INSTALL(8) NetBSD System Manager's Manual INSTALL(8) NAME INSTALL -- Installation procedure for NetBSD/evbarm. CONTENTS About this Document............................................2 What is NetBSD?................................................3 Changes Between The NetBSD 6.0.5 and 6.0.6 Releases............3 Security Advisory Fixes.....................................3 Other Security Fixes........................................4 Kernel......................................................4 Miscellaneous...............................................4 alpha.......................................................4 sparc64.....................................................4 next68k.....................................................4 The NetBSD Foundation..........................................4 Sources of NetBSD..............................................5 NetBSD 6.0.6 Release Contents..................................5 NetBSD/evbarm subdirectory structure........................6 Binary distribution sets....................................6 NetBSD/evbarm System Requirements and Supported Devices........8 Supported devices (Technologic Systems TS-7200).............8 TS-5620 Real Time Clock..................................8 Serial ports.............................................8 Ethernet adapters........................................8 Other on-board functions.................................8 Supported devices (ARM, Ltd. Integrator)....................8 PrimeCell PL030 Real Time Clock..........................8 Serial ports.............................................8 SCSI host adapters.......................................8 Ethernet adapters........................................9 Supported devices (Intel IQ80310)...........................9 Serial ports.............................................9 Ethernet adapters........................................9 i80312 Companion I/O functions...........................9 Supported devices (Intel IQ80321)...........................9 Serial ports.............................................9 Ethernet adapters........................................9 i80321 I/O Processor functions...........................9 Supported devices (Team ASA Npwr)...........................9 Serial ports.............................................9 SCSI host adapters.......................................9 Ethernet adapters........................................9 Supported devices (Intel IXM1200)...........................9 Serial ports.............................................9 Ethernet adapters........................................9 Supported devices (Samsung SMDK2800)........................9 Serial ports............................................10 Supported devices (ADI BRH)................................10 Serial ports............................................10 Ethernet adapters.......................................10 Supported devices (Arcom Viper)............................10 Serial ports............................................10 Ethernet adapters.......................................10 Getting the NetBSD System on to Useful Media..................10 Preparing your System for NetBSD installation.................11 Preparation for the Technologic Systems TS-7200............11 Preparation for the Intel IQ80310..........................12 Preparation for the Intel IQ80321..........................14 Installing the NetBSD System..................................16 Installation for the Technologic Systems TS-7200...........16 Installation for the Intel IQ80310.........................17 Installation for the Intel IQ80321.........................18 Post installation steps.......................................19 Upgrading a previously-installed NetBSD System................21 Compatibility Issues With Previous NetBSD Releases............22 Issues affecting an upgrade from NetBSD 5.x releases.......22 Issues affecting an upgrade from NetBSD 4.x releases.......23 Using online NetBSD documentation.............................23 Administrivia.................................................24 Thanks go to..................................................24 We are........................................................25 Legal Mumbo-Jumbo.............................................31 The End.......................................................36 DESCRIPTION About this Document This document describes the installation procedure for NetBSD 6.0.6 on the evbarm platform. It is available in four different formats titled INSTALL.ext, where .ext is one of .ps, .html, .more, or .txt: .ps PostScript. .html Standard Internet HTML. .more The enhanced text format used on UNIX-like systems by the more(1) and less(1) pager utility programs. This is the format in which the on-line man pages are generally pre- sented. .txt Plain old ASCII. You are reading the ASCII version. What is NetBSD? The NetBSD Operating System is a fully functional Open Source UNIX-like operating system derived from the University of California, Berkeley Net- working Release 2 (Net/2), 4.4BSD-Lite, and 4.4BSD-Lite2 sources. NetBSD runs on 57 different system architectures (ports) across 15 distinct CPU families, and is being ported to more. The NetBSD 6.0.6 release contains complete binary releases for many different system architectures. (A few ports are not fully supported at this time and are thus not part of the binary distribution. Please see the NetBSD web site at http://www.NetBSD.org/ for information on them.) NetBSD is a completely integrated system. In addition to its highly por- table, high performance kernel, NetBSD features a complete set of user utilities, compilers for several languages, the X Window System, firewall software and numerous other tools, all accompanied by full source code. NetBSD is a creation of the members of the Internet community. Without the unique cooperation and coordination the net makes possible, it's likely that NetBSD wouldn't exist. Changes Between The NetBSD 6.0.5 and 6.0.6 Releases NetBSD 6.0.6 is the sixth critical/security update of the NetBSD 6.0 release branch. It represents a selected subset of fixes deemed critical for security or stability reasons. The complete list of changes can be found in the CHANGES-6.0.6: http://ftp.NetBSD.org/pub/NetBSD/NetBSD-6.0.6/CHANGES-6.0.6 file in the top level directory of the NetBSD 6.0.6 release tree. An abbreviated list is as follows: Security Advisory Fixes o NetBSD-SA2014-005: http://ftp.netbsd.org/pub/NetBSD/security/advisories/NetBSD-SA2014-005.txt.asc libXfont multiple vulnerabilities o NetBSD-SA2014-006: http://ftp.netbsd.org/pub/NetBSD/security/advisories/NetBSD-SA2014-006.txt.asc Multiple OpenSSL vulnerabilities o NetBSD-SA2014-007: http://ftp.netbsd.org/pub/NetBSD/security/advisories/NetBSD-SA2014-007.txt.asc bozohttpd basic http authentication bypass o NetBSD-SA2014-008: http://ftp.netbsd.org/pub/NetBSD/security/advisories/NetBSD-SA2014-008.txt.asc Multiple OpenSSL vulnerabilities o NetBSD-SA2014-009: http://ftp.netbsd.org/pub/NetBSD/security/advisories/NetBSD-SA2014-009.txt.asc Multiple vulnerabilities in the execve system call o NetBSD-SA2014-010: http://ftp.netbsd.org/pub/NetBSD/security/advisories/NetBSD-SA2014-010.txt.asc Multiple vulnerabilities in the compatibility layers o NetBSD-SA2014-011: http://ftp.netbsd.org/pub/NetBSD/security/advisories/NetBSD-SA2014-011.txt.asc User-controlled memory allocation in the modctl system call o NetBSD-SA2014-012: http://ftp.netbsd.org/pub/NetBSD/security/advisories/NetBSD-SA2014-012.txt.asc Memory leak in the setsockopt system call Advisories prior to NetBSD-SA2014-005 do not affect NetBSD 6.0.6: .: http://www.NetBSD.org/support/security/patches-6.0.6.html Other Security Fixes o Fix various issues in the mount syscall, which could be used by a local user to panic the system. o OpenPAM: Fix incorrect error handling in PAM policy parser. CVE-2014-3879. Kernel o wm(4): Bump max TX DMA size to avoid pathological condition with TSO. o tap(4): Fix a race. PR kern/47506 and kern/46199. o urndis(4): Fix a panic. o vioif(4): Fix a panic. PR kern/49007. o Fix a mbuf leak in IPFilter. o Fix two overflows and a memory corruption bug in ptyfs and umapfs. o Reject unaligned PCI config register ioctl requests before we kassert. Miscellaneous o heimdal: Fix file descriptor leak. Fixes PR lib/48718 o Update to tzdata2014g. o Update bozohttpd to 20140708. o Update openssl to 1.0.1i. o Fix Xserver crash on exit (causing screen palette settings to not be restored) when using wsfb. o postinstall(8): Don't apply "ptyfsoldnodes" if /dev/pts does not exist. o named: Update root.cache to 2014060201. alpha o Make sysinst deal correctly with Tru64 disklabels. PR port- alpha/48697. sparc64 o Fix longjmp bug which causes a segmentation fault on sparc64 kernels with 32-bit userland. next68k o Move physmem calculations before nptpage initialization. PR port- m68k/45915. The NetBSD Foundation The NetBSD Foundation is a tax exempt, not-for-profit 501(c)(3) corpora- tion that devotes itself to the traditional goals and Spirit of the NetBSD Project and owns the trademark of the word ``NetBSD''. It sup- ports the design, development, and adoption of NetBSD worldwide. More information on the NetBSD Foundation, its composition, aims, and work can be found at: http://www.NetBSD.org/foundation/ Sources of NetBSD Refer to http://www.NetBSD.org/mirrors/ NetBSD 6.0.6 Release Contents The root directory of the NetBSD 6.0.6 release is organized as follows: .../NetBSD-6.0.6/ CHANGES Changes between the 5.0 and 6.0 releases. CHANGES-6.0 Changes between the initial 6.0 branch and final release of 6.0. CHANGES-6.0.1 Changes between the 6.0 and 6.0.1 releases. CHANGES-6.0.2 Changes between the 6.0.1 and 6.0.2 releases. CHANGES-6.0.3 Changes between the 6.0.2 and 6.0.3 releases. CHANGES-6.0.4 Changes between the 6.0.3 and 6.0.4 releases. CHANGES-6.0.5 Changes between the 6.0.4 and 6.0.5 releases. CHANGES-6.0.6 Changes between the 6.0.5 and 6.0.6 releases. CHANGES.prev Changes in previous NetBSD releases. LAST_MINUTE Last minute changes and notes about the release. README.files README describing the distribution's contents. source/ Source distribution sets; see below. In addition to the files and directories listed above, there is one directory per architecture, for each of the architectures for which NetBSD 6.0.6 has a binary distribution. The source distribution sets can be found in subdirectories of the source subdirectory of the distribution tree. They contain the complete sources to the system. The source distribution sets are as follows: gnusrc This set contains the ``gnu'' sources, including the source for the compiler, assembler, groff, and the other GNU utilities in the binary distribution sets. sharesrc This set contains the ``share'' sources, which include the sources for the man pages not associated with any particular program; the sources for the typesettable document set; the dictionaries; and more. src This set contains all of the base NetBSD 6.0.6 sources which are not in gnusrc, sharesrc, or syssrc. syssrc This set contains the sources to the NetBSD 6.0.6 kernel for all architectures as well as the config(1) utility. xsrc This set contains the sources to the X Window System. All the above source sets are located in the source/sets subdirectory of the distribution tree. The source sets are distributed as compressed tar files. Except for the pkgsrc set, which is traditionally unpacked into /usr/pkgsrc, all sets may be unpacked into /usr/src with the command: # cd / ; tar -zxpf set_name.tgz In each of the source distribution set directories, there are files which contain the checksums of the files in the directory: MD5 MD5 digests in the format produced by the command: cksum -a MD5 file. SHA512 SHA512 digests in the format produced by the command: cksum -a SHA512 file. The SHA512 digest is safer, but MD5 checksums are provided so that a wider range of operating systems can check the integrity of the release files. NetBSD/evbarm subdirectory structure The evbarm-specific portion of the NetBSD 6.0.6 release is found in the evbarm subdirectory of the distribution: .../NetBSD-6.0.6/evbarm/. It contains the following files and directories: INSTALL.html INSTALL.ps INSTALL.txt INSTALL.more Installation notes in various file formats, including this file. The .more file contains underlined text using the more(1) conventions for indicating italic and bold display. binary/ kernel/ netbsd-GENERIC.gz A gzipped NetBSD kernel containing code for everything supported in this release. sets/ evbarm binary distribution sets; see below. installation/ misc/ Miscellaneous evbarm installation utilities; see installation section below. Binary distribution sets The NetBSD evbarm binary distribution sets contain the binaries which comprise the NetBSD 6.0.6 release for evbarm. The binary distribution sets can be found in the evbarm/binary/sets subdirectory of the NetBSD 6.0.6 distribution tree, and are as follows: base The NetBSD 6.0.6 evbarm base binary distribution. You must install this distribution set. It contains the base NetBSD utilities that are necessary for the system to run and be mini- mally functional. comp Things needed for compiling programs. This set includes the system include files (/usr/include) and the various system libraries (except the shared libraries, which are included as part of the base set). This set also includes the manual pages for all of the utilities it contains, as well as the system call and library manual pages. etc This distribution set contains the system configuration files that reside in /etc and in several other places. This set must be installed if you are installing the system from scratch, but should not be used if you are upgrading. games This set includes the games and their manual pages. kern-INTEGRATOR (see below) kern-IQ80310 (see below) kern-IQ80321 (see below) kern-TEAMASA_NPWR These sets contain a NetBSD/evbarm 6.0.6 kernel, named /netbsd. Some of these sets also contain a binary format kernel named /netbsd.bin and an S-record format kernel named /netbsd.srec that your firmware may need to boot. You must install the ker- nel that matches your hardware. man This set includes all of the manual pages for the binaries and other software contained in the base set. Note that it does not include any of the manual pages that are included in the other sets. misc This set includes the system dictionaries, the typesettable doc- ument set, and other files from /usr/share. text This set includes NetBSD's text processing tools, including groff(1), all related programs, and their manual pages. NetBSD maintains its own set of sources for the X Window System in order to assure tight integration and compatibility. These sources are based on X.Org. Binary sets for the X Window System are distributed with NetBSD. The sets are: xbase The basic files needed for a complete X client environment. This does not include the X servers. xcomp The extra libraries and include files needed to compile X source code. xfont Fonts needed by the X server and by X clients. xetc Configuration files for X which could be locally modified. xserver The X server. The evbarm binary distribution sets are distributed as gzipped tar files named with the extension .tgz, e.g. base.tgz. The instructions given for extracting the source sets work equally well for the binary sets, but it is worth noting that if you use that method, the filenames stored in the sets are relative and therefore the files are extracted below the current directory. Therefore, if you want to extract the binaries into your system, i.e. replace the system binaries with them, you have to run the tar -xzpf command from the root directory ( / ) of your system. Note: Each directory in the evbarm binary distribution also has its own checksum files, just as the source distribution does. NetBSD/evbarm System Requirements and Supported Devices NetBSD 6.0.6 runs on the following ARM architecture evaluation boards: o Technologic Systems TS-7200 o ARM, Ltd. Integrator o Intel IQ80310 o Intel IQ80321 o Team ASA, Inc. Npwr o Intel IXM1200 o Samsung SMDK2800 o ADI Engineering, Inc. BRH ("Big Red Head") o Arcom Viper Supported devices (Technologic Systems TS-7200) For devices that have machine-independent drivers, this is not an exhaus- tive list, but merely reflects the devices that have been tested on this platform. o TS-5620 Real Time Clock o Serial ports - On-chip EP9302 UARTs - TS-SER1, TS-SER2, TS-SER4 PC/104 serial adapters - TS-MODEM, TS-MODEM2 PC/104 land-line/cellular modems o Ethernet adapters - On-chip EP9302 10/100 ethernet - TS-ETH10 PC/104 expansion ethernet adapters o Other on-board functions - CompactFlash socket - USB OHCI host - Text-mode HD44780 LCD display header - Matrix keypad/GPIO header - Board temperature sensor and watchdog timer Supported devices (ARM, Ltd. Integrator) For devices that have machine-independent drivers, this is not an exhaus- tive list, but merely reflects the devices that have been tested on this platform. o PrimeCell PL030 Real Time Clock o Serial ports - PrimeCell PL010 UART o SCSI host adapters - Adaptec AHA-2910, 2915, 2920, and 2930C adapters. - Adaptec AHA-2x4x[U][2][W] cards and onboard PCI designs using the AIC-7770, AIC-7850, AIC-7860, AIC-7870, AIC-7880 and AIC-789x chipsets. - Adaptec AHA-394x[U][W] cards [b] - Adaptec AHA-3950U2 cards - Adaptec AHA-3960, 19160 and 29160 Ultra-160 adapters o Ethernet adapters - Intel i82557, i82558, i82559, i82550 Supported devices (Intel IQ80310) For devices that have machine-independent drivers, this is not an exhaus- tive list, but merely reflects the devices that have been tested on this platform. o Serial ports - On-board ST16c550 UARTs o Ethernet adapters - Intel i82557, i82558, i82559, i82550 o i80312 Companion I/O functions - General Purpose I/O unit Supported devices (Intel IQ80321) For devices that have machine-independent drivers, this is not an exhaus- tive list, but merely reflects the devices that have been tested on this platform. o Serial ports - On-board TI 16550 UART o Ethernet adapters - Intel i82542, i82543, i85244 Gigabit Ethernet o i80321 I/O Processor functions - Application Accelerator Unit - Watchdog timer Supported devices (Team ASA Npwr) The Npwr is a storage appliance based on the Intel IOP310 I/O processor chipset. This is an exhaustive list of devices supported on the Npwr as the Npwr has no expansion capability. o Serial ports - On-board TI 16550 UART o SCSI host adapters - On-board LSI Logic 53c1010 Ultra160 SCSI adapter o Ethernet adapters - On-board Intel i82544 Gigabit Ethernet Supported devices (Intel IXM1200) For devices that have machine-independent drivers, this is not an exhaus- tive list, but merely reflects the devices that have been tested on this platform. o Serial ports - IXP1200 on-chip serial port o Ethernet adapters - Intel i82557, i82558, i82559, i82550 Supported devices (Samsung SMDK2800) For devices that have machine-independent drivers, this is not an exhaus- tive list, but merely reflects the devices that have been tested on this platform. o Serial ports - S3C2800 on-chip serial ports Supported devices (ADI BRH) For devices that have machine-independent drivers, this is not an exhaus- tive list, but merely reflects the devices that have been tested on this platform. o Serial ports - On-board TI 16752 DUART o Ethernet adapters - Intel i82557, i82558, i82559, i82550 - Intel i82544, i82546 Gigabit Ethernet Supported devices (Arcom Viper) Current this is an exhaustive list, since expansion ports such as PC/104 and USB are not yet supported. o Serial ports - On-chip PXA255 UARTs Ethernet adapters - On-board SMC91C111 Getting the NetBSD System on to Useful Media Installation is supported from several media types, including: o CD-ROM / DVD o FTP o Remote NFS partition o Tape o Existing NetBSD partitions, if performing an upgrade The steps necessary to prepare the distribution sets for installation depend upon which installation medium you choose. The steps for the var- ious media are outlined below. CD-ROM / DVD Find out where the distribution set files are on the CD-ROM or DVD. Likely locations are binary/sets and evbarm/binary/sets. Proceed to the instructions on installation. FTP The preparations for this installation/upgrade method are easy; all you need to do is make sure that there's an FTP site from which you can retrieve the NetBSD distribution when you're about to install or upgrade. If you don't have DHCP available on your network, you will need to know the numeric IP address of that site, and, if it's not on a net- work directly connected to the machine on which you're installing or upgrading NetBSD, you need to know the numeric IP address of the router closest to the NetBSD machine. Finally, you need to know the numeric IP address of the NetBSD machine itself. Once you have this information, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on pre- paring your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading. NFS Place the NetBSD distribution sets you wish to install into a directory on an NFS server, and make that directory mountable by the machine on which you are installing or upgrading NetBSD. This will probably require modifying the /etc/exports file on the NFS server and resetting its mount daemon (mountd). (Both of these actions will probably require superuser privileges on the server.) You need to know the numeric IP address of the NFS server, and, if you don't have DHCP available on your network and the server is not on a network directly connected to the machine on which you're installing or upgrading NetBSD, you need to know the numeric IP address of the router closest to the NetBSD machine. Finally, you need to know the numeric IP address of the NetBSD machine itself. Once the NFS server is set up properly and you have the information mentioned above, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on pre- paring your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading. Tape To install NetBSD from a tape, you need to make a tape that contains the distribution set files, in `tar' format. If you're making the tape on a UNIX-like system, the easi- est way to do so is probably something like: # tar -cf tape_device dist_directories where tape_device is the name of the tape device that describes the tape drive you're using; possibly /dev/rst0, or something similar, but it will vary from system to sys- tem. (If you can't figure it out, ask your system adminis- trator.) In the above example, dist_directories are the distribution sets' directories, for the distribution sets you wish to place on the tape. For instance, to put the kern-GENERIC, base, and etc distributions on tape (in order to do the absolute minimum installation to a new disk), you would do the following: # cd .../NetBSD-6.0.6 # cd evbarm/binary # tar -cf tape_device kern-GENERIC base etc Note: You still need to fill in tape_device in the example. Once you have the files on the tape, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading. Preparing your System for NetBSD installation First and foremost, before beginning the installation process, make sure you have a reliable backup of any data on the target system that you wish to keep. Mistakes in partitioning may lead to data loss. Preparation for the Technologic Systems TS-7200 The TS-7200 uses RedBoot firmware which supports loading the kernel via serial port and the on-chip Ethernet. These notes assume that the Ether- net will be used to load the kernel. RedBoot can either use TFTP or HTTP to load the kernel via the network. These notes also assume the the TS-7200 will be run from the Compact- Flash; that a FFS filesystem on the CompactFlash card will provide the root file system. The minimum size of the CompactFlash card is 64MB with 512MB being the recommended minimum size if attempting a full installa- tion. The first step to install NetBSD is to interrupt normal system bootup and drop to the RedBoot prompt by hitting Ctrl-C immediately after applying power. To load both the installation kernel and the generic post-instal- lation TS7200 kernel you will need network connectivity from RedBoot which you will have to configure using the RedBoot fconfig command; see the RedBoot documentation for more information. A compressed kernel image and loader suitable for placing into flash is provided with the distribution. Use of this image is optional; a kernel that can be directly loaded over the network by RedBoot is also provided. The image for the TS-7200 can be found under the NetBSD/evbarm 6.0.6 dis- tribution directory in evbarm/binary/gzimg/gzimg_TS7200_flash_0x60660000.gz, and corresponds to the kernel in evbarm/binary/kernel/netbsd-TS7200.gz. The following steps describe how to copy the compressed kernel image into flash. 1. Uncompress the gzimg file and place it into the TFTP server's down- load area (note, the kernel inside the gzimg is still compressed after this step). server# gzcat gzimg_TS7200_flash_0x60660000.gz > /tftpboot/gzimg_TS7200_flash_0x60660000 2. Load the gzimg from the TFTP server. RedBoot> load -r -b 0x00200000 gzimg_TS7200_flash_0x60660000 Raw file loaded 0x00200000-0x00605fe0 3. Use the RedBoot fis command to copy the image into flash. For more information on the RedBoot Flash Image System, see the RedBoot docu- mentation. The factory default Linux image may already be present in flash and must be deleted before continuing. RedBoot> fis delete vmlinux RedBoot> fis create -b 0x00200000 -f 0x60660000 -l 0x00160000 netbsd.gz Once the compressed kernel image has been copied into flash, it may be started by jumping to the flash address of the image: RedBoot> g 0x60660000 Preparation for the Intel IQ80310 The IQ80310 uses RedBoot firmware from Red Hat, Inc. RedBoot supports loading the kernel via the serial port and the on-board Ethernet. These notes assume that the Ethernet will be used to load the kernel. RedBoot uses the Trivial File Transfer Protocol (TFTP) to load the kernel via the network. These notes also assume that the IQ80310 will be run as a diskless sys- tem; that an NFS server will provide the root file system. The NetBSD kernel uses the Dynamic Host Configuration Protocol (DHCP) to obtain net- work address and root file system information. The first step is to configure your DHCP, NFS, and TFTP server software. You will need the MAC address for the on-board Ethernet, which RedBoot can provide; see the RedBoot documentation for more information. The next step is to configure RedBoot to obtain its IP address from your DHCP server; see the RedBoot documentation for more information. Once your DHCP server and RedBoot are properly configured, you should see information similar to the following when the IQ80310 is reset or pow- ered-up: RedBoot(tm) debug environment - built 17:16:14, Feb 12 2001 Platform: IQ80310 (XScale) Copyright (C) 2000, Red Hat, Inc. RAM: 0xa0000000-0xa2000000 FLASH: 0x00000000 - 0x00800000, 64 blocks of 0x00020000 bytes each. IP: 192.168.0.10, Default server: 192.168.0.1 RedBoot> A compressed kernel image and loader suitable for placing into flash is provided with the distribution. Use of this image is optional; a kernel that can be directly loaded over the network by RedBoot is also provided. The image for the IQ80310 can be found under the NetBSD/evbarm 6.0.6 dis- tribution directory in evbarm/binary/gzimg/gzimg_IQ80310_flash_0x00080000.gz, and corresponds to the kernel in evbarm/binary/kernel/netbsd-IQ80310.gz. The following steps describe how to copy the compressed kernel image into flash. 1. Uncompress the gzimg file and place it into the TFTP server's down- load area (note, the kernel inside the gzimg is still compressed after this step). server# gzcat gzimg_IQ80310_flash_0x00080000.gz > /tftpboot/gzimg_IQ80310_flash_0x00080000 2. Load the gzimg from the TFTP server. RedBoot> load -r -b 0xa0200000 gzimg_IQ80310_flash_0x00080000 Raw file loaded 0xa0200000-0xa0305fe0 3. Use the RedBoot fis command to copy the image into flash. For more information on the RedBoot Flash Image System, see the RedBoot docu- mentation. RedBoot> fis create -b 0xa0200000 -f 0x00080000 -l 0x00200000 netbsd.gz ... Erase from 0x00080000-0x00280000: .................... ... Program from 0xa0200000-0xa0400000 at 0x00080000: .................... ... Unlock from 0x007e0000-0x00800000:. ... Erase from 0x007e0000-0x00800000:. ... Program from 0xa1fd0000-0xa1ff0000 at 0x007e0000:. ... Lock from 0x007e0000-0x00800000:. Once the compressed kernel image has been copied into flash, it may be started by jumping to the flash address of the image: RedBoot> g 0x00080000 >> NetBSD/IQ80310 Gzip Boot, Revision 1.1 >> (root@tgm, Thu Mar 28 18:32:45 PST 2002) >> RAM 0xa0000000 - 0xafffffff, heap at 0xaffd0000 >> Load address: 0xa0200000 >> Image size: 741244 Uncompressing image...done. Jumping to image @ 0xa0200000... NetBSD/evbarm (IQ80310) booting ... Resetting secondary PCI bus... initarm: Configuring system ... physmemory: 65536 pages at 0xa0000000 -> 0xafffffff init subsystems: stacks vectors undefined pmap irq done. [ using 155084 bytes of netbsd ELF symbol table ] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 1.5ZC (IQ80310) #20: Fri Mar 29 10:25:53 PST 2002 root@tgm:/u1/netbsd/src/sys/arch/evbarm/compile/IQ80310 total memory = 256 MB avail memory = 232 MB using 1228 buffers containing 13208 KB of memory mainbus0 (root) cpu0 at mainbus0: i80200 step A-0 (XScale core) cpu0: DC enabled IC enabled WB enabled LABT cpu0: 32KB/32B 32-way Instruction cache cpu0: 32KB/32B 32-way write-back-locking Data cache obio0 at mainbus0: board rev. F, CPLD rev. D, backplane present com0 at obio0 addr 0xfe810000: ns16550a, working fifo com0: console com1 at obio0 addr 0xfe800000: ns16550a, working fifo iopxs0 at mainbus0: i80312 Companion I/O, acting as PCI host iopxs0: configuring Secondary PCI bus pci0 at iopxs0 bus 1 pci0: i/o space, memory space enabled ppb0 at pci0 dev 7 function 0: Digital Equipment DECchip 21154 PCI-PCI Bridge (rev. 0x05) pci1 at ppb0 bus 2 pci1: i/o space, memory space enabled fxp0 at pci1 dev 0 function 0: i82559S Ethernet, rev 9 fxp0: interrupting at iq80310 irq 1 fxp0: Ethernet address 00:80:4d:46:0b:b9 inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto clock: hz=100 stathz=0 profhz=0 boot device: root device: Preparation for the Intel IQ80321 The IQ80321 uses RedBoot firmware from Red Hat, Inc. RedBoot supports loading the kernel via the serial port and the on-board Ethernet. These notes assume that the Ethernet will be used to load the kernel. RedBoot uses the Trivial File Transfer Protocol (TFTP) to load the kernel via the network. These notes also assume that the IQ80321 will be run as a diskless sys- tem; that an NFS server will provide the root file system. The NetBSD kernel uses the Dynamic Host Configuration Protocol (DHCP) to obtain net- work address and root file system information. The first step is to configure your DHCP, NFS, and TFTP server software. You will need the MAC address for the on-board Ethernet, which RedBoot can provide; see the RedBoot documentation for more information. The next step is to configure RedBoot to obtain its IP address from your DHCP server; see the RedBoot documentation for more information. Once your DHCP server and RedBoot are properly configured, you should see information similar to the following when the IQ80321 is reset or pow- ered-up: Ethernet eth0: MAC address 00:07:e9:03:38:40 IP: 192.168.0.11, Default server: 192.168.0.1 RedBoot(tm) bootstrap and debug environment [ROM] Non-certified release, version UNKNOWN - built 11:21:56, Feb 1 2002 Platform: IQ80321 (XScale) Copyright (C) 2000, 2001, 2002, Red Hat, Inc. RAM: 0x00000000-0x08000000, 0x00017008-0x01ddd000 available FLASH: 0xf0000000 - 0xf0800000, 64 blocks of 0x00020000 bytes each. RedBoot> A compressed kernel image and loader suitable for placing into flash is provided with the distribution. Use of this image is optional; a kernel that can be directly loaded over the network by RedBoot is also provided. The image for the IQ80321 can be found under the NetBSD/evbarm 6.0.6 dis- tribution directory in evbarm/binary/gzimg/gzimg_IQ80321_flash_0xf0080000.gz, and corresponds to the kernel in evbarm/binary/kernel/netbsd-IQ80321.gz. The following steps describe how to copy the compressed kernel image into flash. 1. Uncompress the gzimg file and place it into the TFTP server's down- load area (note, the kernel inside the gzimg is still compressed after this step). server# gzcat gzimg_IQ80321_flash_0xf0080000.gz > /tftpboot/gzimg_IQ80321_flash_0xf0080000 2. Load the gzimg from the TFTP server. RedBoot> load -r -b 0x00200000 gzimg_IQ80321_flash_0xf0080000 Raw file loaded 0x00200000-0x00305fe4 3. Use the RedBoot fis command to copy the image into flash. For more information on the RedBoot Flash Image System, see the RedBoot docu- mentation. RedBoot> fis create -b 0x00200000 -f 0xf0080000 -l 0x00200000 netbsd.gz * CAUTION * about to program 'netbsd.gz' at 0xf0080000..0xf027ffff from 0x00200000 - are you sure (y/n)? y ... Erase from 0xf0080000-0xf0280000: ....................... ... Program from 0x00200000-0x00400000 at 0xf0080000: ...................... ... Unlock from 0xf07e0000-0xf0800000:. ... Erase from 0xf07e0000-0xf0800000:. ... Program from 0x01ddf000-0x01dff000 at 0xf07e0000:. ... Lock from 0xf07e0000-0xf0800000:. Once the compressed kernel image has been copied into flash, it may be started by jumping to the flash address of the image: RedBoot> g 0xf0080000 >> NetBSD/IQ80321 Gzip Boot, Revision 1.1 >> (root@tgm, Thu Mar 28 18:32:45 PST 2002) >> RAM 0xa0000000 - 0xa7ffffff, heap at 0xa7fd0000 >> Load address: 0xa0200000 >> Image size: 739495 Uncompressing image...done. Jumping to image @ 0xa0200000... NetBSD/evbarm (IQ80321) booting ... initarm: Configuring system ... physmemory: 32768 pages at 0xa0000000 -> 0xa7ffffff init subsystems: stacks vectors undefined pmap irq done. [ using 155076 bytes of netbsd ELF symbol table ] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 1.5ZC (IQ80321) #1: Thu Mar 28 18:31:58 PST 2002 root@tgm:/u1/netbsd/src/sys/arch/evbarm/compile/IQ80321 total memory = 128 MB avail memory = 113 MB using 1228 buffers containing 6656 KB of memory mainbus0 (root) cpu0 at mainbus0: i80321 step A-0 (XScale core) cpu0: DC enabled IC enabled WB enabled LABT cpu0: 32KB/32B 32-way Instruction cache cpu0: 32KB/32B 32-way write-back-locking Data cache obio0 at mainbus0 com0 at obio0 addr 0xfe800000: ns16550a, working fifo com0: console iopxs0 at mainbus0: i80321 I/O Processor, acting as PCI host iopxs0: configuring PCI bus pci0 at iopxs0 bus 0 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok wm0 at pci0 dev 4 function 0: Intel i82544 1000BASE-T Ethernet, rev. 2 wm0: interrupting at iop321 irq 27 wm0: Ethernet address 00:07:e9:03:38:40 makphy0 at wm0 phy 1: Marvell 88E1000 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto clock: hz=100 stathz=0 profhz=0 boot device: root device: Installing the NetBSD System Installation for the Technologic Systems TS-7200 The following steps describe how to set up a CompactFlash card for the TS-7200. The TS-7200 can use the interactive installation program sysinst to perform an internet installation from ftp.netbsd.org on the CompactFlash. 1. Place the netbsd-TS7200_INSTALL.bin kernel into the TFTP server's download area. It must be decompressed from the gzipped image in the release directory evbarm/installation/instkernel/netbsd- TS7200_INSTALL.srec.gz server# gunzip netbsd-TS7200_INSTALL.srec.gz server# cp netbsd-TS7200_INSTALL.srec /tftpboot/netbsd-TS7200_INSTALL 2. Load the kernel from the TFTP server. RedBoot> load netbsd-TS7200_INSTALL 3. Start the kernel running. RedBoot> go The kernel will display boot messages, probe for devices, and invoke the interactive sysinst installation tool. Once sysinst has com- pleted installation, the system will reboot back into RedBoot. If the preparation instructions above have been followed, the post- installation NetBSD kernel will be in the FIS ready to be jumped into. You can have RedBoot automatically start NetBSD by putting the command go 0x60660000 into the RedBoot bootscript using the fconfig command. Installation for the Intel IQ80310 The following steps describe how to set up an NFS root environment for the IQ80310 and how to boot the IQ80310. 1. Place the kernel into the TFTP server's download area. RedBoot only loads S-Records, so select a kernel with the ``.srec'' filename suffix. In this example, we will boot the kernel hard- wired to use the on-board Ethernet as the root device. server# cp netbsd-fxp0.srec /tftpboot/netbsd-iq80310-fxp0 2. Unpack the distribution sets into the target's root directory. server# cd /export/client/iq80310 server# gzcat .../base.tgz | tar xvpf - server# gzcat .../etc.tgz | tar xvpf - [repeat for all sets you wish to unpack] 3. Load the kernel from the TFTP server. RedBoot> load netbsd-iq80310-fxp0 Entry point: 0xa0200000, address range: 0xa0200000-0xa035e07c RedBoot> 4. Start the kernel running. The kernel will display boot message, probe for devices, and mount the root file system. If you used a kernel hard-wired to use the on-board Ethernet, it will attempt to mount the root file system automatically. Otherwise, it will prompt for the root device to use. Since the system's run-time environment has not yet been configured, the system should boot into single-user mode. RedBoot> go NetBSD/evbarm (IQ80310) booting ... Resetting secondary PCI bus... initarm: Configuring system ... physmemory: 65536 pages at 0xa0000000 -> 0xafffffff init subsystems: stacks vectors undefined pmap irq done. [ using 155084 bytes of netbsd ELF symbol table ] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 1.5ZC (IQ80310) #20: Fri Mar 29 10:25:53 PST 2002 root@tgm:/u1/netbsd/src/sys/arch/evbarm/compile/IQ80310 total memory = 256 MB avail memory = 232 MB using 1228 buffers containing 13208 KB of memory mainbus0 (root) cpu0 at mainbus0: i80200 step A-0 (XScale core) cpu0: DC enabled IC enabled WB enabled LABT cpu0: 32KB/32B 32-way Instruction cache cpu0: 32KB/32B 32-way write-back-locking Data cache obio0 at mainbus0: board rev. F, CPLD rev. D, backplane present com0 at obio0 addr 0xfe810000: ns16550a, working fifo com0: console com1 at obio0 addr 0xfe800000: ns16550a, working fifo iopxs0 at mainbus0: i80312 Companion I/O, acting as PCI host iopxs0: configuring Secondary PCI bus pci0 at iopxs0 bus 1 pci0: i/o space, memory space enabled ppb0 at pci0 dev 7 function 0: Digital Equipment DECchip 21154 PCI-PCI Bridge (rev. 0x05) pci1 at ppb0 bus 2 pci1: i/o space, memory space enabled fxp0 at pci1 dev 0 function 0: i82559S Ethernet, rev 9 fxp0: interrupting at iq80310 irq 1 fxp0: Ethernet address 00:80:4d:46:0b:b9 inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto clock: hz=100 stathz=0 profhz=0 boot device: root on fxp0 nfs_boot: trying DHCP/BOOTP nfs_boot: DHCP next-server: 192.168.0.1 nfs_boot: my_name=iq80310.lab.wasabisystems.com nfs_boot: my_domain=wasabisystems.com nfs_boot: my_addr=192.168.0.10 nfs_boot: my_mask=255.255.255.0 nfs_boot: gateway=192.168.0.254 root on 192.168.0.1:/export/client/iq80310 /etc/rc.conf is not configured. Multiuser boot aborted. Enter pathname of shell or RETURN for sh: Installation for the Intel IQ80321 The following steps describe how to set up an NFS root environment for the IQ80321 and how to boot the IQ80321. 1. Place the kernel into the TFTP server's download area. RedBoot only loads S-Records, so select a kernel with the ``.srec'' filename suffix. In this example, we will boot the kernel hard- wired to use the on-board Ethernet as the root device. server# cp netbsd-wm0.srec /tftpboot/netbsd-iq80321-wm0 2. Unpack the distribution sets into the target's root directory. server# cd /export/client/iq80321 server# gzcat .../base.tgz | tar xvpf - server# gzcat .../etc.tgz | tar xvpf - [repeat for all sets you wish to unpack] 3. Load the kernel from the TFTP server. RedBoot> load netbsd-iq80321-wm0 Entry point: 0x00200000, address range: 0x00200000-0x00396a40 RedBoot> 4. Start the kernel running. The kernel will display boot message, probe for devices, and mount the root file system. If you used a kernel hard-wired to use the on-board Ethernet, it will attempt to mount the root file system automatically. Otherwise, it will prompt for the root device to use. Since the system's run-time environment has not yet been configured, the system should boot into single-user mode. RedBoot> go NetBSD/evbarm (IQ80321) booting ... initarm: Configuring system ... physmemory: 32768 pages at 0xa0000000 -> 0xa7ffffff init subsystems: stacks vectors undefined pmap irq done. [ using 156468 bytes of netbsd ELF symbol table ] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 1.5ZC (IQ80321) #1: Thu Mar 28 18:20:34 PST 2002 root@tgm:/u1/netbsd/src/sys/arch/evbarm/compile/IQ80321 total memory = 128 MB avail memory = 113 MB using 1228 buffers containing 6656 KB of memory mainbus0 (root) cpu0 at mainbus0: i80321 step A-0 (XScale core) cpu0: DC enabled IC enabled WB enabled LABT cpu0: 32KB/32B 32-way Instruction cache cpu0: 32KB/32B 32-way write-back-locking Data cache obio0 at mainbus0 com0 at obio0 addr 0xfe800000: ns16550a, working fifo com0: console iopxs0 at mainbus0: i80321 I/O Processor, acting as PCI host iopxs0: configuring PCI bus pci0 at iopxs0 bus 0 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok wm0 at pci0 dev 4 function 0: Intel i82544 1000BASE-T Ethernet, rev. 2 wm0: interrupting at iop321 irq 27 wm0: Ethernet address 00:07:e9:03:38:40 makphy0 at wm0 phy 1: Marvell 88E1000 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto clock: hz=100 stathz=0 profhz=0 boot device: root on wm0 nfs_boot: trying DHCP/BOOTP nfs_boot: DHCP next-server: 192.168.0.1 nfs_boot: my_name=iq80321.lab.wasabisystems.com nfs_boot: my_domain=wasabisystems.com nfs_boot: my_addr=192.168.0.11 nfs_boot: my_mask=255.255.255.0 nfs_boot: gateway=192.168.0.254 root on 192.168.0.1:/export/client/iq80321 /etc/rc.conf is not configured. Multiuser boot aborted. Enter pathname of shell or RETURN for sh: Post installation steps Once you've got the operating system running, there are a few things you need to do in order to bring the system into a properly configured state. The most important steps are described below. 1. Configuring /etc/rc.conf If you or the installation software haven't done any configuration of /etc/rc.conf (sysinst usually will), the system will drop you into single user mode on first reboot with the message /etc/rc.conf is not configured. Multiuser boot aborted. and with the root file system (/) mounted read-only. When the sys- tem asks you to choose a shell, simply press RETURN to get to a /bin/sh prompt. If you are asked for a terminal type, respond with vt220 (or whatever is appropriate for your terminal type) and press RETURN. You may need to type one of the following commands to get your delete key to work properly, depending on your keyboard: # stty erase '^h' # stty erase '^?' At this point, you need to configure at least one file in the /etc directory. You will need to mount your root file system read/write with: # /sbin/mount -u -w / Change to the /etc directory and take a look at the /etc/rc.conf file. Modify it to your tastes, making sure that you set rc_configured=YES so that your changes will be enabled and a multi- user boot can proceed. Default values for the various programs can be found in /etc/defaults/rc.conf, where some in-line documentation may be found. More complete documentation can be found in rc.conf(5). When you have finished editing /etc/rc.conf, type exit at the prompt to leave the single-user shell and continue with the multi-user boot. Other values that may need to be set in /etc/rc.conf for a networked environment are hostname and possibly defaultroute. You may also need to add an ifconfig_int for your network interface, along the lines of ifconfig_fxp0="inet 192.0.2.123 netmask 255.255.255.0" or, if you have myname.my.dom in /etc/hosts: ifconfig_fxp0="inet myname.my.dom netmask 255.255.255.0" To enable proper hostname resolution, you will also want to add an /etc/resolv.conf file or (if you are feeling a little more adventur- ous) run named(8). See resolv.conf(5) or named(8) for more informa- tion. Instead of manually configuring network and naming service, DHCP can be used by setting dhclient=YES in /etc/rc.conf. Other files in /etc that may require modification or setting up include /etc/mailer.conf, /etc/nsswitch.conf, and /etc/wscons.conf. 2. Logging in After reboot, you can log in as root at the login prompt. Unless you've set a password in sysinst, there is no initial password. You should create an account for yourself (see below) and protect it and the ``root'' account with good passwords. By default, root login from the network is disabled (even via ssh(1)). One way to become root over the network is to log in as a different user that belongs to group ``wheel'' (see group(5)) and use su(1) to become root. 3. Adding accounts Use the useradd(8) command to add accounts to your system. Do not edit /etc/passwd directly! See vipw(8) and pwd_mkdb(8) if you want to edit the password database. 4. The X Window System If you installed the X Window System, you may want to read the chap- ter about X in the NetBSD Guide: http://netbsd.org/docs/guide/en/chap-x.html 5. Installing third party packages If you wish to install any of the software freely available for UNIX-like systems you are strongly advised to first check the NetBSD package system, pkgsrc. pkgsrc automatically handles any changes necessary to make the software run on NetBSD. This includes the retrieval and installation of any other packages on which the soft- ware may depend. o More information on the package system is available at http://www.NetBSD.org/docs/software/packages.html o A list of available packages suitable for browsing is at ftp://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc/README.html o Precompiled binaries can be found at ftp://ftp.NetBSD.org/pub/pkgsrc/packages/NetBSD/ usually in the evbarm/6.0.6/All subdir. If you installed pkgin(1) in the sysinst post-installation configuration menu, you can use it to automatically install binary packages over the network. Assuming that /usr/pkg/etc/pkgin/repositories.conf is correctly configured, you can install them with the following commands: # pkgin install tcsh # pkgin install bash # pkgin install perl # pkgin install apache # pkgin install kde # pkgin install firefox ... Note: Some mirror sites don't mirror the /pub/pkgsrc directory. The above commands will install the Tenex-csh and Bourne Again shells, the Perl programming language, Apache web server, KDE desktop environment and the Firefox web browser as well as all the packages they depend on. o If you did not install it from the sysinst post-installation configuration menu, the pkgsrc(7) framework for compiling pack- ages can be obtained by retrieving the file ftp://ftp.NetBSD.org/pub/pkgsrc/pkgsrc.tar.gz. It is typically extracted into /usr/pkgsrc (though other loca- tions work fine) with the commands: # cd /usr # tar -zxpf pkgsrc.tar.gz After extracting, see the doc/pkgsrc.txt file in the extraction directory (e.g., /usr/pkgsrc/doc/pkgsrc.txt) for more informa- tion. 6. Misc o Edit /etc/mail/aliases to forward root mail to the right place. Don't forget to run newaliases(1) afterwards. o The /etc/postfix/main.cf file will almost definitely need to be adjusted. If you prefer a different MTA, then install it using pkgsrc or by hand and adjust /etc/mailer.conf. o Edit /etc/rc.local to run any local daemons you use. o Many of the /etc files are documented in section 5 of the man- ual; so just invoking # man 5 filename is likely to give you more information on these files. Upgrading a previously-installed NetBSD System The easiest way to upgrade to NetBSD 6.0.6 is with binaries, and that is the method documented here. To do the upgrade, you must have one form of boot media available. You must also have at least the base and kern binary distribution sets avail- able. Finally, you must have sufficient disk space available to install the new binaries. Since files already installed on the system are over- written in place, you only need additional free space for files which weren't previously installed or to account for growth of the sets between releases. If you have a few megabytes free on each of your root (/) and /usr partitions, you should have enough space. Since upgrading involves replacing the kernel, boot blocks, and most of the system binaries, it has the potential to cause data loss. You are strongly advised to back up any important data on the NetBSD partition or on another operating system's partition on your disk before beginning the upgrade process. The upgrade procedure is similar to an installation, but without the hard disk partitioning. sysinst will attempt to merge the settings stored in your /etc directory with the new version of NetBSD. Also, file systems are checked before unpacking the sets. Fetching the binary sets is done in the same manner as the installation procedure; refer to the installa- tion part of the document for help. After a new kernel has been copied to your hard disk, your machine is a complete NetBSD 6.0.6 system. However, that doesn't mean that you're finished with the upgrade process. You will probably want to update the set of device nodes you have in /dev. If you've changed the contents of /dev by hand, you will need to be careful about this, but if not, you can just cd into /dev, and run the command: # sh MAKEDEV all Finally, you will want to delete old binaries that were part of the ver- sion of NetBSD that you upgraded from and have since been removed from the NetBSD distribution. Compatibility Issues With Previous NetBSD Releases Users upgrading from previous versions of NetBSD may wish to bear the following problems and compatibility issues in mind when upgrading to NetBSD 6.0.6. Note that sysinst will automatically invoke postinstall fix and thus all issues that are fixed by postinstall by default (see below) will be handled. Issues affecting an upgrade from NetBSD 5.x releases The pthread libraries from previous versions of NetBSD require that the sysctl(3) node kern.no_sa_support be set to 0. This affects the follow- ing environments: o Running a 5.0 kernel with an older userland. o Running an older userland inside a chroot'ed environment on a 5.0 system. o Running older statically linked pthread applications. The 5.0 kernel defaults to 0 for kern.no_sa_support, which covers the first case. However, please note that a full installation of 5.0 (either from scratch or through an upgrade) will set kern.no_sa_support to 1 dur- ing the boot process. This means that for the last two cases, you will have to manually set kern.no_sa_support to 0, using either the sysctl(8) command or through sysctl.conf(5). The implementation of SHA2-HMAC in KAME_IPSEC as used in NetBSD-5 and before did not comply to current standards. FAST_IPSEC does, with the result that old and new systems cannot communicate over IPSEC, if one of the affected authentication algorithms (hmac_sha256, hmac_sha384, hmac_sha512) is used. Issues affecting an upgrade from NetBSD 4.x releases The following issues can generally be resolved by running postinstall with the etc set: postinstall -s /path/to/etc.tgz check postinstall -s /path/to/etc.tgz fix Issues fixed by postinstall: o Various files in /etc need upgrading. These include: - /etc/defaults/* - /etc/mtree/* - /etc/daily - /etc/weekly - /etc/monthly - /etc/security - /etc/rc.subr - /etc/rc - /etc/rc.shutdown - /etc/rc.d/* - /etc/envsys.conf The following issues need to be resolved manually: o The users `_httpd' and `_timedc' and the groups `_httpd' and `_timedc' need to be created. o Unprivileged use of the mount(8) command now requires the nosuid and nodev options to be explicitly specified. Previ- ously, these options were automatically enforced even if they were not explicitly specified. o A number of things have been removed from the NetBSD 6.0.6 release. See the "Components removed from NetBSD" section near the beginning of this document for a list. Using online NetBSD documentation Documentation is available if you installed the manual distribution set. Traditionally, the ``man pages'' (documentation) are denoted by `name(section)'. Some examples of this are o intro(1), o man(1), o apropos(1), o passwd(1), and o passwd(5). The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8. The man command is used to view the documentation on a topic, and is started by entering man [section] topic. The brackets [] around the sec- tion should not be entered, but rather indicate that the section is optional. If you don't ask for a particular section, the topic with the lowest numbered section name will be displayed. For instance, after log- ging in, enter # man passwd to read the documentation for passwd(1). To view the documentation for passwd(5), enter # man 5 passwd instead. If you are unsure of what man page you are looking for, enter # apropos subject-word where subject-word is your topic of interest; a list of possibly related man pages will be displayed. Administrivia If you've got something to say, do so! We'd like your input. There are various mailing lists available via the mailing list server at majordomo@NetBSD.org. To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instruc- tions. See http://www.NetBSD.org/mailinglists/ for a web interface. There are various mailing lists set up to deal with comments and ques- tions about this release. Please send comments to: netbsd-comments@NetBSD.org. To report bugs, use the send-pr(1) command shipped with NetBSD, and fill in as much information about the problem as you can. Good bug reports include lots of details. Bugs also can be submitted and queried with the web interface at http://www.NetBSD.org/support/send-pr.html There are also port-specific mailing lists, to discuss aspects of each port of NetBSD. Use majordomo to find their addresses, or visit http://www.NetBSD.org/mailinglists/ If you're interested in doing a serious amount of work on a specific port, you probably should contact the `owner' of that port (listed below). If you'd like to help with this effort, and have an idea as to how you could be useful, send us mail or subscribe to: netbsd-users@NetBSD.org. As a favor, please avoid mailing huge documents or files to these mailing lists. Instead, put the material you would have sent up for FTP or WWW somewhere, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it. Thanks go to o The former members of UCB's Computer Systems Research Group, includ- ing (but not limited to): Keith Bostic Ralph Campbell Mike Karels Marshall Kirk McKusick for their work on BSD systems, support, and encouragement. o The Internet Systems Consortium, Inc. for hosting the NetBSD FTP, CVS, AnonCVS, mail, mail archive, GNATS, SUP, Rsync and WWW servers. o The Internet Research Institute in Japan for hosting the server which runs the CVSweb interface to the NetBSD source tree. o The Lulea Academic Computer Society for providing the backup services server. o The Columbia University Computer Science Department for hosting the NYC build cluster. o The Western Washington University Computer Science Department for running the WWU build cluster. o The many organizations that provide NetBSD mirror sites. o Without CVS, this project would be impossible to manage, so our hats go off to Brian Berliner, Jeff Polk, and the various other people who've had a hand in making CVS a useful tool. o We list the individuals and organizations that have made donations or loans of hardware and/or money, to support NetBSD development, and deserve credit for it at http://www.NetBSD.org/donations/ (If you're not on that list and should be, tell us! We probably were not able to get in touch with you, to verify that you wanted to be listed.) o Finally, we thank all of the people who've put sweat and tears into developing NetBSD since its inception in January, 1993. (Obviously, there are a lot more people who deserve thanks here. If you're one of them, and would like to be mentioned, tell us!) We are... (in alphabetical order) The NetBSD core group: Alan Barrett apb@NetBSD.org Alistair Crooks agc@NetBSD.org Matthew Green mrg@NetBSD.org Chuck Silvers chs@NetBSD.org Matt Thomas matt@NetBSD.org YAMAMOTO Takashi yamt@NetBSD.org Christos Zoulas christos@NetBSD.org The portmasters (and their ports): Reinoud Zandijk reinoud acorn32 Matt Thomas matt alpha Ignatios Souvatzis is amiga Ignatios Souvatzis is amigappc Noriyuki Soda soda arc Julian Coleman jdc atari Matthias Drochner drochner cesfic Erik Berls cyber cobalt Antti Kantee pooka emips Simon Burge simonb evbmips Steve Woodford scw evbppc Izumi Tsutsui tsutsui ews4800mips Izumi Tsutsui tsutsui hp300 Nick Hudson skrll hp700 Valeriy E. Ushakov uwe hpcsh Matt Thomas matt ibmnws Gavan Fantom gavan iyonix Valeriy E. Ushakov uwe landisk Izumi Tsutsui tsutsui luna68k Scott Reynolds scottr mac68k Michael Lorenz macallan macppc Steve Woodford scw mvme68k Steve Woodford scw mvmeppc Matt Thomas matt netwinder Izumi Tsutsui tsutsui news68k Tim Rightnour garbled ofppc Simon Burge simonb pmax Tim Rightnour garbled prep Tim Rightnour garbled rs6000 Tohru Nishimura nisimura sandpoint Simon Burge simonb sbmips Soren Jorvang soren sgimips SAITOH Masanobu msaitoh sh3 Martin Husemann martin sparc64 Anders Magnusson ragge vax NISHIMURA Takeshi nsmrtks x68k Manuel Bouyer bouyer xen The NetBSD 6.0.6 Release Engineering team: Stephen Borrill sborrill@NetBSD.org Manuel Bouyer bouyer@NetBSD.org David Brownlee abs@NetBSD.org James Chacon jmc@NetBSD.org Julian Coleman jdc@NetBSD.org Alistair G. Crooks agc@NetBSD.org Havard Eidnes he@NetBSD.org John Heasley heas@NetBSD.org Martin Husemann martin@NetBSD.org Soren Jacobsen snj@NetBSD.org Phil Nelson phil@NetBSD.org Jeremy C. Reed reed@NetBSD.org Jeff Rizzo riz@NetBSD.org SAITOH Masanobu msaitoh@NetBSD.org NetBSD Developers: Nathan Ahlstrom nra@NetBSD.org Steve Allen wormey@NetBSD.org Jukka Andberg jandberg@NetBSD.org Julian Assange proff@NetBSD.org Lennart Augustsson augustss@NetBSD.org Zafer Aydogan zafer@NetBSD.org Christoph Badura bad@NetBSD.org Marc Balmer mbalmer@NetBSD.org Bang Jun-Young junyoung@NetBSD.org Dieter Baron dillo@NetBSD.org Robert V. Baron rvb@NetBSD.org Alan Barrett apb@NetBSD.org Grant Beattie grant@NetBSD.org Erik Berls cyber@NetBSD.org Hiroyuki Bessho bsh@NetBSD.org John Birrell jb@NetBSD.org Rafal Boni rafal@NetBSD.org Stephen Borrill sborrill@NetBSD.org Sean Boudreau seanb@NetBSD.org Manuel Bouyer bouyer@NetBSD.org Allen Briggs briggs@NetBSD.org Mark Brinicombe mark@NetBSD.org Aaron Brown abrown@NetBSD.org Andrew Brown atatat@NetBSD.org David Brownlee abs@NetBSD.org Jon Buller jonb@NetBSD.org Simon Burge simonb@NetBSD.org Robert Byrnes byrnes@NetBSD.org Pavel Cahyna pavel@NetBSD.org D'Arcy J.M. Cain darcy@NetBSD.org Taylor R. Campbell riastradh@NetBSD.org Daniel Carosone dan@NetBSD.org Dave Carrel carrel@NetBSD.org James Chacon jmc@NetBSD.org Mihai Chelaru kefren@NetBSD.org Aleksey Cheusov cheusov@NetBSD.org Bill Coldwell billc@NetBSD.org Julian Coleman jdc@NetBSD.org Marcus Comstedt marcus@NetBSD.org Jeremy Cooper jeremy@NetBSD.org Thomas Cort tcort@NetBSD.org Chuck Cranor chuck@NetBSD.org Alistair Crooks agc@NetBSD.org Johan Danielsson joda@NetBSD.org John Darrow jdarrow@NetBSD.org Jed Davis jld@NetBSD.org Matt DeBergalis deberg@NetBSD.org Arnaud Degroote degroote@NetBSD.org Rob Deker deker@NetBSD.org Chris G. Demetriou cgd@NetBSD.org Tracy Di Marco White gendalia@NetBSD.org Jaromir Dolecek jdolecek@NetBSD.org Andy Doran ad@NetBSD.org Roland Dowdeswell elric@NetBSD.org Steven Drake sbd@NetBSD.org Emmanuel Dreyfus manu@NetBSD.org Matthias Drochner drochner@NetBSD.org Jun Ebihara jun@NetBSD.org Havard Eidnes he@NetBSD.org Jaime A Fournier ober@NetBSD.org Stoned Elipot seb@NetBSD.org Michael van Elst mlelstv@NetBSD.org Enami Tsugutomo enami@NetBSD.org Bernd Ernesti veego@NetBSD.org Erik Fair fair@NetBSD.org Gavan Fantom gavan@NetBSD.org Hauke Fath hauke@NetBSD.org Hubert Feyrer hubertf@NetBSD.org Jason R. Fink jrf@NetBSD.org Matt J. Fleming mjf@NetBSD.org Marty Fouts marty@NetBSD.org Liam J. Foy liamjfoy@NetBSD.org Matt Fredette fredette@NetBSD.org Thorsten Frueauf frueauf@NetBSD.org Castor Fu castor@NetBSD.org Makoto Fujiwara mef@NetBSD.org Ichiro Fukuhara ichiro@NetBSD.org Quentin Garnier cube@NetBSD.org Thomas Gerner thomas@NetBSD.org Simon J. Gerraty sjg@NetBSD.org Justin Gibbs gibbs@NetBSD.org Chris Gilbert chris@NetBSD.org Eric Gillespie epg@NetBSD.org Brian Ginsbach ginsbach@NetBSD.org Oliver V. Gould ver@NetBSD.org Paul Goyette pgoyette@NetBSD.org Michael Graff explorer@NetBSD.org Matthew Green mrg@NetBSD.org Andreas Gustafsson gson@NetBSD.org Ulrich Habel rhaen@NetBSD.org Jun-ichiro itojun Hagino itojun@NetBSD.org HAMAJIMA Katsuomi hamajima@NetBSD.org Adam Hamsik haad@NetBSD.org Juergen Hannken-Illjes hannken@NetBSD.org Charles M. Hannum mycroft@NetBSD.org Yorick Hardy yhardy@NetBSD.org Ben Harris bjh21@NetBSD.org Eric Haszlakiewicz erh@NetBSD.org John Hawkinson jhawk@NetBSD.org Emile Heitor imil@NetBSD.org John Heasley heas@NetBSD.org Lars Heidieker para@NetBSD.org Geert Hendrickx ghen@NetBSD.org Rene Hexel rh@NetBSD.org Iain Hibbert plunky@NetBSD.org Kouichirou Hiratsuka hira@NetBSD.org Michael L. Hitch mhitch@NetBSD.org Adam Hoka ahoka@NetBSD.org Jachym Holecek freza@NetBSD.org David A. Holland dholland@NetBSD.org Christian E. Hopps chopps@NetBSD.org Daniel Horecki morr@NetBSD.org Ken Hornstein kenh@NetBSD.org Marc Horowitz marc@NetBSD.org Eduardo Horvath eeh@NetBSD.org Nick Hudson skrll@NetBSD.org Shell Hung shell@NetBSD.org Darran Hunt darran@NetBSD.org Martin Husemann martin@NetBSD.org Dean Huxley dean@NetBSD.org Love Hoernquist Astrand lha@NetBSD.org Roland Illig rillig@NetBSD.org Bernardo Innocenti bernie@NetBSD.org Tetsuya Isaki isaki@NetBSD.org ITOH Yasufumi itohy@NetBSD.org IWAMOTO Toshihiro toshii@NetBSD.org Matthew Jacob mjacob@NetBSD.org Soren Jacobsen snj@NetBSD.org Lonhyn T. Jasinskyj lonhyn@NetBSD.org Darrin Jewell dbj@NetBSD.org Nicolas Joly njoly@NetBSD.org Soren Jorvang soren@NetBSD.org Takahiro Kambe taca@NetBSD.org Antti Kantee pooka@NetBSD.org Frank Kardel kardel@NetBSD.org KAWAMOTO Yosihisa kawamoto@NetBSD.org Min Sik Kim minskim@NetBSD.org KIYOHARA Takashi kiyohara@NetBSD.org Thomas Klausner wiz@NetBSD.org Klaus Klein kleink@NetBSD.org John Klos jklos@NetBSD.org Wayne Knowles wdk@NetBSD.org Takayoshi Kochi kochi@NetBSD.org Jonathan A. Kollasch jakllsch@NetBSD.org Radoslaw Kujawa rkujawa@NetBSD.org Jochen Kunz jkunz@NetBSD.org Martti Kuparinen martti@NetBSD.org Arnaud Lacombe alc@NetBSD.org Kevin Lahey kml@NetBSD.org David Laight dsl@NetBSD.org Johnny C. Lam jlam@NetBSD.org Guillaume Lasmayous gls@NetBSD.org Martin J. Laubach mjl@NetBSD.org Greg Lehey grog@NetBSD.org Ted Lemon mellon@NetBSD.org Christian Limpach cl@NetBSD.org Frank van der Linden fvdl@NetBSD.org Joel Lindholm joel@NetBSD.org Tonnerre Lombard tonnerre@NetBSD.org Mike Long mikel@NetBSD.org Michael Lorenz macallan@NetBSD.org Warner Losh imp@NetBSD.org Tomasz Luchowski zuntum@NetBSD.org Federico Lupi federico@NetBSD.org Brett Lymn blymn@NetBSD.org MAEKAWA Masahide gehenna@NetBSD.org Anders Magnusson ragge@NetBSD.org John Marino marino@NetBSD.org Roy Marples roy@NetBSD.org Cherry G. Mathew cherry@NetBSD.org David Maxwell david@NetBSD.org Gregory McGarry gmcgarry@NetBSD.org Dan McMahill dmcmahill@NetBSD.org Jared D. McNeill jmcneill@NetBSD.org Neil J. McRae neil@NetBSD.org Julio M. Merino Vidal jmmv@NetBSD.org Perry Metzger perry@NetBSD.org Luke Mewburn lukem@NetBSD.org Jean-Yves Migeon jym@NetBSD.org Brook Milligan brook@NetBSD.org Minoura Makoto minoura@NetBSD.org Simas Mockevicius symka@NetBSD.org der Mouse mouse@NetBSD.org Constantine A. Murenin cnst@NetBSD.org Joseph Myers jsm@NetBSD.org Tuomo Maekinen tjam@NetBSD.org Zoltan Arnold NAGY zoltan@NetBSD.org Ken Nakata kenn@NetBSD.org Takeshi Nakayama nakayama@NetBSD.org Alexander Nasonov alnsn@NetBSD.org Phil Nelson phil@NetBSD.org John Nemeth jnemeth@NetBSD.org NISHIMURA Takeshi nsmrtks@NetBSD.org Tohru Nishimura nisimura@NetBSD.org NONAKA Kimihiro nonaka@NetBSD.org Takehiko NOZAKI tnozaki@NetBSD.org Tobias Nygren tnn@NetBSD.org OBATA Akio obache@NetBSD.org Jesse Off joff@NetBSD.org Tatoku Ogaito tacha@NetBSD.org OKANO Takayoshi kano@NetBSD.org Masaru Oki oki@NetBSD.org Ryo ONODERA ryoon@NetBSD.org Atsushi Onoe onoe@NetBSD.org Greg Oster oster@NetBSD.org Jonathan Perkin sketch@NetBSD.org Fredrik Pettai pettai@NetBSD.org Herb Peyerl hpeyerl@NetBSD.org Matthias Pfaller matthias@NetBSD.org Chris Pinnock cjep@NetBSD.org Adrian Portelli adrianp@NetBSD.org Chris Provenzano proven@NetBSD.org Mindaugas Rasiukevicius rmind@NetBSD.org Michael Rauch mrauch@NetBSD.org Marc Recht recht@NetBSD.org Darren Reed darrenr@NetBSD.org Jeremy C. Reed reed@NetBSD.org Jens Rehsack sno@NetBSD.org Antoine Reilles tonio@NetBSD.org Tyler R. Retzlaff rtr@NetBSD.org Scott Reynolds scottr@NetBSD.org Tim Rightnour garbled@NetBSD.org Jeff Rizzo riz@NetBSD.org Hans Rosenfeld hans@NetBSD.org Steve Rumble rumble@NetBSD.org Rumko rumko@NetBSD.org Jukka Ruohonen jruoho@NetBSD.org Blair J. Sadewitz bjs@NetBSD.org David Sainty dsainty@NetBSD.org SAITOH Masanobu msaitoh@NetBSD.org Kazuki Sakamoto sakamoto@NetBSD.org Curt Sampson cjs@NetBSD.org Wilfredo Sanchez wsanchez@NetBSD.org Ty Sarna tsarna@NetBSD.org SATO Kazumi sato@NetBSD.org Jan Schaumann jschauma@NetBSD.org Matthias Scheler tron@NetBSD.org Silke Scheler silke@NetBSD.org Karl Schilke (rAT) rat@NetBSD.org Amitai Schlair schmonz@NetBSD.org Konrad Schroder perseant@NetBSD.org Georg Schwarz schwarz@NetBSD.org Lubomir Sedlacik salo@NetBSD.org Christopher SEKIYA sekiya@NetBSD.org Reed Shadgett dent@NetBSD.org John Shannon shannonjr@NetBSD.org Tim Shepard shep@NetBSD.org Naoto Shimazaki igy@NetBSD.org Ryo Shimizu ryo@NetBSD.org Takao Shinohara shin@NetBSD.org Takuya SHIOZAKI tshiozak@NetBSD.org Daniel Sieger dsieger@NetBSD.org Chuck Silvers chs@NetBSD.org Thor Lancelot Simon tls@NetBSD.org Jeff Smith jeffs@NetBSD.org Noriyuki Soda soda@NetBSD.org Wolfgang Solfrank ws@NetBSD.org Joerg Sonnenberger joerg@NetBSD.org Ignatios Souvatzis is@NetBSD.org T K Spindler dogcow@NetBSD.org Matthew Sporleder mspo@NetBSD.org Bill Squier groo@NetBSD.org Adrian Steinmann ast@NetBSD.org Bill Studenmund wrstuden@NetBSD.org Kevin Sullivan sullivan@NetBSD.org Kimmo Suominen kim@NetBSD.org Gregoire Sutre gsutre@NetBSD.org Sergey Svishchev shattered@NetBSD.org Robert Swindells rjs@NetBSD.org Shin Takemura takemura@NetBSD.org TAMURA Kent kent@NetBSD.org Shin'ichiro TAYA taya@NetBSD.org Hasso Tepper hasso@NetBSD.org Matt Thomas matt@NetBSD.org Jason Thorpe thorpej@NetBSD.org Christoph Toshok toshok@NetBSD.org Greg Troxel gdt@NetBSD.org Tsubai Masanari tsubai@NetBSD.org Izumi Tsutsui tsutsui@NetBSD.org UCHIYAMA Yasushi uch@NetBSD.org Masao Uebayashi uebayasi@NetBSD.org Shuichiro URATA ur@NetBSD.org Valeriy E. Ushakov uwe@NetBSD.org Todd Vierling tv@NetBSD.org Aymeric Vincent aymeric@NetBSD.org Paul Vixie vixie@NetBSD.org Mike M. Volokhov mishka@NetBSD.org Krister Walfridsson kristerw@NetBSD.org Mark Weinem weinem@NetBSD.org Lex Wennmacher wennmach@NetBSD.org Leo Weppelman leo@NetBSD.org Assar Westerlund assar@NetBSD.org Frank Wille phx@NetBSD.org Nathan Williams nathanw@NetBSD.org Rob Windsor windsor@NetBSD.org Jim Wise jwise@NetBSD.org Colin Wood ender@NetBSD.org Steve Woodford scw@NetBSD.org YAMAMOTO Takashi yamt@NetBSD.org Yuji Yamano yyamano@NetBSD.org David Young dyoung@NetBSD.org Arnaud Ysmal stacktic@NetBSD.org Reinoud Zandijk reinoud@NetBSD.org S.P.Zeidler spz@NetBSD.org Tim Zingelman tez@NetBSD.org Christos Zoulas christos@NetBSD.org Legal Mumbo-Jumbo All product names mentioned herein are trademarks or registered trade- marks of their respective owners. The following notices are required to satisfy the license terms of the software that we have mentioned in this document: NetBSD is a registered trademark of The NetBSD Foundation, Inc. This product includes software developed by the University of California, Berkeley and its contributors. This product includes software developed by the NetBSD Foundation. This product includes software developed by The NetBSD Foundation, Inc. and its contributors. This product includes software developed for the NetBSD Project. See http://www.netbsd.org/ for information about NetBSD. This product includes software developed by Intel Corporation and its contributors. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com) This product includes cryptographic software written by Eric Young (eay@mincom.oz.au) This product includes software designed by William Allen Simpson. This product includes software developed at Ludd, University of Lulea, Sweden and its contributors. This product includes software developed at Ludd, University of Lulea. This product includes software developed at the Information Technology Division, US Naval Research Laboratory. This product includes software developed by David Jones and Gordon Ross This product includes software developed by Hellmuth Michaelis and Joerg Wunsch This product includes software developed by Internet Research Institute, Inc. This product includes software developed by Leo Weppelman and Waldi Ravens. This product includes software developed by Mika Kortelainen This product includes software developed by Aaron Brown and Harvard Uni- versity. This product includes software developed by Adam Ciarcinski for the NetBSD project. This product includes software developed by Adam Glass and Charles M. Hannum. This product includes software developed by Adam Glass. This product includes software developed by Advanced Risc Machines Ltd. This product includes software developed by Alex Zepeda, and Colin Wood for the NetBSD Projet. This product includes software developed by Alex Zepeda. This product includes software developed by Amancio Hasty and Roger Hardiman This product includes software developed by Berkeley Software Design, Inc. This product includes software developed by Bill Paul. This product includes software developed by Bodo Moeller. (If available, substitute umlauted o for oe) This product includes software developed by Boris Popov. This product includes software developed by Brini. This product includes software developed by Bruce M. Simpson. This product includes software developed by Causality Limited. This product includes software developed by Charles Hannum. This product includes software developed by Charles M. Hannum, by the University of Vermont and State Agricultural College and Garrett A. Wollman, by William F. Jolitz, and by the University of California, Berkeley, Lawrence Berkeley Laboratory, and its contributors. This product includes software developed by Charles M. Hannum. This product includes software developed by Christian E. Hopps, Ezra Story, Kari Mettinen, Markus Wild, Lutz Vieweg and Michael Teske. This product includes software developed by Christian E. Hopps. This product includes software developed by Christopher G. Demetriou for the NetBSD Project. This product includes software developed by Christopher G. Demetriou. This product includes software developed by Christos Zoulas. This product includes software developed by Chuck Silvers. This product includes software developed by Colin Wood for the NetBSD Project. This product includes software developed by Colin Wood. This product includes software developed by Daan Vreeken. This product includes software developed by Daishi Kato This product includes software developed by Daniel Widenfalk and Michael L. Hitch. This product includes software developed by Daniel Widenfalk for the NetBSD Project. This product includes software developed by Dean Huxley. This product includes software developed by Eric S. Hvozda. This product includes software developed by Eric S. Raymond This product includes software developed by Eric Young (eay@@min- com.oz.au) This product includes software developed by Eric Young (eay@crypt- soft.com) This product includes software developed by Eric Young (eay@mincom.oz.au) This product includes software developed by K. Kobayashi. This product includes software developed by K. Kobayashi and H. Shimokawa. This product includes software developed by Ezra Story and by Kari Met- tinen. This product includes software developed by Ezra Story, by Kari Mettinen and by Bernd Ernesti. This product includes software developed by Ezra Story, by Kari Mettinen, Michael Teske and by Bernd Ernesti. This product includes software developed by Ezra Story, by Kari Mettinen, and Michael Teske. This product includes software developed by Ezra Story. This product includes software developed by Florian Stoehr. This product includes software developed by Frank van der Linden for the NetBSD Project. This product includes software developed by Gardner Buchanan. This product includes software developed by Garrett D'Amore. This product includes software developed by Gary Thomas. This product includes software developed by Gordon Ross This product includes software developed by Harvard University and its contributors. This product includes software developed by Harvard University. This product includes software developed by Henrik Vestergaard Draboel. This product includes software developed by Herb Peyerl. This product includes software developed by Hidetoshi Shimokawa. This product includes software developed by Ian W. Dall. This product includes software developed by Ignatios Souvatzis for the NetBSD Project. This product includes software developed by Internet Initiative Japan Inc. This product includes software developed by James R. Maynard III. This product includes software developed by Jason L. Wright This product includes software developed by Jason R. Thorpe for And Com- munications, http://www.and.com/ This product includes software developed by Joachim Koenig-Baltes. This product includes software developed by Jochen Pohl for The NetBSD Project. This product includes software developed by Joerg Wunsch This product includes software developed by John Birrell. This product includes software developed by John P. Wittkoski. This product includes software developed by John Polstra. This product includes software developed by Jonathan R. Stone for the NetBSD Project. This product includes software developed by Jonathan Stone and Jason R. Thorpe for the NetBSD Project. This product includes software developed by Jonathan Stone. This product includes software developed by Julian Highfield. This product includes software developed by Kazuhisa Shimizu. This product includes software developed by Kazuki Sakamoto. This product includes software developed by Kenneth Stailey. This product includes software developed by Kiyoshi Ikehara. This product includes software developed by Klaus Burkert,by Bernd Ernesti, by Michael van Elst, and by the University of California, Berke- ley and its contributors. This product includes software developed by LAN Media Corporation and its contributors. This product includes software developed by Lloyd Parkes. This product includes software developed by Lutz Vieweg. This product includes software developed by MINOURA Makoto, Takuya Harakawa. This product includes software developed by Marc Horowitz. This product includes software developed by Marcus Comstedt. This product includes software developed by Mark Brinicombe for the NetBSD project. This product includes software developed by Mark Brinicombe. This product includes software developed by Mark Tinguely and Jim Lowe This product includes software developed by Markus Wild. This product includes software developed by Masanobu Saitoh. This product includes software developed by Masaru Oki. This product includes software developed by Matthew Fredette. This product includes software developed by Michael Smith. This product includes software developed by Mike Pritchard. This product includes software developed by Mike Pritchard and contribu- tors. This product includes software developed by Minoura Makoto. This product includes software developed by Niels Provos. This product includes software developed by Niklas Hallqvist, Brandon Creighton and Job de Haas. This product includes software developed by Niklas Hallqvist. This product includes software developed by Paul Kranenburg. This product includes software developed by Paul Mackerras. This product includes software developed by Per Fogelstrom This product includes software developed by Peter Galbavy. This product includes software developed by Phase One, Inc. This product includes software developed by Philip A. Nelson. This product includes software developed by RiscBSD. This product includes software developed by Roar Thronaes. This product includes software developed by Rodney W. Grimes. This product includes software developed by Roger Hardiman This product includes software developed by Rolf Grossmann. This product includes software developed by Ross Harvey for the NetBSD Project. This product includes software developed by Ross Harvey. This product includes software developed by Scott Bartram. This product includes software developed by Scott Stevens. This product includes software developed by Shingo WATANABE. This product includes software developed by Softweyr LLC, the University of California, Berkeley, and its contributors. This product includes software developed by Stephan Thesing. This product includes software developed by Steven M. Bellovin. This product includes software developed by Takashi Hamada. This product includes software developed by Takumi Nakamura. This product includes software developed by Tatoku Ogaito for the NetBSD Project. This product includes software developed by Terrence R. Lambert. This product includes software developed by TooLs GmbH. This product includes software developed by Trimble Navigation, Ltd. This product includes software developed by WIDE Project and its contrib- utors. This product includes software developed by Waldi Ravens. This product includes software developed by Wasabi Systems for Zembu Labs, Inc. http://www.zembu.com/ This product includes software developed by Winning Strategies, Inc. This product includes software developed by Wolfgang Solfrank. This product includes software developed by Yasushi Yamasaki. This product includes software developed by Yen Yen Lim and North Dakota State University. This product includes software developed by Zembu Labs, Inc. This product includes software developed by the Alice Group. This product includes software developed by the Center for Software Sci- ence at the University of Utah. This product includes software developed by the Charles D. Cranor, Wash- ington University, University of California, Berkeley and its contribu- tors. This product includes software developed by the Computer Systems Engi- neering Group at Lawrence Berkeley Laboratory. This product includes software developed by the David Muir Sharnoff. This product includes software developed by the Harvard University and its contributors. This product includes software developed by the Network Research Group at Lawrence Berkeley Laboratory. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/) This product includes software developed by the PocketBSD project and its contributors. This product includes software developed by the RiscBSD kernel team This product includes software developed by the RiscBSD team. This product includes software developed by the SMCC Technology Develop- ment Group at Sun Microsystems, Inc. This product includes software developed by the University of California, Berkeley and its contributors, as well as the Trustees of Columbia Uni- versity. This product includes software developed by the University of California, Lawrence Berkeley Laboratory and its contributors. This product includes software developed by the University of California, Lawrence Berkeley Laboratory. This product includes software developed by the University of Illinois at Urbana and their contributors. This product includes software developed by the Urbana-Champaign Indepen- dent Media Center. This product includes software developed by the University of Vermont and State Agricultural College and Garrett A. Wollman. This product includes software developed by the University of Vermont and State Agricultural College and Garrett A. Wollman, by William F. Jolitz, and by the University of California, Berkeley, Lawrence Berkeley Labora- tory, and its contributors. This product includes software developed for the FreeBSD project This product includes software developed for the NetBSD Project by Bernd Ernesti. This product includes software developed for the NetBSD Project by Christopher G. Demetriou. This product includes software developed for the NetBSD Project by Emmanuel Dreyfus. This product includes software developed for the NetBSD Project by Frank van der Linden This product includes software developed for the NetBSD Project by Igna- tios Souvatzis. This product includes software developed for the NetBSD Project by Jason R. Thorpe. This product includes software developed for the NetBSD Project by John M. Vinopal. This product includes software developed by Kyma Systems. This product includes software developed for the NetBSD Project by Kyma Systems LLC. This product includes software developed for the NetBSD Project by Matthias Drochner. This product includes software developed for the NetBSD Project by Perry E. Metzger. This product includes software developed for the NetBSD Project by Scott Bartram and Frank van der Linden This product includes software developed for the NetBSD Project by Alle- gro Networks, Inc., and Wasabi Systems, Inc. This product includes software developed for the NetBSD Project by Genetec Corporation. This product includes software developed for the NetBSD Project by Jonathan Stone. This product includes software developed for the NetBSD Project by Pier- mont Information Systems Inc. This product includes software developed for the NetBSD Project by SUNET, Swedish University Computer Network. This product includes software developed for the NetBSD Project by Shigeyuki Fukushima. This product includes software developed for the NetBSD Project by Wasabi Systems, Inc. This product includes software developed under OpenBSD by Per Fogelstrom Opsycon AB for RTMX Inc, North Carolina, USA. This product includes software developed under OpenBSD by Per Fogelstrom. This software is a component of "386BSD" developed by William F. Jolitz, TeleMuse. This software was developed by Holger Veit and Brian Moore for use with "386BSD" and similar operating systems. "Similar operating systems" includes mainly non-profit oriented systems for research and education, including but not restricted to "NetBSD", "FreeBSD", "Mach" (by CMU). This software includes software developed by the Computer Systems Labora- tory at the University of Utah. This product includes software developed by Computing Services at Carnegie Mellon University (http://www.cmu.edu/computing/). This product includes software developed by Marshall M. Midden. This product includes software developed or owned by Caldera Interna- tional, Inc. The Institute of Electrical and Electronics Engineers and The Open Group, have given us permission to reprint portions of their documentation. In the following statement, the phrase ``this text'' refers to portions of the system documentation. Portions of this text are reprinted and reproduced in electronic form in NetBSD, from IEEE Std 1003.1, 2004 Edition, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 6, Copyright (C) 2001-2004 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between these versions and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html. This notice shall appear on any product containing this material This product includes software developed by Advanced Risc Machines Ltd. This product includes software developed by Microsoft. This product includes software developed by the RiscBSD kernel team. This product includes software developed by Scott Stevens. The End NetBSD September 22, 2014 NetBSD