INSTALL(8) NetBSD System Manager's Manual INSTALL(8) NAME INSTALL - Installation procedure for NetBSD/sparc. DESCRIPTION About this Document This document describes the installation procedure for NetBSD 1.5 on the sparc platform. It is available in four different formats titled INSTALL.ext, where ext is one of .ps, .html, .more, or .txt: .ps PostScript. .html Standard Internet HTML. .more The enhanced text format used on UNIX-like systems by the more(1) and less(1) pager utility programs. This is the format in which the on-line man pages are generally pre- sented. .txt Plain old ASCII. You are reading the ASCII version. What is NetBSD? The NetBSD Operating System is a fully functional Open Source UNIX-like operating system derived from the University of California, Berkeley Net- working Release 2 (Net/2), 4.4BSD-Lite, and 4.4BSD-Lite2 sources. NetBSD runs on thirty-one different system architectures featuring twelve dis- tinct families of CPUs, and is being ported to more. The NetBSD 1.5 re- lease contains complete binary releases for fifteen different machine types. (The sixteen remaining are not fully supported at this time and are thus not part of the binary distribution. For information on them, please see the NetBSD web site at http://www.netbsd.org/) NetBSD is a completely integrated system. In addition to its highly portable, high performance kernel, NetBSD features a complete set of user utilities, compilers for several languages, the X Window System, firewall software and numerous other tools, all accompanied by full source code. NetBSD is a creation of the members of the Internet community. Without the unique cooperation and coordination the net makes possible, it's likely that NetBSD wouldn't exist. Changes Since The Last Release The NetBSD 1.5 release provides numerous significant functional enhance- ments, including support for many new devices, integration of hundreds of bug fixes, new and updated kernel subsystems, and many userland enhance- ments. The result of these improvements is a stable operating system fit for production use that rivals most commercially available systems. It is impossible to completely summarize over one year of development that went into the NetBSD 1.5 release. Some highlights include: Kernel o Ports to new platforms including: arc, cobalt, hpcmips, news68k, sgimips, and sparc64. o Improved performance and stability of the UVM virtual memory subsys- tem. o Implementation of generic kernel locking code, as well as a restruc- ture and re-tuning of the scheduler, to be used by the future symmet- ric multi-processing (SMP) implementation. o Improved compatibility support for Linux, OSF1, and SVR4 programs. o New compatibility support for Win32 programs. o Support for dynamically loaded ELF kernel modules. o Kernel process tracing using ktruss(1). o Deletion of swap devices using swapctl(8). o Easier hot-pluggability of keyboards and mice using a new wscons de- vice - wsmux. o Improved PCMCIA and Cardbus support, including support for detaching of devices and cards, resulting in better support for notebooks and PDA devices. o Numerous hardware improvements, including areas such as: audio, UD- MA/66 support for ATA drives, USB, and wireless networking. Networking o Addition of IP version 6 (IPv6) and IPsec to the networking stack, from the KAME project. This includes addition of kernel code for IPv6/IPsec, IPv4/v6 dual-stack user applications and supporting li- braries. Due to this, the shlib major version for pcap(3) is incre- mented and you may need to recompile userland tools. The KAME IPv6 part includes results from the unified-ipv6 effort. File system o Significant Fast file system (FFS) performance enhancements via inte- gration of Kirk McKusick's soft updates and trickle sync code. o Support for the Windows NT `NTFS' file system (read-only at this stage). o Support for revision 1 of the Linux `ext2fs' file system. o Enhanced stability and usability of LFS (the BSD log-structured file system). o Various RAIDframe enhancements including: auto-detection of RAID com- ponents and auto-configuration of RAID sets, and the ability to con- figure the root file system (/) on a RAID set. o Support for Microsoft Joliet extensions to the ISO9660 CD file sys- tem. o Improved file system vnode locking mechanisms, thus resolving a source of several panics in the past. o Support for NFS and RPC over IPv6. o Server part of NFS locking (implemented by rpc.lockd(8)) now works. Security o Strong cryptographic libraries and applications integrated, including the AES cipher Rijndael, the OpenSSL library, more complete Kerberos IV and Kerberos V support, and an SSH server and client. o sysctl(3) interfaces to various elements of process and system infor- mation, allowing programs such as ps(1), dmesg(1) and the like to op- erate without recompilation after kernel upgrades, and remove the ne- cessity to run setgid kmem (thus improving system security). o Disable various services by default, and set the default options for disabled daemons to a higher level of logging. o Several code audits were performed. One audit replaced string rou- tines that were used without bound checking, and another one to iden- tify and disable places where format strings were used in an unsafe way, allowing arbitrary data entered by (possibly) malicious users to overwrite application code, and leading from Denial of Service at- tacks to compromised system. System administration and user tools o Conversion of the rc(8) system startup and shutdown scripts to an `rc.d' mechanism, with separate control scripts for each service, and appropriate dependency ordering provided by rcorder(8). o postfix(1) provided as alternative mail transport agent to sendmail(8). o User management tools useradd(8), usermod(8), userdel(8), groupadd(8), groupmod(8), and groupdel(8) added to the system. o Incorporation of a login class capability database (/etc/login.conf) from BSD/OS. o Improved support for usernames longer than eight characters in pro- grams such as at(1) and w(1). o Many enhancements to ftpd(8) providing features found in larger and less secure FTP daemons, such as user classes, connection limits, im- proved support for virtual hosting, transfer statistics, transfer rate throttling, and support for various IETF ftpext working group extensions. o The ftp(1) client has been improved even further, including transfer rate throttling, improved URL support, command line uploads. See the man page for details. Miscellaneous o Updates to the NetBSD source code style code (located in /usr/share/misc/style) to use ANSI C only (instead of K&R) and re- flect current (best) practice, and begin migrating the NetBSD source code to follow it. o Implementation of many SUSv2 features to the curses(3) library, in- cluding support for color. o Updates of most third party packages that are shipped in the base system, including file(1), ipfilter(4), ppp(4), and sendmail(8) to the latest stable release. o Many new packages in the pkgsrc system, including standard desktops like KDE and GNOME as well as latest Tcl/Tk and perl and many of the components of the Java Enterprise platform. The package framework itself now has full wildcard dependency support. As has been noted, there have also been innumerable bug fixes. Kernel interfaces have continued to be refined, and more subsystems and device drivers are shared among the different ports. You can look for this trend to continue. NetBSD 1.5 is the sixth release for the sparc. Some (but not all!) notable sparc-specific improvements include: o Migration to the ELF binary format from a.out. o Support for the JavaStation 1. o HyperSPARCs now run reliably. o Tadpole console and mouse now work. o Support for the sun4/400 class of machines. NetBSD 1.5 on sparc is, as usual, also fully backward compatible with old NetBSD/sparc binaries, so you don't need to recompile all your local pro- grams provided you set the appropriate binary compatibility options in your kernel configuration. The Future of NetBSD The NetBSD Foundation has been incorporated as a non-profit organization. Its purpose is to encourage, foster and promote the free exchange of com- puter software, namely the NetBSD Operating System. The foundation will allow for many things to be handled more smoothly than could be done with our previous informal organization. In particular, it provides the framework to deal with other parties that wish to become involved in the NetBSD Project. The NetBSD Foundation will help improve the quality of NetBSD by: o providing better organization to keep track of development efforts, including co-ordination with groups working in related fields. o providing a framework to receive donations of goods and services and to own the resources necessary to run the NetBSD Project. o providing a better position from which to undertake promotional ac- tivities. o periodically organizing workshops for developers and other interested people to discuss ongoing work. We intend to begin narrowing the time delay between releases. Our ambi- tion is to provide a full release every six to eight months. We hope to support even more hardware in the future, and we have a rather large number of other ideas about what can be done to improve NetBSD. We intend to continue our current practice of making the NetBSD-current development source available on a daily basis. We intend to integrate free, positive changes from whatever sources sub- mit them, providing that they are well thought-out and increase the us- ability of the system. Above all, we hope to create a stable and accessible system, and to be responsive to the needs and desires of NetBSD users, because it is for and because of them that NetBSD exists. Sources of NetBSD Refer to http://www.netbsd.org/Sites/net.html. NetBSD 1.5 Release Contents The root directory of the NetBSD 1.5 release is organized as follows: .../NetBSD-1.5/ CHANGES Changes since earlier NetBSD releases. LAST_MINUTE Last minute changes. MIRRORS A list of sites that mirror the NetBSD 1.5 distribution. README.files README describing the distribution's contents. TODO NetBSD 's todo list (also somewhat incomplete and out of date). patches/ Post-release source code patches. source/ Source distribution sets; see below. In addition to the files and directories listed above, there is one di- rectory per architecture, for each of the architectures for which NetBSD 1.5 has a binary distribution. There are also README.export- control files sprinkled liberally throughout the distribution tree, which point out that there are some portions of the distribution that may be subject to export regulations of the United States, e.g. code under src/crypto and src/sys/crypto. It is your responsibility to determine whether or not it is legal for you to export these portions and to act accordingly. The source distribution sets can be found in subdirectories of the source subdirectory of the distribution tree. They contain the complete sources to the system. The source distribution sets are as follows: gnusrc This set contains the ``gnu'' sources, including the source for the compiler, assembler, groff, and the other GNU utilities in the binary distribution sets. 22.3 MB gzipped, 98.8 MB uncompressed pkgsrc This set contains the ``pkgsrc'' sources, which contain the in- frastructure to build third-party packages. 5.6 MB gzipped, 57.0 MB uncompressed sharesrc This set contains the ``share'' sources, which include the sources for the man pages not associated with any particular program, the sources for the typesettable document set, the dictionaries, and more. 3.3 MB gzipped, 13.2 MB uncompressed src This set contains all of the base NetBSD 1.5 sources which are not in gnusrc, sharesrc, or syssrc. 24.2 MB gzipped, 120.6 MB uncompressed syssrc This set contains the sources to the NetBSD 1.5 kernel for all architectures, config(8), and dbsym(8). 17.6 MB gzipped, 88.6 MB uncompressed xsrc This set contains the sources to the X Window System. 35.2 MB gzipped, 176.8 MB uncompressed All the above source sets are located in the source/sets subdirectory of the distribution tree. The source sets are distributed as compressed tar files. They may be un- packed into /usr/src with the command: # ( cd / ; tar -zxpf - ) < set_name.tgz The sets/Split/ subdirectory contains split versions of the source sets for those users who need to load the source sets from floppy or otherwise need a split distribution. The split sets are named set_name.xx where set_name is the distribution set name, and xx is the sequence number of the file, starting with ``aa'' for the first file in the distribution set, then ``ab'' for the next, and so on. All of these files except the last one of each set should be exactly 240,640 bytes long. (The last file is just long enough to contain the remainder of the data for that distri- bution set.) The split distributions may be reassembled and extracted with cat as fol- lows: # cat set_name.?? | ( cd / ; tar -zxpf - ) In each of the source distribution set directories, there are files which contain the checksums of the files in the directory: BSDSUM Historic BSD checksums for the various files in that di- rectory, in the format produced by the command: cksum -o 1 file CKSUM POSIX checksums for the various files in that directory, in the format produced by the command: cksum file. MD5 MD5 digests for the various files in that directory, in the format produced by the command: cksum -m file. SYSVSUM Historic AT&T System V UNIX checksums for the various files in that directory, in the format produced by the command: cksum -o -2 file. The MD5 digest is the safest checksum, followed by the POSIX checksum. The other two checksums are provided only to ensure that the widest pos- sible range of system can check the integrity of the release files. NetBSD/sparc subdirectory structure The sparc-specific portion of the NetBSD 1.5 release is found in the sparc subdirectory of the distribution: .../NetBSD-1.5/sparc/ INSTALL.html INSTALL.ps INSTALL.txt INSTALL.more Installation notes in various file formats, including this file. The .more file contains underlined text using the more(1) conventions for indicating italic and bold display. binary/ kernel/ netbsd.GENERIC.gz A gzipped NetBSD kernel containing code for everything supported in this release. sets/ sparc binary distribution sets; see below. installation/ floppy/ sparc boot and installation floppies; see be- low. miniroot/ sparc miniroot file system image; see below. misc/ Statically-linked versions of gzip (GNU gzip) and gtar (GNU tar). netboot/ Server boot-file image for diskless machines. Binary distribution sets The NetBSD sparc binary distribution sets contain the binaries which com- prise the NetBSD 1.5 release for the sparc. There are eight binary dis- tribution sets. The binary distribution sets can be found in the sparc/binary/sets subdirectory of the NetBSD 1.5 distribution tree, and are as follows: base The NetBSD 1.5 sparc base binary distribution. You must install this distribution set. It contains the base NetBSD utilities that are necessary for the system to run and be minimally func- tional. It includes shared library support, and excludes every- thing described below. 17.5 MB gzipped, 43.7 MB uncompressed comp Things needed for compiling programs. This set includes the system include files (/usr/include) and the various system li- braries (except the shared libraries, which are included as part of the base set). This set also includes the manual pages for all of the utilities it contains, as well as the system call and library manual pages. 14.1 MB gzipped, 51.9 MB uncompressed etc This distribution set contains the system configuration files that reside in /etc and in several other places. This set must be installed if you are installing the system from scratch, but should not be used if you are upgrading. (If you are upgrading, it's recommended that you get a copy of this set and carefully upgrade your configuration files by hand.) 0.1 MB gzipped, 0.6 MB uncompressed games This set includes the games and their manual pages. 3.0 MB gzipped, 7.2 MB uncompressed kern This set contains a NetBSD/sparc 1.5 GENERIC kernel, named /netbsd. You must install this distribution set. 1.2 MB gzipped, 2.8 MB uncompressed man This set includes all of the manual pages for the binaries and other software contained in the base set. Note that it does not include any of the manual pages that are included in the other sets. 5.0 MB gzipped, 19.9 MB uncompressed misc This set includes the (rather large) system dictionaries, the typesettable document set, and other files from /usr/share. 2.6 MB gzipped, 10.1 MB uncompressed text This set includes NetBSD 's text processing tools, including groff(1), all related programs, and their manual pages. 1.3 MB gzipped, 4.4 MB uncompressed NetBSD maintains its own set of sources for the X Window System in order to assure tight integration and compatibility. These sources are based on XFree86, and tightly track XFree86 releases. They are currently equivalent to XFree86 3.3.6. Binary sets for the X Window system are distributed with NetBSD. The sets are: xbase The basic files needed for a complete X client environment. This does not include the X servers. 2.8 MB gzipped, 8.2 MB uncompressed xcomp The extra libraries and include files needed to compile X source code. 1.8 MB gzipped, 8.3 MB uncompressed xcontrib Programs that were contributed to X. 0.2 MB gzipped, 0.6 MB uncompressed xfont Fonts needed by X. 6.2 MB gzipped, 7.5 MB uncompressed xserver The Xsun, Xsun24, XsunMono and Xprt servers with man pages. 3.3 MB gzipped, 8.5 MB uncompressed The sparc binary distribution sets are distributed as gzipped tar files named with the extension .tgz, e.g. base.tgz. The instructions given for extracting the source sets work equally well for the binary sets, but it is worth noting that if you use that method, the files are /-relative and therefore are extracted below the current directory. That is, if you want to extract the binaries into your system, i.e. replace the system binaries with them, you have to run the tar -xpf command from /. Note: The distribution cannot be extracted using the SunOS tar program so statically-linked SunOS versions of gzip (GNU gzip) and gtar (GNU tar) are provided in sparc/installation/misc. Note: Each directory in the sparc binary distribution also has its own checksum files, just as the source distribution does. NetBSD/sparc System Requirements and Supported Devices Supported machines o sun4 - 4/100 - 4/200 - 4/300 - 4/400 o sun4c - SPARCstation/server 1 - SPARCstation/server 1+ - SPARCstation/server 2 - IPC - ELC - IPX - SLC o sun4c clones - Aries Parrot II - Opus/5000 - Opus/5250 - FORCE Sparc CPU1e/4 - FORCE Sparc CPU2e/4 (and possibly more) Note: NetBSD doesn't support the VME interface on the FORCE models o sun4m - 4/600 - SPARC Classic - SPARC LX - SPARCstation 4 - SPARCstation/server 5 - SPARCstation/server 10 - SPARCstation/server 20 - Voyager - JavaStation 1 Note: All known MBus modules are supported o sun4m clones - Axil 245 - Axil 311 - Axil 320 - Cycle C C Cycle 5-IP - DTKstation/Classic+ - RDI PowerLite-85 - RDI PowerLite-110 - RDI BriteLite - Ross sparc 20 - Transtec SS5/170 - Tatung microCOMPstation 5 - TWS SuperCOMPstation-20S - Tadpole SPARCbook 3 series (and possibly more) Machines not supported by NetBSD/sparc o sun4d - SPARCcenter 1000 - SPARCcenter 2000 o sun4u and other UltraSPARC based machines These are supported by the NetBSD sparc64 port. Refer to http://www.netbsd.org/Ports/sparc64/index.html o Solbourne machines o Other JavaStation models The minimal configuration requires 4 MB of RAM and ~60 MB of disk space. To install the entire system requires much more disk space, and to run X or compile the system, more RAM is recommended, as NetBSD with 4 MB of RAM feels like Solaris with 4 MB of RAM - slow. Note that until you have around 16 MB of RAM, getting more RAM is more important than getting a faster CPU. Supported devices o sun4c and sun4m video; Sbus card, on-board, or optional - bwtwo; 1 bpp framebuffer. On-board and Sbus card (MG1 and MG2) - cgthree; 8 bpp framebuffer. On-board and Sbus card - cgsix; 8 bpp accelerated framebuffer. On-board and Sbus card (GX, GX+, TGX, and TGX+) - cgfourteen; SX 24 bpp accelerated framebuffer. On-board SPARCstation 10SX and SPARCstation 20, requires optional 4 or 8 MB VSIMM, limited to cgthree emulation - tcx; S24 accelerated color framebuffer. On-board SPARCsta- tion 4 (8 bpp) and optional on SPARCstation 5 (24 bpp), limited to cgthree emulation - pnozz; Weitek p9100 24 bpp accelerated framebuffer. On- board Tadpole SPARCbook 3GS and 3GX, limited to cgthree em- ulation o sun4 video; VME card, on-board, or P4 (supported only on 4/100 and 4/300 series machines) - bwtwo; 1 bpp framebuffer. On-board and P4 - cgtwo; 8 bpp framebuffer. VME card - cgfour; 8 bpp framebuffer with overlay. P4 - cgsix; LEGO 8 bpp accelerated framebuffer. P4 - cgeight; 24 bpp framebuffer with overlay. P4 (not well tested) o Network interfaces - be; 100 Mbps half-duplex ``Big Mac'' ethernet. Sbus card - en; Efficient Networks, Inc. ATM interface. Sbus card - hme; 100 Mbps full-duplex ``Happy Meal'' ethernet. Sbus card (not well tested) - ie; 10 Mbps Intel 82586 ethernet. On-board (4/100 and 4/200, may not be working properly on 4/400) and VME card - le; 10 Mbps AMD 9790 Lance ethernet. On-board (4/300, sun4c, and sun4m) and Sbus card - qec; One 100 Mbps be interface and four 10 Mbps Mace ether- net interfaces. Sbus card - qfe; quad 100 Mbps full-duplex ``Happy Meal'' ethernet (four ethernet interfaces). Sbus card (not well tested) - misc: various ethernet interfaces are found on multi-func- tion Sbus cards (e.g. along with SCSI), the ethernet inter- faces work even if the other functions do not o SCSI interfaces - esp; 5 MB/s and 10 MB/s (Fast) NCR 53C9x SCSI controller. On-board (sun4c, sun4m, and 4/300) and Sbus card - isp; 10 MB/s (Fast) and 20 MB/s (Fast+Wide) Qlogic ISP 10x0 family. Sbus card - si; 5 MB/s NCR 5380 SCSI controller. VME card (Interrupt driven and polled DMA) - sw; 5 MB/s NCR 5380 ``SCSI Weird'' controller. Onboard 4/110 (polled DMA only) - misc: SCSI functionality is sometimes found on multi-func- tion Sbus cards (e.g. along with ethernet), the SCSI esp and isp portions of those cards should work, even if the other functions do not. Note: See http://saturn.tlug.org/suncdfaq/ for information on bootable CD-ROMs o VME disk interfaces - xd; Xylogics 7053 VME/SMD disk controller - xy; Xylogics 450/451 VME disk controller Note: VME/IPI disks are not supported o Floppy drives - fd; floppy disk drive. On-board sun4c and sun4m - sd; SCSI floppy drive, acts as a SCSI drive to kernel. found with some SPARCBook 3 machines o Serial interfaces - On-board serial ports based on Zilog 8530 and Zilog 85C30 (can be used as console if needed) o Input devices - Sun keyboard and mouse - SPARCBook 3 keyboard and joystick - Third-party keyboards, mice, and trackballs o Audio - audioamd; AMD 7930-based 8000 Hz, 8 bit, mono, mu-law. On- board sun4c and SPARC Classic - audiocs; CS4231-based 44 KHz, 16 bit, stereo, PCM. On- board SPARCStation 5 and optional on SPARCStation 4 (does not support audio input) o Misc cards - mtty / mbpp; Magma Serial/Parallel ports. Sbus card - xbox; Sun Sbus expander device Unsupported devices o Use of more than one processor in sun4m machines (it boots, but only uses one processor) o DBRIe-based audio and ISDN. On-board some sun4m machines (such as SS10, SS20, SPARC LX, and Tadpole SPARCbook) o sc; Sun SCSI. VME card o bpp; Bi-directional parallel port. On-board and Sbus card o cgtwelve; I.e. GS, 24 bpp framebuffer. Sbus card o leo; I.e. ZX and TZX, 24 bpp accelerated framebuffer. Sbus card o nell; Sbus-to-PCMCIA bridge Getting the NetBSD System on to Useful Media Installation is supported from several media types, including: o CD-ROM o MS-DOS floppy o FTP o Remote NFS partition o Tape o Existing NetBSD partitions, if performing an upgrade The steps necessary to prepare the distribution sets for installation de- pend upon which installation medium you choose. The steps for the vari- ous media are outlined below. CD-ROM Find out where the distribution set files are on the CD- ROM. Proceed to the instruction on installation. MS-DOS floppy Count the number of set_name.xx files that make up the distribution sets you want to install or upgrade. You will need one sixth that number of 1.44 MB floppies. Format all of the floppies with MS-DOS. Do not make any of them bootable MS-DOS floppies, i.e. don't use format /s to format them. (If the floppies are bootable, then the MS-DOS system files that make them bootable will take up some space, and you won't be able to fit the distribution set parts on the disks.) If you're using floppies that are formatted for MS-DOS by their manufacturers, they probably aren't bootable, and you can use them out of the box. Place all of the set_name.xx files on the MS-DOS disks. Once you have the files on MS-DOS disks, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the sec- tion on preparing your hard disk, below. If you're up- grading an existing installation, go directly to the sec- tion on upgrading. FTP The preparations for this installation/upgrade method are easy; all you need to do is make sure that there's an FTP site from which you can retrieve the NetBSD distribution when you're about to install or upgrade. You need to know the numeric IP address of that site, and, if it's not on a network directly connected to the machine on which you're installing or upgrading NetBSD, you need to know the nu- meric IP address of the router closest to the NetBSD ma- chine. Finally, you need to know the numeric IP address of the NetBSD machine itself. If you don't have access to a functioning nameserver during installation, the IP ad- dress of ftp.netbsd.org is 204.152.184.75 (as of October, 2000). Once you have this information, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading. Note: This method of installation is recommended only for those already familiar with using BSD network con- figuration and management commands. If you aren't, this documentation should help, but is not intended to be all-encompassing. NFS Place the NetBSD distribution sets you wish to install in- to a directory on an NFS server, and make that directory mountable by the machine on which you are installing or upgrading NetBSD. This will probably require modifying the /etc/exports file on of the NFS server and resetting its mount daemon (mountd). (Both of these actions will probably require superuser privileges on the server.) You need to know the numeric IP address of the NFS server, and, if the server is not on a network directly connected to the machine on which you're installing or upgrading NetBSD, you need to know the numeric IP address of the router closest to the NetBSD machine. Finally, you need to know the numeric IP address of the NetBSD machine it- self. Once the NFS server is set up properly and you have the information mentioned above, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on up- grading. Note: This method of installation is recommended only for those already familiar with using BSD network con- figuration and management commands. If you aren't, this documentation should help, but is not intended to be all-encompassing. Tape To install NetBSD from a tape, you need to make a tape that contains the distribution set files, in `tar' format. If you're making the tape on a UNIX-like system, the easi- est way to do so is probably something like: # tar -cf tape_device dist_directories where tape_device is the name of the tape device that de- scribes the tape drive you're using; possibly /dev/rst0, or something similar, but it will vary from system to sys- tem. (If you can't figure it out, ask your system admin- istrator.) In the above example, dist_directories are the distribution sets' directories, for the distribution sets you wish to place on the tape. For instance, to put the misc, base, and etc distributions on tape (in order to do the absolute minimum installation to a new disk), you would do the following: # cd .../NetBSD-1.5 # cd sparc/binary # tar -cf tape_device misc etc kern Note: You still need to fill in tape_device in the example. Once you have the files on the tape, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading. Upgrade If you are upgrading NetBSD, you also have the option of installing NetBSD by putting the new distribution sets somewhere in your existing file system, and using them from there. To do that, you must do the following: Place the distribution sets you wish to upgrade somewhere in your current file system tree. Please note that the /dev on the floppy used for upgrades only knows about wd0, wd1, sd0, sd1, and sd2. If you have more than two IDE drives or more than three SCSI drives, you should take care not to place the sets on the high numbered drives. At a bare minimum, you must upgrade the base and kern bi- nary distributions, and so must put the base and kern sets somewhere in your file system. If you wish, you can do the other sets, as well, but you should not upgrade the etc distribution; it contains contains system configura- tion files that you should review and update by hand. Once you have done this, you can proceed to the next step in the upgrade process, actually upgrading your system. Preparing your System for NetBSD installation Configuring your PROM Before you start, you should configure your PROM. There are three cate- gories of PROM: ``sunmon'' (sometimes called Restricted Prompt, sun moni- tor, or old command mode), OpenBoot PROM 1, and OpenBoot PROM 2. The sun4 machines only have sunmon. Some of the early sun4c models default to sunmon but have OpenBoot PROM 1. The later sun4c models and all sun4m models have OpenBoot PROM 2. First, you need to stop your system from automatically booting when pow- ered on. Pressing the STOP key (sometimes called the L1 key, found on the left side of your keyboard) and the a key will halt your system and give you a PROM prompt. If you are using a Tadpole SPARCbook, you press the Pause and a keys. If you are using a serial console, send a ``BREAK'' signal from your terminal (the method of sending ``BREAK'' varies from terminal to terminal). Next, you should set your system to always use the OpenBoot PROM (some- times called ``new command mode'') if it defaults to sunmon. The NetBSD kernel relies on some of the functionality provided by the OpenBoot PROM. If your machine gives you a `>' prompt instead of an `ok' prompt, type: > n ok setenv sunmon-compat? false ok Next, if you are using any security features of OpenBoot PROM, you should turn them off - NetBSD can't deal well with this. ok setenv security-mode none The OpenBoot PROM 1 machines (SPARCstation/server 1, SPARCstation/server 1+, IPC, and SLC) have an odd SCSI quirk you should be aware of. There are three SCSI addressing schemes used by your system: SCSI target ID (set by physical jumpers on the device), PROM `unit' number (set by Open- Boot PROM 1, based on its SCSI target ID), and the name you reference within an operating system (set by the kernel, based on the PROM `unit' number). Sun shipped these systems with the internal drives set to SCSI target IDs 3 and 1. The default value of the OpenBoot PROM variable `sd-targets' is `31204567.' This variable maps how the OpenBoot PROM 1 assigns `unit' numbers based on the SCSI target ID. Thus the device at SCSI target ID 3 is considered `unit' 0, and the SCSI device at target ID 0 is `unit' 3. When you type ``boot scsi(0,0,0)'', the OpenBoot PROM will boot from `unit' 0 (which is SCSI target ID 3, the internal hard drive). The SunOS kernel is hard-wired to map sd0 to SCSI target 3, and sd3 to SCSI target 0. PROM Unit# SCSI Target SunOS name 0 3 sd0 1 1 sd1 2 2 sd2 3 0 sd3 4 4 st0 5 5 st1 6 6 cdrom The NetBSD/sparc GENERIC kernel does not wire things down as does SunOS. It names the disks in the order that the SCSI targets are probed (01234567). If you only have one disk, it is always sd0 regardless of its SCSI target ID or its PROM `unit' number, and there are no problems. If you have two disks, one at SCSI ID 2 ( `unit' 2) and SCSI ID 3 ( `unit' 0), then they are recognized as sd0 and sd1 respectively. This can be a problem if you are not aware of it, particularly when creating an fstab. There are two approaches to fixing this problem: changing the mapping that OpenBoot PROM 1 does, and changing the NetBSD kernel configuration. To get OpenBoot PROM 1 to number the SCSI `unit' numbers the same as the SCSI target IDs, you need to run this command: ok setenv sd-targets 01234567 This may, however, cause problems if you were to later attempt to use SunOS on this machine or if you reset the OpenBoot PROM variables. The other approach is to use a NetBSD kernel that matches the PROM's odd target mapping by treating `unit' 0 (i.e. SCSI target ID 3) as sd0 and `unit' 3 (i.e. SCSI target ID 0) as sd3. The GENERIC_SCSI3 kernel per- forms this target mapping, but the GENERIC and INSTALL kernels do not. Note: This is also a concern when you start building your own customised kernels. The machines with OpenBoot PROM 2 (SPARCstation/server 2, ELC, IPX, and all sun4m models) have s similar SCSI target mapping in the form of a devalias entry. That is, the device alias disk is shorthand for the disk at SCSI ID 3 on the internal SCSI controller. Normally, the disk device alias is what the PROM uses as the default boot device, i.e. in the ab- sence of a device argument to the boot command. Note that there are also pre-configured device alias entries for disk0, disk1, disk2 and disk3, which are in fact a one-to-one mapping to the SCSI targets 0 to 3 (all on the internal SCSI controller). Again, it may be advantageous to use a fixed ``SCSI target'' to ``NetBSD disk unit'' mapping in your kernel configuration file (such as is done in the GENERIC_SCSI3 kernel) to ensure that your disks remain showing up at the same NetBSD device unit numbers even if you add disks to your system at a later time. Determining how to access your SCSI disk from the PROM sunmon and OpenBoot PROM 1 use an archaic sd(c,u,p) syntax to address SC- SI devices. OpenBoot PROM 2 uses a more intuitive syntax using device aliases. To calculate the parameters for sunmon and OpenBoot PROM 1: c specifies the SCSI controller number (first is 0, second is 1, ...) u the hexadecimal number obtained from evaluating the expression (8 * TARGET) + LUN p the partition number from which to boot (`0' = `a', `1' = `b', etc.) Therefore, to boot from the swap partition on the internal hard drive (first SCSI bus, target 0, lun 0, partition 1), one would use: ok boot sd(0,0,1) To boot from a CD-ROM (first SCSI bus, target 6, lun 0, partition dynami- cally determined), one would use: ok boot sd(0,30,) And, to boot from a kernel named netbsd-GENERIC on the fourth partition ( `d', often the /usr partition) on an external hard drive (first SCSI bus, target 2, lun 0, partition 3), one would use: ok boot sd(0,10,3)netbsd-GENERIC Now, for OpenBoot PROM 2, SCSI devices are specified by an OpenBOOT devalias which provides simple mnemonics for the full path to the device. Type devalias in OpenBoot PROM 2 to get a list of all of the available aliases. Just the alias and partition are necessary when booting. Therefore, to boot from the swap partition on the internal hard drive (OpenBoot PROM 2 assumes the internal hard drive is at target 3), one would use: ok boot disk:b To boot from a CD-ROM (OpenBoot PROM 2 assumes the CD-ROM is at target 6), one would use: ok boot cdrom And, to boot from a kernel named netbsd-GENERIC on the fourth partition ( `d', often the /usr partition) on an external hard drive (target 2, par- tition 3), one would use: ok boot disk2:d netbsd-GENERIC The full device path specifier for OpenBoot PROM 2 depends on how Open- Boot PROM 2 recognizes your SCSI controller. Typically, one would use something like: /sbus/esp/sd@t,p where t is the SCSI target and p is the partition number. Deciding on partition sizes If you're installing NetBSD/sparc for the first time it's a good idea to look at the partition sizes of disk you intend installing NetBSD on. Asumming a classic partition scheme with / (root) and /usr filesystems, a comfortable size for the NetBSD root filesystem partition is about 20 MB; a good initial size for the swap partition is twice the amount of physi- cal memory in your machine (though, unlike SunOS 4.x, there are no re- strictions on the size of the swap partition that would render part of your memory unusable). A full binary installation takes about 60 MB in /usr. Most sparc systems have trouble booting if the root partition extends be- yond the first 2 GB of your disk. Configuration of network interfaces Some network devices (i.e. the built-in le interface on sun4m machines) allow a choice between operating on a UTP or a AUI port. The le driver supports automatic detection of the port which is actually connected to the wire. Additionally, some of the Fast ethernet devices (such as be, hme, qec, and qfe) support selection of various speeds and options. The default is to attempt to automatically detect the speed. If automatic detection is not available or not working properly in your environment, you may have to specify the type connection using the media parameter of ifconfig(8). During installation, you'll get the opportuni- ty to specify the appropriate medium. Use 10base5 or AUI to select the AUI connector, or 10baseT or UTP to select the UTP connector. Fast eth- ernet interfaces default to auto, which usually does not detect properly and runs at `10BaseT' speed. The options are 10baseT, 10baseTX, and auto. The hme and qfe interfaces also allow 10baseT-FDX and 100baseT- FDX. Installing the NetBSD System Installing NetBSD is a relatively complex process, but if you have this document in hand it shouldn't be too much trouble. There are several ways to install NetBSD onto your system. The easiest way is to use the miniroot.fs image copied to your local disk's swap par- tition or a scratch drive. If your Sparc is hooked up in a network, you may configure another UNIX-like machine as a netboot server for your Sparc. Alternatively, there is a pair of floppy images that will boot your system and run the installer. For more information on the commands and variables available in the Open- Boot PROM (present in all sun4c and sun4m machines), go to http://docs.sun.com and search for ``openboot reference'' (without quotes). Installing NetBSD by placing a bootable filesystem on a partitioned hard drive installation/miniroot/miniroot.fs.gz is a compressed, self-contained NetBSD filesystem holding all utilities necessary to install NetBSD onto a disk attached to your system. It is distributed as a compressed plain file you will transfer to a raw disk partition. You will then boot this installer using the appropriate PROM command. The simplest case is where you place the miniroot.fs filesystem on the swap partition of your disk. Alternatively, you can place it on any other unused partition on any disk (such as a Zip disk). Be forewarned that you will not be able to install NetBSD onto the partition that contains the miniroot.fs as this partition is needed during the install process. Loading the filesystem onto a raw partition is straightforward. First, download miniroot.fs to your system. Next, reboot in single-user mode (i.e. boot -s) to ensure that your system will not be swapping. Final- ly, place the miniroot.fs on your partition of choice. On NetBSD or SunOS the commands are: # gunzip miniroot.fs.gz # dd if=miniroot.fs of=/dev/rsd0b bs=4k conv=sync Here, /dev/rsd0b is assumed to be your swap partition. If you decide to place miniroot.fs on a non-swap partition, it will overwrite all of the contents of that partition, but you will not need to reboot into single- user mode to write it. After transferring the filesystem to disk, bring the system down by: # halt Then boot the installer by typing the appropriate command at the PROM prompt (this example is for the swap partition): sunmon > b sd(,,1)netbsd -s OpenBoot PROM 1 ok boot sd(,,1)netbsd -s OpenBoot PROM 2 ok boot disk:b netbsd -s The monitor boot command will load the NetBSD kernel contained in the filesystem image. After the initial probe messages you'll be asked to start the install or upgrade procedure. Proceed to the section Running the installation scripts. below. Installing NetBSD by using a bootable CD-ROM If you wish to burn a CD-R containing a bootable NetBSD installation, then you can either burn the prepared disk image in installation/cdrom/netbsd-sparc.iso or create your own. If you wish to create your own, you should follow the directions on the NetBSD Bootable CD-ROM HOW-TO at: http://www.netbsd.org/Documentation/bootcd.html#sparcimage Once you have downloaded netbsd-sparc.iso or created your own disk image, then you need to burn it to a CD-R. The CD-ROM attached to your Sparc must support 512 byte sectors to be bootable. All Sun brand CD-ROMs will work, as well as many other manu- facturers. See the Sun CD-ROM FAQ: http://saturn.tlug.org/suncdfaq/ Sun sets their CD-ROM drives to SCSI ID 6. We recommend you do the same. Boot the installer by typing the appropriate command at the PROM prompt: sunmon > b sd(,30,) OpenBoot PROM 1 ok boot sd(,30,) OpenBoot PROM 2 ok boot cdrom After the initial probe messages you'll be asked to start the install or upgrade procedure. Proceed to the section Running the installation scripts. below. Installing NetBSD by using the bootable floppies The NetBSD install floppies only work on the sun4c and sun4m machines. Making the install floppies is fairly straightforward. NetBSD and SunOS use the same commands. First, get two 1.44 MB floppy disks and format them either using the fdformat(8) command or a PC. # fdformat Be sure that the `fdformat' command completes successfully before pro- ceeding; on NetBSD success is a string of all `V 's', and on SunOS suc- cess is a string of `. 's'. Next, transfer the two floppy images (installation/floppy/disk1.gz and installation/floppy/disk2) to the disks you just formatted. You can do this step from NetBSD, SunOS, or a Windows machine using rawrite.exe (available in the NetBSD/i386 distribution). Insert the first floppy and run the following commands: # gunzip disk1.gz # dd if=disk1 of=/dev/rfd0a bs=36k # eject floppy Insert the second floppy and run the following commands: # dd if=disk2 of=/dev/rfd0a bs=36k # eject floppy Be sure to label your floppies so you can later identify them. Insert the floppy made from disk1 into your Sparc. From the OpenBoot prompt, boot the floppy with the following command: OpenBoot PROM 1 ok boot fd(,,1) OpenBoot PROM 1 (alternate) ok boot /fd OpenBoot PROM 2 ok boot floppy After the initial probe messages you'll be asked to insert the floppy la- beled ``NetBSD disk2''. If the floppy is not automatically ejected, you can either use a straightened paperclip to eject the disk or do the fol- lowing: Press the STOP key (sometimes called the L1 key, found on the left side of your keyboard) and the a key, which will halt your system and give you a PROM prompt. ok eject ok go Now, insert the floppy labeled disk2. After the installation tools have been loaded, you'll be asked to start the install or upgrade procedure. Proceed to the section Running the installation scripts. below. Installing NetBSD by using a netboot setup First, you must setup a netboot server to provide the services and files your client needs. If you are using a NetBSD system as the netboot serv- er, have a look at the diskless(8) manual page for a more detailed guide on how to proceed with this. If the server runs another operating sys- tem, you should consult the NetBSD Diskless HOW-TO, which will walk you through the steps necessary to configure a netboot server on a variety of platforms. http://www.netbsd.org/Documentation/network/netboot/ This section will briefly describe what happens during a Sparc netboot, and the next section will give a brief set of directions on how to set up your server. Your Sparc initially broadcasts a RARP request, and expects a server to reply with your client's IP address. Next, it downloads a second stage bootstrap program via TFTP from the server that responded to the RARP request. It will look for a filename composed of the machine's IP address followed by the machine's architecture, separated by a period. For example, a sun4c machine which has been assigned IP address 130.115.144.11, will make an TFTP request for 8273900B.SUN4C. This file is a symbolic link to the second-stage boot program, which should be lo- cated in a place where the TFTP daemon can find it (remember, many TFTP daemons run in a chroot'ed environment). The boot program to use is installation/netboot/boot.net Alternatively, you can find the bootstrap program in /usr/mdec/boot.net in the NetBSD/sparc distribution. Note: The only difference between /usr/mdec/boot.net and /usr/mdec/boot is in the a.out header, which has been magically transformed in a way that makes it usable on all versions of Sparc PROMs. After the boot program has been loaded into memory and given control by the PROM, it starts locating the machine's remote root directory through the BOOTPARAM protocol. First a BOOTPARAM WHOAMI request is broadcast on the local net. The answer to this request should contain the client's name. This name is used in next step, a BOOTPARAM GETFILE request - sent to the server that responded to the WHOAMI request - requesting the name and address of the machine that will serve the client's root directory, as well as the path of the client's root on that server. Finally, this information is used to issue a REMOTE MOUNT request to the client's root filesystem server, asking for an NFS file handle corre- sponding to the root filesystem. Once the NFS mount is complete, the boot program starts reading from the remote root filesystem in search of the kernel which is then read into memory. Configuring your netboot server Follow this section to configure a NetBSD machine as your netboot server. We will use `CC:CC:CC:CC:CC:CC' as the MAC address (ethernet hardware ad- dress) of your netboot client machine that you wish to install NetBSD on. We use `192.168.1.10' as the IP address of your client, and `client.test.net' as the name. The server name is `server.test.net', and the path on the server to the NFS exported directory is /export/client/root although you may choose to use a different path. Create an /etc/ethers file with the following line: CC:CC:CC:CC:CC:CC client Add your client to the server's /etc/hosts file: 192.168.1.10 client If rarpd is currently running, restart it (kill -HUP), otherwise start rarpd: # /usr/sbin/rarpd -a Next, create /etc/bootparams with the following line: client root=server:/export/client/root If rpc.bootparamd is currently running, restart it (kill -HUP), otherwise start rpc.bootparamd: # /usr/sbin/rpc.bootparamd Now, make sure the bootloader in /tftpboot is linked to, or a copy of, boot.net and is named appropriately for your client (in this case, it would be C0A8010A.SUN4C). # cp boot.net /tftpboot # ln -s /tftpboot/boot.net /tftpboot/C0A8010A.SUN4C Now, you should edit /etc/inetd.conf and make sure that the line starting with tftp is uncommented. You will need to kill -HUP the inetd process to enable tftp if this line was previously commented out. The next step is to set up NFS exports. Create the directory you are exporting for the netboot client: # mkdir -p /export/client/root Put the following line in /etc/exports to enable NFS sharing: /export/client/root -maproot=root client.test.net If your server is currently running NFS services, you only need to kill -HUP the mountd process. Otherwise, you need to run: # /usr/sbin/mountd # /usr/sbin/nfsd -tun 4 Now, you need to place the files your netboot client will need. As noted above in the section Preparing your System for NetBSD Installation you have several options when choosing a location to store the distribution filesets. However, the easiest way is to put the distribution files into the exported directory for your client on the server. # mv *.tgz /export/client/root Your client will need a kernel to boot (use binary/kernel/netbsd.GENERIC.gz). # gunzip netbsd.GENERIC.gz # mv netbsd.GENERIC /export/client/root/netbsd Your client will need installation tools (use installation/netboot/rootfs.tgz). # gunzip < rootfs.tgz | (cd /export/client/root && tar -xpf -) Now, netboot your Sparc from the server by entering the appropriate boot command at the monitor prompt. Depending on the PROM version in your ma- chine, this command takes one of the following forms: sunmon > b le()netbsd OpenBoot PROM 1 ok b le()netbsd OpenBoot PROM 2 ok b net netbsd After the initial probe messages you'll be asked to start the install or upgrade procedure. Proceed to the section Running the installation scripts. below. Installing NetBSD by using a bootable tape Sun sets their tape drives to SCSI ID 4. We recommend you do the same. Get the tape images (installation/tape/tapefile1.gz and installation/tape/tapefile2) and transfer them to a tape. Make sure you use the `no rewind scsi tape' device. Run the following commands: # gunzip tapefile1.gz # mt -f /dev/nrst0 rew # dd if=tapefile1 of=/dev/nrst0 bs=4k # dd if=tapefile2 of=/dev/nrst0 bs=4k Now you can transfer the NetBSD 1.5. distribution sets from (binary/sets) to the tape by using a series of additional # dd if=.tgz of=/dev/nrst0 bs=4k commands. See also the section Getting the NetBSD System on to Useful Media. Be sure to mark the location of these files on the tape; you'll need them during the installation procedure. Insert the tape into your Sparc's tapestation. Boot the installer by typing the appropriate command at the PROM prompt: sunmon > b st() OpenBoot PROM 1 ok boot st() OpenBoot PROM 2 ok boot tape After the initial probe messages you'll be asked to confirm the tape de- vice and tape file number containing the installation tools. Then, pro- ceed to the section Running the installation scripts. below. Running the installation scripts The first thing that the installation scripts will inquire about is the type of console you're using on your machine. If you're using a Sun frame buffer display, choose the terminal type sun (this is presented as the default). Note: if your frame buffer device is a cgsix Sbus board, you should change the terminal type to sun-cgsix to avoid triggering a bug in the board's firmware code that can garble your screen. If you're using a terminal device connected to a serial port, choose a terminal type appropriate for that device, e.g. vt100 or vt200. Next, you will be presented with a choice of two installation methods: a new full-screen sysinst program, or the traditional script-based miniroot program. The sysinst program is easier to use, but the miniroot program is more flexible. Both of these installation methods will follow the same set of procedures and will fully install NetBSD on your Sparc. You will frequently be asked for confirmation before the system proceeds with each phase of the installation process. Occasionally, you will have to provide a piece of information such as the name of the disk you want to install on, partitioning information, or IP addresses and domain names you want to assign. If your system has more than one disk, you may want to look at the output of the dmesg(8) command to see how your disks have been identified by the kernel. Note: If you repartition a hard drive, be certain that every partition starts on a cylinder boundary for compatability with the Sparc ROM. The installation script goes through the following phases: o determination of the disk on which to install NetBSD o checking/creation of the partition information on the disk o creating and mounting the NetBSD filesystems o setup of network configuration o extraction of the distribution tar files o installation of bootstrap programs Now try a reboot. Initially we'd suggest you boot sd()netbsd -bs, then try multiuser after that. If you boot single-user the NetBSD incantation to make the root filesystem writable is # mount -u /dev/sd0a / Your PROM might have been setup to instruct the boot program to load a file called vmunix. On OpenBoot PROM systems you can change it to load netbsd instead using the following commands: OpenBoot PROM 1 ok setenv boot-from sd(0,0,0)netbsd OpenBoot PROM 2 ok setenv boot-file netbsd ok setenv boot-device disk:a Congratulations, you have successfully installed NetBSD 1.5. Post installation steps Once you've got the operating system running, there are a few things you need to do in order to bring the system into a properly configured state, with the most important ones described below. 1. Configuring /etc/rc.conf If you or the installation software haven't done any configuration of /etc/rc.conf, the system will drop you into single user mode on first reboot with the message /etc/rc.conf is not configured. Multiuser boot aborted. and with the root file system (/) mounted read-write. When the sys- tem asks you to choose a shell, simply press RETURN to get to a prompt. If you are asked for a terminal type, respond with sun for a local console, or whatever is appropriate for your serial console (some systems display garbage with a sun terminal type, you may need to use sun-ss5) and press RETURN. At this point, you need to con- figure at least one file in the /etc directory. Change to the /etc directory and take a look at the /etc/rc.conf file. Modify it to your tastes, making sure that you set rc_configured=YES so that your changes will be enabled and a multi-user boot can proceed. Default values for the various programs can be found in /etc/de- faults/rc.conf, where some in-line documentation may be found. More complete documentation can be found in rc.conf(5). If your /usr directory is on a separate partition and you do not know how to use ed, you will have to mount your /usr partition to gain access to ex or vi. Do the following: # mount /usr # export TERM=sun If you have /var on a separate partition, you need to repeat that step for it. After that, you can edit /etc/rc.conf with vi(1). When you have finished, type exit at the prompt to leave the single-user shell and continue with the multi-user boot. Other values that need to be set in /etc/rc.conf for a networked en- vironment are hostname and possibly defaultroute, furthermore add an ifconfig_int for your interface , along the lines of ifconfig_le0="inet 123.45.67.89 netmask 255.255.255.0" ifconfig_de0="inet 123.45.67.89 netmask 255.255.255.0" or, if you have myname.my.dom in /etc/hosts: ifconfig_le0="inet myname.my.dom netmask 255.255.255.0" To enable proper hostname resolution, you will also want to add an /etc/resolv.conf file or (if you are feeling a little more adventur- ous) run named(8). See resolv.conf(5) or named(8) for more informa- tion. Other files in /etc that may require modification or setting up in- clude /etc/mailer.conf, /etc/nsswitch.conf, and /etc/wscons.conf. 2. Logging in After reboot, you can log in as root at the login prompt. There is no initial password, but if you're using the machine in a networked environment, you should create an account for yourself (see below) and protect it and the ``root'' account with good passwords. Unless you have connected an unusual terminal device as the console you can just press RETURN when it prompts for Terminal type? [...] 3. Adding accounts Use the useradd(8) command to add accounts to your system, do not edit /etc/passwd directly. See useradd(8) for more information on how to add a new user to the system. 4. The X Window System If you have installed the X window system, look at the files in /usr/X11R6/lib/X11/doc for information. Don't forget to add /usr/X11R6/bin to your path in your shell's dot file so that you have access to the X binaries. 5. Installing third party packages If you wish to install any of the software freely available for UNIX-like systems you are strongly advised to first check the NetBSD package system. This automatically handles any changes necessary to make the software run on NetBSD, retrieval and installation of any other packages on which the software may depend, and simplifies in- stallation (and deinstallation), both from source and precompiled binaries. o More information on the package system is at http://www.netbsd.org/Documentation/software/packages.html o A browsable listing of available packages is at ftp://ftp.netbsd.org/pub/NetBSD/packages/pkgsrc/README.html o Precompiled binaries can be found at ftp://ftp.netbsd.org/pub/NetBSD/packages/ o Package sources for compiling packages can be obtained by re- trieving the file ftp://ftp.netbsd.org/pub/NetBSD/NetBSD- current/tar_files/pkgsrc.tar.gz They are typically extracted into /usr/pkgsrc (though other lo- cations work fine), as with the command: # mkdir /usr/pkgsrc; tar -C /usr/pkgsrc -zxpf pkgsrc.tar.gz After extracting, then see the README file in the extraction di- rectory (e.g. /usr/pkgsrc/README) for more information. 6. Misc o Edit /etc/mail/aliases to forward root mail to the right place (run newaliases(1) afterwards.) o The /etc/mail/sendmail.cf file will almost definitely need to be adjusted; files aiding in this can be found in /usr/share/sendmail. See the README file there for more infor- mation. o Edit /etc/rc.local to run any local daemons you use. o Many of the /etc files are documented in section 5 of the manu- al; so just invoking # man 5 filename is likely to give you more information on these files. Upgrading a previously-installed NetBSD System The upgrade to NetBSD 1.5 is a binary upgrade; it can be quite difficult to advance to a later version by recompiling from source due primarily to interdependencies in the various components. To do the upgrade, you must boot from the installer kernel using one of the methods described above. To do the upgrade, you must have the boot floppy available. You must also have at least the base and kern binary distribution sets available, so that you can upgrade with them, using one of the upgrade methods described above. Finally, you must have sufficient disk space available to install the new binaries. Since the old binaries are being overwritten in place, you only need space for the new binaries, which weren't previously on the system. If you have a few megabytes free on each of your root (/) and /usr partitions, you should have enough space. Since upgrading involves replacing the boot blocks on your NetBSD parti- tion, the kernel, and most of the system binaries, it has the potential to cause data loss. You are strongly advised to back up any important data on your disk, whether on the NetBSD partition or on another operat- ing system's partition, before beginning the upgrade process. The upgrade procedure using the sysinst tool is similar to an installa- tion, but without the hard disk partitioning. Another difference is that existing configuration files in /etc are backed up and merged with the new files. Getting the binary sets is done in the same manner as the in- stallation procedure; refer to the installation part of the document for how to do this. Also, some sanity checks are done, i.e. file systems are checked before unpacking the sets. After a new kernel has been copied to your hard disk, your machine is a complete NetBSD 1.5 system. However, that doesn't mean that you're fin- ished with the upgrade process. You will probably want to update the set of device nodes you have in /dev. If you've changed the contents of /dev by hand, you will need to be careful about this, but if not, you can just cd into /dev, and run the command # sh MAKEDEV all You must also deal with certain changes in the formats of some of the configuration files. The most notable change is that the options given to many of the file systems in /etc/fstab have changed, and some of the file systems have changed names. To find out what the new options are, it's suggested that you read the manual page for the file system's mount com- mands, for example mount_nfs(8) for NFS. Finally, you will want to delete old binaries that were part of the ver- sion of NetBSD that you upgraded from and have since been removed from the NetBSD distribution. NetBSD/sparc has switched its executable format from the old a.out format to ELF, the now more commonly used and supported format. Your old bina- ries will continue to work just fine. The installation procedure will try to take the necessary steps to accomplish this. The most important step is to move the old a.out shared libraries in /usr/lib and /usr/X11R6/lib (if X was installed) to /emul/aout, where they will be automatically found if an older a.out binary is executed. Sysinst will use an existing /emul and / or /emul/aout directory if available, and will create it (as a symbolic link to /usr/aout) if necessary. If you already had a /emul directory, or a symbolic link by that name, sysinst should rename it and tell you about it. Compatibility Issues With Previous NetBSD Releases Users upgrading from previous versions of NetBSD may wish to bear the following problems and compatibility issues in mind when upgrading to NetBSD 1.5. General issues o /etc/rc modified to use /etc/rc.d/* In previous releases of NetBSD, /etc/rc was a traditional BSD style monolithic file. As of NetBSD 1.5, each discrete program or substem from /etc/rc and /etc/netstart has been moved into separate scripts in /etc/rc.d/. At system startup, /etc/rc uses rcorder(8) to build a dependency list of the files in /etc/rc.d and then executes each script in turn with an argument of `start'. Many rc.d scripts won't start unless the ap- propriate rc.conf(5) entry in /etc/rc.conf is set to `YES.' At system shutdown, /etc/rc.shutdown uses rcorder(8) to build a de- pendency list of the files in /etc/rc.d that have a ``KEYWORD: shutdown'' line, reverses the resulting list, and then executes each script in turn with an argument of `stop'. The following scripts support a specific shutdown method: cron, inetd, local, and xdm. Local and third-party scripts may be installed into /etc/rc.d as nec- essary. Refer to the other scripts in that directory and rc(8) for more information on implementing rc.d scripts. Issues affecting an upgrading from NetBSD 1.4 or later o named(8) leaks version information Previous releases of NetBSD disabled a feature of named(8) where the version number of the server could be determined by remote clients. This feature has not been disabled in NetBSD 1.5, because there is a named.conf(5) option to change the version string: option { version "newstring"; }; o sysctl(8) pathname changed sysctl(8) is moved from /usr/sbin/sysctl to /sbin/sysctl. If you have hardcoded references to the full pathname (in shell scripts, for example) please be sure to update those. o sendmail(8) configuration file pathname changed Due to sendmail(8) upgrade from 8.9.x to 8.10.x, /etc/sendmail.cf is moved to /etc/mail/sendmail.cf. Also, the default sendmail.cf(5) refers different pathnames than before. For example, /etc/aliases is now located at /etc/mail/aliases, /etc/sendmail.cw is now called /etc/mail/local-host-names, and so forth. If you have customized sendmail.cf(5) and friends, you will need to move the files to the new locations. See /usr/share/sendmail/README for more information. Using online NetBSD documentation Documentation is available if you first install the manual distribution set. Traditionally, the ``man pages'' (documentation) are denoted by `name(section)'. Some examples of this are o intro(1), o man(1), o apropros(1), o passwd(1), and o passwd(5). The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8. The man command is used to view the documentation on a topic, and is started by entering man [section] topic. The brackets [] around the sec- tion should not be entered, but rather indicate that the section is op- tional. If you don't ask for a particular section, the topic with the lowest numbered section name will be displayed. For instance, after log- ging in, enter # man passwd to read the documentation for passwd(1). To view the documentation for passwd(5), enter # man 5 passwd instead. If you are unsure of what man page you are looking for, enter apropos subject-word where subject-word is your topic of interest; a list of possibly related man pages will be displayed. Administrivia If you've got something to say, do so! We'd like your input. There are various mailing lists available via the mailing list server at majordomo@netbsd.org. To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instruc- tions. There are various mailing lists set up to deal with comments and ques- tions about this release. Please send comments to: netbsd- comments@netbsd.org. To report bugs, use the send-pr(1) command shipped with NetBSD, and fill in as much information about the problem as you can. Good bug reports in- clude lots of details. Additionally, bug reports can be sent by mail to: netbsd-bugs@netbsd.org. Use of send-pr(1) is encouraged, however, because bugs reported with it are entered into the NetBSD bugs database, and thus can't slip through the cracks. There are also port-specific mailing lists, to discuss aspects of each port of NetBSD. Use majordomo to find their addresses, or visit http://www.netbsd.org/MailingLists/. If you're interested in doing a serious amount of work on a specific port, you probably should contact the `owner' of that port (listed be- low). If you'd like to help with this effort, and have an idea as to how you could be useful, send us mail or subscribe to: netbsd-help@netbsd.org. As a favor, please avoid mailing huge documents or files to these mailing lists. Instead, put the material you would have sent up for FTP or WWW somewhere, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it. Thanks go to o The former members of UCB's Computer Systems Research Group, includ- ing (but not limited to): Keith Bostic Ralph Campbell Mike Karels Marshall Kirk McKusick for their ongoing work on BSD systems, support, and encouragement. o Also, our thanks go to: Mike Hibler Rick Macklem Jan-Simon Pendry Chris Torek for answering lots of questions, fixing bugs, and doing the various work they've done. o UC Berkeley's Experimental Computing Facility provided a home for sun-lamp in the past, people to look after it, and a sense of humor. Rob Robertson, too, has added his unique sense of humor to things, and for a long time provided the primary FTP site for NetBSD. o Vixie Enterprises for hosting the NetBSD FTP, SUP, and WWW servers. o Redback Networks, Inc. for hosting the NetBSD mail and GNATS server. o The Helsinki University of Technology in Finland for hosting the NetBSD CVS server. o The Internet Research Institute in Japan for hosting the server which runs the CVSweb interface to the NetBSD source tree. o The many organisations that provide NetBSD mirror sites. o Without CVS, this project would be impossible to manage, so our hats go off to Brian Berliner, Jeff Polk, and the various other people who've had a hand in making CVS a useful tool. o Dave Burgess burgess@cynjut.infonet.net has been maintaining the 386BSD/NetBSD/FreeBSD FAQ for quite some time, and deserves to be recognized for it. o The following individuals and organizations (each in alphabetical or- der) have made donations or loans of hardware and/or money, to sup- port NetBSD development, and deserve credit for it: Steve Allen Jason Birnschein Mason Loring Bliss Jason Brazile Mark Brinicombe David Brownlee Simon Burge Dave Burgess Ralph Campbell Brian Carlstrom James Chacon Bill Coldwell Charles Conn Tom Coulter Charles D. Cranor Christopher G. Demetriou Scott Ellis Hubert Feyrer Castor Fu Greg Gingerich William Gnadt Michael Graff Guenther Grau Ross Harvey Charles M. Hannum Michael L. Hitch Kenneth Alan Hornstein Jordan K. Hubbard Soren Jorvang Scott Kaplan Noah M. Keiserman Harald Koerfgen John Kohl Chris Legrow Ted Lemon Norman R. McBride Neil J. McRae Perry E. Metzger Toru Nishimura Herb Peyerl Mike Price Dave Rand Michael Richardson Heiko W. Rupp Brad Salai Chuck Silvers Thor Lancelot Simon Bill Sommerfeld Paul Southworth Eric and Rosemary Spahr Ted Spradley Kimmo Suominen Jason R. Thorpe Steve Wadlow Krister Walfridsson Jim Wise Christos Zoulas AboveNet Communications, Inc. Advanced System Products, Inc. Avalon Computer Systems Bay Area Internet Solutions Brains Corporation, Japan Canada Connect Corporation Co-operative Research Centre for Enterprise Distributed Systems Technology Demon Internet, UK Digital Equipment Corporation Distributed Processing Technology Easynet, UK Free Hardware Foundation Innovation Development Enterprises of America Internet Software Consortium MS Macro System GmbH, Germany Numerical Aerospace Simulation Facility, NASA Ames Research Center Piermont Information Systems Inc. Salient Systems Inc. VMC Harald Frank, Germany Warped Communications, Inc. Whitecross Database Systems Ltd. (If you're not on that list and should be, tell us! We probably were not able to get in touch with you, to verify that you wanted to be listed.) o Finally, we thank all of the people who've put sweat and tears into developing NetBSD since its inception in January, 1993. (Obviously, there are a lot more people who deserve thanks here. If you're one of them, and would like to mentioned, tell us!) We are... (in alphabetical order) The NetBSD core group: Alistair Crooks agc@netbsd.org Jun-ichiro itojun Hagino itojun@netbsd.org Frank van der Linden fvdl@netbsd.org Luke Mewburn lukem@netbsd.org Christos Zoulas christos@netbsd.org The portmasters (and their ports): Mark Brinicombe mark@netbsd.org arm32 Jeremy Cooper jeremy@netbsd.org sun3x Ross Harvey ross@netbsd.org alpha Jun-ichiro itojun Hagino itojun@netbsd.org sh3 Ben Harris bjh21@netbsd.org arm26 Eduardo Horvath eeh@netbsd.org sparc64 Darrin Jewell dbj@netbsd.org next68k Soren Jorvang soren@netbsd.org cobalt Soren Jorvang soren@netbsd.org sgimips Wayne Knowles wdk@netbsd.org mipsco Paul Kranenburg pk@netbsd.org sparc Anders Magnusson ragge@netbsd.org vax Minoura Makoto minoura@netbsd.org x68k Phil Nelson phil@netbsd.org pc532 Tohru Nishimura nisimura@netbsd.org luna68k NONAKA Kimihiro nonaka@netbsd.org prep Scott Reynolds scottr@netbsd.org mac68k Kazuki Sakamoto sakamoto@netbsd.org bebox Noriyuki Soda soda@netbsd.org arc Wolfgang Solfrank ws@netbsd.org ofppc Ignatios Souvatzis is@netbsd.org amiga Jonathan Stone jonathan@netbsd.org pmax Shin Takemura takemura@netbsd.org hpcmips Jason Thorpe thorpej@netbsd.org alpha Jason Thorpe thorpej@netbsd.org hp300 Tsubai Masanari tsubai@netbsd.org macppc Tsubai Masanari tsubai@netbsd.org newsmips Izumi Tsutsui tsutsui@netbsd.org news68k Frank van der Linden fvdl@netbsd.org i386 Leo Weppelman leo@netbsd.org atari Nathan Williams nathanw@netbsd.org sun3 Steve Woodford scw@netbsd.org mvme68k The NetBSD 1.5 Release Engineering team: Chris G. Demetriou cgd@netbsd.org Havard Eidnes he@netbsd.org Ted Lemon mellon@netbsd.org John Hawkinson jhawk@netbsd.org Perry Metzger perry@netbsd.org Curt Sampson cjs@netbsd.org Jason Thorpe thorpej@netbsd.org Todd Vierling tv@netbsd.org Developers and other contributors: Steve Allen wormey@netbsd.org Julian Assange proff@netbsd.org Lennart Augustsson augustss@netbsd.org Christoph Badura bad@netbsd.org Robert V. Baron rvb@netbsd.org Erik Berls cyber@netbsd.org John Birrell jb@netbsd.org Mason Loring Bliss mason@netbsd.org Manuel Bouyer bouyer@netbsd.org John Brezak brezak@netbsd.org Allen Briggs briggs@netbsd.org Aaron Brown abrown@netbsd.org David Brownlee abs@netbsd.org Frederick Bruckman fredb@netbsd.org Jon Buller jonb@netbsd.org Simon Burge simonb@netbsd.org Dave Burgess burgess@cynjut.infonet.net Robert Byrnes byrnes@netbsd.org D'Arcy J.M. Cain darcy@netbsd.org Dave Carrel carrel@netbsd.org James Chacon jmc@netbsd.org Bill Coldwell billc@netbsd.org Julian Coleman jdc@netbsd.org Chuck Cranor chuck@netbsd.org Aidan Cully aidan@netbsd.org Johan Danielsson joda@netbsd.org Matt DeBergalis deberg@netbsd.org Rob Deker deker@netbsd.org Chris G. Demetriou cgd@netbsd.org Jaromir Dolecek jdolecek@netbsd.org Andy Doran ad@netbsd.org Roland Dowdeswell elric@netbsd.org Matthias Drochner drochner@netbsd.org Jun Ebihara jun@netbsd.org Havard Eidnes he@netbsd.org Enami Tsugutomo enami@netbsd.org Bernd Ernesti veego@netbsd.org Erik Fair fair@netbsd.org Hubert Feyrer hubertf@netbsd.org Thorsten Frueauf frueauf@netbsd.org Castor Fu castor@netbsd.org Ichiro Fukuhara ichiro@netbsd.org Brian R. Gaeke brg@dgate.org Thomas Gerner thomas@netbsd.org Simon J. Gerraty sjg@netbsd.org Justin Gibbs gibbs@netbsd.org Adam Glass glass@netbsd.org Michael Graff explorer@netbsd.org Brad Grantham grantham@tenon.com Brian C. Grayson bgrayson@netbsd.org Matthew Green mrg@netbsd.org Juergen Hannken-Illjes hannken@netbsd.org Charles M. Hannum mycroft@netbsd.org Eric Haszlakiewicz erh@netbsd.org John Hawkinson jhawk@netbsd.org HAYAKAWA Koichi haya@netbsd.org Rene Hexel rh@netbsd.org Michael L. Hitch mhitch@netbsd.org Christian E. Hopps chopps@netbsd.org Ken Hornstein kenh@netbsd.org Marc Horowitz marc@netbsd.org Nick Hudson skrll@netbsd.org Martin Husemann martin@netbsd.org Dean Huxley dean@netbsd.org Bernardo Innocenti bernie@netbsd.org ITOH Yasufumi itohy@netbsd.org IWAMOTO Toshihiro toshii@netbsd.org Matthew Jacob mjacob@netbsd.org Lonhyn T. Jasinskyj lonhyn@netbsd.org Chris Jones cjones@netbsd.org Takahiro Kambe taca@netbsd.org Antti Kantee pooka@netbsd.org Lawrence Kesteloot kesteloo@cs.unc.edu Thomas Klausner wiz@netbsd.org Klaus Klein kleink@netbsd.org Wayne Knowles wdk@netbsd.org John Kohl jtk@netbsd.org Kevin Lahey kml@netbsd.org Johnny C. Lam jlam@netbsd.org Martin J. Laubach mjl@netbsd.org Ted Lemon mellon@netbsd.org Joel Lindholm joel@netbsd.org Mike Long mikel@netbsd.org Warner Losh imp@netbsd.org Federico Lupi federico@netbsd.org Brett Lymn blymn@netbsd.org Paul Mackerras paulus@netbsd.org David Maxwell david@netbsd.org Dan McMahill dmcmahill@netbsd.org Gregory McGarry gmcgarry@netbsd.org Neil J. McRae neil@netbsd.org Perry Metzger perry@netbsd.org der Mouse mouse@netbsd.org Joseph Myers jsm@netbsd.org Ken Nakata kenn@netbsd.org Bob Nestor rnestor@netbsd.org NONAKA Kimihiro nonaka@netbsd.org Masaru Oki oki@netbsd.org Atsushi Onoe onoe@netbsd.org Greg Oster oster@netbsd.org Herb Peyerl hpeyerl@netbsd.org Matthias Pfaller matthias@netbsd.org Dante Profeta dante@netbsd.org Chris Provenzano proven@netbsd.org Waldi Ravens waldi@moacs.indiv.nl.net Darren Reed darrenr@netbsd.org Michael Richardson mcr@netbsd.org Tim Rightnour garbled@netbsd.org Gordon Ross gwr@netbsd.org Heiko W. Rupp hwr@netbsd.org SAITOH Masanobu msaitoh@netbsd.org Curt Sampson cjs@netbsd.org Wilfredo Sanchez wsanchez@netbsd.org Ty Sarna tsarna@netbsd.org SATO Kazumi sato@netbsd.org Matthias Scheler tron@netbsd.org Karl Schilke (rAT) rat@netbsd.org Konrad Schroder perseant@netbsd.org Reed Shadgett dent@netbsd.org Tim Shepard shep@netbsd.org Takao Shinohara shin@netbsd.org Takuya SHIOZAKI tshiozak@netbsd.org Chuck Silvers chs@netbsd.org Thor Lancelot Simon tls@netbsd.org Jeff Smith jeffs@netbsd.org Bill Sommerfeld sommerfeld@netbsd.org Bill Squier groo@netbsd.org Bill Studenmund wrstuden@netbsd.org Kevin Sullivan sullivan@netbsd.org SUNAGAWA Keiki kei@netbsd.org Kimmo Suominen kim@netbsd.org Matt Thomas matt@netbsd.org Christoph Toshok toshok@netbsd.org UCHIYAMA Yasushi uch@netbsd.org Shuichiro URATA ur@netbsd.org Todd Vierling tv@netbsd.org Aymeric Vincent aymeric@netbsd.org Paul Vixie vixie@netbsd.org Krister Walfridsson kristerw@netbsd.org Lex Wennmacher wennmach@netbsd.org Assar Westerlund assar@netbsd.org Todd Whitesel toddpw@netbsd.org Rob Windsor windsor@netbsd.org Dan Winship danw@netbsd.org Jim Wise jwise@netbsd.org Michael Wolfson mbw@netbsd.org Colin Wood ender@netbsd.org Legal Mumbo-Jumbo All product names mentioned herein are trademarks or registered trade- marks of their respective owners. The following notices are required to satisfy the license terms of the software that we have mentioned in this document: This product includes software developed by the University of California, Berkeley and its contributors. This product includes software developed by The NetBSD Foundation, Inc. This product includes software developed by the NetBSD Foundation, Inc. and its contributors. This product includes software developed by the Computer Systems Engi- neering Group at Lawrence Berkeley Laboratory. This product includes software developed by Adam Glass and Charles Han- num. This product includes software developed by Adam Glass and Charles M. Hannum. This product includes software developed by Adam Glass. This product includes software developed by Alistair G. Crooks. This product includes software developed by Amancio Hasty and Roger Hardiman. This product includes software developed by Berkeley Software Design, Inc. This product includes software developed by Bill Paul. This product includes software developed by Charles D. Cranor and Wash- ington University. This product includes software developed by Charles D. Cranor. This product includes software developed by Charles Hannum, by the Uni- versity of Vermont and State Agricultural College and Garrett A. Wollman, by William F. Jolitz, and by the University of California, Berkeley, Lawrence Berkeley Laboratory, and its contributors. This product includes software developed by Charles Hannum. This product includes software developed by Charles M. Hannum. This product includes software developed by Chris Provenzano. This product includes software developed by Christian E. Hopps. This product includes software developed by Christopher G. Demetriou for the NetBSD Project. This product includes software developed by Christopher G. Demetriou. This product includes software developed by Christos Zoulas. This product includes software developed by David Jones and Gordon Ross. This product includes software developed by Dean Huxley. This product includes software developed by Eric S. Hvozda. This product includes software developed by Ezra Story. This product includes software developed by Gardner Buchanan. This product includes software developed by Gordon Ross. This product includes software developed by Gordon W. Ross and Leo Wep- pelman. This product includes software developed by Gordon W. Ross. This product includes software developed by Hauke Fath. This product includes software developed by HAYAKAWA Koichi. This product includes software developed by Hellmuth Michaelis and Joerg Wunsch. This product includes software developed by Herb Peyerl. This product includes software developed by Holger Veit and Brian Moore for use with "386BSD" and similar operating systems. This product includes software developed by Hubert Feyrer for the NetBSD Project. This product includes software developed by Iain Hibbert. This product includes software developed by Ian W. Dall. This product includes software developed by Ignatios Souvatzis for the NetBSD Project. This product includes software developed by Jason R. Thorpe for And Com- munications, http://www.and.com/. This product includes software developed by Joachim Koenig-Baltes. This product includes software developed by Jochen Pohl for The NetBSD Project. This product includes software developed by John Polstra. This product includes software developed by Jonathan Stone and Jason R. Thorpe for the NetBSD Project. This product includes software developed by Jonathan Stone for the NetBSD Project. This product includes software developed by Jonathan Stone. This product includes software developed by Julian Highfield. This product includes software developed by Kenneth Stailey. This product includes software developed by Leo Weppelman. This product includes software developed by Lloyd Parkes. This product includes software developed by Manuel Bouyer. This product includes software developed by Marc Horowitz. This product includes software developed by Mark Brinicombe. This product includes software developed by Mark Tinguely and Jim Lowe. This product includes software developed by Markus Wild. This product includes software developed by Martin Husemann and Wolfgang Solfrank. This product includes software developed by Mats O Jansson and Charles D. Cranor. This product includes software developed by Mats O Jansson. This product includes software developed by Matthias Pfaller. This product includes software developed by Michael L. Hitch. This product includes software developed by Niels Provos. This product includes software developed by Paul Kranenburg. This product includes software developed by Paul Mackerras. This product includes software developed by Peter Galbavy. This product includes software developed by Philip A. Nelson. This product includes software developed by Rodney W. Grimes. This product includes software developed by Roland C. Dowdeswell. This product includes software developed by Rolf Grossmann. This product includes software developed by Scott Bartram. This product includes software developed by SigmaSoft, Th. Lockert. This product includes software developed by Tatoku Ogaito for the NetBSD Project. This product includes software developed by Terrence R. Lambert. This product includes software developed by Theo de Raadt and John Brezak. This product includes software developed by Theo de Raadt. This product includes software developed by Tohru Nishimura for the NetB- SD Project. This product includes software developed by TooLs GmbH. This product includes software developed by Winning Strategies, Inc. This product includes software developed by Zembu Labs, Inc. This product includes software developed by the Center for Software Sci- ence at the University of Utah. This product includes software developed by the Computer Systems Labora- tory at the University of Utah. This product includes software developed by the University of Calgary De- partment of Computer Science and its contributors. This product includes software developed by the University of Vermont and State Agricultural College and Garrett A. Wollman. This product includes software developed for the FreeBSD project. This product includes software developed for the Internet Software Con- sortium by Ted Lemon. This product includes software developed for the NetBSD Project by Frank van der Linden. This product includes software developed for the NetBSD Project by Jason R. Thorpe. This product includes software developed for the NetBSD Project by John M. Vinopal. This product includes software developed for the NetBSD Project by Matthias Drochner. This product includes software developed for the NetBSD Project by Matthieu Herrb. This product includes software developed for the NetBSD Project by Perry E. Metzger. This product includes software developed for the NetBSD Project by Pier- mont Information Systems Inc. This product includes software developed for the NetBSD Project by Ted Lemon. This product includes software developed by LAN Media Corporation and its contributors. This product includes software developed by Michael Graff for the NetBSD Project. This product includes software developed by Niklas Hallqvist, C Stone and Job de Haas. This product includes software developed by Eric Young (eay@min- com.oz.au). This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/). This product includes software developed by the University of Oregon. This product includes software developed by the University of Southern California and/or Information Sciences Institute. This product includes software developed by Internet Initiative Japan Inc. This product includes software developed by the Alice Group. This product includes software developed by David Miller. NetBSD October 29, 2000 36