ralph Campbell and Rick Macklem.
This product includes software contributed to Berkeley by
Van Jacobson of Lawrence Berkeley Laboratory and Ralph
Campbell.
This product includes software developed by Chris G.
Demetriou, and Jonathan Stone.
This product includes software developed by Keith Bostic,
Chris G. Demetriou, and Jonathan Stone.
This product includes software developed by the University
of California, Lawrence Berkeley Laboratory.
This product includes software developed by Jonathan Stone for
the NetBSD Project.
This product includes software developed by Tohru Nishimura
for the NetBSD Project.
Some files have the following copyright:
Permission to use, copy, modify and distribute this software and its
documentation is hereby granted, provided that both the copyright
notice and this permission notice appear in all copies of the
software, derivative works or modified versions, and any portions
thereof, and that both notices appear in supporting documentation.
CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS
CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
Carnegie Mellon requests users of this software to return to
Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
any improvements or extensions that they make and grant Carnegie the
rights to redistribute these changes.
Some files have the following copyright:
Author: Chris G. Demetriou
Permission to use, copy, modify and distribute this software and
its documentation is hereby granted, provided that both the copyright
notice and this permission notice appear in all copies of the
software, derivative works or modified versions, and any portions
thereof, and that both notices appear in supporting documentation.
CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
Carnegie Mellon requests users of this software to return to
Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
any improvements or extensions that they make and grant Carnegie the
rights to redistribute these changes.
Some files have the following copyright:
Some files have the following copyright:
Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts,
and the Massachusetts Institute of Technology, Cambridge, Massachusetts.
All Rights Reserved
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the names of Digital or MIT not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
SOFTWARE.
Some files have the following copyright:
Copyright 1996 The Board of Trustees of The Leland Stanford
Junior University. All Rights Reserved.
Permission to use, copy, modify, and distribute this
software and its documentation for any purpose and without
fee is hereby granted, provided that the above copyright
notice appear in all copies. Stanford University
makes no representations about the suitability of this
software for any purpose. It is provided "as is"
without express or implied warranty.
Copyright (c) 1991,1990,1989 Carnegie Mellon University
All Rights Reserved.
School of Computer Science
Carnegie Mellon University
Pittsburgh PA 15213-3890
All rights reserved.
School of Computer Science
Carnegie Mellon University
Pittsburgh PA 15213-3890
Permission to use, copy, modify, and distribute this software and
its documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appears in all copies.
Digital Equipment Corporation makes no representations about the
suitability of this software for any purpose. It is provided "as is"
without express or implied warranty.