INSTALL(8) NetBSD System Manager's Manual INSTALL(8) NAME INSTALL -- Installation procedure for NetBSD/mac68k. CONTENTS About this Document............................................2 What is NetBSD?................................................3 Changes Between The NetBSD 3.0.1 and 3.0.2 updates.............3 Kernel......................................................3 Networking..................................................3 File system.................................................3 Libraries...................................................3 Security....................................................3 Miscellaneous...............................................4 amd64 specific..............................................4 sparc specific..............................................4 mac68k specific.............................................4 Changes Between The NetBSD 3.0 release and 3.0.1 update........4 Kernel......................................................4 Networking..................................................5 File system.................................................5 Libraries...................................................5 Security....................................................6 Miscellaneous...............................................6 acorn26 specific............................................6 amiga specific..............................................6 hp300 specific..............................................6 i386 specific...............................................7 m68k specific...............................................7 mips specific...............................................7 powerpc specific............................................7 sparc specific..............................................7 xen specific................................................7 The Future of NetBSD...........................................7 Sources of NetBSD..............................................8 NetBSD 3.0.2 Release Contents..................................8 NetBSD/mac68k subdirectory structure........................9 Binary distribution sets...................................10 NetBSD/mac68k System Requirements and Supported Devices.......12 Supported models...........................................12 Supported devices..........................................12 Unsupported models.........................................13 Known hardware issues with this release....................13 Getting the NetBSD System on to Useful Media..................13 Preparing your System for NetBSD installation.................14 Installing the NetBSD System (Sysinst Method).................16 Running the sysinst installation program...................16 Introduction............................................16 Possible hardware-specific issues.......................16 General.................................................16 Quick install...........................................17 Booting NetBSD..........................................18 Network configuration...................................19 Preparing a disk for Mac OS and NetBSD..................19 Installation drive selection and parameters.............20 Partitioning the disk...................................20 Preparing your hard disk................................22 Getting the distribution sets...........................22 Installation using ftp..................................23 Installation using NFS..................................23 Installation from CD-ROM................................23 Installation from Mac OS file systems...................23 Installation from an unmounted file system..............23 Installation from a local directory.....................23 Extracting the distribution sets........................24 Finalizing your installation............................24 Installing the NetBSD System (Traditional Method).............24 Preparing the file system(s)...............................24 Installing the files.......................................25 Installation of base files.................................26 Booting the system.........................................26 Post installation steps.......................................27 Upgrading a previously-installed NetBSD System................29 Compatibility Issues With Previous NetBSD Releases............30 Issues affecting an upgrade from NetBSD 2.1 and older......30 Using online NetBSD documentation.............................31 Administrivia.................................................31 Thanks go to..................................................32 We are........................................................37 Legal Mumbo-Jumbo.............................................43 The End.......................................................49 DESCRIPTION About this Document This document describes the installation procedure for NetBSD 3.0.2 on the mac68k platform. It is available in four different formats titled INSTALL.ext, where .ext is one of .ps, .html, .more, or .txt: .ps PostScript. .html Standard Internet HTML. .more The enhanced text format used on UNIX -like systems by the more(1) and less(1) pager utility programs. This is the format in which the on-line man pages are generally pre- sented. .txt Plain old ASCII. You are reading the ASCII version. What is NetBSD? The NetBSD Operating System is a fully functional Open Source UNIX -like operating system derived from the University of California, Berkeley Net- working Release 2 (Net/2), 4.4BSD-Lite, and 4.4BSD-Lite2 sources. NetBSD runs on fifty four different system architectures (ports), featuring sev- enteen machine architectures across fifteen distinct CPU families, and is being ported to more. The NetBSD 3.0.2 release contains complete binary releases for many different system architectures. (A few ports are not fully supported at this time and are thus not part of the binary distri- bution. For information on them, please see the NetBSD web site at .: http://www.NetBSD.org/) NetBSD is a completely integrated system. In addition to its highly por- table, high performance kernel, NetBSD features a complete set of user utilities, compilers for several languages, the X Window System, firewall software and numerous other tools, all accompanied by full source code. NetBSD is a creation of the members of the Internet community. Without the unique cooperation and coordination the net makes possible, it's likely that NetBSD wouldn't exist. Changes Between The NetBSD 3.0.1 and 3.0.2 updates The NetBSD 3.0.2 update is the second security/critical update of the NetBSD 3.0 release branch. This represents a selected subset of fixes deemed critical in nature for stability or security reasons. These fixes will also appear in future releases (NetBSD 3.1 etc), together with other less-critical fixes and feature enhancements. Specific updates are as follows: Kernel o Avoid a panic in page fault handling that could occer under low-mem- ory conditions. Networking o Changed the default sshd_config(8) to enable SSH version 2 only. o Don't accept TCP connections to broadcast addresses. File system o Fixed race condition in NFS renaming that could cause the renamed file to be deleted. Libraries o When a user is created, initialize the string of secondary groups to avoid it containing garbage when none is added. Security o Fixed a buffer overflow in the in-kernel PPP code share by ISDN PPP interfaces ippp(4) and pppoe(4) (SA2006-019). o X11: fixed an integer overflow in FreeType (SA2006-020). o Fixed a potential DoS attack with sendmail(8) (SA2006-017). o Fixed a DoS vulnerability in BIND (SA2006-022). o Fixed a RSA signature forgery in openssl(1) (SA2006-023). o X11: fixed a vulnerability in Adobe Type 1 font handling (SA2006-021). o Fixed a number of DoS vulnerabilities in openssl(1) (SA in prepara- tion, CVE entries: 2006-2937, 2940, 3738 and 4343). o Fixed a number of DoS vulnerabilities in sshd(8) (SA in preparation, CVE entries: 2006-4924 and 5051). Miscellaneous o Fixed cross-building from GCC 4.x hosts. amd64 specific o Make sure that the system reboots after a panic instead of halting. sparc specific o Disabled threading in named(8) on sparc and sparc64 to avoid a crash. mac68k specific o sysinst now newfs'es and mounts the target filesystem(s). Changes Between The NetBSD 3.0 release and 3.0.1 update The NetBSD 3.0.1 update is the first security/critical update of the NetBSD 3.0 release branch. This represents a selected subset of fixes deemed critical in nature for stability or security reasons. These fixes will also appear in future releases (NetBSD 3.1 etc), together with other less-critical fixes and feature enhancements. Specific updates are as follows: Kernel o Hold kernel_lock while calling systrace_exit(). o In systrace_make_msg(), sleep uninterruptibly while waiting for the response from the systrace daemon, so that the message protocol between the kernel and the daemon doesn't get out of sync. o RAIDframe: mark used spares as failed if they encounter IO errors. o wdc(4): after a reset don't wait for drives to come ready if there are no drives (fixes a 30s hang after resume). o Fix support in wd(4) for 1 and 2TB disks. o Fix a bug in the fragment cache which could cause kernel panics (SA2006-004). o Fix a crash caused by azalia(4) when a connection list has invalid NIDs. o aic(4): work around an rbus resource allocation problem so cards work again. o RAIDframe was erroneously re-initializing the Parity Stripe Status pool each time a new array was configured. This causes grief with things like 'vmstat -m' by causing it to loop. Make RAIDframe only initialize PSS bits once. o twe(4): fix a memory leak in the TWEIO_GET_PARAM ioctl. o Prevent system crashes caused by malformed ELF interpreters (SA2006-008). o usb(4): Allow a NULL pointer as argument to usb_get_next_event(), and don't allocate a "struct usb_event" on stack in usb_add_event(). o Check the "oldlen" argument to sysctl(2) before passing it to vslock(9). This prevents a local DOS (SA2006-013). o Use a pmatch(9) expression which should catch all present and future seagate drives larger than 200GB for the WD_QUIRK_FORCE_LBA48 quirks. o Fix the 'audioctl of death' problem (SA2006-014). o Limit the size of any kernel buffers allocated by the VOP_READDIR routines to MAXBSIZE. Networking o Make sure all bridge(4) structs are initialized to 0. o Fix a memory disclosure in bridge(4) (SA2006-005). o Use sigaction(2) to setup automatic disposal of child processes after daemonizing rpc.statd(8). This is more portable and avoids zombie rpc.statd(8) processes after an NFS client running e.g. Mac OS X shuts down. o Prevent system crash when attempting to gather information about a non-existing alias of a network interface via the SIOCGIFALIAS ioctl (SA2006-012). o Fix a panic caused by insufficient validation when parsing IPv6 socket options (SA2006-016). File system o Change union_unmount() to not play with the fs root vnode explicitly. Let it get recycled along with all of the others. This is important as if the root vnode has already been reclaimed, then we get a panic when we try to vget it. Libraries o xdr_rec.c missing a bugfix for an improper security check. The cor- rect way to check for a zero record length is to check for it without the LAST_FRAG marker in it, since it's legal to send a LAST_FRAG marker with 0 bytes of data. o pam_nologin(8): use the class of the user, not then default class, when checking for nologin and ignorelogin login.conf(5) capabilities. o pam_unix(8): fix an uninitialized variable, and remove some unreach- able code. o Make PAM work on NetBSD ports without shared library support. o Make password aging work again. o Fix a bug in signal handling which could e.g get the MySQL daemon stuck in a tight loop after receiving a HUP signal. Security o Improve rnd(4) code probing for the Intel hardware RNG to avoid false detections (SA2006-009). o mail(1) creates record file with insecure umask (SA2006-007). o Fix a remote code execution vulnerability in sendmail (SA2006-010). o A vulnerability was found in the fast_ipsec(4) stack that renders the IPSec anti-replay service ineffective under certain circumstances (SA2006-011). o Fix a number of small security problems with the games. o Fix an FPU Information leak on i386/amd64/Xen platforms with AMD CPUs (SA2006-015). o Fix several integer overflows and NULL-pointer dereferences in freetype2. o Fix a denial of service vulnerability in sendmail when handling mal- formed multipart MIME messages (SA2006-017). Miscellaneous o Sync the Nvidia drivers with XFree86's sources as of December 24th, 2005. These changes fix lots of problems (i.e. freezes) with the latest cards (such as a GeForce 6600GT). o Give systrace its own version of realpath() that does what it wants, call it intercept_realpath(). Unbreaks systrace. o login(1), pam_securetty(8): don't issue a different message for root login on an insecure terminal. o Fix some unpaired sigblocks which possibly leave a process with all signals blocked (esp. apparant under Gnome). o Fix a NULL pointer dereference in ftp(1). o Make sh(1) expand "$@" correctly again. acorn26 specific o Avoid panics under NetBSD/acorn26 whenever a process exits. o Stop NetBSD/acorn26 from allocating eight times as much pool memory as it needs, leading to a rapid exhaustion of physical memory. NetBSD/acorn26 now boots multi-user again. amiga specific o Installer: don't ask for the root device before the user had a chance to identify how it's called under NetBSD. hp300 specific o Fix the bootloader so it doesn't print garbage to the bitmap console. o Fix a huge number of pkgsrc build problems. o Fix boot failure problem on HP400t with fb console. o Fix a problem with the probe of SCSI disks in the installer. i386 specific o Update pciide at pnpbios to work with the last changes to wdc(4), especially the deferral of drive probe. m68k specific o Fix a huge number of pkgsrc build problems. mips specific o Avoid kernel panics caused by binaries compiled with "-mips2" or bet- ter. o Update FPE trapsignal functions for new siginfo. powerpc specific o Avoid pthreads program crashes. sparc specific o For GCC3 and later, use the __builtin_va* constructs. Avoids a build problem with Firefox. xen specific o Avoid dom0 kernel crash when destroying a domain with active I/O going. o Fix the FPU problems detected by paranoia on a NetBSD/Xen guest. o Check the destination ethernet address when not in promiscous mode. Fix a problem where packets would be duplicated, possibly looping, when a domU is doing IP routing. o Avoid panics under high system load. NetBSD 3.0.2 is the ninth major release of NetBSD for the m68k-based Mac- intosh. There is still a lot of work to be done and help is welcomed. NetBSD 3.0.2 on the mac68k platform is, as usual, also fully backward compatible with old NetBSD/mac68k binaries, so you don't need to recom- pile all of your local programs. The Future of NetBSD The NetBSD Foundation has been incorporated as a non-profit organization. Its purpose is to encourage, foster and promote the free exchange of com- puter software, namely the NetBSD Operating System. The foundation will allow for many things to be handled more smoothly than could be done with our previous informal organization. In particular, it provides the framework to deal with other parties that wish to become involved in the NetBSD Project. The NetBSD Foundation will help improve the quality of NetBSD by: o providing better organization to keep track of development efforts, including co-ordination with groups working in related fields. o providing a framework to receive donations of goods and services and to own the resources necessary to run the NetBSD Project. o providing a better position from which to undertake promotional activities. o periodically organizing workshops for developers and other interested people to discuss ongoing work. We intend to begin narrowing the time delay between releases. Our ambi- tion is to provide a full release every six to eight months. We hope to support even more hardware in the future, and we have a rather large number of other ideas about what can be done to improve NetBSD. We intend to continue our current practice of making the NetBSD-current development source available on a daily basis. We intend to integrate free, positive changes from whatever sources sub- mit them, providing that they are well thought-out and increase the usability of the system. Above all, we hope to create a stable and accessible system, and to be responsive to the needs and desires of NetBSD users, because it is for and because of them that NetBSD exists. Sources of NetBSD Refer to .: http://www.NetBSD.org/mirrors/ NetBSD 3.0.2 Release Contents The root directory of the NetBSD 3.0.2 release is organized as follows: .../NetBSD-3.0.2/ CHANGES Changes since earlier NetBSD releases. LAST_MINUTE Last minute changes. MIRRORS A list of sites that mirror the NetBSD 3.0.2 distribution. README.files README describing the distribution's contents. TODO NetBSD 's todo list (also somewhat incomplete and out of date). patches/ Post-release source code patches. source/ Source distribution sets; see below. In addition to the files and directories listed above, there is one directory per architecture, for each of the architectures for which NetBSD 3.0.2 has a binary distribution. The source distribution sets can be found in subdirectories of the source subdirectory of the distribution tree. They contain the complete sources to the system. The source distribution sets are as follows: gnusrc This set contains the ``gnu'' sources, including the source for the compiler, assembler, groff, and the other GNU utilities in the binary distribution sets. 79 MB gzipped, 367 MB uncompressed pkgsrc This set contains the ``pkgsrc'' sources, which contain the in- frastructure to build third-party packages. 24 MB gzipped, 200 MB uncompressed sharesrc This set contains the ``share'' sources, which include the sources for the man pages not associated with any particular program; the sources for the typesettable document set; the dictionaries; and more. 5 MB gzipped, 20 MB uncompressed src This set contains all of the base NetBSD 3.0.2 sources which are not in gnusrc, sharesrc, or syssrc. 37 MB gzipped, 176 MB uncompressed syssrc This set contains the sources to the NetBSD 3.0.2 kernel for all architectures; config(8); and dbsym(8). 26 MB gzipped, 140 MB uncompressed xsrc This set contains the sources to the X Window System. 84 MB gzipped, 450 MB uncompressed All the above source sets are located in the source/sets subdirectory of the distribution tree. The source sets are distributed as compressed tar files. Except for the pkgsrc set, which is traditionally unpacked into /usr/pkgsrc, all sets may be unpacked into /usr/src with the command: # ( cd / ; tar -zxpf - ) set_name.tgz In each of the source distribution set directories, there are files which contain the checksums of the files in the directory: BSDSUM Historic BSD checksums for the various files in that directory, in the format produced by the command: cksum -o 1 file. CKSUM POSIX checksums for the various files in that directory, in the format produced by the command: cksum file. MD5 MD5 digests for the various files in that directory, in the format produced by the command: cksum -m file. SYSVSUM Historic ATT System V UNIX checksums for the various files in that directory, in the format produced by the command: cksum -o 2 file. The MD5 digest is the safest checksum, followed by the POSIX checksum. The other two checksums are provided only to ensure that the widest pos- sible range of system can check the integrity of the release files. NetBSD/mac68k subdirectory structure The mac68k-specific portion of the NetBSD 3.0.2 release is found in the mac68k subdirectory of the distribution: .../NetBSD-3.0.2/mac68k/. It contains the following files and directories: INSTALL.html INSTALL.ps INSTALL.txt INSTALL.more Installation notes in various file formats, including this file. The .more file contains underlined text using the more(1) conventions for indicating italic and bold display. binary/ kernel/ netbsd-GENERIC.gz A kernel containing code for everything supported in this release using the standard SCSI driver. netbsd-GENERICSBC.gz A kernel containing code for everything supported in this release using the SBC variant of the SCSI driver. sets/ mac68k binary distribution sets; see below. installation/ instkernel/ mac68k boot and installation kernels; see instal- lation section (Sysinst Method), below. misc/ Binary distribution sets The NetBSD mac68k binary distribution sets contain the binaries which comprise the NetBSD 3.0.2 release for the mac68k. The binary distribu- tion sets can be found in the mac68k/binary/sets subdirectory of the NetBSD 3.0.2 distribution tree, and are as follows: base The NetBSD 3.0.2 mac68k base binary distribution. You must install this distribution set. It contains the base NetBSD utilities that are necessary for the system to run and be mini- mally functional. It includes shared library support, and excludes everything described below. 16 MB gzipped, 46 MB uncompressed comp Things needed for compiling programs. This set includes the system include files (/usr/include) and the various system libraries (except the shared libraries, which are included as part of the base set). This set also includes the manual pages for all of the utilities it contains, as well as the system call and library manual pages. 18 MB gzipped, 69 MB uncompressed etc This distribution set contains the system configuration files that reside in /etc and in several other places. This set must be installed if you are installing the system from scratch, but should not be used if you are upgrading. 1 MB gzipped, 1 MB uncompressed games This set includes the games and their manual pages. 3 MB gzipped, 7 MB uncompressed kern-GENERIC This set contains a NetBSD/mac68k 3.0.2 GENERIC kernel, named /netbsd. You must install either this distribution set or kern- GENERICSBC. 2 MB gzipped, 3 MB uncompressed kern-GENERICSBC This set contains a NetBSD/mac68k 3.0.2 GENERICSBC kernel, named /netbsd. You must install either this distribution set or kern- GENERIC. 2 MB gzipped, 3 MB uncompressed man This set includes all of the manual pages for the binaries and other software contained in the base set. Note that it does not include any of the manual pages that are included in the other sets. 8 MB gzipped, 30 MB uncompressed misc This set includes the (rather large) system dictionaries, the typesettable document set, and other files from /usr/share. 3 MB gzipped, 9 MB uncompressed text This set includes NetBSD's text processing tools, including groff(1), all related programs, and their manual pages. 2 MB gzipped, 7 MB uncompressed NetBSD maintains its own set of sources for the X Window System in order to assure tight integration and compatibility. These sources are based on XFree86, and tightly track XFree86 releases. They are currently equivalent to XFree86 4.4.0. Binary sets for the X Window System are distributed with NetBSD. The sets are: xbase The basic files needed for a complete X client environment. This does not include the X servers. 6 MB gzipped, 17 MB uncompressed xcomp The extra libraries and include files needed to compile X source code. 10 MB gzipped, 37 MB uncompressed xfont Fonts needed by X. 31 MB gzipped, 39 MB uncompressed xetc Configuration files for X which could be locally modified. 0.03 MB gzipped, 0.17 MB uncompressed xserver The X server. This includes the Xmac68k monochrome server with man pages. 4 MB gzipped, 10 MB uncompressed The mac68k binary distribution sets are distributed as gzipped tar files named with the extension .tgz, e.g. base.tgz. The instructions given for extracting the source sets work equally well for the binary sets, but it is worth noting that if you use that method, the filenames stored in the sets are relative and therefore the files are extracted below the current directory. Therefore, if you want to extract the binaries into your system, i.e. replace the system binaries with them, you have to run the tar -xpf command from the root directory ( / ) of your system. Kernels suitable for booting from an AppleShare server may be found in the mac68k/binary/kernels subdirectory of the NetBSD 3.0.2 distribution tree. These kernels are generally named something like netbsd-GENERIC.gz and can be booted as-is by the NetBSD/mac68k Booter utility, if desired. Please note that these kernels are simply gzipped and are not in tar ar- chives. The Mac OS based utilities necessary for installing and running NetBSD can be found in the mac68k/installation/misc subdirectory of the NetBSD 3.0.2 distribution tree. The important files in this directory are as follows: Booter.sea.hqx The NetBSD/mac68k Booter utility. This program is used to boot the NetBSD kernel from within Mac OS. 141 KB archived Installer.sea.hqx The NetBSD/mac68k Installer utility. This program is used to install the distribution sets onto your NetBSD partition(s). This utility is used only in a Tradi- tional method installation; it is not used or required for an installation using the sysinst method. 147 KB archived Mkfs.sea.hqx The Mkfs utility. This program is used to format your chosen partitions so that they can be used with NetBSD. This utility is used only in a Traditional method installation; it is not used or required for an installation using the sysinst method. 76 KB archived These files are all BinHexed, self-extracting archives. If you need them, the sources for these utilities are in the src subdirectory. This utility is used only in a Traditional method installation. Note: Each directory in the mac68k binary distribution also has its own checksum files, just as the source distribution does. NetBSD/mac68k System Requirements and Supported Devices NetBSD/mac68k 3.0.2 runs on several of the older Macintosh computers. About 4 MB of RAM is sufficient to boot a stripped-down custom kernel, and a subset of the system can be squeezed onto a 40 MB hard disk with considerable creativity and persistence. However, an 80 MB disk should be considered a practical minimum, and to do anything more interesting than booting at least 8 MB of RAM and more disk space is recommended. About 180 MB will be necessary to install all of the NetBSD/mac68k 3.0.2 binary system distribution sets (note that this does not count swap space!). You can drop this to 150 MB if you choose not to install the binary X11 dis- tribution sets. Much more disk space is required to install the source and objects as well; a complete source distribution, including X11, con- sumes nearly 1 GB of storage. Please note that to install NetBSD/mac68k 3.0.2 using the sysinst method, your system must have a minimum of 6 MB of RAM and 60 MB of available disk space (i.e. not part of an in-use HFS partition). Supported models o Mac II, IIx, IIcx, SE/30, IIci, IIsi, IIvx, IIvi o Performa 400/405/410/430, Performa 450, Performa 460/466/467 o Performa 520, Performa 550/560, Performa 600/600CD o LC II, LC III, LC III+, LC 520, LC 550 o MacTV o Classic II, Color Classic o Centris 650 o Quadra 610, Quadra 630, Quadra 650, Quadra 700, Quadra 800 o Quadra/Centris 660AV, Quadra 840AV o PowerBook 140, PowerBook 145/145B, PowerBook 170 o PowerBook 160, PowerBook 165, PowerBook 180 o PowerBook 165c, PowerBook 180c, PowerBook 550c Supported devices o Onboard SCSI bus and most SCSI tapes, hard drives, and CD-ROMs o Internal sound -- enough to beep on some machines, anyway o Most basic NuBus video cards (there have been some problems with some 24-bit color cards and with most QuickDraw acclera- tors) o Both internal serial ports o ADB keyboards and mice (both Apple and a number of third party multi-button mice and trackballs are supported) o Ethernet cards based on the National Semiconductor 8390 and the SONIC (DP83932) chips (Asante, Apple, and a few others -- prob- lems still with Ethernet and many NuBus video cards) o Ethernet cards based on the SMC 91c92 and 91c100 (FEAST) chips. This includes the AsanteFAST 10/100 cards o Onboard Ethernet based on the SONIC chip for Quadra-series Macs o Onboard Ethernet based on the MACE (Am79C940) chip for the Quadra AV-series Macs o Ethernet port on Asante NetDock and Newer Ether MicroDock, for PowerBook Duo series o Comm-slot Ethernet should be working for most machines/cards If your 68030 system is not listed above, it may be because of a problem with accessing onboard video, and it may still work with a serial con- sole. Some of the known ones in this category: o Mac Classic series o PowerBook Duo series If your 68LC040 system is not listed above, it is due to a problem with floating point emulation (FPE) for this type of processor. Machines in this category include: o Newer LC-series machines (47x, 57x) o Newer Performa-series machines (47x, 57x, 58x, 63x, 640) o Some PowerBook 500-series Macs Unsupported models o Macintosh IIfx This machine has unusual custom chips for the ADB and serial interfaces which make support for it difficult. Work is in progress on this, though. o Quadra 900/950 These machines have I/O processor chips for their ADB inter- faces similar to those used in the IIfx and thus face similar support problems. Note that you can use a serial console on these systems. o PowerPC-based Macs This is a separate effort from the mac68k port. PowerMacs use hardware that is often fairly different from that of the mac68k port. If you are interested in this, you might want to take a look at the new NetBSD/macppc port: http://www.NetBSD.org/Ports/macppc/index.html Known hardware issues with this release o Real Time Clock Due to oddities of the Macintosh hardware interrupt priority scheme, NetBSD/mac68k keeps very poor time. Under a high inter- rupt load (e.g. SCSI or serial port activity) , a machine can lose several minutes per hour. A consequence of this problem is that attempting to run ntpd is generally rather pointless. o SCSI difficulties The NetBSD/mac68k SCSI drivers are not quite as robust as their Mac OS counterparts. Symptoms of these problems are that some SCSI disks will not work under NetBSD that work fine under Mac OS. Other problems include occasional file system corruption with some types of drives and the general unreliability of removable SCSI media. Keep in mind that there are no clear patterns with these problems, and they do not appear to affect the majority of users. Getting the NetBSD System on to Useful Media There are currently two installation methods available for initial installation of NetBSD on Apple Macintosh 68000-based systems. Neither supports all installation media types at this time, so the one you select must be compatible with the media you have available on your system. o The sysinst method of installation uses an Installation Kernel which is a minimal NetBSD system with a memory resident set of utilities that are capable of partitioning the disk, initializing the file sys- tems, and loading them from the archive files. Since the installa- tion kernel does not currently support access to Mac OS HFS file sys- tems this method requires that the Binary Distribution Sets be acces- sible from CD-ROM, remote NFS partition, or via FTP access. o The Traditional method of installation uses Mac OS hosted utilities to partition your disk, initialize the partitions for use by NetBSD, and load the file systems from archive files stored on the Mac OS HFS file system. This method requires that the Binary Distribution Sets reside on a local Macintosh hard drive, a CD-ROM, or an AppleShare volume. The Traditional method of installation is currently supported from the local Macintosh hard drive, from a CD-ROM, or from an AppleShare volume (however, you may ugrade a system from within NetBSD; see the Upgrading a previously-installed NetBSD System section for more details). If you are installing from a local hard drive, this means that you'll need at least enough room for the largest file that you will have to install. This is the 15.2 MB base.tgz file. There has been talk of allowing an install from split files. If you have the time, desire, and knowledge, please feel free to add that functionality. If the install is being done from an AppleShare-mounted volume, the NetBSD/mac68k Installer must be in the same folder as the binary distri- bution sets. Each distribution file is in raw archive format. o Distribution files must be downloaded in binary mode. Common web browsers may not be suitable for this task; FTP clients such as Fetch and Anarchie work fine, but be sure to specify a binary file trans- fer. o The files should not be unpacked. If you have the Internet Config extension installed, you can disable this in the ``Helpers'' dialog by removing the entry associated with ``.tgz'' files. Other FTP clients may require separate changes; consult your package's documen- tation. o If you are installing from a CD-ROM, the distribution sets are already in the proper format. No special handling is required. You will also need to collect the Mac OS installation tools from the mac68k/installation/misc subdirectory of the NetBSD 3.0.2 distribution: Mkfs, NetBSD/mac68k Installer, and NetBSD/mac68k Booter. These three are in BinHexed, self-extracting archives as Mkfs.sea.hqx, Installer.sea.hqx, and Booter.sea.hqx, respectively. Extract them as you would any other Macintosh application. Note: The Booter is the only Mac OS application needed if the sysinst method of installation is used. The Traditional method of instal- lation is deprecated and will be removed in a future release, and the Mkfs and Installer tools will be retired. Preparing your System for NetBSD installation No matter which installation method you use, there is some planning and preparation that is required beforehand. First and foremost, before beginning the installation process, make sure you have a reliable backup of any data on your hard disk that you wish to keep. Mistakes in partitioning your hard disk may lead to data loss. NetBSD/mac68k uses the same disk mapping scheme as Mac OS: the Apple Disk Partition Map. This permits both systems to reside on the same disk, but introduces some installation problems unique to the Macintosh. There are very few, if any, reliable ways to reduce the size of an existing Mac OS disk partition, so partitioning a disk that currently contains Mac OS will almost always require a backup and reload step under Mac OS. If you are using the sysinst method of installation you will be able to do most, if not all, of your disk partitioning during the install process. Partitioning the disk with sysinst will destroy any partition that is resized, deleted, converted, or designated for use by NetBSD. All space not planned to be used for Mac OS HFS partitions may be used by NetBSD and can be sub-divided by the sysinst process. This space may be defined within one or more existing disk partitions of any type, includ- ing HFS partitions that are no longer needed for Mac OS. However it is best if this space is physically contiguous on the disk as sysinst is not capable of merging non-contiguous disk partitions. If you are using the sysinst method and have sufficient disk space in one or more disk parti- tions you should skip forward to the section labeled Installing the NetBSD System (Sysinst Method) in this document. If you are using the Traditional method of installation you must use a disk partitioning utility to designate the different partitions you will want in your final NetBSD configuration. It is not necessary to create NetBSD (or AU/X) type partitions at this stage; the Mkfs utility can con- vert a partition of any type to one usable for NetBSD. If disk partitioning is required because you've selected the Traditional method of installation, or because disk space needs to be freed up for use for the sysinst method of installation, follow the directions in the remainder of this section. Find your favorite disk partitioning utility. Any formatter capable of partitioning a SCSI disk should work. Some of the ones that have been tried and seem to work are: o Apple HD SC Setup o Hard Disk ToolKit from FWB o SCSI Director Lite o Disk Manager Mac from OnTrack o Silverlining from LaCie o APS Disk Tools Apple's HD SC Setup is probably the easiest to use and the most commonly available. Instructions for patching HD SC Setup so that it will recog- nize non-Apple drives is available at: http://www.euronet.nl/users/ernstoud/patch.html First, you need to choose a drive on which to install NetBSD. Try to pick a drive with a low SCSI target number (or "SCSI ID"), especially if you are likely to add or remove drives to your SCSI chain in the future. Note: Be certain you have a reliable backup of any data that you may want to keep. Repartitioning your hard drive is an excellent way to destroy important data. Second, decide how you want to set up your partitions. At minimum, you need a partition to hold the NetBSD installation (the root partition -- /) and a partition to serve as swap space. You may choose to use more than one partition to hold the installation. This allows you to separate the more vital portions of the file system (such as the kernel and the /etc directory) from the more volatile parts of the file system. Typical setups place the /usr directory on a separate partition from the root partition (/). Generally, / can be fairly small while the /usr partition should be fairly large. If you plan to use this machine as a server, you may also want a separate /var partition. Once you have decided how to lay out your partitions, you need to calcu- late how much space to allocate to each partition. A minimal install of NetBSD (i.e. base.tgz, etc.tgz, and either kern-GENERIC.tgz or kern-GENERICSBC.tgz) should just fit in a 56 MB partition. For a full installation, you should allocate at least 180 MB (150 MB if you do not wish to install the X sets). A general rule of thumb for sizing the swap partition is to allocate twice as much swap space as you have real mem- ory. Having your swap + real memory total at least 20 MB is also a good idea. Systems that will be heavily used or that are low on real memory should have more swap space allocated. Systems that will be only lightly used or have a very large amount of real memory can get away with less. Keep in mind that NetBSD currently requires Mac OS in order to boot, so it is likely that you will want to keep at least a minimal install of Mac OS around on an HFS partition for this purpose. The size of this parti- tion may vary depending on the size requirements for the version of Mac OS you are using. Of course, if you have Mac OS on another hard drive or can boot from a floppy, feel free to dedicate the entire drive to NetBSD. Next, use your favorite partitioning utility to make partitions of the necessary sizes. You can use any type of partition, but partitions of type Apple_Free might save you some confusion in the future. You are now set to install NetBSD on your hard drive. Installing the NetBSD System (Sysinst Method) Running the sysinst installation program 1. Introduction Using sysinst, installing NetBSD is a relatively easy process. You still should read this document and have it in hand when doing the installation process. This document tries to be a good guideline for the installation and as such covers many details for the sake of completeness. Do not let this discourage you; the install program is not hard to use. 2. Possible hardware-specific issues o SCSI driver problems The SCSI driver used in the kernel on many older Macintosh sys- tems is, by default, the ncrscsi driver. It contains a recog- nized but as yet unfixed bug that affects some disk drive/con- troller combinations, usually Quantum disks. Under heavy load these systems may hang or corrupt the file system; or, you may experience frequent Segmentation fault and Illegal instruction errors that may or may not be consistently repeatable. This latter condition is particularly prevalent on systems with mini- mal RAM installed. If either of these problems occur on your system you are advised to use the SBC variants of the Kernel and Installation Kernel. However, be aware that this issue does not affect e.g. Centris or Quadra systems. o The 68LC040 processor NetBSD has known but unresolved problems running on the 68LC040 processor, the variant of the 68040 that does not contain the floating point unit (FPU). The kernel is thus forced to emulate the missing operations in software. Unfortunately the 68LC040 processor has a design problem that causes the emulation to fail intermittently. We hope to provide a solution for this issue in a future NetBSD release. Software emulation of floating point operations is not a problem on the 68020 and 68030 processors. 3. General The following is a walk-through of the steps you will take while getting NetBSD installed on your hard disk. sysinst is a menu driven installation system that allows for some freedom in doing the installation. Sometimes, questions will be asked and in many cases the default answer will be displayed in brackets (``[ ]'') after the question. If you wish to stop the installation, you may press CONTROL-C at any time, but if you do, you'll have to begin the installation process again from scratch by running the /sysinst pro- gram from the command prompt. It is not necessary to reboot. 4. Quick install First, let's describe a quick install. The other sections of this document go into the installation procedure in more detail, but you may find that you do not need this. If you want detailed instruc- tions, skip to the next section. This section describes a basic installation, using a CD-ROM install as an example. o What you need. - The distribution sets (in this example, they are on CD). - The Mac OS Booter application and an Installation Kernel - A Macintosh with a 68020 and MMU, 68030 or 68RC040 proces- sor. An FPU is not required but will be used if present (but see the note above regarding the 68LC040). - A CD-ROM drive (SCSI), a hard disk and a minimum of 8 MB of memory installed. - The hard disk should have at least 120 + n megabytes of space free, where n is the number of megabytes of main mem- ory in your system. If you wish to install the X Window System as well, you will need at least 120 MB more. o The NetBSD Boot Tools folder. - Create a Folder on your Mac OS disk for the NetBSD/mac68k components. - Copy the Booter application into the newly created Folder. Expand the file if necessary to create the Mac OS exe- cutable. - Copy the Installation Kernels into the newly created Folder. It is not necessary to gunzip compressed kernel files. - Single-click on the Booter application icon then select the "Get Info" from the File Menu list. Increase the memory allocation for the Booter to as much as possible for your system. Having a large number of fonts, extensions or sounds installed on your system can cause memory exhaustion problems for the Booter if you don't do this. Also, the extra memory is needed by the Booter to expand compressed kernels while booting. o The Quick Installation - Double-click on the Booter application icon to start execut- ing it. From the Options pull-down menu, select Monitors, then select Change Monitor Depth and make sure BW is high- lighted. Close the window using the Close button. - From the Options pull-down menu select Boot Options. This will bring up an option panel. Set the Auto-set GMT Bias checkbox in the lower left and then select the Boot from Mac OS option at the top of the window. The Set button on the right will become active. Use it to locate and select the Installation Kernel file appropriate for your hardware. This will be either netbsd-INSTALL.gz or netbsd-INSTALLSBC.gz. Close the window using the Close but- ton. - From the Options pull-down menu select the Boot Now, or use the Apple-B (Command-B) key combination to start the NetBSD boot process. Do not move the mouse while the boot opera- tion is in progress as this may leave the keyboard locked to NetBSD. The main menu will be displayed. .***********************************************. * NetBSD-3.0.2 Install System * * * *a: Install NetBSD to hard disk * * b: Upgrade NetBSD on a hard disk * * c: Re-install sets or install additional sets * * d: Reboot the computer * * e: Utility menu * * x: Exit Install System * .***********************************************. - If you wish, you can configure some network settings immedi- ately by choosing the Utility menu and then Configure network. It isn't actually required at this point, but it may be more convenient. Go back to the main menu. - Choose install. - You will be guided through some steps regarding the setup of your disk, and the selection of distributed components to install. When in doubt, refer to the rest of this document for details. - After your disk has been prepared, choose CD-ROM as the medium. The default values for the path and device should be ok. - After all the files have been unpacked, go back to the main menu and select reboot. - NetBSD will now boot. If you haven't already done so in sysinst, you should log in as root, and set a password for that account. You are also advised to edit the file /etc/rc.conf to match your system needs. - Your installation is now complete. - For configuring the X window system, if installed, see the files in /usr/X11R6/lib/X11/doc. Further information can be found on http://www.xfree86.org/. 5. Booting NetBSD Prior to attempting to boot NetBSD/mac68k verify that all the fol- lowing are done: o Enable 32-bit addressing in the Memory Control Panel [1]. o Disable all forms of virtual memory (the Memory Control Panel, RAM Doubler, or other software-based memory enhancement prod- ucts). o Place the system in BW Mode (1-bit color or grayscale) as shown in the Monitors Control Panel or in the Monitors options dialog of the Booter. You may choose to have the Booter do this for you automatically by selecting the appropriate check box and radio button in the Monitors dialog on the Options menu. It is probably best to boot your machine with all extensions turned off [1]. You can do this by booting into Mac OS with the SHIFT key held down. You may have to restart your Macintosh for changes to take effect before proceeding. [1] If your version of the Memory control panel does not have a 32-bit addressing mode radio button, this means that your sys- tem is already 32-bit clean and is running in 32-bit addressing mode by default. If the Booter complains that your are not in 32-bit mode, it may be necessary for you to press the "Use Defaults" button in the Memory control panel to restore 32-bit addressing. You should probably reboot after doing so. If you have an older II-class system (including the II, IIx, IIcx, and SE/30), it is necessary to install Connectix's MODE32 to work around ROM issues which prevent you from enabling 32-bit addressing. Please see the NetBSD/mac68k FAQ at http://www.NetBSD.org/Ports/mac68k/faq/ for more information. Double-click on the NetBSD/mac68k Booter icon to start the applica- tion. Select Booting from the Options menu. Select the Kernel Location to be from Mac OS with the filename corresponding to the name of the Installation Kernel you are using. Typically this will be netbsd-INSTALL.gz. If you haven't already put your Macintosh into BW mode, select the Monitor Options from the Options menu and check the box for BW mode. Try booting NetBSD by selecting Boot Now from the Options menu. If the system does not come up, send mail to port-mac68k@NetBSD.org describing your software, your hardware, and as complete a descrip- tion of the problem as you can. As an alternative, try using the Traditional method of installation described in the next section. Once NetBSD has booted and printed all the boot messages, you will be presented with a welcome message and a main menu. It will also include instructions for using the menus. 6. Network configuration If you will not use network operation during the installation, but you do want your machine to be configured for networking once it is installed, you should first go to the Utility menu, and select the Configure network option. If you only want to temporarily use net- working during the installation, you can specify these parameters later. If you are not using the Domain Name System (DNS), you can give an empty response in reply to answers relating to this. 7. Preparing a disk for Mac OS and NetBSD sysinst can manipulate the Apple Disk Partition Map allowing you to partition your disk for use with NetBSD. It does not support resiz- ing existing Mac OS HFS disk partitions. If there is insufficient Free space on the disk to support an installation of NetBSD you will need to backup, repartition and restore your existing Mac OS parti- tions before proceeding. You may choose to use a Traditional method of creating disk partitions for NetBSD if you wish. They can still be used by sysinst for a NetBSD installation. 8. Installation drive selection and parameters To start the installation, select Install NetBSD to hard disk from the main menu. To start the installation, select the menu option in install NetBSD from the main menu. The first thing is to identify the disk on which you want to install NetBSD. sysinst will report a list of disks it finds and ask you for your selection. Depending on how many disks are found, you may get a different message. You should see disk names like wd0, wd1, sd0 or sd1. sysinst next tries to figure out how the selected volume has been partitioned. It does this by reading the Apple Disk Partition Map from the disk. If the disk does not have a Partition Map, sysinst will give you the option of writing one, but doing so will not make the disk a Mac OS bootable volume. You will have the option of cre- ating HFS partitions that may be subsequently initialized and used under Mac OS though. 9. Partitioning the disk o Which portion of the disk to use. You will be asked if you want to use the entire disk or only part of the disk. If you decide to use the entire disk for NetBSD, it will be checked if there are already other systems present on the disk, and you will be asked to confirm whether you want to overwrite these. o Definition of the NetBSD disklabel. The Apple Disk Partition Map is used to create an in-core map of the disk called the disklabel. A minimum of two NetBSD parti- tions will be required, one for root and one for swap. Up to eight partitions may be used by NetBSD. Up to 32 partitions may exist on the disk which can be any combination of Mac OS HFS, Free, Scratch and NetBSD partitions, although only the first eight which meet the needs of NetBSD will be seen and mapped to the NetBSD disklabel. Some partitions in the disklabel have a fixed purpose. Parti- tion 'a' is always the root partition, 'b' is the swap partition and 'c' is the entire disk. Partitions 'd' through 'h' are available for other use. Traditionally, 'g' is the partition mounted on the /usr directory, but this is historical practice, not a fixed value. o Editing the NetBSD Disklabel (and the underlying Apple Disk Par- tition Map). You will be presented with the current layout of the disk as seen by NetBSD, and given a change to change it. (Even though NetBSD can only use the first eight qualified partitions, all partitions found on the disk will be displayed.) The partitions found on the disk will be shown in the top section of the dis- play. Each will be identified with the name assigned by NetBSD, the current size, offset, type, use and mount point. The parti- tion currently being modified will be highlighted in inverse video. The bottom part of the display will list the operations which may be performed on the selected (highlighted) partition. The options are: - Select next partition This highlights the next partition in the upper display list and makes it the current one selected for manipulation. - Change selected partition This changes the type assigned to the partition. A parti- tion may be assigned for use as a NetBSD Root, SWAP, Usr, or Root&Usr; it may be assigned for use as a Mac OS HFS parti- tion; a Scratch (for later reassignment); or a Free parti- tion. Free partitions which are physically adjacent to each other will be collapsed into a single Free partition. - Set mount point for partition This designates the NetBSD file system mount point for the partition, and gets transferred into the /etc/fstab defini- tion so NetBSD knows where to mount the file system on sub- sequent boots. The option only applies to NetBSD Root, Usr, Root&Usr or Mac OS HFS partitions, although currently HFS access is not supported without optional software compo- nents. A common set of predefined mount points (/usr, /home, /var, /tmp or None) will be presented to you to assist you in defining the most commonly used, but you may enter you own names if you choose. Selecting "None" will clear the mount point name and keep the partition from being defined in the resulting /etc/fstab file. - Split selected partition This option divides the selected partition into two separate partitions if there is space available in the Disk Partition Map. You will be prompted for the size of the first segment and the remaining portion will be allocated to the second segment. The first segment will be designated as a Scratch type, and the second will be designated as a Free type. To clear a split, or remerge two adjacent partitions into a single one, change both to be Free types. sysinst will merge them and update the display. This is the primary option used to partition the disk since it allows you to sub-divide the selected partition into two partitions. Changing the types associated with the result- ing two parts, or splitting the second part further sub- divides the original partition. - Page Up, Page Down These entries allow you to scroll the upper display if more than eight partitions currently exist on the disk. - Fix selected partition This option reviews the partition's size and starting address and fixes the values if they overlap any adjacent partition. This is primarily a debugging option and shouldn't be necessary during a normal installation. How- ever, some 3rd party disk formatters have been known to cre- ate bogus entries in the Apple Disk Partition Map, and this option can aid is repairing these entries. - Exit This option completes the disk partitioning and returns you to the previous installation menu. At that point you will be given one last opportunity to bail out before committing the changes to the Disk Partition Map recorded on the disk. o Recommended approach to partitioning The simplest method of approaching disk partitioning with sysinst is to convert everything that can be used for NetBSD into a Free type partition. This will allow sysinst to collapse and merge all the available space. Then cycle through the Select, Split, Select, Change, and Set Mount Point options for each of the NetBSD partitions that are desired. Since NetBSD/mac68k has a very specific mount order for partitions during system boot, it is best to create your NetBSD partitions in the following order: Root, SWAP, Usr where the partitions will be mounted in order on 'a', 'b', 'g', 'd', 'e', 'f', and 'h'. At least one Root or Root&Usr is required, and a SWAP partition is highly desirable. As a general rule you will need twice as much swap space as you have RAM, more if you plan on running X, Web applications or doing heavy development in a multi-user environment. The Root partition, if it is separate from your Usr, usually requires about 24 MB. If multiple Root partitions are defined, the second is usually mounted on /altusr by default. NetBSD/mac68k automatically mounts all Root partitions after the first as Usr type parti- tions. However, it is best to be very specific about mount points and partition type and use. You will then be asked to name your disk's disklabel. The default response will be ok for most purposes. If you choose to name it something different, make sure the name is a single word and con- tains no special characters. You don't need to remember this name. 10. Preparing your hard disk You are now at the point of no return. Nothing has been written to your disk yet, but if you confirm that you want to install NetBSD, your hard drive will be modified. If you are sure you want to pro- ceed, enter yes at the prompt. The install program will now label your disk and make the file sys- tems you specified. The file systems will be initialized to contain NetBSD bootstrapping binaries and configuration files. You will see messages on your screen from the various NetBSD disk preparation tools that are running. There should be no errors in this section of the installation. If there are, restart from the beginning of the installation process. Otherwise, you can continue the installa- tion program after pressing the return key. 11. Getting the distribution sets The NetBSD distribution consists of a number of sets, that come in the form of gzipped tarfiles. A few sets must be installed for a working system, others are optional. At this point of the installa- tion, you will be presented with a menu which enables you to choose from one of the following methods of installing the sets. Some of these methods will first load the sets on your hard disk, others will extract the sets directly. For all these methods, the first step is making the sets available for extraction, and then do the actual installation. The sets can be made available in a few different ways. The following sections describe each of those methods. After reading the one about the method you will be using, you can continue to the section labeled `Extracting the distribution sets'. 12. Installation using ftp To be able to install using ftp, you first need to configure your network setup, if you haven't already at the start of the install procedure. sysinst will do this for you, asking you if you want to use DHCP, and if not to provide data like IP address, hostname, etc. If you do not have name service set up for the machine that you are installing on, you can just press RETURN in answer to these ques- tions, and DNS will not be used. You will also be asked to specify the host that you want to transfer the sets from, the directory on that host, the account name and password used to log into that host using ftp, and optionally a proxy server to use. If you did not set up DNS when answering the questions to configure networking, you will need to specify an IP address instead of a hostname for the ftp server. sysinst will proceed to transfer all the default set files from the remote site to your hard disk. 13. Installation using NFS To be able to install using NFS, you first need to configure your network setup, if you haven't already at the start of the install procedure. sysinst will do this for you, asking you if you want to use DHCP, and if not to provide data like IP address, hostname, etc. If you do not have name service set up for the machine that you are installing on, you can just press RETURN in answer to these ques- tions, and DNS will not be used. You will also be asked to specify the host that you want to transfer the sets from, and the directory on that host that the files are in. This directory should be mountable by the machine you are installing on, i.e. correctly exported to your machine. If you did not set up DNS when answering the questions to configure networking, you will need to specify an IP address instead of a hostname for the NFS server. 14. Installation from CD-ROM When installing from a CD-ROM, you will be asked to specify the device name for your CD-ROM player (usually cd0), and the directory name on the CD-ROM where the distribution files are. sysinst will then check if the files are indeed available in the specified location, and proceed to the actual extraction of the sets. 15. Installation from Mac OS file systems NetBSD/mac68k does not currently have in-kernel support for Mac OS HFS/HFS+ or AppleShare filesystems. sysinst therefore can not access the file sets if they are on these filesystems. 16. Installation from an unmounted file system In order to install from a local file system, you will need to spec- ify the device that the file system resides on (for example sd1e) the type of the file system, and the directory on the specified file system where the sets are located. sysinst will then check if it can indeed access the sets at that location. 17. Installation from a local directory This option assumes that you have already done some preparation yourself. The sets should be located in a directory on a file sys- tem that is already accessible. sysinst will ask you for the name of this directory. 18. Extracting the distribution sets After the install sets containing the NetBSD distribution have been made available, you can either extract all the sets (a full instal- lation), or only extract sets that you have selected. In the latter case, you will be shown the currently selected sets, and given the opportunity to select the sets you want. Some sets always need to be installed (kern, base) and etc they will not be shown in this selection menu. Before extraction begins, you can elect to watch the files being extracted; the name of each file that is extracted will be shown. This can slow down the installation process considerably, especially on machines with slow graphics consoles or serial consoles. After all the files have been extracted, all the necessary device node files will be created. If you have already configured network- ing, you will be asked if you want to use this configuration for normal operation. If so, these values will be installed in the net- work configuration files. The next menu will allow you to select the time zone that you're in, to make sure your clock has the right offset from UTC. Finally you will be asked to select a password encryption algorithm and can than set a password for the "root" account, to prevent the machine coming up without access restric- tions. 19. Finalizing your installation Congratulations, you have successfully installed NetBSD 3.0.2. You can now reboot the machine, and boot NetBSD from hard disk. Installing the NetBSD System (Traditional Method) The Traditional method of installation can be broken down into three basic steps: o Run Mkfs to build a file system or file systems. o Run the Installer to load the files onto your file systems. o Run the Booter to boot the system. Preparing the file system(s) Double-click on the Mkfs application icon to start it up. It will ask you for the SCSI-ID (SCSI target number) of the drive that you are installing NetBSD on. Once this is selected, it will present a list of the parti- tions on that disk. You must first convert the partitions to a type which NetBSD can understand. Select each partition on which you wish to build a file system and click on the Change button. If you are placing the entire installation on a single partition, select the NetBSD RootUsr radio but- ton. If you are using multiple partitions, select NetBSD Root for the root partition (/) and NetBSD Usr for all the other partitions. You should select NetBSD Swap for the swap partition. When you have finished converting each partition, select each partition and click on the Format button. You will now be asked for a bunch of parameters for the hard drive and the file system. Usually, you can just take the defaults. If you are installing onto removable media (e.g. a Zip, Jaz, or Syquest), please see the FAQ. Note that although this dialog only has the OK button, you are not committed, yet. Once you get the val- ues you want, press the OK button. A dialog will be presented at this point with two options: Format and Cancel. If you choose Cancel, nothing will be written to your drive. If you choose Format, the program will proceed to make a file system. Mkfs is not a well-behaved Macintosh application. It will not allow any other tasks to run while it does (cooperative multitasking at its best). When it's finished, the program will put up a dialog to ask if you have scanned the output for any error messages. Usually there won't have been any errors, but do scan the output to make sure. Simply click on the I Read It button and the program will quit. Repeat as necessary for any extra partitions that you wish to make file systems on. Note that you do not need a file system on your swap parti- tion. When you are finished, click on the Done button and choose Quit from the File menu to exit Mkfs. Installing the files Before using the Installer, it is probably a good idea to increase its memory allocation. Select the Installer icon by clicking on it and choose Get Info from the File menu. Increase both the Minimum and Preferred sizes to as much as you can spare. Double-click on the Installer icon to start it up. The Installer will present the same SCSI-ID menu that Mkfs did. Select the same SCSI-ID (SCSI target number) that you did for Mkfs - i.e., the one you are installing NetBSD on. If you are installing onto a single root partition (/), proceed to the Installation of base files section, below. If you have not created file systems for / (root), usr, and any other file systems, go back to Preparing the file system(s) above. When you started the Installer, it mounted your root partition (/). Just before it printed Mounting partition 'A' as / it printed lines like: sd1 at scsi ID 5 This means that the device for SCSI target 5 ("SCSI ID 5") is sd1. The partitions are signified by a trailing letter. For instance, sd1a would be the root partition (/) of the second SCSI disk in the chain, and sd0g would be the first Usr partition on the first SCSI disk. You will need to know the proper device to mount the remaining parti- tion(s) by hand: 1. Select Build Devices from the File menu. 2. Select Mini Shell from the File menu. 3. You can use the disklabel command to get a listing of the available partitions and their types and sizes. 4. Create the directory mount point(s) with the command: # mkdir path E.g. for the /usr partition type: # mkdir /usr 5. Mount the file systems you wish with the command: # mount device path For example, if you wish to mount a /usr partition from the first SCSI disk sd0, on /usr, you would type: # mount /dev/sd0g /usr 6. Type # fstab force to create a proper /etc/fstab file. 7. Type quit after you have mounted all the file systems. Installation of base files Select the Install menu item from the File menu and install base.tgz, etc.tgz, either kern-GENERIC.tgz or kern-GENERICSBC.tgz, and any other sets you wish to install at this time (see the NetBSD 3.0.2 Release Contents for information about what's in each set). The Installer will print out the filename of each file as it is installed, and will take quite some time to install everything (the base package alone can take over two hours on a slow hard drive). As is the case with Mkfs, this is not a particularly well-behaved Macin- tosh application and the machine will be completely tied up while the installation takes place. At some point after installing the base set, select the Build Devices option from the File menu if you have not already done so. This will cre- ate a bunch of device nodes for you and will create your initial /etc/fstab. The Installer program also has an option to give you a mini- shell. Do not use this unless you are sure know what you are doing. When you are finished installing all of the sets you wish to install, exit the Installer by choosing Quit from the File menu. Booting the system Prior to attempting to boot NetBSD/mac68k, please verify that all of the following are true: 1. 32-bit addressing is enabled [2] in the Memory control panel; 2. All forms of virtual memory are disabled (the Memory control panel, RAM Doubler, or other software-based memory enhancement products); and 3. Your system is in BW mode (1-bit color or grayscale) as shown by the Monitors control panel. You may choose to have the Booter do this for you automatically by selecting the appropriate check box and radio button in the Monitors dialog on the Options menu. It is probably best to boot your machine with all extensions turned off [2]. You can do this by booting into Mac OS with the SHIFT key held down. You may have to restart your Macintosh for changes to take effect before proceeding. [2] If your version of the Memory control panel does not have a 32-bit addressing mode radio button, this means that your system is already 32-bit clean and is running in 32-bit addressing mode by default. If the Booter complains that you are not in 32-bit mode, it may be necessary for you to press the Use Defaults button in the Memory control panel to restore 32-bit addressing. You should probably reboot after doing so. If you have an older II-class system (including the II, IIx, IIcx, and SE/30), it is necessary to install Connectix's MODE32 to work around ROM issues which prevent you from enabling 32-bit addressing. Please see the NetBSD/mac68k FAQ at http://www.NetBSD.org/Ports/mac68k/faq/ for more information. Double-click on the NetBSD/mac68k Booter icon to start the application. Select Booting from the Options menu. Check that all of the items in the resulting dialog look sane - especially the SCSI target number. If not, correct them to your preference (the SCSI target number, or "SCSI ID", should be the only thing you need to change). When you are satisfied with your choices, try booting NetBSD by selecting Boot Now from the Options menu. If you wish to save your preferences, choose Save Options from the File menu before Booting (your preferences will not be saved if you forget to do this). If the system does not come up, send mail to port-mac68k@NetBSD.org describing your software, your hardware, and as complete a description of the problem as you can. If the system does come up, congratulations, you have successfully installed NetBSD 3.0.2. Post installation steps Once you've got the operating system running, there are a few things you need to do in order to bring the system into a properly configured state, with the most important ones described below. 1. Configuring /etc/rc.conf If you or the installation software haven't done any configuration of /etc/rc.conf (sysinst usually will), the system will drop you into single user mode on first reboot with the message /etc/rc.conf is not configured. Multiuser boot aborted. and with the root file system (/) mounted read-only. When the sys- tem asks you to choose a shell, simply press RETURN to get to a /bin/sh prompt. If you are asked for a terminal type, respond with vt220 (or whatever is appropriate for your terminal type) and press RETURN. You may need to type one of the following commands to get your delete key to work properly, depending on your keyboard: # stty erase '^h' # stty erase '^?' At this point, you need to configure at least one file in the /etc directory. You will need to mount your root file system read/write with: # /sbin/mount -u -w / Change to the /etc directory and take a look at the /etc/rc.conf file. Modify it to your tastes, making sure that you set rc_configured=YES so that your changes will be enabled and a multi- user boot can proceed. Default values for the various programs can be found in /etc/defaults/rc.conf, where some in-line documentation may be found. More complete documentation can be found in rc.conf(5). If your /usr directory is on a separate partition and you do not know how to use ed, you will have to mount your /usr partition to gain access to ex or vi. Do the following: # mount /usr # export TERM=vt220 If you have /var on a separate partition, you need to repeat that step for it. After that, you can edit /etc/rc.conf with vi(1). When you have finished, type exit at the prompt to leave the single- user shell and continue with the multi-user boot. Other values that need to be set in /etc/rc.conf for a networked environment are hostname and possibly defaultroute, furthermore add an ifconfig_int for your network interface, where your on- board, NuBus or PDS interface may be ae0, mc0 or sn0. For example: ifconfig_sn0="inet 123.45.67.89 netmask 255.255.255.0" or, if you have myname.my.dom in /etc/hosts: ifconfig_sn0="inet myname.my.dom netmask 255.255.255.0" To enable proper hostname resolution, you will also want to add an /etc/resolv.conf file or (if you are feeling a little more adventur- ous) run named(8). See resolv.conf(5) or named(8) for more informa- tion. Instead of manually configuring network and naming service, DHCP can be used by setting dhclient=YES in /etc/rc.conf. Other files in /etc that may require modification or setting up include /etc/mailer.conf, /etc/nsswitch.conf, and /etc/wscons.conf. 2. Logging in After reboot, you can log in as root at the login prompt. Unless you've set a password in sysinst, there is no initial password. If you're using the machine in a networked environment, you should cre- ate an account for yourself (see below) and protect it and the ``root'' account with good passwords. By default, root login from the network is disabled (even via ssh(1)). One way to become root over the network is to log in as a different user that belongs to group ``wheel'' (see group(5)) and use su(1) to become root. Unless you have connected an unusual terminal device as the console you can just press RETURN when it prompts for Terminal type? [...]. 3. Adding accounts Use the useradd(8) command to add accounts to your system. Do not edit /etc/passwd directly! See vipw(8) and pwd_mkdb(8) if you want to edit the password database. 4. The X Window System If you have installed the X Window System, look at the files in /usr/X11R6/lib/X11/doc for information. Don't forget to add /usr/X11R6/bin to your path in your shell's dot file so that you have access to the X binaries. 5. Installing third party packages If you wish to install any of the software freely available for UNIX -like systems you are strongly advised to first check the NetBSD package system. This automatically handles any changes necessary to make the software run on NetBSD, retrieval and installation of any other packages on which the software may depend, and simplifies installation (and deinstallation), both from source and precompiled binaries. - More information on the package system is at http://www.NetBSD.org/Documentation/software/packages.html - A list of available packages suitable for browsing is at ftp://ftp.NetBSD.org/pub/NetBSD/packages/pkgsrc/README.html - Precompiled binaries can be found at ,: ftp://ftp.NetBSD.org/pub/NetBSD/packages/ usually in the 3.0.2/mac68k/All subdir. You can install them with the following commands under sh(1): # PKG_PATH=ftp://ftp.NetBSD.org/pub/NetBSD/packages/3.0.2/mac68k/All # export PKG_PATH # pkg_add -v tcsh # pkg_add -v bash # pkg_add -v perl # pkg_add -v apache # pkg_add -v kde # pkg_add -v mozilla ... If you are using csh(1) then replace the first two lines with the following: # setenv PKG_PATH ftp://ftp.NetBSD.org/pub/NetBSD/packages/3.0.2/mac68k/All ... The above commands will install the Tenex-csh and Bourne Again shell, the Perl programming language, Apache web server, KDE desktop environment and the Mozilla web browser as well as all the packages they depend on. - Package sources for compiling packages on your own can be obtained by retrieving the file ftp://ftp.NetBSD.org/pub/NetBSD/NetBSD-current/tar_files/pkgsrc.tar.gz They are typically extracted into /usr/pkgsrc (though other locations work fine), with the commands: # mkdir /usr/pkgsrc # ( cd /usr/pkgsrc ; tar -zxpf - ) pkgsrc.tar.gz After extracting, see the README and doc/pkgsrc.txt files in the extraction directory (e.g. /usr/pkgsrc/README) for more infor- mation. 6. Misc - Edit /etc/mail/aliases to forward root mail to the right place. Don't forget to run newaliases(1) afterwards. - The /etc/mail/sendmail.cf file will almost definitely need to be adjusted; files aiding in this can be found in /usr/share/sendmail. See the README file there for more infor- mation. If you prefer postfix as MTA, adjust /etc/mailer.conf. - Edit /etc/rc.local to run any local daemons you use. - Many of the /etc files are documented in section 5 of the man- ual; so just invoking # man 5 filename is likely to give you more information on these files. Upgrading a previously-installed NetBSD System The upgrade to NetBSD 3.0.2 is a binary upgrade; it can be quite diffi- cult to update the system from an earlier version by recompiling from source, primarily due to interdependencies in the various components. To do the upgrade, you must boot from the installer kernel using one of the methods described above. You must also have at least the base and kern binary distribution sets available, so that you can upgrade with them, using one of the upgrade methods described above. Finally, you must have sufficient disk space available to install the new binaries. Since files already installed on the system are overwritten in place, you only need additional free space for files which weren't previously installed or to account for growth of the sets between releases. If you have a few megabytes free on each of your root (/) and /usr partitions, you should have enough space. Since upgrading involves replacing the kernel, the boot blocks on your NetBSD partition, and most of the system binaries, it has the potential to cause data loss. You are strongly advised to back up any important data on the NetBSD partition or on another operating system's partition on your disk before beginning the upgrade process. The upgrade procedure using the sysinst tool is similar to an installa- tion, but without the hard disk partitioning. sysinst will attempt to merge the settings stored in your /etc directory with the new version of NetBSD. Getting the binary sets is done in the same manner as the installation procedure; refer to the installation part of the document for how to do this. Also, some sanity checks are done, i.e. file sys- tems are checked before unpacking the sets. After a new kernel has been copied to your hard disk, your machine is a complete NetBSD 3.0.2 system. However, that doesn't mean that you're finished with the upgrade process. You will probably want to update the set of device nodes you have in /dev. If you've changed the contents of /dev by hand, you will need to be careful about this, but if not, you can just cd into /dev, and run the command: # sh MAKEDEV all Finally, you will want to delete old binaries that were part of the ver- sion of NetBSD that you upgraded from and have since been removed from the NetBSD distribution. NetBSD/mac68k has switched its executable format from the old a.out for- mat to ELF, the now more commonly used and supported format. Your old binaries will continue to work just fine. The installation procedure will try to take the necessary steps to accomplish this. The most important step is to move the old a.out shared libraries in /usr/lib and /usr/X11R6/lib (if X was installed) to /emul/aout, where they will be automatically found if an older a.out binary is executed. Sysinst will use an existing /emul and / or /emul/aout directory if available, and will create it (as a symbolic link to /usr/aout) if necessary. If you already had a /emul directory, or a symbolic link by that name, sysinst should rename it and tell you about it. Compatibility Issues With Previous NetBSD Releases Users upgrading from previous versions of NetBSD may wish to bear the following problems and compatibility issues in mind when upgrading to NetBSD 3.0.2. Issues affecting an upgrade from NetBSD 2.1 and older releases. It is very important that you populate the directory /etc/pam.d with appropriate configuration files for the Pluggable Authentication Modules (PAM) because you will not be able to login any more otherwise. Using postinstall as described below will take care of this. Please refer to http://www.netbsd.org/guide/en/chap-pam.html for documentation about PAM. The following issues can generally be resolved by extracting the etc set into a temporary directory and running postinstall: postinstall -s /path/to/etc.tgz check postinstall -s /path/to/etc.tgz fix Issues fixed by postinstall: - Various files in /etc need upgrading. These include: o /etc/defaults/* o /etc/mtree/* o /etc/pam.d/* o /etc/daily o /etc/weekly o /etc/monthly o /etc/security o /etc/rc.subr o /etc/rc o /etc/rc.shutdown o /etc/rc.d/* The following issues need to be resolved manually: o The user `_pflogd' and the groups `_pflogd' and `authpf' need to be created. Using online NetBSD documentation Documentation is available if you first install the manual dis- tribution set. Traditionally, the ``man pages'' (documenta- tion) are denoted by `name(section)'. Some examples of this are o intro(1), o man(1), o apropros(1), o passwd(1), and o passwd(5). The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative informa- tion is in section 8. The man command is used to view the documentation on a topic, and is started by entering man [section] topic. The brackets [] around the section should not be entered, but rather indi- cate that the section is optional. If you don't ask for a par- ticular section, the topic with the lowest numbered section name will be displayed. For instance, after logging in, enter # man passwd to read the documentation for passwd(1). To view the documen- tation for passwd(5), enter # man 5 passwd instead. If you are unsure of what man page you are looking for, enter apropos subject-word where subject-word is your topic of interest; a list of possi- bly related man pages will be displayed. Administrivia If you've got something to say, do so! We'd like your input. There are various mailing lists available via the mailing list server at majordomo@NetBSD.org. To get help on using the mail- ing list server, send mail to that address with an empty body, and it will reply with instructions. There are various mailing lists set up to deal with comments and questions about this release. Please send comments to: netbsd-comments@NetBSD.org. To report bugs, use the send-pr(1) command shipped with NetBSD, and fill in as much information about the problem as you can. Good bug reports include lots of details. Additionally, bug reports can be sent by mail to: netbsd-bugs@NetBSD.org. Use of send-pr(1) is encouraged, however, because bugs reported with it are entered into the NetBSD bugs database, and thus can't slip through the cracks. There are also port-specific mailing lists, to discuss aspects of each port of NetBSD. Use majordomo to find their addresses, or visit http://www.NetBSD.org/MailingLists/. If you're interested in doing a serious amount of work on a specific port, you probably should contact the `owner' of that port (listed below). If you'd like to help with this effort, and have an idea as to how you could be useful, send us mail or subscribe to: netbsd-help@NetBSD.org. As a favor, please avoid mailing huge documents or files to these mailing lists. Instead, put the material you would have sent up for FTP or WWW somewhere, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it. Thanks go to o The former members of UCB's Computer Systems Research Group, including (but not limited to): Keith Bostic Ralph Campbell Mike Karels Marshall Kirk McKusick for their ongoing work on BSD systems, support, and encour- agement. o The Internet Systems Consortium, Inc. for hosting the NetBSD FTP, CVS, AnonCVS, mail, mail archive, GNATS, SUP, Rsync and WWW servers. o The Internet Research Institute in Japan for hosting the server which runs the CVSweb interface to the NetBSD source tree. o The Helsinki University of Technology in Finland for host- ing the NetBSD backup CVS and backup server. o SSH Communications Security in Finland for operating the backup server. o The many organizations that provide NetBSD mirror sites. o Without CVS, this project would be impossible to manage, so our hats go off to Brian Berliner, Jeff Polk, and the vari- ous other people who've had a hand in making CVS a useful tool. o The following individuals and organizations (each in alpha- betical order) have made donations or loans of hardware and/or money, to support NetBSD development, and deserve credit for it: AMD - Advanced Micro Devices, Inc. ASA Computers Aaron Wall ABE Masayuki AboveNet Communications, Inc. Achim Grolms Adam Kasper Adaptec Advanced System Products, Inc. Akihiro IIJIMA Alex Poylisher Algorithmics, Ltd. Alistair Crooks Allegro Networks Aloys Keller Andreas Berg Andreas Jellinghaus Andrew Brown Andrew Gillham Andy Hagans Antonio Larripa Arend Harrewijne Armijn Hemel Atsushi YOKOYAMA Avalon Computer Systems Bay Area Internet Solutions Ben Collver Benoit Lepage Bernhard Moellemann Bill Coldwell Bill Sommerfeld Bill Squier Brad Salai Brains Corporation, Japan Brian Carlstrom Brian McGroarty Brian Mitchell Canada Connect Corporation Carl Shapiro Castor Fu Central Iowa (Model) Railroad Charles Conn Charles D. Cranor Charles M. Hannum Chris Legrow Chris Townsend Christer O. Andersson Christopher G. Demetriou Christos Zoulas Chuck Silvers Cologne Chip AG Computer und Literatur Verlag Computertechnik Krienke & Nolte Computing Services Department, The University of Liverpool Convert Tools Co-operative Research Centre for Enterprise Distributed Curt Sampson DAYOMON from Japan Damicon Kraa, Finland Daniel de Kok Dave Burgess Dave Rand Dave Tyson David Brownlee Dayton Clark Demon Internet, UK Derek Fellion Digital Equipment Corporation Distributed Processing Technology Distro Jockey Douglas J. Trainor Dr.ir. F.W. Dillema Easynet, UK Ed Braaten Edward Richley emuty Eric and Rosemary Spahr Erik Berls Erik E. Fair Erkki Ruohtula Ernst Lehmann Espen Randen Ewald Kicker Florent Parent Frank Kardel Free Hardware Foundation Front Range *BSD User Group FUKAUMI Naoki Gan Uesli Starling Garth R. Patil Geert Hendrickx (ghen) Geert Jan de Groot GK Meier Gordon Zaft Grant Beattie Greg Gingerich Greg Girczyc Guenther Grau HP Sweden Hanno Wagner Hans Huebner Harald Koerfgen Haroon Khalid Harry McDonald Hauke Fath Heiko W. Rupp Herb Peyerl Hernani Marques Madeira Hidekichi Ookubo Hideyuki Kido Hisashi Fujinaka Holger Weiss Hubert Feyrer IBM Corporation IMAI Kiyoshi Innovation Development Enterprises of America Intel Internet Software Consortium Internet Users Forever IKI Interoute Telecommunications, UK JNUG (raised at JNUG meeting & BOF August 2005) James Bursa James Chacon Jan Joris Vereijken Jason Birnschein Jason Brazile Jason R. Thorpe Jeff Rizzo Jeff Woodall - Portland, OR Jens Schoenfeld Jim Wise Joachim Nink Joachim Thiemann Joel CARNAT John Heasley John Kohl John P. Refling Jonathan P. Kay Jordan K. Hubbard Jorgen Lundman Karl Wagner Kenji Hisazumi Kenneth Alan Hornstein Kenneth P. Stox Kevin Keith Woo Kevin Sullivan Klaus Lichti Kimmo Suominen Korea BSD User Forum Krister Waldfridsson Kwok Ng Lars Mathiassen Lehmanns Fachbochhandlung Lex Wennmacher LinuxFest Northwest Luke Maurits Luke Mewburn MS Macro System GmbH, Germany Maki Kato Marc Tooley Marcus Wyremblewski Mark Brinicombe Mark Houde Mark Perkins Mark S. Thomas Mason Loring Bliss Martin Cernohorsky Martin J. Ekendahl Matt Dainty Matt Thomas Matthew Jacob Matthew Sporleder Matthias Scheler Mattias Karlsson Mel Kravitz Michael Graff Michael "Kvedulv" Moll Michael L. Hitch Michael Richardson Michael Thompson Michael W. James Mike Price Mirko Thiesen (Thiesi) Murphy Software BV, Netherlands Neil J. McRae Noah M. Keiserman Norman R. McBride Numerical Aerospace Simulation Facility, NASA Ames Research Olaf "Rhialto" Seibert Oliver Cahagne Oppedahl & Larson LLP Palle Lyckegaard Paul Ripke Paul Southworth Pawel Rogocz Pearson Education Perry E. Metzger Petar Bogdanovic Peter C. Wallace Peter J. Bui Peter Postma Petri T. Koistinen Phil Thomas Piermont Information Systems Inc. Pierre-Philipp Braun Precedence Technologies Ltd Public Access Networks Corporation Ralph Campbell Randy Ray Real Weasel Reinoud Zandijk Renewed Health Company Richard Nelson Rob Windsor Robert Pankratz Robert Thille Roland Lichti Ross Harvey Ryan Campbell SDF Public Access Unix, Inc. 501(c)(7) SMC Networks Inc. Salient Systems Inc. Sander van Dijk Scott Ellis Scott Kaplan Scott Walters Sean Davis Simon Burge Soren Jacobsen Soren Jorvang Stephen Borrill Stephen Early Steve Allen Steve Wadlow Steven M. Bellovin SunROOT# Project Sylvain Schmitz Takahiro Kambe TAKEUCHI Yoji Tamotsu Kanoh Tasis Michalakopoulos (Athens, Greece) Tatoku Ogaito Ted Lemon Ted Spradley The Names Database The NetBSD Mission The People's Republic of Ames Thierry Lacoste Thierry Laronde Thomas Runge Thor Lancelot Simon Tim Law Timo Scholer Tino Hanich Tino Wildenhain Tom Coulter Tom Ivar Helbekkmo Tom Lyon Tomas Dabasinskas Torsten Harenberg Toru Nishimura Toshiba Turbocat's Development Tyler Sarna UTN Web Directory VMC Harald Frank, Germany Warped Communications, Inc. Wasabi Systems, Inc. Whitecross Database Systems Ltd. William Gnadt Worria Affordable Web Hosting Worria Web Hosting wwwTrace Traceroute Server Directory Yusuke Yokota Zach Metzinger (If you're not on that list and should be, tell us! We probably were not able to get in touch with you, to verify that you wanted to be listed.) o Finally, we thank all of the people who've put sweat and tears into developing NetBSD since its inception in Jan- uary, 1993. (Obviously, there are a lot more people who deserve thanks here. If you're one of them, and would like to mentioned, tell us!) We are... (in alphabetical order) The NetBSD core group: Allen Briggs briggs@NetBSD.org Matt Thomas matt@NetBSD.org Valeriy E. Ushakov uwe@NetBSD.org YAMAMOTO Takashi yamt@NetBSD.org Christos Zoulas christos@NetBSD.org The portmasters (and their ports): ~ Allen Briggs briggs@NetBSD.org sandpoint Anders Magnusson ragge@NetBSD.org vax Andrey Petrov petrov@NetBSD.org sparc64 Ben Harris bjh21@NetBSD.org acorn26 Chris Gilbert chris@NetBSD.org cats Christian Limpach cl@NetBSD.org xen Eduardo Horvath eeh@NetBSD.org evbppc Frank van der Linden fvdl@NetBSD.org amd64 Frank van der Linden fvdl@NetBSD.org i386 Gavan Fantom gavan@NetBSD.org iyonix IWAMOTO Toshihiro toshii@NetBSD.org hpcarm Ichiro Fukuhara ichiro@NetBSD.org hpcarm Ignatios Souvatzis is@NetBSD.org amiga Izumi Tsutsui tsutsui@NetBSD.org hp300 Izumi Tsutsui tsutsui@NetBSD.org news68k Jason Thorpe thorpej@NetBSD.org algor Jason Thorpe thorpej@NetBSD.org evbarm Jason Thorpe thorpej@NetBSD.org shark Jeremy Cooper jeremy@NetBSD.org sun3 Jonathan Stone jonathan@NetBSD.org pmax Julian Coleman jdc@NetBSD.org atari Jun-ichiro itojun Hagino itojun@NetBSD.org evbsh3 Jun-ichiro itojun Hagino itojun@NetBSD.org mmeye Kazuki Sakamoto sakamoto@NetBSD.org bebox Lennart Augustsson augustss@NetBSD.org pmppc Marcus Comstedt marcus@NetBSD.org dreamcast Martin Husemann martin@NetBSD.org sparc64 Matt DeBergalis deberg@NetBSD.org next68k Matt Fredette fredette@NetBSD.org hp700 Matt Fredette fredette@NetBSD.org sun2 Matt Thomas matt@NetBSD.org alpha Matt Thomas matt@NetBSD.org netwinder Matthias Drochner drochner@NetBSD.org cesfic NISHIMURA Takeshi nsmrtks@NetBSD.org x68k NONAKA Kimihiro nonaka@NetBSD.org prep Nathan Williams nathanw@NetBSD.org sun3 Noriyuki Soda soda@NetBSD.org arc Paul Kranenburg pk@NetBSD.org sparc Phil Nelson phil@NetBSD.org pc532 Reinoud Zandijk reinoud@NetBSD.org acorn32 Ross Harvey ross@NetBSD.org alpha Soren Jorvang soren@NetBSD.org cobalt Soren Jorvang soren@NetBSD.org sgimips Scott Reynolds scottr@NetBSD.org mac68k Shin Takemura takemura@NetBSD.org hpcmips Simon Burge simonb@NetBSD.org evbmips Simon Burge simonb@NetBSD.org evbppc Simon Burge simonb@NetBSD.org pmax Simon Burge simonb@NetBSD.org sbmips Steve Woodford scw@NetBSD.org evbsh5 Steve Woodford scw@NetBSD.org mvme68k Steve Woodford scw@NetBSD.org mvmeppc Tohru Nishimura nisimura@NetBSD.org luna68k Tsubai Masanari tsubai@NetBSD.org macppc Tsubai Masanari tsubai@NetBSD.org newsmips UCHIYAMA Yasushi uch@NetBSD.org hpcsh UCHIYAMA Yasushi uch@NetBSD.org playstation2 Wayne Knowles wdk@NetBSD.org mipsco Wolfgang Solfrank ws@NetBSD.org ofppc The NetBSD 3.0.2 Release Engineering team: Grant Beattie grant@NetBSD.org Erik Berls cyber@NetBSD.org James Chacon jmc@NetBSD.org Julian Coleman jdc@NetBSD.org Havard Eidnes he@NetBSD.org Jun-ichiro itojun Hagino itojun@NetBSD.org Geert Hendrickx ghen@NetBSD.org Soren Jacobsen snj@NetBSD.org SAITOH Masanobu msaitoh@NetBSD.org Luke Mewburn lukem@NetBSD.org Jeff Rizzo riz@NetBSD.org Matthias Scheler tron@NetBSD.org Curt Sampson cjs@NetBSD.org Jim Wise jwise@NetBSD.org NetBSD Developers: Nathan Ahlstrom nra@NetBSD.org Steve Allen wormey@NetBSD.org Jukka Andberg jandberg@NetBSD.org Julian Assange proff@NetBSD.org Lennart Augustsson augustss@NetBSD.org Christoph Badura bad@NetBSD.org Bang Jun-Young junyoung@NetBSD.org Dieter Baron dillo@NetBSD.org Robert V. Baron rvb@NetBSD.org Grant Beattie grant@NetBSD.org Jason Beegan jtb@NetBSD.org Erik Berls cyber@NetBSD.org Hiroyuki Bessho bsh@NetBSD.org John Birrell jb@NetBSD.org Mason Loring Bliss mason@NetBSD.org Charles Blundell cb@NetBSD.org Rafal Boni rafal@NetBSD.org Sean Boudreau seanb@NetBSD.org Manuel Bouyer bouyer@NetBSD.org John Brezak brezak@NetBSD.org Allen Briggs briggs@NetBSD.org Mark Brinicombe mark@NetBSD.org Aaron Brown abrown@NetBSD.org Andrew Brown atatat@NetBSD.org David Brownlee abs@NetBSD.org Frederick Bruckman fredb@NetBSD.org Jon Buller jonb@NetBSD.org Simon Burge simonb@NetBSD.org Robert Byrnes byrnes@NetBSD.org D'Arcy J.M. Cain darcy@NetBSD.org Dave Carrel carrel@NetBSD.org Daniel Carosone dan@NetBSD.org James Chacon jmc@NetBSD.org Bill Coldwell billc@NetBSD.org Julian Coleman jdc@NetBSD.org Ben Collver ben@NetBSD.org Jeremy Cooper jeremy@NetBSD.org Chuck Cranor chuck@NetBSD.org Alistair Crooks agc@NetBSD.org Aidan Cully aidan@NetBSD.org Johan Danielsson joda@NetBSD.org John Darrow jdarrow@NetBSD.org Jed Davis jld@NetBSD.org Matt DeBergalis deberg@NetBSD.org Rob Deker deker@NetBSD.org Chris G. Demetriou cgd@NetBSD.org Tracy Di Marco White gendalia@NetBSD.org Jaromir Dolecek jdolecek@NetBSD.org Andy Doran ad@NetBSD.org Roland Dowdeswell elric@NetBSD.org Emmanuel Dreyfus manu@NetBSD.org Matthias Drochner drochner@NetBSD.org Jun Ebihara jun@NetBSD.org Elad Efrat elad@NetBSD.org Havard Eidnes he@NetBSD.org Stoned Elipot seb@NetBSD.org Michael van Elst mlelstv@NetBSD.org Enami Tsugutomo enami@NetBSD.org Bernd Ernesti veego@NetBSD.org Erik Fair fair@NetBSD.org Gavan Fantom gavan@NetBSD.org Hubert Feyrer hubertf@NetBSD.org Jason R. Fink jrf@NetBSD.org Matt Fredette fredette@NetBSD.org Thorsten Frueauf frueauf@NetBSD.org Castor Fu castor@NetBSD.org Ichiro Fukuhara ichiro@NetBSD.org Quentin Garnier cube@NetBSD.org Thomas Gerner thomas@NetBSD.org Simon J. Gerraty sjg@NetBSD.org Justin Gibbs gibbs@NetBSD.org Chris Gilbert chris@NetBSD.org Eric Gillespie epg@NetBSD.org Adam Glass glass@NetBSD.org Michael Graff explorer@NetBSD.org Brian C. Grayson bgrayson@NetBSD.org Matthew Green mrg@NetBSD.org Andreas Gustafsson gson@NetBSD.org Jun-ichiro itojun Hagino itojun@NetBSD.org Juergen Hannken-Illjes hannken@NetBSD.org Charles M. Hannum mycroft@NetBSD.org Ben Harris bjh21@NetBSD.org Ross Harvey ross@NetBSD.org Eric Haszlakiewicz erh@NetBSD.org John Hawkinson jhawk@NetBSD.org HAMAJIMA Katsuomi hamajima@NetBSD.org HAYAKAWA Koichi haya@NetBSD.org John Heasley heas@NetBSD.org Geert Hendrickx ghen@NetBSD.org Rene Hexel rh@NetBSD.org Kouichirou Hiratsuka hira@NetBSD.org Michael L. Hitch mhitch@NetBSD.org Christian E. Hopps chopps@NetBSD.org Ken Hornstein kenh@NetBSD.org Marc Horowitz marc@NetBSD.org Eduardo Horvath eeh@NetBSD.org Nick Hudson skrll@NetBSD.org Shell Hung shell@NetBSD.org Martin Husemann martin@NetBSD.org Dean Huxley dean@NetBSD.org Love Hornquist Astrand lha@NetBSD.org Bernardo Innocenti bernie@NetBSD.org Tetsuya Isaki isaki@NetBSD.org ITOH Yasufumi itohy@NetBSD.org IWAMOTO Toshihiro toshii@NetBSD.org Matthew Jacob mjacob@NetBSD.org Soren Jacobsen snj@NetBSD.org Lonhyn T. Jasinskyj lonhyn@NetBSD.org Darrin Jewell dbj@NetBSD.org Chris Jones cjones@NetBSD.org Soren Jorvang soren@NetBSD.org Takahiro Kambe taca@NetBSD.org Antti Kantee pooka@NetBSD.org Masanori Kanaoka kanaoka@NetBSD.org Frank Kardel kardel@NetBSD.org Mattias Karlsson keihan@NetBSD.org KAWAMOTO Yosihisa kawamoto@NetBSD.org Mario Kemper magick@NetBSD.org Min Sik Kim minskim@NetBSD.org Thomas Klausner wiz@NetBSD.org Klaus Klein kleink@NetBSD.org John Klos jklos@NetBSD.org Wayne Knowles wdk@NetBSD.org Takayoshi Kochi kochi@NetBSD.org John Kohl jtk@NetBSD.org Daniel de Kok daniel@NetBSD.org Paul Kranenburg pk@NetBSD.org Martti Kuparinen martti@NetBSD.org Kentaro A. Kurahone kurahone@NetBSD.org Kevin Lahey kml@NetBSD.org Johnny C. Lam jlam@NetBSD.org Martin J. Laubach mjl@NetBSD.org Greg Lehey grog@NetBSD.org Ted Lemon mellon@NetBSD.org Christian Limpach cl@NetBSD.org Frank van der Linden fvdl@NetBSD.org Joel Lindholm joel@NetBSD.org Mike Long mikel@NetBSD.org Michael Lorenz macallan@NetBSD.org Warner Losh imp@NetBSD.org Tomasz Luchowski zuntum@NetBSD.org Federico Lupi federico@NetBSD.org Brett Lymn blymn@NetBSD.org Paul Mackerras paulus@NetBSD.org Anders Magnusson ragge@NetBSD.org MAEKAWA Masahide gehenna@NetBSD.org David Maxwell david@NetBSD.org Dan McMahill dmcmahill@NetBSD.org Gregory McGarry gmcgarry@NetBSD.org Jared D. McNeill jmcneill@NetBSD.org Neil J. McRae neil@NetBSD.org Perry Metzger perry@NetBSD.org Simas Mockevicius symka@NetBSD.org Juan Romero Pardines xtraeme@NetBSD.org Julio M. Merino Vidal jmmv@NetBSD.org Minoura Makoto minoura@NetBSD.org Luke Mewburn lukem@NetBSD.org der Mouse mouse@NetBSD.org Joseph Myers jsm@NetBSD.org Ken Nakata kenn@NetBSD.org Takeshi Nakayama nakayama@NetBSD.org Phil Nelson phil@NetBSD.org John Nemeth jnemeth@NetBSD.org Bob Nestor rnestor@NetBSD.org NISHIMURA Takeshi nsmrtks@NetBSD.org Tohru Nishimura nisimura@NetBSD.org NONAKA Kimihiro nonaka@NetBSD.org Takehiko NOZAKI tnozaki@NetBSD.org Jesse Off joff@NetBSD.org Tatoku Ogaito tacha@NetBSD.org OKANO Takayoshi kano@NetBSD.org Masaru Oki oki@NetBSD.org Atsushi Onoe onoe@NetBSD.org Greg Oster oster@NetBSD.org Jonathan Perkin sketch@NetBSD.org Herb Peyerl hpeyerl@NetBSD.org Matthias Pfaller matthias@NetBSD.org Chris Pinnock cjep@NetBSD.org Adrian Portelli adrianp@NetBSD.org Rui Paulo rpaulo@NetBSD.org Peter Postma peter@NetBSD.org Dante Profeta dante@NetBSD.org Chris Provenzano proven@NetBSD.org Niels Provos provos@NetBSD.org Michael Rauch mrauch@NetBSD.org Marc Recht recht@NetBSD.org Darren Reed darrenr@NetBSD.org Jeremy C. Reed reed@NetBSD.org Antoine Reilles tonio@NetBSD.org Tyler R. Retzlaff rtr@NetBSD.org Scott Reynolds scottr@NetBSD.org Michael Richardson mcr@NetBSD.org Tim Rightnour garbled@NetBSD.org Jeff Rizzo riz@NetBSD.org Gordon Ross gwr@NetBSD.org Steve Rumble rumble@NetBSD.org Ilpo Ruotsalainen lonewolf@NetBSD.org Heiko W. Rupp hwr@NetBSD.org David Sainty dsainty@NetBSD.org SAITOH Masanobu msaitoh@NetBSD.org Kazuki Sakamoto sakamoto@NetBSD.org Curt Sampson cjs@NetBSD.org Wilfredo Sanchez wsanchez@NetBSD.org Ty Sarna tsarna@NetBSD.org SATO Kazumi sato@NetBSD.org Jan Schaumann jschauma@NetBSD.org Matthias Scheler tron@NetBSD.org Karl Schilke (rAT) rat@NetBSD.org Amitai Schlair schmonz@NetBSD.org Konrad Schroder perseant@NetBSD.org Georg Schwarz schwarz@NetBSD.org Lubomir Sedlacik salo@NetBSD.org Christopher SEKIYA sekiya@NetBSD.org Reed Shadgett dent@NetBSD.org John Shannon shannonjr@NetBSD.org Tim Shepard shep@NetBSD.org Takeshi Shibagaki shiba@NetBSD.org Naoto Shimazaki igy@NetBSD.org Takao Shinohara shin@NetBSD.org Takuya SHIOZAKI tshiozak@NetBSD.org Chuck Silvers chs@NetBSD.org Thor Lancelot Simon tls@NetBSD.org Jeff Smith jeffs@NetBSD.org Noriyuki Soda soda@NetBSD.org Wolfgang Solfrank ws@NetBSD.org SOMEYA Yoshihiko someya@NetBSD.org Bill Sommerfeld sommerfeld@NetBSD.org Jorg Sonnenberger joerg@NetBSD.org Ignatios Souvatzis is@NetBSD.org Bill Squier groo@NetBSD.org Jonathan Stone jonathan@NetBSD.org Bill Studenmund wrstuden@NetBSD.org Kevin Sullivan sullivan@NetBSD.org SUNAGAWA Keiki kei@NetBSD.org Kimmo Suominen kim@NetBSD.org Shin Takemura takemura@NetBSD.org TAMURA Kent kent@NetBSD.org Shin'ichiro TAYA taya@NetBSD.org Ian Lance Taylor ian@NetBSD.org Matt Thomas matt@NetBSD.org Jason Thorpe thorpej@NetBSD.org Christoph Toshok toshok@NetBSD.org Greg Troxel gdt@NetBSD.org Tsubai Masanari tsubai@NetBSD.org Izumi Tsutsui tsutsui@NetBSD.org UCHIYAMA Yasushi uch@NetBSD.org Masao Uebayashi uebayasi@NetBSD.org Shuichiro URATA ur@NetBSD.org Todd Vierling tv@NetBSD.org Aymeric Vincent aymeric@NetBSD.org Paul Vixie vixie@NetBSD.org Mike M. Volokhov mishka@NetBSD.org Krister Walfridsson kristerw@NetBSD.org Lex Wennmacher wennmach@NetBSD.org Leo Weppelman leo@NetBSD.org Assar Westerlund assar@NetBSD.org Todd Whitesel toddpw@NetBSD.org Nathan Williams nathanw@NetBSD.org Rob Windsor windsor@NetBSD.org Dan Winship danw@NetBSD.org Jim Wise jwise@NetBSD.org Michael Wolfson mbw@NetBSD.org Steve Woodford scw@NetBSD.org Colin Wood ender@NetBSD.org YAMAMOTO Takashi yamt@NetBSD.org Yuji Yamano yyamano@NetBSD.org Reinoud Zandijk reinoud@NetBSD.org S.P.Zeidler spz@NetBSD.org Maria Zevenhoven maria7@NetBSD.org Christos Zoulas christos@NetBSD.org Other contributors: Dave Burgess burgess@cynjut.infonet.net Brian R. Gaeke brg@dgate.org Brad Grantham grantham@tenon.com Lawrence Kesteloot kesteloo@cs.unc.edu Waldi Ravens waldi@moacs.indiv.nl.net Legal Mumbo-Jumbo All product names mentioned herein are trademarks or registered trademarks of their respective owners. The following notices are required to satisfy the license terms of the software that we have mentioned in this document: This product includes software developed by the University of California, Berkeley and its contributors. This product includes software developed by the NetBSD Founda- tion. This product includes software developed by The NetBSD Founda- tion, Inc. and its contributors. This product includes software developed for the NetBSD Project. See http://www.netbsd.org/ for information about NetBSD. This product contains software developed by Ignatios Souvatzis for the NetBSD project. This product contains software written by Ignatios Souvatzis and Michael L. Hitch for the NetBSD project. This product contains software written by Michael L. Hitch for the NetBSD project. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com) This product includes cryptographic software written by Eric Young (eay@mincom.oz.au) This product includes software designed by William Allen Simp- son. This product includes software developed at Ludd, University of Lulea, Sweden and its contributors. This product includes software developed at Ludd, University of Lulea. This product includes software developed at the Information Technology Division, US Naval Research Laboratory. This product includes software developed by Berkeley Software Design, Inc. This product includes software developed by David Jones and Gordon Ross This product includes software developed by Gordon W. Ross and Leo Weppelman. This product includes software developed by Hellmuth Michaelis and Joerg Wunsch This product includes software developed by Internet Research Institute, Inc. This product includes software developed by Leo Weppelman and Waldi Ravens. This product includes software developed by Mika Kortelainen This product includes software developed by Aaron Brown and Harvard University. This product includes software developed by Adam Ciarcinski for the NetBSD project. This product includes software developed by Adam Glass and Charles M. Hannum. This product includes software developed by Adam Glass. This product includes software developed by Advanced Risc Machines Ltd. This product includes software developed by Alex Zepeda, and Colin Wood for the NetBSD Projet. This product includes software developed by Alex Zepeda. This product includes software developed by Alistair G. Crooks. This product includes software developed by Alistair G. Crooks. for the NetBSD project. This product includes software developed by Allen Briggs This product includes software developed by Amancio Hasty and Roger Hardiman This product includes software developed by Berkeley Software Design, Inc. This product includes software developed by Berkeley Software Design, Inc. This product includes software developed by Bill Paul. This product includes software developed by Bodo Moeller. (If available, substitute umlauted o for oe) This product includes software developed by Boris Popov. This product includes software developed by Brad Pepers This product includes software developed by Bradley A. Grantham. This product includes software developed by Brini. This product includes software developed by Causality Limited. This product includes software developed by Charles D. Cranor and Seth Widoff. This product includes software developed by Charles D. Cranor and Washington University. This product includes software developed by Charles D. Cranor, Washington University, and the University of California, Berke- ley and its contributors. This product includes software developed by Charles D. Cranor, Washington University, the University of California, Berkeley and its contributors. This product includes software developed by Charles D. Cranor. This product includes software developed by Charles Hannum. This product includes software developed by Charles M. Hannum, by the University of Vermont and State Agricultural College and Garrett A. Wollman, by William F. Jolitz, and by the Univer- sity of California, Berkeley, Lawrence Berkeley Laboratory, and its contributors. This product includes software developed by Charles M. Hannum. This product includes software developed by Christian E. Hopps, Ezra Story, Kari Mettinen, Markus Wild, Lutz Vieweg and Michael Teske. This product includes software developed by Christian E. Hopps. This product includes software developed by Christian Limpach This product includes software developed by Christopher G. Demetriou for the NetBSD Project. This product includes software developed by Christopher G. Demetriou. This product includes software developed by Christos Zoulas. This product includes software developed by Chuck Silvers. This product includes software developed by Colin Wood for the NetBSD Project. This product includes software developed by Colin Wood. This product includes software developed by Cybernet Corpora- tion and Nan Yang Computer Services Limited This product includes software developed by Daishi Kato This product includes software developed by Dale Rahn. This product includes software developed by Daniel Widenfalk and Michael L. Hitch. This product includes software developed by Daniel Widenfalk for the NetBSD Project. This product includes software developed by Darrin B. Jewell This product includes software developed by David Miller. This product includes software developed by Dean Huxley. This product includes software developed by Eduardo Horvath. This product includes software developed by Eric S. Hvozda. This product includes software developed by Eric S. Raymond This product includes software developed by Eric Young (eay@@mincom.oz.au) This product includes software developed by Eric Young (eay@cryptsoft.com) This product includes software developed by Eric Young (eay@mincom.oz.au) This product includes software developed by Ezra Story and by Kari Mettinen. This product includes software developed by Ezra Story, by Kari Mettinen and by Bernd Ernesti. This product includes software developed by Ezra Story, by Kari Mettinen, Michael Teske and by Bernd Ernesti. This product includes software developed by Ezra Story, by Kari Mettinen, and Michael Teske. This product includes software developed by Ezra Story. This product includes software developed by Frank van der Lin- den for the NetBSD Project. This product includes software developed by Gardner Buchanan. This product includes software developed by Gary Thomas. This product includes software developed by Gordon Ross This product includes software developed by Gordon W. Ross This product includes software developed by HAYAKAWA Koichi. This product includes software developed by Harvard University and its contributors. This product includes software developed by Harvard University. This product includes software developed by Herb Peyerl. This product includes software developed by Hubert Feyrer for the NetBSD Project. This product includes software developed by Iain Hibbert This product includes software developed by Ian F. Darwin and others. This product includes software developed by Ian W. Dall. This product includes software developed by Ichiro FUKUHARA. This product includes software developed by Ignatios Souvatzis for the NetBSD Project. This product includes software developed by Internet Initiative Japan Inc. This product includes software developed by James R. Maynard III. This product includes software developed by Jared D. McNeill. This product includes software developed by Jason L. Wright This product includes software developed by Jason R. Thorpe for And Communications, http://www.and.com/ This product includes software developed by Joachim Koenig- Baltes. This product includes software developed by Jochen Pohl for The NetBSD Project. This product includes software developed by Joerg Wunsch This product includes software developed by John Birrell. This product includes software developed by John P. Wittkoski. This product includes software developed by John Polstra. This product includes software developed by Jonathan R. Stone for the NetBSD Project. This product includes software developed by Jonathan Stone and Jason R. Thorpe for the NetBSD Project. This product includes software developed by Jonathan Stone. This product includes software developed by Jukka Marin. This product includes software developed by Julian Highfield. This product includes software developed by Kazuhisa Shimizu. This product includes software developed by Kazuki Sakamoto. This product includes software developed by Kenneth Stailey. This product includes software developed by Kiyoshi Ikehara. This product includes software developed by Klaus Burkert,by Bernd Ernesti, by Michael van Elst, and by the University of California, Berkeley and its contributors. This product includes software developed by LAN Media Corpora- tion and its contributors. This product includes software developed by Leo Weppelman for the NetBSD Project. This product includes software developed by Leo Weppelman. This product includes software developed by Lloyd Parkes. This product includes software developed by Luke Mewburn. This product includes software developed by Lutz Vieweg. This product includes software developed by MINOURA Makoto, Takuya Harakawa. This product includes software developed by Manuel Bouyer. This product includes software developed by Marc Horowitz. This product includes software developed by Marcus Comstedt. This product includes software developed by Mark Brinicombe for the NetBSD project. This product includes software developed by Mark Brinicombe. This product includes software developed by Mark Murray This product includes software developed by Mark Tinguely and Jim Lowe This product includes software developed by Markus Wild. This product includes software developed by Martin Husemann and Wolfgang Solfrank. This product includes software developed by Masanobu Saitoh. This product includes software developed by Masaru Oki. This product includes software developed by Mats O Jansson and Charles D. Cranor. This product includes software developed by Mats O Jansson. This product includes software developed by Matt DeBergalis This product includes software developed by Matthew Fredette. This product includes software developed by Matthias Pfaller. This product includes software developed by Michael Graff for the NetBSD Project. This product includes software developed by Michael Graff. This product includes software developed by Michael L. Hitch. This product includes software developed by Michael Shalayeff. This product includes software developed by Michael Smith. This product includes software developed by Mike Glover and contributors. This product includes software developed by Mike Pritchard. This product includes software developed by Minoura Makoto. This product includes software developed by Nan Yang Computer Services Limited. This product includes software developed by Niels Provos. This product includes software developed by Niklas Hallqvist, Brandon Creighton and Job de Haas. This product includes software developed by Niklas Hallqvist. This product includes software developed by Onno van der Lin- den. This product includes software developed by Paul Kranenburg. This product includes software developed by Paul Mackerras. This product includes software developed by Per Fogelstrom This product includes software developed by Peter Galbavy. This product includes software developed by Phase One, Inc. This product includes software developed by Philip A. Nelson. This product includes software developed by Philip L. Budne. This product includes software developed by RiscBSD. This product includes software developed by Roar Thronaes. This product includes software developed by Rodney W. Grimes. This product includes software developed by Roger Hardiman This product includes software developed by Roland C. Dowdeswell. This product includes software developed by Rolf Grossmann. This product includes software developed by Ross Harvey for the NetBSD Project. This product includes software developed by Ross Harvey. This product includes software developed by Scott Bartram. This product includes software developed by Scott Stevens. This product includes software developed by Shingo WATANABE. This product includes software developed by Softweyr LLC, the University of California, Berkeley, and its contributors. This product includes software developed by Soren S. Jorvang. This product includes software developed by Stephan Thesing. This product includes software developed by Steve Woodford. This product includes software developed by Takashi Hamada This product includes software developed by Takumi Nakamura. This product includes software developed by Tatoku Ogaito for the NetBSD Project. This product includes software developed by Terrence R. Lam- bert. This product includes software developed by Tetsuya Isaki. This product includes software developed by Thomas Gerner This product includes software developed by Thomas Klausner for the NetBSD Project. This product includes software developed by Tobias Weingartner. This product includes software developed by Todd C. Miller. This product includes software developed by Tohru Nishimura and Reinoud Zandijk for the NetBSD Project. This product includes software developed by Tohru Nishimura for the NetBSD Project. This product includes software developed by Tohru Nishimura. for the NetBSD Project. This product includes software developed by TooLs GmbH. This product includes software developed by Toru Nishimura. This product includes software developed by Trimble Navigation, Ltd. This product includes software developed by WIDE Project and its contributors. This product includes software developed by Waldi Ravens. This product includes software developed by Wasabi Systems for Zembu Labs, Inc. http://www.zembu.com/ This product includes software developed by Winning Strategies, Inc. This product includes software developed by Wolfgang Solfrank. This product includes software developed by Yasushi Yamasaki This product includes software developed by Zembu Labs, Inc. This product includes software developed by the Alice Group. This product includes software developed by the Center for Software Science at the University of Utah. This product includes software developed by the Charles D. Cra- nor, Washington University, University of California, Berkeley and its contributors. This product includes software developed by the Computer Sys- tems Engineering Group at Lawrence Berkeley Laboratory. This product includes software developed by the David Muir Sharnoff. This product includes software developed by the Harvard Univer- sity and its contributors. This product includes software developed by the Kungliga Tekniska Hogskolan and its contributors. This product includes software developed by the Network Research Group at Lawrence Berkeley Laboratory. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/) his product includes software developed by the PocketBSD project and its contributors. This product includes software developed by the RiscBSD kernel team This product includes software developed by the RiscBSD team. This product includes software developed by the SMCC Technology Development Group at Sun Microsystems, Inc. This product includes software developed by the University of California, Berkeley and its contributors, as well as the Trustees of Columbia University. This product includes software developed by the University of California, Lawrence Berkeley Laboratory and its contributors. This product includes software developed by the University of California, Lawrence Berkeley Laboratory. This product includes software developed by the University of Illinois at Urbana and their contributors. This product includes software developed by the University of Vermont and State Agricultural College and Garrett A. Wollman. This product includes software developed by the University of Vermont and State Agricultural College and Garrett A. Wollman, by William F. Jolitz, and by the University of California, Berkeley, Lawrence Berkeley Laboratory, and its contributors. This product includes software developed for the FreeBSD project This product includes software developed for the NetBSD Project by Bernd Ernesti. This product includes software developed for the NetBSD Project by Christopher G. Demetriou. This product includes software developed for the NetBSD Project by Christos Zoulas This product includes software developed for the NetBSD Project by Emmanuel Dreyfus. This product includes software developed for the NetBSD Project by Frank van der Linden This product includes software developed for the NetBSD Project by Ignatios Souvatzis. This product includes software developed for the NetBSD Project by Jason R. Thorpe. This product includes software developed for the NetBSD Project by John M. Vinopal. This product includes software developed for the NetBSD Project by Matthias Drochner. This product includes software developed for the NetBSD Project by Michael L. Hitch. This product includes software developed for the NetBSD Project by Perry E. Metzger. This product includes software developed for the NetBSD Project by Scott Bartram and Frank van der Linden This product includes software developed for the NetBSD Project by Allegro Networks, Inc., and Wasabi Systems, Inc. This product includes software developed for the NetBSD Project by Genetec Corporation. This product includes software developed for the NetBSD Project by Jonathan Stone. This product includes software developed for the NetBSD Project by Piermont Information Systems Inc. This product includes software developed for the NetBSD Project by SUNET, Swedish University Computer Network. This product includes software developed for the NetBSD Project by Shigeyuki Fukushima. This product includes software developed for the NetBSD Project by Wasabi Systems, Inc. This product includes software developed under OpenBSD by Per Fogelstrom Opsycon AB for RTMX Inc, North Carolina, USA. This product includes software developed under OpenBSD by Per Fogelstrom. This software is a component of "386BSD" developed by William F. Jolitz, TeleMuse. This software was developed by Holger Veit and Brian Moore for use with "386BSD" and similar operating systems. "Similar operating systems" includes mainly non-profit oriented systems for research and education, including but not restricted to "NetBSD", "FreeBSD", "Mach" (by CMU). This software includes software developed by the Computer Sys- tems Laboratory at the University of Utah. This product includes software developed by Computing Services at Carnegie Mellon University (http://www.cmu.edu/computing/). This product includes software developed by the Alice Group. This product includes software developed by Allen Briggs. This product includes software developed by Bradley A. Grantham. This product includes softwarre developed by Daishi Kato. This product includes software developed by Takashi Hamada. This product includes software developed by Scott Reynolds. This product includes software developed by John P. Wittkoski. This product includes software developed by Colin Wood. The End Contributions The following people have made contributions of various sorts specifically for the Macintosh port (in alphabetical order): o All of the users who have supplied us with good bug reports and moral support. o The Alice Group (Allen K. Briggs, Chris P. Caputo, Michael L. Finch, Bradley A. Grantham, and Lawrence A. Kesteloot), without whom there would be no NetBSD port for the Macin- tosh. o Steven R. Allen for keeping our snapshot distributions up- to-date. o Stephen C. Brown for maintaining the Installer application. o Denton Gentry and Yanagisawa Takeshi for their work on the SONIC Ethernet driver. o Paul Goyette, Taras Ivanenko, Ken Nakata, and Michael R. Zucca for invaluable work towards supporting color X. o Takashi Hamada and John Wittkoski beating the direct ADB hardware driver into submission. o David Huang for getting MACE Ethernet and basic DMA working on the AV Macs. o Scott Jann for acquiring a IIx and a IIci, used for build- ing and testing release sets. o Scott Kaplan for lending his IIci and Kensington Turbo Mouse for IIci/IIsi banked memory and internal video as well as non-Apple ADB devices. o Noah M. Kieserman for lending a PowerBook 520C for tracking down several bugs on that platform. o Markus Krummenacker for monetary donations. o Glan Lalonde for an invaluable IIci page table dump. o Dan McMahill for lending a PowerBook 165 to tweak ADB sup- port on the PowerBook 160 and 180 family laptops. o Bob Nestor for (unofficially) maintaining the Mkfs utility, and providing a lot of useful information about the ROM vectors used by different systems. o Brad Parker for serial and Ethernet drivers/improvements. o Brian R. Gaeke and Nigel Pearson for tweaking, polishing, and performing the occasional major refit on the Booter application. o Scott Redman for lending Brad Grantham a PowerBook 160. o Craig Ruff for assembling an '030 pmove ttx instruction. o Brad Salai for lending an Ethernet card to help resolve interrupt conflicts. o Larry Samuels for monetary donations. o Peter Siebold for lending his IIvx in support of ADB and IIvx internal video. o Glen Stewart for lending a Carrera040 accelerator which, while still unsupported, helped to track down memory man- agement bugs for '030-based machines. o Bill Studenmund for providing a stable front end to the machine- independent serial driver. o Schuyler Stultz for the loan of his Macintosh II when we desperately needed another machine on which to compile and test during the '93 Xmas vacation. o Tenon Intersystems for monetary donations, MachTen, and Brad's access to several machines and documentation after hours. o Virginia Tech English Department for loan of a IIci w/ NuBus video and 32 MB of RAM -- the first IIci to run NetBSD/mac68k. o Rob Windsor for donating a variety of Macintosh II-family systems, a Centris 650, a Quadra 700, and several boxes full of miscellaneous peripherals and parts in the interest of ensuring adequate testing and working out minor (and not-so-minor) problems. o Colin Wood for maintaining a host of NetBSD/mac68k documen- tation, including the FAQ, Meta-FAQ, and OS Info documents. NetBSD August 22, 2004 NetBSD